amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x000000010000003c, cpu addr 0xffff8800d813803c
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x000000010000004c, cpu addr 0xffff8800d813804c
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000010000005c, cpu addr 0xffff8800d813805c
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x000000010000006c, cpu addr 0xffff8800d813806c
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x000000010000007c, cpu addr 0xffff8800d813807c
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x000000010000008c, cpu addr 0xffff8800d813808c
amdgpu 0000:01:00.0: firmware: using built-in firmware amdgpu/fiji_sdma.bin
amdgpu 0000:01:00.0: firmware: using built-in firmware amdgpu/fiji_sdma1.bin
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x000000010000009c, cpu addr 0xffff8800d813809c
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000ac, cpu addr 0xffff8800d81380ac
amdgpu 0000:01:00.0: firmware: using built-in firmware amdgpu/fiji_uvd.bin
[drm] Found UVD firmware Version: 1.52 Family ID: 10
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000088f7b0, cpu addr 0xffffc90002c4e7b0
amdgpu 0000:01:00.0: firmware: using built-in firmware amdgpu/fiji_vce.bin
[drm] Found VCE firmware Version: 48.0 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000cc, cpu addr 0xffff8800d81380cc
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000dc, cpu addr 0xffff8800d81380dc
[drm] probing gen 2 caps for device 1022:1425 = 733d02/e
[drm] [FM]start smu in protection mode
[drm] [FM]try triger smu start
[drm] [FM]smu started
[drm] [FM]smu initialized
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 20 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 5 usecs
usb 8-2: new full-speed USB device number 2 using ohci-pci
[drm] ring test on 11 succeeded in 2 usecs
[drm] UVD initialized successfully.
usb 6-1: new full-speed USB device number 2 using ohci-pci
[drm] ring test on 12 succeeded in 15 usecs
[drm] ring test on 13 succeeded in 3 usecs
[drm] VCE initialized successfully.
atkbd: probe of serio0 rejects match -19
bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
bus: 'serio': really_probe: probing driver atkbd with device serio1
atkbd serio1: no default pinctrl state
devices_kset: Moving serio1 to end of list
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=1
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=128
usb 8-2: New USB device found, idVendor=b58e, idProduct=9e84
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: Yeti Stereo Microphone
usb 8-2: Manufacturer: Blue Microphones
usb 8-2: SerialNumber: REV8
device: '8-2': device_add
bus: 'usb': add device 8-2
PM: Adding info for usb:8-2
bus: 'usb': driver_probe_device: matched device 8-2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 8-2
usb 8-2: no default pinctrl state
devices_kset: Moving 8-2 to end of list
device: '8-2:1.0': device_add
bus: 'usb': add device 8-2:1.0
PM: Adding info for usb:8-2:1.0
device: '8-2:1.1': device_add
bus: 'usb': add device 8-2:1.1
PM: Adding info for usb:8-2:1.1
device: '8-2:1.2': device_add
bus: 'usb': add device 8-2:1.2
PM: Adding info for usb:8-2:1.2
device: '8-2:1.3': device_add
bus: 'usb': add device 8-2:1.3
PM: Adding info for usb:8-2:1.3
bus: 'usb': driver_probe_device: matched device 8-2:1.3 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 8-2:1.3
usbhid 8-2:1.3: no default pinctrl state
devices_kset: Moving 8-2:1.3 to end of list
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=128
device: '0003:B58E:9E84.0001': device_add
bus: 'hid': add device 0003:B58E:9E84.0001
PM: Adding info for hid:0003:B58E:9E84.0001
bus: 'hid': driver_probe_device: matched device 0003:B58E:9E84.0001 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:B58E:9E84.0001
hid-generic 0003:B58E:9E84.0001: no default pinctrl state
devices_kset: Moving 0003:B58E:9E84.0001 to end of list
device: 'input17': device_add
PM: Adding info for No Bus:input17
input: Blue Microphones Yeti Stereo Microphone as /devices/pci0000:00/0000:00:16.0/usb8/8-2/8-2:1.3/0003:B58E:9E84.0001/input/input17
i2c i2c-5: master_xfer[0] W, addr=0x50, len=1
i2c i2c-5: master_xfer[1] R, addr=0x50, len=8
i2c i2c-5: NAK from device addr 0x50 msg #0
[drm] fb mappable at 0xE0C73000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
device: 'fb0': device_add
PM: Adding info for No Bus:fb0
fbcon: amdgpudrmfb (fb0) is primary device
device: 'vtcon1': device_add
PM: Adding info for No Bus:vtcon1
device: 'event15': device_add
PM: Adding info for No Bus:event15
device class 'usbmisc': registering
device: 'hiddev0': device_add
PM: Adding info for No Bus:hiddev0
device: 'hidraw0': device_add
PM: Adding info for No Bus:hidraw0
hid-generic 0003:B58E:9E84.0001: input,hiddev0,hidraw0: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:00:16.0-2/input3
driver: 'hid-generic': driver_bound: bound to device '0003:B58E:9E84.0001'
bus: 'hid': really_probe: bound device 0003:B58E:9E84.0001 to driver hid-generic
driver: 'usbhid': driver_bound: bound to device '8-2:1.3'
bus: 'usb': really_probe: bound device 8-2:1.3 to driver usbhid
device: 'ep_87': device_add
PM: Adding info for No Bus:ep_87
driver: 'usb': driver_bound: bound to device '8-2'
bus: 'usb': really_probe: bound device 8-2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=1
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=128
i2c i2c-8: master_xfer[0] W, addr=0x50, len=1
i2c i2c-8: master_xfer[1] R, addr=0x50, len=128
usb 6-1: New USB device found, idVendor=ffc0, idProduct=0004
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: G-Receiver
usb 6-1: Manufacturer: Areson
device: '6-1': device_add
bus: 'usb': add device 6-1
PM: Adding info for usb:6-1
bus: 'usb': driver_probe_device: matched device 6-1 with driver usb
bus: 'usb': really_probe: probing driver usb with device 6-1
usb 6-1: no default pinctrl state
devices_kset: Moving 6-1 to end of list
device: '6-1:1.0': device_add
bus: 'usb': add device 6-1:1.0
PM: Adding info for usb:6-1:1.0
bus: 'usb': driver_probe_device: matched device 6-1:1.0 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 6-1:1.0
usbhid 6-1:1.0: no default pinctrl state
devices_kset: Moving 6-1:1.0 to end of list
device: '0003:FFC0:0004.0002': device_add
bus: 'hid': add device 0003:FFC0:0004.0002
PM: Adding info for hid:0003:FFC0:0004.0002
bus: 'hid': driver_probe_device: matched device 0003:FFC0:0004.0002 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:FFC0:0004.0002
hid-generic 0003:FFC0:0004.0002: no default pinctrl state
devices_kset: Moving 0003:FFC0:0004.0002 to end of list
device: 'input18': device_add
PM: Adding info for No Bus:input18
input: Areson G-Receiver as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:FFC0:0004.0002/input/input18
device: 'mouse0': device_add
PM: Adding info for No Bus:mouse0
device: 'event16': device_add
PM: Adding info for No Bus:event16
device: 'hidraw1': device_add
PM: Adding info for No Bus:hidraw1
hid-generic 0003:FFC0:0004.0002: input,hidraw1: USB HID v1.00 Mouse [Areson G-Receiver] on usb-0000:00:12.0-1/input0
driver: 'hid-generic': driver_bound: bound to device '0003:FFC0:0004.0002'
bus: 'hid': really_probe: bound device 0003:FFC0:0004.0002 to driver hid-generic
driver: 'usbhid': driver_bound: bound to device '6-1:1.0'
bus: 'usb': really_probe: bound device 6-1:1.0 to driver usbhid
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
device: '6-1:1.1': device_add
bus: 'usb': add device 6-1:1.1
PM: Adding info for usb:6-1:1.1
bus: 'usb': driver_probe_device: matched device 6-1:1.1 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 6-1:1.1
usbhid 6-1:1.1: no default pinctrl state
devices_kset: Moving 6-1:1.1 to end of list
device: '0003:FFC0:0004.0003': device_add
bus: 'hid': add device 0003:FFC0:0004.0003
PM: Adding info for hid:0003:FFC0:0004.0003
bus: 'hid': driver_probe_device: matched device 0003:FFC0:0004.0003 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:FFC0:0004.0003
hid-generic 0003:FFC0:0004.0003: no default pinctrl state
devices_kset: Moving 0003:FFC0:0004.0003 to end of list
device: 'input19': device_add
PM: Adding info for No Bus:input19
input: Areson G-Receiver as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:FFC0:0004.0003/input/input19
atkbd: probe of serio1 rejects match -19
bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse
bus: 'serio': really_probe: probing driver psmouse with device serio1
psmouse serio1: no default pinctrl state
devices_kset: Moving serio1 to end of list
i2c i2c-5: master_xfer[0] W, addr=0x50, len=1
i2c i2c-5: master_xfer[1] R, addr=0x50, len=8
i2c i2c-5: NAK from device addr 0x50 msg #0
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded in 0 usecs
[drm] ib test on ring 6 succeeded in 0 usecs
[drm] ib test on ring 7 succeeded in 0 usecs
[drm] ib test on ring 8 succeeded in 0 usecs
[drm] ib test on ring 9 succeeded in 0 usecs
[drm] ib test on ring 10 succeeded in 0 usecs
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] Initialized amdgpu 3.1.0 20150101 for 0000:01:00.0 on minor 0
driver: 'amdgpu': driver_bound: bound to device '0000:01:00.0'
bus: 'pci': really_probe: bound device 0000:01:00.0 to driver amdgpu
device: 'event17': device_add
PM: Adding info for No Bus:event17
device: 'hiddev1': device_add
PM: Adding info for No Bus:hiddev1
device: 'hidraw2': device_add
PM: Adding info for No Bus:hidraw2
hid-generic 0003:FFC0:0004.0003: input,hiddev0,hidraw2: USB HID v1.00 Keyboard [Areson G-Receiver] on usb-0000:00:12.0-1/input1
driver: 'hid-generic': driver_bound: bound to device '0003:FFC0:0004.0003'
bus: 'hid': really_probe: bound device 0003:FFC0:0004.0003 to driver hid-generic
driver: 'usbhid': driver_bound: bound to device '6-1:1.1'
bus: 'usb': really_probe: bound device 6-1:1.1 to driver usbhid
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
driver: 'usb': driver_bound: bound to device '6-1'
bus: 'usb': really_probe: bound device 6-1 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
psmouse: probe of serio1 rejects match -19
tsc: Refined TSC clocksource calibration: 3605.026 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33f6df885e5, max_idle_ns: 440795278827 ns
usb 8-4: new low-speed USB device number 3 using ohci-pci
usb 6-2: new full-speed USB device number 3 using ohci-pci
usb 8-4: device descriptor read/64, error -62
usb 6-2: New USB device found, idVendor=046d, idProduct=c52b
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB Receiver
usb 6-2: Manufacturer: Logitech
device: '6-2': device_add
bus: 'usb': add device 6-2
PM: Adding info for usb:6-2
bus: 'usb': driver_probe_device: matched device 6-2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 6-2
usb 6-2: no default pinctrl state
devices_kset: Moving 6-2 to end of list
device: '6-2:1.0': device_add
bus: 'usb': add device 6-2:1.0
PM: Adding info for usb:6-2:1.0
bus: 'usb': driver_probe_device: matched device 6-2:1.0 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 6-2:1.0
usbhid 6-2:1.0: no default pinctrl state
devices_kset: Moving 6-2:1.0 to end of list
device: '0003:046D:C52B.0004': device_add
bus: 'hid': add device 0003:046D:C52B.0004
PM: Adding info for hid:0003:046D:C52B.0004
bus: 'hid': driver_probe_device: matched device 0003:046D:C52B.0004 with driver logitech-djreceiver
bus: 'hid': really_probe: probing driver logitech-djreceiver with device 0003:046D:C52B.0004
logitech-djreceiver 0003:046D:C52B.0004: no default pinctrl state
devices_kset: Moving 0003:046D:C52B.0004 to end of list
logitech-djreceiver: probe of 0003:046D:C52B.0004 rejects match -19
driver: 'usbhid': driver_bound: bound to device '6-2:1.0'
bus: 'usb': really_probe: bound device 6-2:1.0 to driver usbhid
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
device: '6-2:1.1': device_add
bus: 'usb': add device 6-2:1.1
PM: Adding info for usb:6-2:1.1
bus: 'usb': driver_probe_device: matched device 6-2:1.1 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 6-2:1.1
usbhid 6-2:1.1: no default pinctrl state
devices_kset: Moving 6-2:1.1 to end of list
device: '0003:046D:C52B.0005': device_add
bus: 'hid': add device 0003:046D:C52B.0005
PM: Adding info for hid:0003:046D:C52B.0005
bus: 'hid': driver_probe_device: matched device 0003:046D:C52B.0005 with driver logitech-djreceiver
bus: 'hid': really_probe: probing driver logitech-djreceiver with device 0003:046D:C52B.0005
logitech-djreceiver 0003:046D:C52B.0005: no default pinctrl state
devices_kset: Moving 0003:046D:C52B.0005 to end of list
logitech-djreceiver: probe of 0003:046D:C52B.0005 rejects match -19
driver: 'usbhid': driver_bound: bound to device '6-2:1.1'
bus: 'usb': really_probe: bound device 6-2:1.1 to driver usbhid
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
device: '6-2:1.2': device_add
bus: 'usb': add device 6-2:1.2
PM: Adding info for usb:6-2:1.2
bus: 'usb': driver_probe_device: matched device 6-2:1.2 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 6-2:1.2
usbhid 6-2:1.2: no default pinctrl state
devices_kset: Moving 6-2:1.2 to end of list
device: '0003:046D:C52B.0006': device_add
bus: 'hid': add device 0003:046D:C52B.0006
PM: Adding info for hid:0003:046D:C52B.0006
bus: 'hid': driver_probe_device: matched device 0003:046D:C52B.0006 with driver logitech-djreceiver
bus: 'hid': really_probe: probing driver logitech-djreceiver with device 0003:046D:C52B.0006
logitech-djreceiver 0003:046D:C52B.0006: no default pinctrl state
devices_kset: Moving 0003:046D:C52B.0006 to end of list
device: 'hiddev2': device_add
PM: Adding info for No Bus:hiddev2
device: 'hidraw3': device_add
PM: Adding info for No Bus:hidraw3
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
usb 8-4: device descriptor read/64, error -62
driver: 'logitech-djreceiver': driver_bound: bound to device '0003:046D:C52B.0006'
bus: 'hid': really_probe: bound device 0003:046D:C52B.0006 to driver logitech-djreceiver
driver: 'usbhid': driver_bound: bound to device '6-2:1.2'
bus: 'usb': really_probe: bound device 6-2:1.2 to driver usbhid
device: 'ep_83': device_add
PM: Adding info for No Bus:ep_83
driver: 'usb': driver_bound: bound to device '6-2'
bus: 'usb': really_probe: bound device 6-2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
device: '0003:046D:4002.0007': device_add
bus: 'hid': add device 0003:046D:4002.0007
PM: Adding info for hid:0003:046D:4002.0007
bus: 'hid': driver_probe_device: matched device 0003:046D:4002.0007 with driver logitech-hidpp-device
bus: 'hid': really_probe: probing driver logitech-hidpp-device with device 0003:046D:4002.0007
logitech-hidpp-device 0003:046D:4002.0007: no default pinctrl state
devices_kset: Moving 0003:046D:4002.0007 to end of list
device: 'input21': device_add
PM: Adding info for No Bus:input21
input: Logitech K750 as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0006/0003:046D:4002.0007/input/input21
device: 'event18': device_add
PM: Adding info for No Bus:event18
device: 'hidraw4': device_add
PM: Adding info for No Bus:hidraw4
logitech-hidpp-device 0003:046D:4002.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K750] on usb-0000:00:12.0-2:1
driver: 'logitech-hidpp-device': driver_bound: bound to device '0003:046D:4002.0007'
bus: 'hid': really_probe: bound device 0003:046D:4002.0007 to driver logitech-hidpp-device
scsi 8:0:0:0: Direct-Access     Lexar    JumpDrive        1.00 PQ: 0 ANSI: 6
device: 'target8:0:0': device_add
bus: 'scsi': add device target8:0:0
PM: Adding info for scsi:target8:0:0
device: '8:0:0:0': device_add
bus: 'scsi': add device 8:0:0:0
PM: Adding info for scsi:8:0:0:0
bus: 'scsi': driver_probe_device: matched device 8:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 8:0:0:0
sd 8:0:0:0: no default pinctrl state
devices_kset: Moving 8:0:0:0 to end of list
device: '8:0:0:0': device_add
PM: Adding info for No Bus:8:0:0:0
driver: 'sd': driver_bound: bound to device '8:0:0:0'
bus: 'scsi': really_probe: bound device 8:0:0:0 to driver sd
device: '8:0:0:0': device_add
PM: Adding info for No Bus:8:0:0:0
device: 'sg1': device_add
PM: Adding info for No Bus:sg1
sd 8:0:0:0: Attached scsi generic sg1 type 0
device: '8:0:0:0': device_add
PM: Adding info for No Bus:8:0:0:0
sd 8:0:0:0: [sdb] 62531584 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
device: '8:16': device_add
PM: Adding info for No Bus:8:16
device: 'sdb': device_add
PM: Adding info for No Bus:sdb
 sdb: sdb1
device: 'sdb1': device_add
PM: Adding info for No Bus:sdb1
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 8-4: new low-speed USB device number 4 using ohci-pci
usb 8-4: device descriptor read/64, error -62
clocksource: Switched to clocksource tsc
usb 8-4: device descriptor read/64, error -62
usb 8-4: new low-speed USB device number 5 using ohci-pci
usb 8-4: device not accepting address 5, error -62
usb 8-4: new low-speed USB device number 6 using ohci-pci
usb 8-4: device not accepting address 6, error -62
usb usb8-port4: unable to enumerate USB device
bus: 'snd_seq': registered
bus: 'usb': add driver snd-usb-audio
bus: 'usb': driver_probe_device: matched device 8-2:1.0 with driver snd-usb-audio
bus: 'usb': really_probe: probing driver snd-usb-audio with device 8-2:1.0
snd-usb-audio 8-2:1.0: no default pinctrl state
devices_kset: Moving 8-2:1.0 to end of list
device: 'ep_01': device_add
PM: Adding info for No Bus:ep_01
device: 'ep_01': device_unregister
PM: Removing info for No Bus:ep_01
driver: 'snd-usb-audio': driver_bound: bound to device '8-2:1.1'
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
device: 'ep_82': device_unregister
PM: Removing info for No Bus:ep_82
driver: 'snd-usb-audio': driver_bound: bound to device '8-2:1.2'
device: 'card1': device_add
PM: Adding info for No Bus:card1
device: 'controlC1': device_add
PM: Adding info for No Bus:controlC1
device: 'pcmC1D0p': device_add
PM: Adding info for No Bus:pcmC1D0p
device: 'pcmC1D0c': device_add
PM: Adding info for No Bus:pcmC1D0c
driver: 'snd-usb-audio': driver_bound: bound to device '8-2:1.0'
bus: 'usb': really_probe: bound device 8-2:1.0 to driver snd-usb-audio
usbcore: registered new interface driver snd-usb-audio
device-mapper: uevent: version 1.0.3
device: 'device-mapper': device_add
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
random: nonblocking pool is initialized
FAT-fs (sdb): invalid media value (0xb9)
FAT-fs (sdb): Can't find a valid FAT filesystem
FAT-fs (sdb): invalid media value (0xb9)
FAT-fs (sdb): Can't find a valid FAT filesystem
jfs: Unrecognized mount option "utf8" or missing value
XFS (sdb): unknown mount option [utf8].
F2FS-fs (sdb): Magic Mismatch, valid(0xf2f52010) - read(0x0)
F2FS-fs (sdb): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (sdb): Magic Mismatch, valid(0xf2f52010) - read(0x0)
F2FS-fs (sdb): Can't find valid F2FS filesystem in 2th superblock
F2FS-fs (sdb): Magic Mismatch, valid(0xf2f52010) - read(0x0)
F2FS-fs (sdb): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (sdb): Magic Mismatch, valid(0xf2f52010) - read(0x0)
F2FS-fs (sdb): Can't find valid F2FS filesystem in 2th superblock
__allocate_fw_buf: fw-rtl_nic/rtl8168g-2.fw buf=ffff88040a616840
r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
fw_set_page_data: fw-rtl_nic/rtl8168g-2.fw buf=ffff88040a616840 data=ffffc90002bf9000 size=4896
r8169 0000:05:00.0 eth1: link down
r8169 0000:05:00.0 eth1: link down
r8169 0000:05:00.0 eth1: link up
NET: Registered protocol family 10
device: 'vcs6': device_add
PM: Adding info for No Bus:vcs6
device: 'vcsa6': device_add
PM: Adding info for No Bus:vcsa6
device: 'vcs2': device_add
PM: Adding info for No Bus:vcs2
device: 'vcsa2': device_add
PM: Adding info for No Bus:vcsa2
device: 'vcs3': device_add
PM: Adding info for No Bus:vcs3
device: 'vcsa3': device_add
PM: Adding info for No Bus:vcsa3
device: 'vcs4': device_add
PM: Adding info for No Bus:vcs4
device: 'vcsa4': device_add
PM: Adding info for No Bus:vcsa4
device: 'vcs5': device_add
PM: Adding info for No Bus:vcs5
device: 'vcsa5': device_add
PM: Adding info for No Bus:vcsa5