[ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x033d3000, 0x033d3fff] PGTABLE [ 0.000000] BRK [0x033d4000, 0x033d4fff] PGTABLE [ 0.000000] BRK [0x033d5000, 0x033d5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff] [ 0.000000] [mem 0x14ee00000-0x14effffff] page 2M [ 0.000000] BRK [0x033d6000, 0x033d6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x140000000-0x14edfffff] [ 0.000000] [mem 0x140000000-0x14edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff] [ 0.000000] [mem 0x120000000-0x13fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xabffffff] page 2M [ 0.000000] [mem 0xac000000-0xac1dbfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff] [ 0.000000] [mem 0xac7e2000-0xac7fefff] page 4k [ 0.000000] BRK [0x033d7000, 0x033d7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 1G [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AC7A8188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000AC7B3000 01FA7F (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AC77E000 000040 [ 0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v02 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v02 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v02 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AC7B2000 000250 (v02 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AE000 00342F (v02 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AD000 000C7D (v02 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AC000 00017F (v02 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AC7AB000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7AA000 00057D (v02 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A9000 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A0000 00712A (v02 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A8 (v02 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AC79F000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC79E000 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AC79D000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AC79C000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AC79B000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AC79A000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AC799000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x14effa000-0x14effdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000014effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ac1dbfff] [ 0.000000] node 0: [mem 0x00000000ac7e2000-0x00000000ac7fefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000014effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014effffff] [ 0.000000] On node 0 totalpages: 1028502 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10952 pages used for memmap [ 0.000000] DMA32 zone: 700921 pages, LIFO batch:31 [ 0.000000] Normal zone: 5056 pages used for memmap [ 0.000000] Normal zone: 323584 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88014ec00000 s82904 r8192 d31784 u262144 [ 0.000000] pcpu-alloc: s82904 r8192 d31784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012404 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2015_04_02/drm-intel-nightly/a8ae893a17d719d324779cfbacd6eac28356c62f/bzImage_x86_64 root=/dev/sda3 drm.debug=0xe hostname=x-bdw05 modules_path=kernels//nightly_parents/2015_04_02/drm-intel-nightly/a8ae893a17d719d324779cfbacd6eac28356c62f/modules_x86_64/lib/modules/4.0.0-rc6_drm-intel-nightly_a8ae89_20150402+ acpi_rsdp=0xac7e1014 kexec_jump_back_entry=0xe5e862fa [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3944516K/4114008K available (7805K kernel code, 887K rwdata, 4016K rodata, 23300K init, 624K bss, 169492K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:760 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.532 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.06 BogoMIPS (lpj=2294532) [ 0.000009] pid_max: default: 32768 minimum: 301 [ 0.000014] ACPI: Core revision 20150204 [ 0.024756] ACPI: All ACPI Tables successfully acquired [ 0.024782] Security Framework initialized [ 0.025017] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.025810] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026161] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026169] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026364] CPU: Physical Processor ID: 0 [ 0.026368] CPU: Processor Core ID: 0 [ 0.027407] mce: CPU supports 7 MCE banks [ 0.027418] CPU0: Thermal LVT vector (0xfa) already installed [ 0.027425] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.027429] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.027810] Freeing SMP alternatives memory: 32K (ffffffff8332e000 - ffffffff83336000) [ 0.028480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038492] TSC deadline timer enabled [ 0.038495] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (fam: 06, model: 3d, stepping: 04) [ 0.038522] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.038531] ... version: 3 [ 0.038534] ... bit width: 48 [ 0.038537] ... generic registers: 4 [ 0.038540] ... value mask: 0000ffffffffffff [ 0.038543] ... max period: 0000ffffffffffff [ 0.038546] ... fixed-purpose events: 3 [ 0.038549] ... event mask: 000000070000000f [ 0.038790] x86: Booting SMP configuration: [ 0.038794] .... node #0, CPUs: #1 [ 0.050983] CPU1: Thermal LVT vector (0xfa) already installed [ 0.053068] #2<7>[ 0.065258] CPU2: Thermal LVT vector (0xfa) already installed [ 0.079529] #3 [ 0.079529] CPU3: Thermal LVT vector (0xfa) already installed [ 0.081565] x86: Booted up 1 node, 4 CPUs [ 0.081573] smpboot: Total of 4 processors activated (18356.25 BogoMIPS) [ 0.084941] devtmpfs: initialized [ 0.085293] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes) [ 0.085431] xor: automatically using best checksumming function: [ 0.094748] avx : 22280.000 MB/sec [ 0.094787] RTC time: 14:43:08, date: 04/02/15 [ 0.094885] NET: Registered protocol family 16 [ 0.101784] cpuidle: using governor ladder [ 0.109805] cpuidle: using governor menu [ 0.109939] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.109944] ACPI: bus type PCI registered [ 0.109982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.109987] PCI: not using MMCONFIG [ 0.109991] PCI: Using configuration type 1 for base access [ 0.129830] raid6: sse2x1 6949 MB/s [ 0.146839] raid6: sse2x2 8554 MB/s [ 0.163853] raid6: sse2x4 10265 MB/s [ 0.180866] raid6: avx2x1 13562 MB/s [ 0.197881] raid6: avx2x2 15910 MB/s [ 0.214893] raid6: avx2x4 18625 MB/s [ 0.214896] raid6: using algorithm avx2x4 (18625 MB/s) [ 0.214899] raid6: using avx2x2 recovery algorithm [ 0.214939] ACPI: Added _OSI(Module Device) [ 0.214942] ACPI: Added _OSI(Processor Device) [ 0.214945] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.214948] ACPI: Added _OSI(Processor Aggregator Device) [ 0.221651] ACPI: Executed 19 blocks of module-level executable AML code [ 0.227386] ACPI: Dynamic OEM Table Load: [ 0.227404] ACPI: SSDT 0xFFFF880148D69800 0004AE (v02 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.228379] ACPI: Dynamic OEM Table Load: [ 0.228395] ACPI: SSDT 0xFFFF880148D6A000 000792 (v02 PmRef ApIst 00003000 INTL 20130927) [ 0.229461] ACPI: Dynamic OEM Table Load: [ 0.229474] ACPI: SSDT 0xFFFF880148D56600 000119 (v02 PmRef ApCst 00003000 INTL 20130927) [ 0.232956] ACPI: Interpreter enabled [ 0.232966] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.232976] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.232999] ACPI: (supports S0 S3 S4 S5) [ 0.233002] ACPI: Using IOAPIC for interrupt routing [ 0.233025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.234821] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.235036] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.235467] ACPI: Power Resource [PG00] (on) [ 0.235929] ACPI: Power Resource [PG01] (on) [ 0.236366] ACPI: Power Resource [PG02] (on) [ 0.252680] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.253827] ACPI: Power Resource [FN00] (off) [ 0.253898] ACPI: Power Resource [FN01] (off) [ 0.253968] ACPI: Power Resource [FN02] (off) [ 0.254036] ACPI: Power Resource [FN03] (off) [ 0.254102] ACPI: Power Resource [FN04] (off) [ 0.255021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.255028] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.255762] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.256033] PCI host bridge to bus 0000:00 [ 0.256038] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.256042] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.256046] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.256050] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.256056] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.256067] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.256278] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.256289] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.256296] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.256300] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.256501] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.256509] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit] [ 0.256727] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.256744] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit] [ 0.256802] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.256966] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.257010] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.257027] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit] [ 0.257089] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.257286] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.257301] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff] [ 0.257309] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff] [ 0.257316] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.257374] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.257534] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.257581] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.257872] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.257886] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.257893] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.257899] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.257906] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.257912] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.257919] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff] [ 0.257957] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258140] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.258154] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit] [ 0.258172] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.258375] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.258402] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit] [ 0.258662] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.260598] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.260649] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.260697] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.260745] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.260792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.260839] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.260888] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.260935] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.261401] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.261588] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.261684] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.261689] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.261694] vgaarb: loaded [ 0.261697] vgaarb: bridge control possible 0000:00:02.0 [ 0.261770] SCSI subsystem initialized [ 0.261815] libata version 3.00 loaded. [ 0.261870] ACPI: bus type USB registered [ 0.261898] usbcore: registered new interface driver usbfs [ 0.261910] usbcore: registered new interface driver hub [ 0.261930] usbcore: registered new device driver usb [ 0.261965] pps_core: LinuxPPS API ver. 1 registered [ 0.261968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.261978] PTP clock support registered [ 0.262046] PCI: Using ACPI for IRQ routing [ 0.267372] PCI: pci_cache_line_size set to 64 bytes [ 0.267396] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.267398] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.267399] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff] [ 0.267401] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff] [ 0.267402] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff] [ 0.267509] NetLabel: Initializing [ 0.267512] NetLabel: domain hash size = 128 [ 0.267515] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.267529] NetLabel: unlabeled traffic allowed by default [ 0.267668] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.267676] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.269702] Switched to clocksource hpet [ 0.273075] pnp: PnP ACPI init [ 0.273353] system 00:00: [io 0x06a4] has been reserved [ 0.273357] system 00:00: [io 0x06a0] has been reserved [ 0.273363] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273526] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.273530] system 00:01: [io 0xffff] has been reserved [ 0.273534] system 00:01: [io 0xffff] has been reserved [ 0.273538] system 00:01: [io 0xffff] has been reserved [ 0.273542] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.273546] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.273550] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273593] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.273625] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.273630] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.273742] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.273812] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.274349] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.274354] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.274358] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.274362] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.274366] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.274370] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.274374] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.274378] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.275367] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.275372] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.275376] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.275380] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.275384] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.275388] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.275392] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.275396] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.275400] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.275404] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.275408] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved [ 0.275412] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved [ 0.275416] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.275636] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.275641] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.275771] pnp: PnP ACPI: found 9 devices [ 0.281956] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.281958] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.281960] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.281962] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 0.281987] NET: Registered protocol family 2 [ 0.282160] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.282233] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.282295] TCP: Hash tables configured (established 32768 bind 32768) [ 0.282315] TCP: reno registered [ 0.282324] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.282340] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.282389] NET: Registered protocol family 1 [ 0.282458] RPC: Registered named UNIX socket transport module. [ 0.282464] RPC: Registered udp transport module. [ 0.282468] RPC: Registered tcp transport module. [ 0.282471] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.282490] pci 0000:00:02.0: Video device with shadowed ROM [ 0.282569] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.282573] pci 0000:00:14.0: PCI INT A: no GSI [ 0.282612] PCI: CLS 0 bytes, default 64 [ 0.687529] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.687537] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff] [ 0.687678] Simple Boot Flag at 0x47 set to 0x80 [ 0.688334] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.688367] audit: initializing netlink subsys (disabled) [ 0.688384] audit: type=2000 audit(1427985788.652:1): initialized [ 0.688573] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.690122] VFS: Disk quotas dquot_6.5.2 [ 0.690158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.690732] NFS: Registering the id_resolver key type [ 0.690741] Key type id_resolver registered [ 0.690745] Key type id_legacy registered [ 0.690751] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.690887] fuse init (API version 7.23) [ 0.691183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.691192] io scheduler noop registered [ 0.691198] io scheduler deadline registered [ 0.691229] io scheduler cfq registered (default) [ 0.691307] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.691340] efifb: probing for efifb [ 0.691358] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k [ 0.691364] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.691367] efifb: scrolling: redraw [ 0.691370] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.696569] Console: switching to colour frame buffer device 240x67 [ 0.701397] fb0: EFI VGA frame buffer device [ 0.702204] Monitor-Mwait will be used to enter C-1 state [ 0.731074] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.731101] ACPI: Thermal Zone [TZ00] (43 C) [ 0.731703] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.731728] ACPI: Thermal Zone [TZ01] (43 C) [ 0.731791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.752416] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.752864] Non-volatile memory driver v1.3 [ 0.752914] Linux agpgart interface v0.103 [ 0.754333] brd: module loaded [ 0.754403] Loading iSCSI transport class v2.0-870. [ 0.754563] iscsi: registered transport (tcp) [ 0.754660] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.754695] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.754780] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 0.754840] iscsi: registered transport (qla4xxx) [ 0.754870] QLogic iSCSI HBA Driver [ 0.754925] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.754986] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.755020] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.755073] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.755115] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.755115] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.755216] SCSI Media Changer driver v0.25 [ 0.755267] ahci 0000:00:1f.2: version 3.0 [ 0.765463] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.765498] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.765876] scsi host0: ahci [ 0.765967] scsi host1: ahci [ 0.766052] scsi host2: ahci [ 0.766144] scsi host3: ahci [ 0.766193] ata1: DUMMY [ 0.766208] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40 [ 0.766239] ata3: DUMMY [ 0.766251] ata4: DUMMY [ 0.766950] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10) [ 0.767062] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.767094] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.768241] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.769383] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.770533] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.771672] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.772921] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.938918] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.940066] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 [ 0.941213] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.942395] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.943562] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k [ 0.944718] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.945894] usbcore: registered new interface driver catc [ 0.947049] usbcore: registered new interface driver kaweth [ 0.948176] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.949332] usbcore: registered new interface driver pegasus [ 0.950492] usbcore: registered new interface driver rtl8150 [ 0.951650] usbcore: registered new interface driver asix [ 0.952792] usbcore: registered new interface driver ax88179_178a [ 0.953927] usbcore: registered new interface driver cdc_ether [ 0.955047] usbcore: registered new interface driver dm9601 [ 0.956147] usbcore: registered new interface driver gl620a [ 0.957230] usbcore: registered new interface driver net1080 [ 0.958299] usbcore: registered new interface driver plusb [ 0.959359] usbcore: registered new interface driver rndis_host [ 0.960406] usbcore: registered new interface driver cdc_subset [ 0.961437] usbcore: registered new interface driver zaurus [ 0.962456] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.963482] usbcore: registered new interface driver cdc_ncm [ 0.964620] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.965627] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 0.966634] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.967648] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.968712] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00001810 [ 0.969710] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.969772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.970775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.971781] usb usb1: Product: xHCI Host Controller [ 0.972784] usb usb1: Manufacturer: Linux 4.0.0-rc6_drm-intel-nightly_a8ae89_20150402+ xhci-hcd [ 0.973812] usb usb1: SerialNumber: 0000:00:14.0 [ 0.974922] hub 1-0:1.0: USB hub found [ 0.975931] hub 1-0:1.0: 11 ports detected [ 0.979970] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.980998] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.982018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.983019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.984017] usb usb2: Product: xHCI Host Controller [ 0.985007] usb usb2: Manufacturer: Linux 4.0.0-rc6_drm-intel-nightly_a8ae89_20150402+ xhci-hcd [ 0.986016] usb usb2: SerialNumber: 0000:00:14.0 [ 0.987108] hub 2-0:1.0: USB hub found [ 0.988107] hub 2-0:1.0: 4 ports detected [ 0.989833] usb: failed to peer usb2-port3 and usb1-port11 by location (usb2-port3:none) (usb1-port11:usb2-port2) [ 0.990844] usb usb2-port3: failed to peer to usb1-port11 (-16) [ 0.991843] usb: port power management may be unreliable [ 0.993268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.994304] ehci-pci: EHCI PCI platform driver [ 0.995369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.996431] ohci-pci: OHCI PCI platform driver [ 0.997490] uhci_hcd: USB Universal Host Controller Interface driver [ 0.998584] usbcore: registered new interface driver usb-storage [ 0.999686] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.000745] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.002213] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.003354] mousedev: PS/2 mouse device common for all mice [ 1.004499] rtc_cmos 00:02: RTC can wake from S4 [ 1.005689] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.006775] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.007855] i2c /dev entries driver [ 1.008924] hidraw: raw HID events driver (C) Jiri Kosina [ 1.010233] usbcore: registered new interface driver usbhid [ 1.011285] usbhid: USB HID core driver [ 1.012390] TCP: cubic registered [ 1.013428] Initializing XFRM netlink socket [ 1.014467] NET: Registered protocol family 17 [ 1.015518] Key type dns_resolver registered [ 1.016913] registered taskstats version 1 [ 1.018342] Btrfs loaded [ 1.019758] Magic number: 11:305:737 [ 1.020877] PM: Hibernation image not present or could not be loaded. [ 1.020890] Warning: unable to open an initial console. [ 1.040977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.071286] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.072594] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.073676] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.075038] ata2.00: configured for UDMA/133 [ 1.076225] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.077524] ata2.00: Enabling discard_zeroes_data [ 1.077540] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.079850] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.081022] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.082237] sd 1:0:0:0: [sda] Write Protect is off [ 1.083420] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.083430] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.084713] ata2.00: Enabling discard_zeroes_data [ 1.086221] sda: sda1 sda2 sda3 [ 1.087576] ata2.00: Enabling discard_zeroes_data [ 1.088815] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.093192] Freeing unused kernel memory: 23300K (ffffffff81c6d000 - ffffffff8332e000) [ 1.123645] dracut: dracut-018-35.git20120510.fc17 [ 1.148309] udevd[1444]: starting version 182 [ 1.162459] [drm] Initialized drm 1.1.0 20060810 [ 1.165650] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.169124] ACPI: Lid Switch [LID0] [ 1.171103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.172419] ACPI: Power Button [PWRB] [ 1.173762] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.175091] ACPI: Sleep Button [SLPB] [ 1.176506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.176541] ACPI: Power Button [PWRF] [ 1.180155] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.180155] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 1.180227] [drm] Memory usable by graphics device = 4096M [ 1.180228] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.180229] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.180230] [drm:i915_gem_gtt_init] ppgtt mode: 2 [ 1.180232] checking generic (c0000000 7e9000) vs hw (c0000000 10000000) [ 1.180233] fb: switching to inteldrmfb from EFI VGA [ 1.188656] Console: switching to colour dummy device 80x25 [ 1.188866] [drm] Replacing VGA console driver [ 1.189619] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018 [ 1.189627] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.189628] [drm:intel_opregion_setup] SWSCI supported [ 1.195213] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.195214] [drm:intel_opregion_setup] ASLE supported [ 1.195302] [drm:intel_device_info_runtime_init] slice total: 0 [ 1.195304] [drm:intel_device_info_runtime_init] subslice total: 0 [ 1.195305] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 1.195306] [drm:intel_device_info_runtime_init] EU total: 0 [ 1.195307] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 1.195308] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.195309] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 1.195311] [drm:intel_device_info_runtime_init] has EU power gating: n [ 1.195312] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.195316] [drm] Driver supports precise vblank timestamp query. [ 1.195320] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.195322] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.195324] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.195326] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.195327] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.195330] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.195332] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.195334] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.195336] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.195339] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.195342] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.195344] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.195347] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.195350] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.195352] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.195354] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.195355] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.195357] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.195358] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.195414] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.195419] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000 [ 1.195421] [drm:intel_display_power_get] enabling always-on [ 1.195422] [drm:intel_display_power_get] enabling display [ 1.195485] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.195487] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.195488] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.195490] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.195491] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.195492] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.195494] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.195495] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.195496] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.195497] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.195499] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.195500] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.195501] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.195503] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.195504] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.195506] [drm:intel_modeset_init] 3 display pipes available. [ 1.195516] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 1.195519] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.195833] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.195890] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 1.195893] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.195896] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.195897] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.195900] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.195983] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.195989] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.196397] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.196694] [drm:intel_dp_print_rates] source rates: 162000,270000,540000, [ 1.196696] [drm:intel_dp_print_rates] sink rates: 162000,270000, [ 1.196697] [drm:intel_dp_print_rates] common rates: 162000,270000, [ 1.196707] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.202523] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.202524] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 1.202531] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 1.202542] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.202591] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.208212] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled [ 1.208215] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled [ 1.208217] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled [ 1.208219] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 1.208221] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.208225] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: enabled, pipe A [ 1.208227] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 1.208228] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DP MST-41] hw state readout: disabled, pipe A [ 1.208230] [drm:intel_modeset_readout_hw_state] [ENCODER:42:DP MST-42] hw state readout: disabled, pipe B [ 1.208231] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP MST-43] hw state readout: disabled, pipe C [ 1.208233] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 1.208235] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: enabled [ 1.208237] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 1.208238] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 1.208240] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:HDMI-A-2] hw state readout: disabled [ 1.208244] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A [ 1.208245] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.208246] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.208248] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.208250] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.208252] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.208253] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.208254] [drm:intel_dump_pipe_config] requested mode: [ 1.208257] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.208258] [drm:intel_dump_pipe_config] adjusted mode: [ 1.208260] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.208262] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.208263] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.208264] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.208266] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.208267] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.208268] [drm:intel_dump_pipe_config] ips: 0 [ 1.208270] [drm:intel_dump_pipe_config] double wide: 0 [ 1.208272] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B [ 1.208273] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.208274] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.208276] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.208277] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.208279] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.208280] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.208281] [drm:intel_dump_pipe_config] requested mode: [ 1.208283] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.208284] [drm:intel_dump_pipe_config] adjusted mode: [ 1.208286] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.208287] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.208289] [drm:intel_dump_pipe_config] port clock: 0 [ 1.208290] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.208291] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.208292] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.208293] [drm:intel_dump_pipe_config] ips: 0 [ 1.208295] [drm:intel_dump_pipe_config] double wide: 0 [ 1.208296] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C [ 1.208297] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.208299] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.208300] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.208302] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.208303] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.208305] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.208306] [drm:intel_dump_pipe_config] requested mode: [ 1.208307] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.208308] [drm:intel_dump_pipe_config] adjusted mode: [ 1.208310] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.208312] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.208313] [drm:intel_dump_pipe_config] port clock: 0 [ 1.208314] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.208316] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.208317] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.208318] [drm:intel_dump_pipe_config] ips: 0 [ 1.208319] [drm:intel_dump_pipe_config] double wide: 0 [ 1.208324] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1] [ 1.208327] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 1.208329] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 1.208330] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 1.208331] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 1.208332] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 1.208334] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 1.208335] [drm:check_crtc_state] [CRTC:20] [ 1.208341] [drm:check_crtc_state] [CRTC:24] [ 1.208343] [drm:check_crtc_state] [CRTC:28] [ 1.208345] [drm:check_shared_dpll_state] WRPLL 1 [ 1.208346] [drm:check_shared_dpll_state] WRPLL 2 [ 1.208351] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.208353] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.208356] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.208360] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880002c9c000 [ 1.208364] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.208365] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.210213] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.210215] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.210217] [drm:i915_gem_context_init] LR context support initialized [ 1.210288] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081d000 [ 1.210403] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.210408] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.210410] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.210413] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.210528] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.210542] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 1.210545] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 1.210549] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] status updated from 3 to 1 [ 1.210559] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.210564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 1.210568] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.210571] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.210573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 1.210575] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 1.210580] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] status updated from 3 to 2 [ 1.210582] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 1.210584] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 1.210586] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 1.210740] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.210742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.210744] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] status updated from 3 to 2 [ 1.210748] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 1.210750] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 1.210753] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 1.210912] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.210914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.210916] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] status updated from 3 to 2 [ 1.210918] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 1.210921] [drm:drm_setup_crtcs] [ 1.210923] [drm:drm_enable_connectors] connector 31 enabled? yes [ 1.210925] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.210927] [drm:drm_enable_connectors] connector 44 enabled? no [ 1.210929] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.210931] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.210934] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.210936] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 1920x1080 [ 1.210938] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.210940] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.210941] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.210944] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 20 (0,0) [ 1.210947] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.210949] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.210954] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.211704] [drm:intelfb_create] allocated 1920x1080 fb: 0x00885000, bo ffff88014406c000 [ 1.211764] fbcon: inteldrmfb (fb0) is primary device [ 1.211827] [drm:intel_fbc_update] disabled per chip default [ 1.211847] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 1.211849] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.211851] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.211854] [drm:drm_mode_debug_printmodeline] Modeline 49:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.211855] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1 [ 1.211858] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 1.211861] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.211863] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 1.211866] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 1.211871] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.211873] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.211875] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.211877] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.211877] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.211878] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.211880] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.211882] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.211883] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.211884] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.211885] [drm:intel_dump_pipe_config] requested mode: [ 1.211888] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.211889] [drm:intel_dump_pipe_config] adjusted mode: [ 1.211891] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.211894] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.211895] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.211896] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.211897] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.211898] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.211899] [drm:intel_dump_pipe_config] ips: 1 [ 1.211900] [drm:intel_dump_pipe_config] double wide: 0 [ 1.211906] [drm:intel_edp_backlight_off] [ 1.212670] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.212805] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.212879] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 1.341132] usb 1-5: new low-speed USB device number 2 using xhci_hcd [ 1.412088] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.422370] [drm:edp_panel_off] Turn eDP port A panel power off [ 1.422373] [drm:wait_panel_off] Wait for panel power off time [ 1.422376] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.482415] [drm:wait_panel_status] Wait complete [ 1.482424] [drm:intel_display_power_put] disabling display [ 1.482425] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.482441] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.482444] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.510461] usb 1-5: New USB device found, idVendor=1c4f, idProduct=0002 [ 1.510462] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.510463] usb 1-5: Product: USB Keyboard [ 1.510464] usb 1-5: Manufacturer: SIGMACHIP [ 1.510532] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.510535] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.513137] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1C4F:0002.0001/input/input6 [ 1.564067] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-5/input0 [ 1.566449] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0002/input/input7 [ 1.617040] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-5/input1 [ 1.688935] tsc: Refined TSC clocksource calibration: 2294.691 MHz [ 1.769894] usb 1-6: new low-speed USB device number 3 using xhci_hcd [ 1.937262] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 1.937263] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.937264] usb 1-6: Product: USB Optical Mouse [ 1.937265] usb 1-6: Manufacturer: Logitech [ 1.937335] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.939222] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0003/input/input8 [ 1.939323] hid-generic 0003:046D:C06A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 2.022751] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 2.042766] [drm:wait_panel_status] Wait complete [ 2.042769] [drm:wait_panel_on] Wait for panel power on [ 2.042772] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.242898] [drm:wait_panel_status] Wait complete [ 2.242904] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.242910] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.243962] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.244550] [drm:intel_dp_start_link_train] clock recovery OK [ 2.245440] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.245671] [drm:intel_edp_backlight_on] [ 2.245672] [drm:intel_panel_enable_backlight] pipe A [ 2.245678] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.245684] [drm:intel_psr_enable] PSR not supported by this panel [ 2.245684] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 2.278971] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1] [ 2.278974] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 2.278975] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 2.278976] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 2.278977] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 2.278977] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 2.278978] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 2.278979] [drm:check_crtc_state] [CRTC:20] [ 2.278985] [drm:check_crtc_state] [CRTC:24] [ 2.278985] [drm:check_crtc_state] [CRTC:28] [ 2.278986] [drm:check_shared_dpll_state] WRPLL 1 [ 2.278987] [drm:check_shared_dpll_state] WRPLL 2 [ 2.278998] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 2.279000] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 2.279003] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279005] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 2.279007] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 2.279008] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 2.279010] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279011] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 2.279014] [drm:drm_fb_helper_hotplug_event] [ 2.279015] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 2.279016] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 2.279023] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.279026] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 2.279028] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.279029] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 2.279030] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 2.279031] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 2.279034] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 2.279035] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 2.279036] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 2.279194] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.279195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.279196] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 2.279196] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 2.279197] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 2.279354] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.279355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.279356] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 2.279358] [drm:drm_setup_crtcs] [ 2.279359] [drm:drm_enable_connectors] connector 31 enabled? yes [ 2.279359] [drm:drm_enable_connectors] connector 40 enabled? no [ 2.279360] [drm:drm_enable_connectors] connector 44 enabled? no [ 2.279360] [drm:drm_enable_connectors] connector 47 enabled? no [ 2.279362] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.279362] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 2.279364] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 1920x1080 [ 2.279364] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.279365] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.279366] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.279367] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 20 (0,0) [ 2.279396] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.279398] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.279399] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279401] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.279403] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.279405] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.279408] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.279409] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.279411] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.279411] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.279412] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.279413] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.279414] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.279415] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.279416] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.279417] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.279418] [drm:intel_dump_pipe_config] requested mode: [ 2.279419] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.279420] [drm:intel_dump_pipe_config] adjusted mode: [ 2.279421] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.279423] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.279423] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.279424] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.279425] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.279426] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.279426] [drm:intel_dump_pipe_config] ips: 1 [ 2.279427] [drm:intel_dump_pipe_config] double wide: 0 [ 2.279428] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 2.279429] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 2.279431] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279432] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 2.279434] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 2.279435] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 2.279436] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279437] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 2.279443] Console: switching to colour frame buffer device 240x67 [ 2.279449] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.279450] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.279451] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.279453] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.279454] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.279455] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.279458] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.279459] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.279460] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.279460] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.279461] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.279462] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.279463] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.279464] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.279465] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.279466] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.279466] [drm:intel_dump_pipe_config] requested mode: [ 2.279468] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.279468] [drm:intel_dump_pipe_config] adjusted mode: [ 2.279469] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.279471] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.279471] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.279472] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.279473] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.279474] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.279474] [drm:intel_dump_pipe_config] ips: 1 [ 2.279475] [drm:intel_dump_pipe_config] double wide: 0 [ 2.285590] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.285616] i915 0000:00:02.0: registered panic notifier [ 2.289075] dracut: Starting plymouth daemon [ 2.295222] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.295225] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.295229] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.295232] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.295234] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.295237] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.295241] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.295242] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.295244] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.295245] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.295245] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.295246] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.295247] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.295248] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.295250] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.295250] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.295251] [drm:intel_dump_pipe_config] requested mode: [ 2.295253] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.295253] [drm:intel_dump_pipe_config] adjusted mode: [ 2.295255] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.295256] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.295257] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.295258] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.295259] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.295260] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.295260] [drm:intel_dump_pipe_config] ips: 1 [ 2.295261] [drm:intel_dump_pipe_config] double wide: 0 [ 2.306123] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.306126] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.306130] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.306133] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.306135] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.306137] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.306142] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.306142] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.306144] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.306145] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.306146] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.306146] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.306148] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.306149] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.306150] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.306151] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.306151] [drm:intel_dump_pipe_config] requested mode: [ 2.306153] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.306154] [drm:intel_dump_pipe_config] adjusted mode: [ 2.306155] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.306157] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.306157] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.306158] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.306159] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.306160] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.306160] [drm:intel_dump_pipe_config] ips: 1 [ 2.306161] [drm:intel_dump_pipe_config] double wide: 0 [ 2.360457] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.360559] ACPI: AC Adapter [ADP1] (on-line) [ 2.375331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.375404] ACPI: Battery Slot [BAT0] (battery present) [ 2.375465] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.375541] ACPI: Battery Slot [BAT1] (battery absent) [ 2.375680] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.375756] ACPI: Battery Slot [BAT2] (battery absent) [ 2.385264] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.385393] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops update_polyphase_filter [i915]) [ 2.386581] [drm:intel_display_power_get] enabling display [ 2.386585] [drm:hsw_set_power_well] Enabling power well [ 2.387856] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.388023] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258) [ 2.388153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.389117] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 2.404741] ppdev: user-space parallel port driver [ 2.406863] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.406867] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.406872] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.406876] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.406879] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.406883] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.406889] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.406891] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.406893] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.406894] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.406895] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.406896] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.406897] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.406898] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.406899] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.406900] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.406901] [drm:intel_dump_pipe_config] requested mode: [ 2.406903] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.406903] [drm:intel_dump_pipe_config] adjusted mode: [ 2.406905] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.406907] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.406907] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.406908] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.406909] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.406910] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.406910] [drm:intel_dump_pipe_config] ips: 1 [ 2.406911] [drm:intel_dump_pipe_config] double wide: 0 [ 2.407224] iTCO_vendor_support: vendor-support=0 [ 2.407362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.407394] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.408265] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 2.408266] EXT4-fs (sda3): write access will be enabled during recovery [ 2.410580] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.419997] EXT4-fs (sda3): recovery complete [ 2.420866] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.442302] dracut: Checking ext4: /dev/sda3 [ 2.444141] dracut: issuing e2fsck -a /dev/sda3 [ 2.454774] dracut: /dev/sda3: clean, 811527/4751360 files, 12335384/19000576 blocks [ 2.456819] dracut: Remounting /dev/sda3 with -o errors=remount-ro,ro [ 2.466458] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.471364] dracut: Mounted root filesystem /dev/sda3 [ 2.484811] device-mapper: uevent: version 1.0.3 [ 2.486656] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 2.506753] dracut: Switching root [ 2.545635] random: init urandom read with 80 bits of entropy available [ 2.567459] init: plymouth-upstart-bridge main process (2795) terminated with status 1 [ 2.570130] init: plymouth-upstart-bridge main process ended, respawning [ 2.577609] init: plymouth-upstart-bridge main process (2805) terminated with status 1 [ 2.579769] init: plymouth-upstart-bridge main process ended, respawning [ 2.701374] Switched to clocksource tsc [ 2.730829] systemd-udevd[2925]: starting version 204 [ 2.742343] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 2.884889] random: nonblocking pool is initialized [ 2.907954] systemd-udevd[2981]: could not open moddep file '/lib/modules/4.0.0-rc6_drm-intel-nightly_a8ae89_20150402+/modules.dep.bin' [ 2.920028] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.920032] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.920037] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.920042] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.920044] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.920048] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.920054] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.920055] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.920058] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.920059] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.920060] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.920061] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.920063] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.920065] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.920067] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.920068] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.920069] [drm:intel_dump_pipe_config] requested mode: [ 2.920072] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.920073] [drm:intel_dump_pipe_config] adjusted mode: [ 2.920075] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.920078] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.920079] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.920080] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.920082] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.920083] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.920084] [drm:intel_dump_pipe_config] ips: 1 [ 2.920085] [drm:intel_dump_pipe_config] double wide: 0 [ 2.929473] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.929477] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.929482] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.929487] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.929489] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.929494] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.929500] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.929501] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.929504] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.929505] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.929506] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.929507] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.929509] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.929511] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.929513] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.929513] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.929514] [drm:intel_dump_pipe_config] requested mode: [ 2.929518] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.929518] [drm:intel_dump_pipe_config] adjusted mode: [ 2.929521] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.929524] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.929525] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.929526] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.929528] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.929529] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.929530] [drm:intel_dump_pipe_config] ips: 1 [ 2.929531] [drm:intel_dump_pipe_config] double wide: 0 [ 2.945619] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.945624] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 2.945629] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.945633] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.945636] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.945640] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.945646] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.945647] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.945650] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.945651] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 2.945652] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.945653] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.945655] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.945657] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.945659] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.945660] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.945661] [drm:intel_dump_pipe_config] requested mode: [ 2.945664] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.945665] [drm:intel_dump_pipe_config] adjusted mode: [ 2.945668] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.945670] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.945671] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.945672] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.945674] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.945675] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.945676] [drm:intel_dump_pipe_config] ips: 1 [ 2.945677] [drm:intel_dump_pipe_config] double wide: 0 [ 2.983191] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k SS [ 3.001373] [drm:i915_gem_open] [ 3.002304] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 3.002309] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 3.002865] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.002871] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.002875] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.002881] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.002884] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.002889] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.002896] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.002898] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.002902] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.002905] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 3.002906] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.002908] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.002911] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.002914] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.002917] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.002918] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.002920] [drm:intel_dump_pipe_config] requested mode: [ 3.002924] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.002926] [drm:intel_dump_pipe_config] adjusted mode: [ 3.002929] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.002933] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.002934] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.002936] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.002939] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.002941] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.002943] [drm:intel_dump_pipe_config] ips: 1 [ 3.002944] [drm:intel_dump_pipe_config] double wide: 0 [ 3.002948] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 3.002951] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 3.002954] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.002958] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.002961] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 3.002964] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 3.002967] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.002970] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.002989] [drm:i915_gem_open] [ 3.003876] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 3.003879] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 3.004410] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.004415] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.004419] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.004425] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.004428] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.004433] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.004439] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.004442] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.004445] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.004447] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 3.004449] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.004451] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.004453] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.004455] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.004458] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.004460] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.004461] [drm:intel_dump_pipe_config] requested mode: [ 3.004466] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.004467] [drm:intel_dump_pipe_config] adjusted mode: [ 3.004471] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.004475] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.004477] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.004479] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.004482] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.004484] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.004486] [drm:intel_dump_pipe_config] ips: 1 [ 3.004488] [drm:intel_dump_pipe_config] double wide: 0 [ 3.004491] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 3.004494] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 3.004498] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.004502] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.004505] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 3.004508] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 3.004511] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.004515] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.004532] [drm:i915_gem_open] [ 3.005467] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 3.005469] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 3.005525] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.005529] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.005539] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 3.005543] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 3.005545] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 3.005559] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.005564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 3.005568] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.005572] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.005576] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 3.006321] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 3.012606] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 3.012611] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 3.012613] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3.012621] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 3.012625] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 3.012627] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 3.012629] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3.012634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 3.012639] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 3.012641] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 3.012643] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3.012812] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.012817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.012820] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 3.012826] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 3.012829] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 3.012831] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3.012988] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.012991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.012994] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 3.013000] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3.013002] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 3.013004] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 3.013605] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.013609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.013612] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 3.013616] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3.013619] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 3.013621] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 3.013795] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.013797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.013862] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 3.013884] [drm:drm_mode_addfb2] [FB:49] [ 3.188737] init: idmapd-mounting (/lib/modules/3.19.0-rc5_drm-intel-next-queued_68b164_20150307+) main process (3778) killed by TERM signal [ 3.245947] init: bluetooth main process (3868) terminated with status 1 [ 3.245960] init: bluetooth main process ended, respawning [ 3.353373] init: bluetooth main process (3957) terminated with status 1 [ 3.353387] init: bluetooth main process ended, respawning [ 3.404079] init: failsafe main process (3919) killed by TERM signal [ 3.451782] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 3.470399] init: bluetooth main process (4054) terminated with status 1 [ 3.470413] init: bluetooth main process ended, respawning [ 3.508991] init: statd-mounting (/lib/modules/3.19.0-rc5_drm-intel-next-queued_68b164_20150307+) main process (3779) killed by TERM signal [ 3.540973] init: bluetooth main process (4142) terminated with status 1 [ 3.540987] init: bluetooth main process ended, respawning [ 3.655939] init: bluetooth main process (4210) terminated with status 1 [ 3.655951] init: bluetooth main process ended, respawning [ 3.841546] init: bluetooth main process (4383) terminated with status 1 [ 3.841556] init: bluetooth main process ended, respawning [ 3.869881] init: bluetooth main process (4420) terminated with status 1 [ 3.869891] init: bluetooth main process ended, respawning [ 3.927709] init: bluetooth main process (4468) terminated with status 1 [ 3.927723] init: bluetooth main process ended, respawning [ 3.931606] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.931614] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.931618] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.931624] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.931627] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.931632] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.931639] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.931641] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.931644] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.931646] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 3.931648] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.931650] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.931652] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.931655] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.931657] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.931659] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.931661] [drm:intel_dump_pipe_config] requested mode: [ 3.931665] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.931674] [drm:intel_dump_pipe_config] adjusted mode: [ 3.931678] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.931686] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.931691] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.931696] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.931701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.931706] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.931709] [drm:intel_dump_pipe_config] ips: 1 [ 3.931710] [drm:intel_dump_pipe_config] double wide: 0 [ 3.931713] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 3.931716] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 3.931718] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.931721] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.931723] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 3.931725] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 3.931727] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.931729] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.931762] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.931764] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.931765] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.931767] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.931769] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.931770] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.931774] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.931775] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.931776] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.931777] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 3.931777] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.931778] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.931779] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.931780] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.931781] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.931782] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.931782] [drm:intel_dump_pipe_config] requested mode: [ 3.931784] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.931784] [drm:intel_dump_pipe_config] adjusted mode: [ 3.931786] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.931787] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.931788] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.931789] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.931790] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.931790] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.931791] [drm:intel_dump_pipe_config] ips: 1 [ 3.931791] [drm:intel_dump_pipe_config] double wide: 0 [ 3.938863] init: plymouth-upstart-bridge main process ended, respawning [ 3.954805] init: bluetooth main process (4492) terminated with status 1 [ 3.954819] init: bluetooth main process ended, respawning [ 3.976723] init: bluetooth main process (4519) terminated with status 1 [ 3.976738] init: bluetooth main process ended, respawning [ 3.994157] init: bluetooth main process (4543) terminated with status 1 [ 3.994170] init: bluetooth respawning too fast, stopped [ 5.246947] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 5.246956] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 6.604908] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 19.102922] pm_rps: executing [ 19.103000] [drm:i915_gem_open] [ 19.103587] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 19.103589] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 19.104034] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 19.104038] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 19.104041] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 19.104045] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 19.104048] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 19.104052] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 19.104057] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 19.104058] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 19.104060] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 19.104062] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 19.104063] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 19.104064] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 19.104066] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 19.104068] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 19.104070] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 19.104071] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 19.104072] [drm:intel_dump_pipe_config] requested mode: [ 19.104075] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.104076] [drm:intel_dump_pipe_config] adjusted mode: [ 19.104078] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.104080] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 19.104082] [drm:intel_dump_pipe_config] port clock: 270000 [ 19.104083] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 19.104085] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 19.104086] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 19.104087] [drm:intel_dump_pipe_config] ips: 1 [ 19.104088] [drm:intel_dump_pipe_config] double wide: 0 [ 19.104091] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 19.104093] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 19.104095] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 19.104098] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 19.104100] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 19.104102] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 19.104103] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 19.104105] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 19.104116] [drm:i915_gem_open] [ 19.104620] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 19.104622] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 19.105013] [drm:i915_gem_open] [ 19.105551] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 19.105553] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 19.105736] pm_rps: starting subtest reset [ 39.101559] [drm:i915_ring_stop_set] Stopping rings 0x400000ff [ 44.713090] [drm] stuck on render ring [ 44.714323] [drm] GPU HANG: ecode 8:0:0xfffffffe, in pm_rps [4843], reason: Ring hung, action: reset [ 44.714325] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 44.714326] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 44.714327] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 44.714328] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 44.714329] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 44.714349] [drm:i915_reset_and_wakeup] resetting chip [ 44.716742] [drm] Simulated gpu hang, resetting stop_rings [ 44.716745] drm/i915: Resetting chip after gpu hang [ 44.716773] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 44.716778] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 44.716780] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 44.716783] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 44.803999] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 44.830092] pm_rps: exiting, ret=99 [ 44.989956] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 44.989962] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 44.989966] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 44.989971] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 44.989974] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 44.989978] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 44.989983] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 44.989985] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 44.989987] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 44.989989] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 44.989990] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 44.989991] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 44.989993] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 44.989995] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 44.989997] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 44.989998] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 44.989999] [drm:intel_dump_pipe_config] requested mode: [ 44.990002] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 44.990003] [drm:intel_dump_pipe_config] adjusted mode: [ 44.990006] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 44.990008] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 44.990009] [drm:intel_dump_pipe_config] port clock: 270000 [ 44.990010] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 44.990012] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 44.990013] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 44.990015] [drm:intel_dump_pipe_config] ips: 1 [ 44.990016] [drm:intel_dump_pipe_config] double wide: 0 [ 44.990019] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 44.990021] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 44.990024] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 44.990026] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 44.990030] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 44.990032] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 44.990034] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 44.990036] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 63.690682] usb 1-6: USB disconnect, device number 3 [ 65.203698] usb 1-6: new low-speed USB device number 4 using xhci_hcd [ 65.370989] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 65.370992] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 65.370993] usb 1-6: Product: USB Optical Mouse [ 65.370995] usb 1-6: Manufacturer: Logitech [ 65.371075] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 65.372961] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0004/input/input10 [ 65.373072] hid-generic 0003:046D:C06A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 125.456334] usb 1-6: USB disconnect, device number 4 [ 126.969429] usb 1-6: new low-speed USB device number 5 using xhci_hcd [ 127.136646] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 127.136648] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.136650] usb 1-6: Product: USB Optical Mouse [ 127.136651] usb 1-6: Manufacturer: Logitech [ 127.136726] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 127.138629] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0005/input/input11 [ 127.189375] hid-generic 0003:046D:C06A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 187.221997] usb 1-6: USB disconnect, device number 5 [ 188.735161] usb 1-6: new low-speed USB device number 6 using xhci_hcd [ 188.902487] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 188.902490] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 188.902492] usb 1-6: Product: USB Optical Mouse [ 188.902493] usb 1-6: Manufacturer: Logitech [ 188.902570] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 188.904614] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0006/input/input12 [ 188.955101] hid-generic 0003:046D:C06A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 248.987645] usb 1-6: USB disconnect, device number 6 [ 250.500894] usb 1-6: new low-speed USB device number 7 using xhci_hcd [ 250.668144] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 250.668147] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 250.668149] usb 1-6: Product: USB Optical Mouse [ 250.668150] usb 1-6: Manufacturer: Logitech [ 250.668225] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 250.670279] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0007/input/input13 [ 250.720832] hid-generic 0003:046D:C06A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 310.753301] usb 1-6: USB disconnect, device number 7 [ 312.266628] usb 1-6: new low-speed USB device number 8 using xhci_hcd [ 312.433802] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 312.433805] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 312.433807] usb 1-6: Product: USB Optical Mouse [ 312.433808] usb 1-6: Manufacturer: Logitech [ 312.433886] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 312.435931] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0008/input/input14 [ 312.486573] hid-generic 0003:046D:C06A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0