Attachment 59708 Details for Bug 48170 – dmesg after applying "59683: properly compute dp dithering v3"

dmesg after applying "59683: properly compute dp dithering v3"

dmesg (text/plain), 91.35 KB, created by Brice Goglin on 2012-04-10 00:20:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brice Goglin

Created: 2012-04-10 00:20:57 UTC

Size: 91.35 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.3.0-trunk-amd64 (Debian 3.3-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Thu Mar 22 18:02:10 UTC 2012
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-trunk-amd64 root=UUID=50b3f739-28de-4fee-bb5c-6e8b4c520325 ro quiet drm.debug=0xe
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
>[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000db65f000 (usable)
>[    0.000000]  BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>[    0.000000]  BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.6 present.
>[    0.000000] DMI: Dell Inc. Latitude E6410/ , BIOS A09 05/26/2011
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] No AGP bridge found
>[    0.000000] last_pfn = 0x11c000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
>[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
>[    0.000000]   4 base 100000000 mask FE0000000 write-back
>[    0.000000]   5 base 11C000000 mask FFC000000 uncachable
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
>[    0.000000] last_pfn = 0xdb65f max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [ffff8800000f2260] f2260
>[    0.000000] initial memory mapped : 0 - 20000000
>[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
>[    0.000000] init_memory_mapping: 0000000000000000-00000000db65f000
>[    0.000000]  0000000000 - 00db600000 page 2M
>[    0.000000]  00db600000 - 00db65f000 page 4k
>[    0.000000] kernel direct mapping tables up to db65f000 @ 1fffa000-20000000
>[    0.000000] init_memory_mapping: 0000000100000000-000000011c000000
>[    0.000000]  0100000000 - 011c000000 page 2M
>[    0.000000] kernel direct mapping tables up to 11c000000 @ db659000-db65f000
>[    0.000000] RAMDISK: 36a1e000 - 37507000
>[    0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 00000000db67de18 00064 (v01 DELL    E2      06222004 MSFT 00010013)
>[    0.000000] ACPI: FACP 00000000db75fc18 000F4 (v04 DELL    E2      06222004 MSFT 00010013)
>[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120111/tbfadt-382)
>[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20120111/tbfadt-502)
>[    0.000000] ACPI: DSDT 00000000db73e018 0A255 (v01 DELL    E2      00001001 INTL 20080729)
>[    0.000000] ACPI: FACS 00000000db76bf40 00040
>[    0.000000] ACPI: APIC 00000000db67cf18 0008C (v02 DELL    E2      06222004 MSFT 00010013)
>[    0.000000] ACPI: TCPA 00000000db76dd18 00032 (v02                 00000000      00000000)
>[    0.000000] ACPI: MCFG 00000000db76dc98 0003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
>[    0.000000] ACPI: HPET 00000000db76dc18 00038 (v01 DELL    E2      00000001 ASL  00000061)
>[    0.000000] ACPI: BOOT 00000000db76db98 00028 (v01 DELL   E2       06222004 AMI  00010013)
>[    0.000000] ACPI: SLIC 00000000db766818 00176 (v03 DELL    E2      06222004 MSFT 00010013)
>[    0.000000] ACPI: SSDT 00000000db74d018 009F1 (v01  PmRef    CpuPm 00003000 INTL 20080729)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-000000011c000000
>[    0.000000] Initmem setup node 0 0000000000000000-000000011c000000
>[    0.000000]   NODE_DATA [000000011bffb000 - 000000011bffffff]
>[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117600000-ffff88011affffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x0011c000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] Early memory PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009a
>[    0.000000]     0: 0x00000100 -> 0x000db65f
>[    0.000000]     0: 0x00100000 -> 0x0011c000
>[    0.000000] On node 0 totalpages: 1013225
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 5 pages reserved
>[    0.000000]   DMA zone: 3917 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14280 pages used for memmap
>[    0.000000]   DMA32 zone: 880279 pages, LIFO batch:31
>[    0.000000]   Normal zone: 1568 pages used for memmap
>[    0.000000]   Normal zone: 113120 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
>[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000
>[    0.000000] PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000
>[    0.000000] PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000
>[    0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000
>[    0.000000] PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000
>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
>[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
>[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
>[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
>[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
>[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
>[    0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
>[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011bc00000 s82048 r8192 d24448 u262144
>[    0.000000] pcpu-alloc: s82048 r8192 d24448 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997316
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-trunk-amd64 root=UUID=50b3f739-28de-4fee-bb5c-6e8b4c520325 ro quiet drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3906884k/4653056k available (3435k kernel code, 600156k absent, 146016k reserved, 3236k data, 564k init)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] NR_IRQS:33024 nr_irqs:744 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] Fast TSC calibration using PIT
>[    0.004000] Detected 2660.183 MHz processor.
>[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.36 BogoMIPS (lpj=10640732)
>[    0.000006] pid_max: default: 32768 minimum: 301
>[    0.000041] Security Framework initialized
>[    0.000045] AppArmor: AppArmor disabled by boot time parameter
>[    0.000288] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.001196] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.001616] Mount-cache hash table entries: 256
>[    0.001722] Initializing cgroup subsys cpuacct
>[    0.001724] Initializing cgroup subsys memory
>[    0.001734] Initializing cgroup subsys devices
>[    0.001737] Initializing cgroup subsys freezer
>[    0.001738] Initializing cgroup subsys net_cls
>[    0.001740] Initializing cgroup subsys blkio
>[    0.001745] Initializing cgroup subsys perf_event
>[    0.001770] CPU: Physical Processor ID: 0
>[    0.001771] CPU: Processor Core ID: 0
>[    0.001776] mce: CPU supports 9 MCE banks
>[    0.001784] CPU0: Thermal monitoring handled by SMI
>[    0.001791] using mwait in idle threads.
>[    0.002107] ACPI: Core revision 20120111
>[    0.008106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.047693] CPU0: Intel(R) Core(TM) i7 CPU       M 620  @ 2.67GHz stepping 02
>[    0.154963] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
>[    0.154968] CPUID marked event: 'bus cycles' unavailable
>[    0.154971] ... version:                3
>[    0.154972] ... bit width:              48
>[    0.154972] ... generic registers:      4
>[    0.154974] ... value mask:             0000ffffffffffff
>[    0.154975] ... max period:             000000007fffffff
>[    0.154976] ... fixed-purpose events:   3
>[    0.154977] ... event mask:             000000070000000f
>[    0.155196] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.155297] Booting Node   0, Processors  #1
>[    0.155299] smpboot cpu 1: start_ip = 95000
>[    0.166319] CPU1: Thermal monitoring handled by SMI
>[    0.186396] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.186504]  #2
>[    0.186505] smpboot cpu 2: start_ip = 95000
>[    0.197526] CPU2: Thermal monitoring handled by SMI
>[    0.217593] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.217708]  #3
>[    0.217709] smpboot cpu 3: start_ip = 95000
>[    0.228728] CPU3: Thermal monitoring handled by SMI
>[    0.248793] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.248830] Brought up 4 CPUs
>[    0.248832] Total of 4 processors activated (21281.46 BogoMIPS).
>[    0.251350] devtmpfs: initialized
>[    0.254793] PM: Registering ACPI NVS region at db67f000 (983040 bytes)
>[    0.254946] print_constraints: dummy: 
>[    0.255000] NET: Registered protocol family 16
>[    0.255090] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.255092] ACPI: bus type pci registered
>[    0.255158] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.255161] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.258964] PCI: Using configuration type 1 for base access
>[    0.258970] dmi type 0xB1 record - unknown flag
>[    0.259516] bio: create slab <bio-0> at 0
>[    0.259600] ACPI: Added _OSI(Module Device)
>[    0.259602] ACPI: Added _OSI(Processor Device)
>[    0.259604] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.259605] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.260740] ACPI: EC: Look up EC in DSDT
>[    0.266587] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.276752] ACPI: SSDT 00000000db7eaa18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
>[    0.277027] ACPI: Dynamic OEM Table Load:
>[    0.277029] ACPI: SSDT           (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
>[    0.277175] ACPI: SSDT 00000000db7e8018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
>[    0.277427] ACPI: Dynamic OEM Table Load:
>[    0.277429] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
>[    0.277712] ACPI: SSDT 00000000db7e9a98 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
>[    0.278044] ACPI: Dynamic OEM Table Load:
>[    0.278046] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
>[    0.278169] ACPI: SSDT 00000000db7e7d98 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
>[    0.278455] ACPI: Dynamic OEM Table Load:
>[    0.278457] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
>[    0.280275] ACPI: Interpreter enabled
>[    0.280279] ACPI: (supports S0 S3 S4 S5)
>[    0.280300] ACPI: Using IOAPIC for interrupt routing
>[    0.296244] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
>[    0.296868] ACPI: No dock devices found.
>[    0.296872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.297257] \_SB_.PCI0:_OSC invalid UUID
>[    0.297258] _OSC request data:1 8 1f 
>[    0.297261] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.297870] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>[    0.297872] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>[    0.297873] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>[    0.297876] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
>[    0.297907] PCI host bridge to bus 0000:00
>[    0.297908] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.297910] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.297911] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.297913] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
>[    0.297921] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
>[    0.297935] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
>[    0.297954] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
>[    0.297963] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
>[    0.297968] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.297972] pci 0000:00:02.0: reg 20: [io  0x60b0-0x60b7]
>[    0.298037] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
>[    0.298062] pci 0000:00:19.0: reg 10: [mem 0xf5500000-0xf551ffff]
>[    0.298073] pci 0000:00:19.0: reg 14: [mem 0xf5580000-0xf5580fff]
>[    0.298084] pci 0000:00:19.0: reg 18: [io  0x6040-0x605f]
>[    0.298174] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.298206] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
>[    0.298230] pci 0000:00:1a.0: reg 10: [mem 0xf5570000-0xf55703ff]
>[    0.298335] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.298368] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
>[    0.298388] pci 0000:00:1b.0: reg 10: [mem 0xf5560000-0xf5563fff 64bit]
>[    0.298483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.298513] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
>[    0.298612] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.298642] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
>[    0.298740] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.298771] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
>[    0.298870] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.298911] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
>[    0.298935] pci 0000:00:1d.0: reg 10: [mem 0xf5550000-0xf55503ff]
>[    0.299041] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.299067] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>[    0.299151] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
>[    0.299277] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
>[    0.299303] pci 0000:00:1f.2: reg 10: [io  0x6090-0x6097]
>[    0.299313] pci 0000:00:1f.2: reg 14: [io  0x6080-0x6083]
>[    0.299324] pci 0000:00:1f.2: reg 18: [io  0x6070-0x6077]
>[    0.299334] pci 0000:00:1f.2: reg 1c: [io  0x6060-0x6063]
>[    0.299345] pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
>[    0.299355] pci 0000:00:1f.2: reg 24: [mem 0xf5540000-0xf55407ff]
>[    0.299420] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.299448] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
>[    0.299468] pci 0000:00:1f.3: reg 10: [mem 0xf5530000-0xf55300ff 64bit]
>[    0.299497] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
>[    0.299545] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
>[    0.299571] pci 0000:00:1f.6: reg 10: [mem 0xf5520000-0xf5520fff 64bit]
>[    0.299721] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>[    0.299726] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.299730] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf54fffff]
>[    0.299822] pci 0000:02:00.0: [8086:422b] type 0 class 0x000280
>[    0.299860] pci 0000:02:00.0: reg 10: [mem 0xf2d00000-0xf2d01fff 64bit]
>[    0.300045] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.310094] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>[    0.310102] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.310109] pci 0000:00:1c.1:   bridge window [mem 0xf2d00000-0xf40fffff]
>[    0.310257] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
>[    0.310279] pci 0000:03:00.0: reg 10: [mem 0xf2c40000-0xf2c400ff]
>[    0.310437] pci 0000:03:00.0: supports D1 D2
>[    0.310439] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.310498] pci 0000:03:00.4: [1180:e832] type 0 class 0x000c00
>[    0.310520] pci 0000:03:00.4: reg 10: [mem 0xf2c00000-0xf2c007ff]
>[    0.310680] pci 0000:03:00.4: supports D1 D2
>[    0.310682] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.322111] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
>[    0.322119] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
>[    0.322126] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
>[    0.322209] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>[    0.322221] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.322223] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.322225] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.322227] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
>[    0.322253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.322442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>[    0.322564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.322619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.322673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>[    0.322796] \_SB_.PCI0:_OSC invalid UUID
>[    0.322797] _OSC request data:1 1f 1f 
>[    0.322801]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.322835] \_SB_.PCI0:_OSC invalid UUID
>[    0.322836] _OSC request data:1 0 1d 
>[    0.322839]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
>[    0.322840] ACPI _OSC control for PCIe not granted, disabling ASPM
>[    0.326449] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
>[    0.326485] PCI: root bus 3f: using default resources
>[    0.326511] PCI host bridge to bus 0000:3f
>[    0.326513] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
>[    0.326515] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
>[    0.326520] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
>[    0.326535] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
>[    0.326551] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
>[    0.326565] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
>[    0.326579] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
>[    0.326592] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
>[    0.326617]  pci0000:3f: Requesting ACPI _OSC control (0x1d)
>[    0.326620]  pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>[    0.326621] ACPI _OSC control for PCIe not granted, disabling ASPM
>[    0.326834] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.326878] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.326922] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>[    0.326965] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.327008] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>[    0.327050] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.327094] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.327137] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.327217] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.327225] vgaarb: loaded
>[    0.327226] vgaarb: bridge control possible 0000:00:02.0
>[    0.327253] PCI: Using ACPI for IRQ routing
>[    0.329586] PCI: pci_cache_line_size set to 64 bytes
>[    0.329752] reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
>[    0.329753] reserve RAM buffer: 00000000db65f000 - 00000000dbffffff 
>[    0.329858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.329862] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.331879] Switching to clocksource hpet
>[    0.333559] pnp: PnP ACPI init
>[    0.333573] ACPI: bus type pnp registered
>[    0.333908] pnp 00:00: [bus 00-3e]
>[    0.333911] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.333913] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.333915] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.333917] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.333918] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.333920] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.333921] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.333923] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.333924] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.333926] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.333928] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.333929] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.333931] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.333932] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.333934] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.333935] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.333937] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.333939] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
>[    0.333940] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>[    0.333981] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.334014] pnp 00:01: [io  0x0000-0x001f]
>[    0.334016] pnp 00:01: [io  0x0081-0x0091]
>[    0.334018] pnp 00:01: [io  0x0093-0x009f]
>[    0.334019] pnp 00:01: [io  0x00c0-0x00df]
>[    0.334021] pnp 00:01: [dma 4]
>[    0.334042] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.334049] pnp 00:02: [mem 0xff000000-0xffffffff]
>[    0.334068] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.334138] pnp 00:03: [mem 0xfed00000-0xfed003ff]
>[    0.334160] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.334169] pnp 00:04: [io  0x00f0]
>[    0.334177] pnp 00:04: [irq 13]
>[    0.334196] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.334206] pnp 00:05: [io  0x002e-0x002f]
>[    0.334207] pnp 00:05: [io  0x004e-0x004f]
>[    0.334209] pnp 00:05: [io  0x0061]
>[    0.334211] pnp 00:05: [io  0x0063]
>[    0.334212] pnp 00:05: [io  0x0065]
>[    0.334214] pnp 00:05: [io  0x0067]
>[    0.334215] pnp 00:05: [io  0x0070]
>[    0.334216] pnp 00:05: [io  0x0080]
>[    0.334217] pnp 00:05: [io  0x0092]
>[    0.334219] pnp 00:05: [io  0x00b2-0x00b3]
>[    0.334220] pnp 00:05: [io  0x0680-0x069f]
>[    0.334222] pnp 00:05: [io  0x1000-0x1003]
>[    0.334223] pnp 00:05: [io  0x1004-0x1013]
>[    0.334224] pnp 00:05: [io  0xffff]
>[    0.334226] pnp 00:05: [io  0x0400-0x047f]
>[    0.334227] pnp 00:05: [io  0x0500-0x057f]
>[    0.334228] pnp 00:05: [io  0x164e-0x164f]
>[    0.334267] system 00:05: [io  0x0680-0x069f] has been reserved
>[    0.334270] system 00:05: [io  0x1000-0x1003] has been reserved
>[    0.334272] system 00:05: [io  0x1004-0x1013] has been reserved
>[    0.334274] system 00:05: [io  0xffff] has been reserved
>[    0.334276] system 00:05: [io  0x0400-0x047f] has been reserved
>[    0.334278] system 00:05: [io  0x0500-0x057f] has been reserved
>[    0.334280] system 00:05: [io  0x164e-0x164f] has been reserved
>[    0.334283] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.334290] pnp 00:06: [io  0x0070-0x0077]
>[    0.334295] pnp 00:06: [irq 8]
>[    0.334316] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.334325] pnp 00:07: [io  0x0060]
>[    0.334327] pnp 00:07: [io  0x0064]
>[    0.334332] pnp 00:07: [irq 1]
>[    0.334352] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.336096] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
>[    0.336109] pnp 00:09: [irq 12]
>[    0.336131] pnp 00:09: Plug and Play ACPI device, IDs DLL040a PNP0f13 (active)
>[    0.336358] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
>[    0.336361] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
>[    0.336363] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
>[    0.336364] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
>[    0.336366] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
>[    0.336368] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>[    0.336369] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
>[    0.336371] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>[    0.336372] pnp 00:0a: [mem 0xff000000-0xffffffff]
>[    0.336374] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
>[    0.336375] pnp 00:0a: [mem 0xf55c0000-0xf55c0fff]
>[    0.336421] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.336423] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.336425] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.336427] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.336430] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.336432] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.336434] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.336436] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.336439] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.336441] system 00:0a: [mem 0xf55c0000-0xf55c0fff] has been reserved
>[    0.336443] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.336510] pnp 00:0b: [irq 23]
>[    0.336540] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
>[    0.337837] pnp 00:0c: [bus 3f]
>[    0.337874] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
>[    0.339151] pnp: PnP ACPI: found 13 devices
>[    0.339153] ACPI: ACPI bus type pnp unregistered
>[    0.345700] PCI: max bus depth: 1 pci_try_num: 2
>[    0.345742] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf5600000-0xf57fffff 64bit pref]
>[    0.345745] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf5800000-0xf59fffff 64bit pref]
>[    0.345748] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5a00000-0xf5bfffff 64bit pref]
>[    0.345750] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>[    0.345753] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.345759] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf54fffff]
>[    0.345763] pci 0000:00:1c.0:   bridge window [mem 0xf5a00000-0xf5bfffff 64bit pref]
>[    0.345770] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>[    0.345774] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.345779] pci 0000:00:1c.1:   bridge window [mem 0xf2d00000-0xf40fffff]
>[    0.345784] pci 0000:00:1c.1:   bridge window [mem 0xf5800000-0xf59fffff 64bit pref]
>[    0.345791] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
>[    0.345794] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
>[    0.345800] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
>[    0.345804] pci 0000:00:1c.2:   bridge window [mem 0xf5600000-0xf57fffff 64bit pref]
>[    0.345811] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>[    0.345857] pci 0000:00:1e.0: setting latency timer to 64
>[    0.345860] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.345862] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.345864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.345865] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
>[    0.345867] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
>[    0.345868] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf54fffff]
>[    0.345870] pci_bus 0000:01: resource 2 [mem 0xf5a00000-0xf5bfffff 64bit pref]
>[    0.345872] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    0.345873] pci_bus 0000:02: resource 1 [mem 0xf2d00000-0xf40fffff]
>[    0.345875] pci_bus 0000:02: resource 2 [mem 0xf5800000-0xf59fffff 64bit pref]
>[    0.345877] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
>[    0.345878] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
>[    0.345880] pci_bus 0000:03: resource 2 [mem 0xf5600000-0xf57fffff 64bit pref]
>[    0.345881] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
>[    0.345883] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
>[    0.345884] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.345886] pci_bus 0000:05: resource 7 [mem 0xe0000000-0xfeafffff]
>[    0.345888] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
>[    0.345889] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
>[    0.345968] NET: Registered protocol family 2
>[    0.346087] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.346903] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.349016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.349265] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.349267] TCP reno registered
>[    0.349279] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.349306] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.349448] NET: Registered protocol family 1
>[    0.349463] pci 0000:00:02.0: Boot video device
>[    0.349638] PCI: CLS 64 bytes, default 64
>[    0.349682] Unpacking initramfs...
>[    0.536111] Freeing initrd memory: 11172k freed
>[    0.538356] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.538361] Placing 64MB software IO TLB between ffff8800d7659000 - ffff8800db659000
>[    0.538363] software IO TLB at phys 0xd7659000 - 0xdb659000
>[    0.538384] Simple Boot Flag at 0xf1 set to 0x1
>[    0.538942] audit: initializing netlink socket (disabled)
>[    0.538957] type=2000 audit(1334042136.376:1): initialized
>[    0.550796] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.551676] VFS: Disk quotas dquot_6.5.2
>[    0.551709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.551788] msgmni has been set to 7652
>[    0.552002] alg: No test for stdrng (krng)
>[    0.552044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.552049] io scheduler noop registered
>[    0.552050] io scheduler deadline registered
>[    0.552086] io scheduler cfq registered (default)
>[    0.552344] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.552361] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.552363] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.552690] intel_idle: MWAIT substates: 0x1120
>[    0.552692] intel_idle: v0.4 model 0x25
>[    0.552693] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.552748] GHES: HEST is not enabled!
>[    0.552811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.553328] Linux agpgart interface v0.103
>[    0.553385] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>[    0.553445] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    0.554213] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
>[    0.554371] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>[    0.554487] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.554706] i8042: Warning: Keylock active
>[    0.556076] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.556082] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.556213] mousedev: PS/2 mouse device common for all mice
>[    0.556258] rtc_cmos 00:06: RTC can wake from S4
>[    0.556415] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>[    0.556446] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>[    0.556533] cpuidle: using governor ladder
>[    0.556606] cpuidle: using governor menu
>[    0.556795] TCP cubic registered
>[    0.556950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    0.557164] NET: Registered protocol family 10
>[    0.557663] Mobile IPv6
>[    0.557665] NET: Registered protocol family 17
>[    0.557668] Registering the dns_resolver key type
>[    0.557869] PM: Hibernation image not present or could not be loaded.
>[    0.557895] registered taskstats version 1
>[    0.558663] rtc_cmos 00:06: setting system clock to 2012-04-10 07:15:36 UTC (1334042136)
>[    0.558716] Initializing network drop monitor service
>[    0.559707] Freeing unused kernel memory: 564k freed
>[    0.559779] Write protecting the kernel read-only data: 6144k
>[    0.561711] Freeing unused kernel memory: 644k freed
>[    0.563893] Freeing unused kernel memory: 640k freed
>[    0.685808] udevd[60]: starting version 175
>[    0.721195] SCSI subsystem initialized
>[    0.723390] usbcore: registered new interface driver usbfs
>[    0.723416] usbcore: registered new interface driver hub
>[    0.724044] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
>[    0.724046] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>[    0.724101] e1000e 0000:00:19.0: setting latency timer to 64
>[    0.724219] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
>[    0.729107] libata version 3.00 loaded.
>[    0.730466] sdhci: Secure Digital Host Controller Interface driver
>[    0.730469] sdhci: Copyright(c) Pierre Ossman
>[    0.731568] usbcore: registered new device driver usb
>[    0.731935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.790924] firewire_ohci: Added fw-ohci device 0000:03:00.4, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x11
>[    0.790994] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3)
>[    0.791138] mmc0: no vmmc regulator found
>[    0.791319] Registered led device: mmc0::
>[    0.792372] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
>[    0.963359] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:53:da:8c
>[    0.963365] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>[    0.963422] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 3041FF-0FF
>[    0.963530] ahci 0000:00:1f.2: version 3.0
>[    0.963645] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>[    0.963750] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
>[    0.963755] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
>[    0.963762] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.970932] scsi0 : ahci
>[    0.971169] scsi1 : ahci
>[    0.971350] scsi2 : ahci
>[    0.971527] scsi3 : ahci
>[    0.971701] scsi4 : ahci
>[    0.971884] scsi5 : ahci
>[    0.972374] ata1: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540100 irq 41
>[    0.972377] ata2: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540180 irq 41
>[    0.972379] ata3: DUMMY
>[    0.972380] ata4: DUMMY
>[    0.972380] ata5: DUMMY
>[    0.972381] ata6: DUMMY
>[    0.972440] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[    0.972450] ehci_hcd 0000:00:1a.0: EHCI Host Controller
>[    0.972500] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.972565] ehci_hcd 0000:00:1a.0: debug port 2
>[    0.976467] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>[    0.976473] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5570000
>[    0.986280] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.986348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.986354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.986358] usb usb1: Product: EHCI Host Controller
>[    0.986362] usb usb1: Manufacturer: Linux 3.3.0-trunk-amd64 ehci_hcd
>[    0.986366] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.986620] hub 1-0:1.0: USB hub found
>[    0.986626] hub 1-0:1.0: 2 ports detected
>[    0.986698] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[    0.986702] ehci_hcd 0000:00:1d.0: EHCI Host Controller
>[    0.986707] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.986732] ehci_hcd 0000:00:1d.0: debug port 2
>[    0.990631] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>[    0.990646] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5550000
>[    1.004367] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.004401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.004407] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.004411] usb usb2: Product: EHCI Host Controller
>[    1.004414] usb usb2: Manufacturer: Linux 3.3.0-trunk-amd64 ehci_hcd
>[    1.004418] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.004662] hub 2-0:1.0: USB hub found
>[    1.004666] hub 2-0:1.0: 2 ports detected
>[    1.289599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.289638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.289682] firewire_core: created device fw0: GUID 00248a61364fc000, S400
>[    1.290691] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.291940] ata1.00: ATA-7: SAMSUNG SSD PM800 2.5" 256GB, VBM24D1Q, max UDMA/100
>[    1.291946] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.292503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.293664] ata1.00: configured for UDMA/100
>[    1.293722] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133
>[    1.293951] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM80 VBM2 PQ: 0 ANSI: 5
>[    1.297516] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    1.298626] ata2.00: configured for UDMA/133
>[    1.304153] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU10N    A102 PQ: 0 ANSI: 5
>[    1.309199] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>[    1.309272] sd 0:0:0:0: [sda] Write Protect is off
>[    1.309274] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.309286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.310957]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>[    1.311891] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.313607] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.313612] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.313825] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.429845] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>[    1.429851] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.430262] hub 1-1:1.0: USB hub found
>[    1.430437] hub 1-1:1.0: 6 ports detected
>[    1.491352] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    1.532895] Refined TSC clocksource calibration: 2659.982 MHz.
>[    1.532903] Switching to clocksource tsc
>[    1.540889] usb 2-1: new high-speed USB device number 2 using ehci_hcd
>[    1.672940] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>[    1.672947] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.673383] hub 2-1:1.0: USB hub found
>[    1.673546] hub 2-1:1.0: 8 ports detected
>[    1.744546] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
>[    1.836803] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513
>[    1.836809] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.837319] hub 1-1.1:1.0: USB hub found
>[    1.837601] hub 1-1.1:1.0: 3 ports detected
>[    1.908150] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
>[    1.929765] udevd[330]: starting version 175
>[    2.000333] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513
>[    2.000339] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.000662] hub 1-1.2:1.0: USB hub found
>[    2.000914] hub 1-1.2:1.0: 3 ports detected
>[    2.071693] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
>[    2.071835] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    2.072281] ACPI: Lid Switch [LID]
>[    2.072334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[    2.072340] ACPI: Power Button [PBTN]
>[    2.072391] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    2.072394] ACPI: Sleep Button [SBTN]
>[    2.072445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    2.072448] ACPI: Power Button [PWRF]
>[    2.088931] ACPI: Battery Slot [BAT0] (battery present)
>[    2.099855] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
>[    2.099909] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
>[    2.100817] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
>[    2.104572] iTCO_vendor_support: vendor-support=0
>[    2.118598] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    2.149423] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.149685] wmi: Mapper loaded
>[    2.151629] ACPI: AC Adapter [AC] (on-line)
>[    2.153541] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
>[    2.153638] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
>[    2.153713] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.167987] [drm] Initialized drm 1.1.0 20060810
>[    2.170574] cfg80211: Calling CRDA to update world regulatory domain
>[    2.171817] ACPI Warning: 0x0000000000006000-0x000000000000601f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
>[    2.171826] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.173313] usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814
>[    2.173316] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.173319] usb 1-1.4: Product: Laptop_Integrated_Webcam_3M
>[    2.173321] usb 1-1.4: Manufacturer: CN06YWTK7248702O01B8
>[    2.173830] input: Dell WMI hotkeys as /devices/virtual/input/input5
>[    2.197412] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>[    2.197418] Copyright(c) 2003-2011 Intel Corporation
>[    2.197532] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
>[    2.197534] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000668000
>[    2.197537] iwlwifi 0000:02:00.0: HW Revision ID = 0x35
>[    2.197614] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
>[    2.197660] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
>[    2.197661] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>[    2.197663] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[    2.197665] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>[    2.197666] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
>[    2.197672] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
>[    2.197738] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
>[    2.214094] iwlwifi 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
>[    2.214100] iwlwifi 0000:02:00.0: Device SKU: 0x1F0
>[    2.214104] iwlwifi 0000:02:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
>[    2.214176] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>[    2.249957] usb 2-1.7: new full-speed USB device number 3 using ehci_hcd
>[    2.250552] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
>[    2.250904] Registered led device: phy0-led
>[    2.259877] Linux media interface: v0.10
>[    2.260285] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    2.281557] Linux video capture interface: v2.00
>[    2.286530] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
>[    2.287221] i915 0000:00:02.0: setting latency timer to 64
>[    2.288122] input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
>[    2.288192] usbcore: registered new interface driver uvcvideo
>[    2.288194] USB Video Class driver (1.1.1)
>[    2.339770] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdb749018
>[    2.339786] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.339788] [drm:intel_opregion_setup], SWSCI supported
>[    2.339789] [drm:intel_opregion_setup], ASLE supported
>[    2.339815] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    2.339823] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    2.339825] [drm] Driver supports precise vblank timestamp query.
>[    2.339830] [drm:intel_detect_pch], Found Ibex Peak PCH
>[    2.339831] [drm:init_vbt_defaults], Set default to SSC at 100MHz
>[    2.339833] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd
>[    2.339835] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0
>[    2.339838] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    2.339842] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.339844] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 96200 1440 1504 1536 1758 900 903 906 912 0x8 0xa
>[    2.339849] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.339851] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.339854] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.340189] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.340212] [drm:intel_modeset_init], 2 display pipes available.
>[    2.340218] [drm:intel_modeset_init], plane 0 init failed: -19
>[    2.340221] [drm:intel_modeset_init], plane 1 init failed: -19
>[    2.340225] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.340529] [drm:intel_lvds_init], LVDS is not present in VBT
>[    2.340572] [drm:intel_dp_init], cur t1_t3 3000 t8 400 t9 2000 t10 500 t11_t12 6000
>[    2.340575] [drm:intel_dp_init], vbt t1_t3 3000 t8 400 t9 2000 t10 500 t11_t12 5000
>[    2.340578] [drm:intel_dp_init], panel power up delay 300, power down delay 50, power cycle delay 600
>[    2.340581] [drm:intel_dp_init], backlight on delay 40, off delay 200
>[    2.340583] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    2.340592] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f
>[    2.341196] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    2.341198] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    2.341200] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    2.341202] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    2.341604] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.342006] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.342029] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    2.342033] [drm:intel_panel_get_backlight], get backlight PWM = 93
>[    2.342036] [drm:intel_panel_get_max_backlight], max backlight PWM = 93
>[    2.342065] [drm:intel_panel_get_backlight], get backlight PWM = 93
>[    2.342103] [drm:intel_crt_init], pch crt adpa set to 0xf40000
>[    2.342957] usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187
>[    2.342960] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.342962] usb 2-1.7: Product: DW375 Bluetooth Module
>[    2.342964] usb 2-1.7: Manufacturer: Dell Computer Corp
>[    2.342966] usb 2-1.7: SerialNumber: 70F1A151D351
>[    2.344421] [drm:intel_sdvo_read_byte], i2c transfer returned -6
>[    2.344425] [drm:intel_sdvo_init], No SDVO device found on SDVOB
>[    2.344513] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[    2.345022] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    2.345024] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.345531] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    2.345534] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.345640] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[    2.346147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    2.346150] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.346657] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    2.346661] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.346691] [drm:ironlake_edp_backlight_off], 
>[    2.414979] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
>[    2.533169] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
>[    2.533174] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.533178] usb 2-1.8: Product: 5880
>[    2.533180] usb 2-1.8: Manufacturer: Broadcom Corp
>[    2.533183] usb 2-1.8: SerialNumber: 0123456789ABCD
>[    2.533318] usb 2-1.8: config 0 descriptor??
>[    2.546360] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    2.546371] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    2.546379] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[    2.630353] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd
>[    2.727481] usb 1-1.2.1: New USB device found, idVendor=1130, idProduct=0202
>[    2.727486] usb 1-1.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    2.727490] usb 1-1.2.1: Product: Tenx Nonstandard Devic
>[    2.762831] input: Tenx Nonstandard Devic as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input7
>[    2.762997] generic-usb 0003:1130:0202.0001: input,hidraw0: USB HID v1.10 Device [Tenx Nonstandard Devic] on usb-0000:00:1a.0-1.2.1/input0
>[    2.764423] input: Tenx Nonstandard Devic as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input8
>[    2.764523] generic-usb 0003:1130:0202.0002: input,hidraw1: USB HID v1.10 Device [Tenx Nonstandard Devic] on usb-0000:00:1a.0-1.2.1/input1
>[    2.764541] usbcore: registered new interface driver usbhid
>[    2.764543] usbhid: USB HID core driver
>[    2.791246] dell_wmi: Received unknown WMI event (0x11)
>[    2.813902] usb 1-1.2.3: new high-speed USB device number 7 using ehci_hcd
>[    2.906318] usb 1-1.2.3: New USB device found, idVendor=0424, idProduct=2504
>[    2.906325] usb 1-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.906815] hub 1-1.2.3:1.0: USB hub found
>[    2.907034] hub 1-1.2.3:1.0: 4 ports detected
>[    3.176973] usb 1-1.2.3.1: new low-speed USB device number 8 using ehci_hcd
>[    3.283654] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input9
>[    3.290953] usb 1-1.2.3.1: New USB device found, idVendor=413c, idProduct=2003
>[    3.290961] usb 1-1.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.290968] usb 1-1.2.3.1: Product: Dell USB Keyboard
>[    3.290973] usb 1-1.2.3.1: Manufacturer: Dell
>[    3.295335] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3.1/1-1.2.3.1:1.0/input/input10
>[    3.295701] generic-usb 0003:413C:2003.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.2.3.1/input0
>[    3.297615] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
>[    3.312422] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    3.312432] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    3.312441] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    3.312456] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008
>[    3.312465] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[    3.380510] usb 1-1.2.3.2: new low-speed USB device number 9 using ehci_hcd
>[    3.477345] usb 1-1.2.3.2: New USB device found, idVendor=046d, idProduct=c016
>[    3.477351] usb 1-1.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.477355] usb 1-1.2.3.2: Product: Optical USB Mouse
>[    3.477357] usb 1-1.2.3.2: Manufacturer: Logitech
>[    3.480214] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3.2/1-1.2.3.2:1.0/input/input12
>[    3.480423] generic-usb 0003:046D:C016.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1.2.3.2/input0
>[    3.616203] [drm:intel_dp_link_down], 
>[    3.695492] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    3.695721] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[    3.695730] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[    3.696374] [drm:intel_update_fbc], 
>[    3.696377] [drm:intel_update_fbc], no output, disabling
>[    3.696383] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[    3.696388] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[    3.696393] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[    3.696397] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[    3.697037] [drm:intel_update_fbc], 
>[    3.697039] [drm:intel_update_fbc], no output, disabling
>[    3.697045] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 0 has_pch_edp 0 has_cpu_edp 1 has_ck505 0
>[    3.697457] [drm:ironlake_enable_drps], fmax: 0, fmin: 10, fstart: 8
>[    3.802988] [drm:init_status_page], render ring hws offset: 0x00000000
>[    3.803218] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[    3.803334] [drm:i915_setup_compression], FBC base 0xde000000, ll base 0x00000000, size 28M
>[    3.803385] [drm:ironlake_edp_backlight_off], 
>[    4.006755] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    4.006762] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    4.006768] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 00000000 control abcd0000
>[    4.006775] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.006781] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    4.006786] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.006797] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008
>[    4.006802] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[    4.310470] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    4.310694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1]
>[    4.310697] [drm:intel_dp_detect], DPCD: 110a810100000100
>[    4.310699] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.310702] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    4.312917] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    4.378478] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    4.378480] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    4.378482] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.378485] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    4.380698] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    4.446300] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    4.446308] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    4.446309] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    4.446313] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1] probed modes :
>[    4.446315] [drm:drm_mode_debug_printmodeline], Modeline 20:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[    4.446318] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 40 64130 1440 1504 1536 1758 900 903 906 912 0x40 0x9
>[    4.446322] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    4.446325] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    4.461580] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    4.461586] [drm:intel_crt_detect], CRT not detected via hotplug
>[    4.461590] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    4.461596] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[    4.473055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[    4.473057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[    4.473564] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.482041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.490016] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.497464] [drm:intel_dp_detect], DPCD: 0000000000000000
>[    4.497471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[    4.497477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[    4.620999] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    4.621003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] probed modes :
>[    4.621005] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[    4.621008] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.621011] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.621014] [drm:drm_mode_debug_printmodeline], Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    4.621017] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    4.621019] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.621022] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    4.621025] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.621028] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    4.621030] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.621033] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    4.621036] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[    4.621572] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.629672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.637633] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[    4.645121] [drm:intel_dp_detect], DPCD: 0000000000000000
>[    4.645127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[    4.645132] [drm:drm_setup_crtcs], 
>[    4.645137] [drm:drm_enable_connectors], connector 5 enabled? yes
>[    4.645140] [drm:drm_enable_connectors], connector 9 enabled? no
>[    4.645143] [drm:drm_enable_connectors], connector 12 enabled? no
>[    4.645147] [drm:drm_enable_connectors], connector 13 enabled? no
>[    4.645150] [drm:drm_enable_connectors], connector 16 enabled? yes
>[    4.645153] [drm:drm_enable_connectors], connector 17 enabled? no
>[    4.645157] [drm:drm_target_preferred], looking for cmdline mode on connector 5
>[    4.645160] [drm:drm_target_preferred], looking for preferred mode on connector 5
>[    4.645164] [drm:drm_target_preferred], found mode 1440x900
>[    4.645167] [drm:drm_target_preferred], looking for cmdline mode on connector 16
>[    4.645170] [drm:drm_target_preferred], looking for preferred mode on connector 16
>[    4.645174] [drm:drm_target_preferred], found mode 1600x1200
>[    4.645177] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    4.645184] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3
>[    4.645189] [drm:drm_setup_crtcs], desired mode 1600x1200 set on crtc 4
>[    4.657251] [drm:intelfb_create], allocated 1600x1200 fb: 0x00043000, bo ffff880113ef2c00
>[    4.657510] fbcon: inteldrmfb (fb0) is primary device
>[    4.658975] [drm:drm_crtc_helper_set_config], 
>[    4.658977] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    4.658985] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[    4.658987] [drm:drm_crtc_helper_set_config], modes are different, full mode set
>[    4.658989] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.658991] [drm:drm_mode_debug_printmodeline], Modeline 35:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[    4.658994] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[    4.658996] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[    4.658998] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    4.658999] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[    4.659001] [drm:drm_mode_debug_printmodeline], Modeline 35:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[    4.659006] dp mode_fixup, bpp: 18
>[    4.659007] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[    4.659010] [drm:drm_crtc_helper_set_mode], [CRTC:3]
>[    4.659011] [drm:ironlake_edp_backlight_off], 
>[    4.860555] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    4.860562] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    4.860567] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 00000000 control abcd0000
>[    4.860573] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.860578] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    4.860583] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.860593] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008
>[    4.860597] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[    5.164330] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    5.164354] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to eDP (6)
>[    5.164356] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
>[    5.164358] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[    5.164359] [drm:drm_mode_debug_printmodeline], Modeline 35:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[    5.164364] [drm:ironlake_set_pll_edp], eDP PLL enable for clock 270000
>[    5.219673] [drm:intel_wait_for_vblank], vblank wait timed out
>[    5.219681] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 6400
>[    5.219686] [drm:intel_update_fbc], 
>[    5.219689] [drm:intel_update_fbc], fbc set to per-chip default
>[    5.219691] [drm:intel_update_fbc], fbc disabled per module param
>[    5.219695] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[    5.219700] [drm:ironlake_check_srwm], watermark 1: display plane 32, fbc lines 3, cursor 6
>[    5.219704] [drm:ironlake_check_srwm], watermark 2: display plane 92, fbc lines 4, cursor 6
>[    5.219709] [drm:drm_crtc_helper_set_mode], [ENCODER:6:TMDS-6] set [MODE:35:1440x900]
>[    5.219714] [drm:ironlake_edp_pll_on], 
>[    5.219915] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[    5.219917] [drm:ironlake_check_srwm], watermark 1: display plane 32, fbc lines 3, cursor 6
>[    5.219919] [drm:ironlake_check_srwm], watermark 2: display plane 92, fbc lines 4, cursor 6
>[    5.275524] [drm:intel_wait_for_vblank], vblank wait timed out
>[    5.331390] [drm:intel_wait_for_vblank], vblank wait timed out
>[    5.331394] [drm:intel_update_fbc], 
>[    5.331396] [drm:intel_update_fbc], fbc set to per-chip default
>[    5.331399] [drm:intel_update_fbc], fbc disabled per module param
>[    5.331402] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    5.331406] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    5.387241] [drm:intel_wait_for_vblank], vblank wait timed out
>[    5.387748] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[    5.389359] [drm:intel_dp_start_link_train], clock recovery OK
>[    5.389362] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    5.389366] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    5.389372] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[    5.389382] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    5.389387] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0009
>[    5.738364] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    5.738374] [drm:ironlake_panel_vdd_off_sync], PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003
>[    5.796204] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[    5.796621] [drm:ironlake_edp_backlight_on], 
>[    5.838117] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[    5.838122] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:eDP-1] set DPMS on
>[    5.838144] [drm:drm_crtc_helper_set_config], 
>[    5.838147] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:37] #connectors=1 (x y) (0 0)
>[    5.838155] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[    5.838158] [drm:drm_crtc_helper_set_config], modes are different, full mode set
>[    5.838161] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.838166] [drm:drm_mode_debug_printmodeline], Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[    5.838172] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[    5.838176] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    5.838179] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[    5.838183] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[    5.838186] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[    5.838189] [drm:drm_mode_debug_printmodeline], Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[    5.838197] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[    5.838235] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[    5.838238] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[    5.838241] [drm:ironlake_crtc_mode_set], Mode for pipe 1:
>[    5.838244] [drm:drm_mode_debug_printmodeline], Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[    5.846565] dell_wmi: Received unknown WMI event (0x11)
>[    5.893973] [drm:intel_wait_for_vblank], vblank wait timed out
>[    5.893979] [drm:ironlake_update_plane], Writing base 00043000 00000000 0 0 6400
>[    5.893984] [drm:intel_update_fbc], 
>[    5.893986] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    5.893990] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[    5.893994] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 10, cursor: 6
>[    5.893999] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set [MODE:36:1600x1200]
>[    5.894005] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[    5.894009] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 10, cursor: 6
>[    5.949878] [drm:intel_wait_for_vblank], vblank wait timed out
>[    6.005695] [drm:intel_wait_for_vblank], vblank wait timed out
>[    6.006003] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
>[    6.006006] [drm:ironlake_fdi_link_train], FDI train 1 done.
>[    6.006161] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x200
>[    6.006164] [drm:ironlake_fdi_link_train], FDI train 2 done.
>[    6.006166] [drm:ironlake_fdi_link_train], FDI train done
>[    6.006453] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[    6.007372] [drm:intel_update_fbc], 
>[    6.007374] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    6.007385] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[    6.007388] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:16:HDMI-A-2] set DPMS on
>[    6.007450] [drm:drm_crtc_helper_set_config], 
>[    6.007453] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.007463] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    6.007468] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[    6.007472] [drm:drm_crtc_helper_set_config], 
>[    6.007475] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:37] #connectors=1 (x y) (0 0)
>[    6.007484] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    6.007488] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[    6.016190] Console: switching to colour frame buffer device 180x56
>[    6.016201] [drm:drm_crtc_helper_set_config], 
>[    6.016204] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.016214] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    6.016218] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[    6.016223] [drm:drm_crtc_helper_set_config], 
>[    6.016225] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:37] #connectors=1 (x y) (0 0)
>[    6.016233] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[    6.016237] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[    6.025051] fb0: inteldrmfb frame buffer device
>[    6.025054] drm: registered panic notifier
>[    6.053647] acpi device:3d: registered as cooling_device4
>[    6.058295] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
>[    6.058512] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>[    6.058626] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    6.058751] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[    6.108676] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
>[    6.123757] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
>[    6.123849] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
>[    6.123981] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[    6.124172] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
>[    6.124364] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>[    6.454079] EXT4-fs (sda5): re-mounted. Opts: (null)
>[    6.497345] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,discard
>[    6.526298] device-mapper: uevent: version 1.0.3
>[    6.526416] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>[    7.286564] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
>[   16.020535] [drm:intel_dp_detect], DPCD: 110a810100000100
>[   16.020541] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[   16.020553] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f
>[   16.022764] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   16.088253] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   16.088259] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[   16.088265] [drm:output_poll_execute], [CONNECTOR:5:eDP-1] status updated from 1 to 1
>[   16.088273] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   16.088279] [drm:intel_crt_detect], CRT not detected via hotplug
>[   16.088338] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[   16.099844] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[   16.100405] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.108825] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.116785] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.124262] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   16.124269] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[   16.186146] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 1 to 1
>[   16.186659] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.192596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.200593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   16.208051] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   16.208057] [drm:output_poll_execute], [CONNECTOR:17:DP-2] status updated from 2 to 2
>[   18.614865] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>[   18.620811] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni))
>[   18.625006] padlock_sha: VIA PadLock Hash Engine not detected.
>[   19.071782] loop: module loaded
>[   19.084772] [drm:ironlake_panel_vdd_off_sync], PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0007
>[   19.502629] Adding 2179068k swap on /dev/mapper/sda8_crypt.  Priority:-1 extents:1 across:2179068k SS
>[   19.580280] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard
>[   19.595980] FAT-fs (sda7): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[   19.853432] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
>[   19.954534] RPC: Registered named UNIX socket transport module.
>[   19.954537] RPC: Registered udp transport module.
>[   19.954538] RPC: Registered tcp transport module.
>[   19.954539] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   19.962919] FS-Cache: Loaded
>[   19.972532] FS-Cache: Netfs 'nfs' registered for caching
>[   19.979444] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   20.229558] fuse init (API version 7.18)
>[   21.136313] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
>[   21.191588] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
>[   21.192037] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   21.193530] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
>[   21.200224] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
>[   21.245352] [drm:drm_crtc_helper_set_config], 
>[   21.245356] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   21.245376] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[   21.245381] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[   21.245385] [drm:drm_crtc_helper_set_config], 
>[   21.245388] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:37] #connectors=1 (x y) (0 0)
>[   21.245396] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[   21.245400] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[   21.253458] [drm:i915_driver_open], 
>[   21.253486] [drm:drm_crtc_helper_set_config], 
>[   21.253487] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   21.253496] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[   21.253498] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[   21.253500] [drm:drm_crtc_helper_set_config], 
>[   21.253501] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:37] #connectors=1 (x y) (0 0)
>[   21.253505] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[   21.253507] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[   21.253526] [drm:i915_driver_open], 
>[   21.253717] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[6] ENCODERS[6]
>[   21.253721] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[6] ENCODERS[6]
>[   21.253765] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   21.253768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1]
>[   21.253770] [drm:intel_dp_detect], DPCD: 110a810100000100
>[   21.253773] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[   21.253782] [drm:ironlake_edp_panel_vdd_on], PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f
>[   21.255988] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.321115] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.321118] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[   21.321121] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[   21.321124] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[   21.323362] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.388943] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.388951] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   21.388952] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[   21.388956] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1] probed modes :
>[   21.388959] [drm:drm_mode_debug_printmodeline], Modeline 20:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[   21.388962] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 40 64130 1440 1504 1536 1758 900 903 906 912 0x40 0x9
>[   21.388967] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   21.389674] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   21.389677] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   21.389681] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   21.389684] [drm:intel_crt_detect], CRT not detected via hotplug
>[   21.389686] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   21.389689] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   21.389691] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   21.389694] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   21.389695] [drm:intel_crt_detect], CRT not detected via hotplug
>[   21.389697] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   21.389721] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   21.389723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[   21.401212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[   21.401221] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   21.401226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[   21.412778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[   21.412828] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[   21.412833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[   21.413343] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.419431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.427414] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.434887] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.434896] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[   21.434906] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[   21.434911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[   21.435421] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.442581] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
>[   21.443435] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.449303] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
>[   21.451370] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.458856] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.458864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[   21.458940] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[   21.458946] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[   21.573513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   21.590713] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   21.590729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] probed modes :
>[   21.590734] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[   21.590742] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.590750] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.590758] [drm:drm_mode_debug_printmodeline], Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   21.590766] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   21.590774] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   21.590782] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   21.590790] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   21.590797] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   21.590805] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   21.590812] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   21.590827] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[   21.590916] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   21.590919] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   21.591427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.599003] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.606960] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.614441] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.614452] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   21.614470] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   21.614476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   21.614987] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.622918] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.630906] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.638378] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.638386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   21.638587] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   21.638594] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1]
>[   21.638599] [drm:intel_dp_detect], DPCD: 110a810100000100
>[   21.638605] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[   21.638611] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[   21.640820] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.706354] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.706359] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[   21.706365] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[   21.706369] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[   21.708576] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.774365] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   21.774384] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   21.774388] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[   21.774396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:eDP-1] probed modes :
>[   21.774401] [drm:drm_mode_debug_printmodeline], Modeline 20:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[   21.774409] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 40 64130 1440 1504 1536 1758 900 903 906 912 0x40 0x9
>[   21.774421] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   21.776707] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   21.776715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   21.776723] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   21.776728] [drm:intel_crt_detect], CRT not detected via hotplug
>[   21.776733] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   21.776740] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   21.776744] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   21.776749] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   21.776754] [drm:intel_crt_detect], CRT not detected via hotplug
>[   21.776758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   21.776791] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   21.776796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[   21.788213] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[   21.788221] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   21.788226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[   21.799625] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[   21.799669] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[   21.799675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[   21.800185] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.806458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.814441] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.821939] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.821946] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[   21.821954] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[   21.821959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[   21.822468] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.830424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.838404] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.845882] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.845889] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[   21.845940] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[   21.845945] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[   21.968760] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   21.968775] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] probed modes :
>[   21.968780] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
>[   21.968788] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.968796] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.968804] [drm:drm_mode_debug_printmodeline], Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   21.968812] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   21.968820] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   21.968827] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   21.968835] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   21.968843] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   21.968850] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   21.968858] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   21.968870] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[   21.970016] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   21.970022] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   21.970532] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.978070] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.986079] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   21.993507] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   21.993514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   21.993523] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   21.993527] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   21.994036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   22.001991] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   22.009951] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[   22.017446] [drm:intel_dp_detect], DPCD: 0000000000000000
>[   22.017455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   22.029815] [drm:drm_mode_addfb], [FB:38]
>[   22.029904] [drm:drm_mode_setcrtc], [CRTC:3]
>[   22.029910] [drm:drm_mode_setcrtc], [CONNECTOR:5:eDP-1]
>[   22.029912] [drm:drm_crtc_helper_set_config], 
>[   22.029913] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:38] #connectors=1 (x y) (0 0)
>[   22.029924] [drm:drm_crtc_helper_set_config], modes are different, full mode set
>[   22.029926] [drm:drm_mode_debug_printmodeline], Modeline 35:"1440x900" 60 96200 1440 1504 1536 1758 900 903 906 912 0x48 0x9
>[   22.029929] [drm:drm_mode_debug_printmodeline], Modeline 39:"1152x864" 0 81620 1152 1216 1336 1520 864 865 868 895 0x0 0x6
>[   22.029933] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:eDP-1] to [CRTC:3]
>[   22.029935] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-2] to [CRTC:4]
>[   22.029937] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[   22.029938] [drm:drm_mode_debug_printmodeline], Modeline 39:"1152x864" 0 81620 1152 1216 1336 1520 864 865 868 895 0x0 0x6
>[   22.029943] dp mode_fixup, bpp: 18
>[   22.029944] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[   22.029947] [drm:drm_crtc_helper_set_mode], [CRTC:3]
>[   22.029948] [drm:ironlake_edp_backlight_off], 
>[   22.037075] dell_wmi: Received unknown WMI event (0x11)
>[   22.110525] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
>[   22.232859] [drm:ironlake_edp_panel_off], Turn eDP power off
>[   22.232869] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[   22.232876] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000

Actions: View

Attachments on bug 48170: 59360 | 59363 | 59365 | 59367 | 59428 | 59481 | 59486 | 59504 | 59505 | 59683 | 59708

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.