Attachment 59336 Details for Bug 48157 – dmesg from Ubuntu 3.2.0-20.33, with patch (and working audio)

dmesg from Ubuntu 3.2.0-20.33, with patch (and working audio)

dmesg.txt (text/plain), 73.90 KB, created by Bernard B on 2012-04-01 05:21:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernard B

Created: 2012-04-01 05:21:12 UTC

Size: 73.90 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.2.0-20-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #33-Ubuntu SMP Tue Mar 27 16:45:08 UTC 2012 (Ubuntu 3.2.0-20.33-generic 3.2.12)
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f790000 (usable)
> BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
> BIOS-e820: 000000007f79e000 - 000000007f7d0000 (ACPI NVS)
> BIOS-e820: 000000007f7d0000 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
>NX (Execute Disable) protection: approximated by x86 segment limits
>DMI 2.5 present.
>DMI: Dell Inc. Studio Hybrid 140g/0P096C, BIOS 1.0.6 09/26/2008
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7f790 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-E3FFF write-protect
>  E4000-E7FFF write-through
>  E8000-EBFFF write-protect
>  EC000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F800000 mask FFF800000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2040MB, range: 8MB, type UC
>total RAM covered: 2040M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 2  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2040MB, range: 8MB, type UC
>found SMP MP-table at [c00ff780] ff780
>initial memory mapped : 0 - 01c00000
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
>RAMDISK: 369f3000 - 37ff0000
>Allocated new RAMDISK: 353f6000 - 369f2f82
>Move RAMDISK from 00000000369f3000 - 0000000037feff81 to 353f6000 - 369f2f81
>Reserving 64MB of memory at 448MB for crashkernel (System RAM: 2039MB)
>ACPI: RSDP 000fa470 00014 (v00 ACPIAM)
>ACPI: RSDT 7f790000 00044 (v01 DELL    AS09    20080926 MSFT 00000097)
>ACPI: FACP 7f790200 00084 (v01 092608 FACP1629 20080926 MSFT 00000097)
>ACPI: DSDT 7f7905b0 05759 (v01  1ADJS 1ADJS016 00000016 INTL 20060210)
>ACPI: FACS 7f79e000 00040
>ACPI: APIC 7f790390 0005C (v01 092608 APIC1629 20080926 MSFT 00000097)
>ACPI: MCFG 7f7903f0 0003C (v01 092608 OEMMCFG  20080926 MSFT 00000097)
>ACPI: SLIC 7f790430 00176 (v01 DELL    AS09    20080926 MSFT 00000097)
>ACPI: OEMB 7f79e040 00077 (v01 092608 OEMB1629 20080926 MSFT 00000097)
>ACPI: HPET 7f795d10 00038 (v01 092608 OEMHPET  20080926 MSFT 00000097)
>ACPI: GSCI 7f79e0c0 02024 (v01 092608 GMCHSCI  20080926 MSFT 00000097)
>ACPI: SSDT 7f7a0a30 004E6 (v01  PmRef    CpuPm 00003000 INTL 20060210)
>ACPI: Local APIC address 0xfee00000
>1151MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007f790
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f790
>On node 0 totalpages: 522015
>free_area_init_node: node 0, pgdat c18259c0, node_mem_map f4406200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2304 pages used for memmap
>  HighMem zone: 292498 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @f7000000 s31616 r0 d21632 u2097152
>pcpu-alloc: s31616 r0 d21632 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517935
>Kernel command line: root=UUID=842b9358-2dc9-44e1-b067-5b294c19eed8 ro quiet splash vga=0  crashkernel=384M-2G:64M,2G-:128M drm.debug=0x06
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>allocated 8353792 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000377fe:0007f790)
>Memory: 1964544k/2088512k available (5626k kernel code, 123516k reserved, 2766k data, 712k init, 1179208k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1833000 - 0xc18e5000   ( 712 kB)
>      .data : 0xc157e844 - 0xc1832180   (2766 kB)
>      .text : 0xc1000000 - 0xc157e844   (5626 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU dyntick-idle grace-period acceleration is enabled.
>NR_IRQS:2304 nr_irqs:512 16
>CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2394.184 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.36 BogoMIPS (lpj=9576736)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>AppArmor: AppArmor initialized
>Yama: becoming mindful.
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20110623
>ftrace: allocating 25951 entries in 51 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>NMI watchdog enabled, takes one hw-pmu counter.
>CPU 1 irqstacks, hard=f6cea000 soft=f6cec000
>Booting Node   0, Processors  #1 Ok.
>smpboot cpu 1: start_ip = 9b000
>Initializing CPU#1
>NMI watchdog enabled, takes one hw-pmu counter.
>Brought up 2 CPUs
>Total of 2 processors activated (9576.31 BogoMIPS).
>devtmpfs: initialized
>EVM: security.selinux
>EVM: security.SMACK64
>EVM: security.capability
>PM: Registering ACPI NVS region at 7f79e000 (204800 bytes)
>print_constraints: dummy: 
>RTC time: 22:07:41, date: 04/01/12
>NET: Registered protocol family 16
>Trying to unpack rootfs image as initramfs...
>EISA bus registered
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 7f7a01c0 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20060210)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20060210)
>ACPI: SSDT 7f7a0490 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20060210)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20060210)
>ACPI: SSDT 7f7a00f0 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20060210)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20060210)
>ACPI: SSDT 7f7a0400 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060210)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060210)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xdfffffff]
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
>pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
>pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xfe600000-0xfe6fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xc400-0xc407]
>pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xfe700000-0xfe7fffff 64bit]
>pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0xc480-0xc49f]
>pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xfe8fdc00-0xfe8fdfff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xfe8f8000-0xfe8fbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xc880-0xc89f]
>pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xcc00-0xcc1f]
>pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xd000-0xd01f]
>pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xfe8fe800-0xfe8febff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0200 (mask 00ff)
>pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
>pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0xd880-0xd887]
>pci 0000:00:1f.2: reg 14: [io  0xd800-0xd803]
>pci 0000:00:1f.2: reg 18: [io  0xd480-0xd487]
>pci 0000:00:1f.2: reg 1c: [io  0xd400-0xd403]
>pci 0000:00:1f.2: reg 20: [io  0xd080-0xd09f]
>pci 0000:00:1f.2: reg 24: [mem 0xfe8fe000-0xfe8fe7ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xfe8fec00-0xfe8fecff]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:00:1f.6: [8086:284f] type 0 class 0x001180
>pci 0000:00:1f.6: reg 10: [mem 0xfe8ff000-0xfe8fffff 64bit]
>pci 0000:00:01.0: PCI bridge to [bus 05-05]
>pci 0000:04:00.0: [14e4:4328] type 0 class 0x000280
>pci 0000:04:00.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
>pci 0000:04:00.0: reg 18: [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 04-04]
>pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:03:00.0: [197b:2380] type 0 class 0x000c00
>pci 0000:03:00.0: reg 10: [mem 0xfeaff800-0xfeafffff]
>pci 0000:03:00.0: reg 14: [mem 0xfeaff400-0xfeaff47f]
>pci 0000:03:00.0: reg 20: [mem 0xfeaff000-0xfeaff07f]
>pci 0000:03:00.0: reg 24: [mem 0xfeafec00-0xfeafec7f]
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:02:00.0: reg 10: [io  0xe800-0xe8ff]
>pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
>pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
>pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.3: PCI bridge to [bus 02-02]
>pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.3:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0xdfffffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC control (0x1d) granted
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>i2c-core: driver [aat2870] using legacy suspend method
>i2c-core: driver [aat2870] using legacy resume method
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000007f790000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>AppArmor: AppArmor Filesystem Enabled
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x7f800000-0xdfffffff window]
>pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed14000-0xfed19fff]
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0081-0x0083]
>pnp 00:02: [io  0x0087]
>pnp 00:02: [io  0x0089-0x008b]
>pnp 00:02: [io  0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x0000-0xffffffff disabled]
>pnp 00:06: [io  0x0a00-0x0a0f]
>system 00:06: [io  0x0a00-0x0a0f] has been reserved
>system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:07: [io  0x0010-0x001f]
>pnp 00:07: [io  0x0022-0x003f]
>pnp 00:07: [io  0x0044-0x005f]
>pnp 00:07: [io  0x0062-0x0063]
>pnp 00:07: [io  0x0065-0x006f]
>pnp 00:07: [io  0x0072-0x007f]
>pnp 00:07: [io  0x0080]
>pnp 00:07: [io  0x0084-0x0086]
>pnp 00:07: [io  0x0088]
>pnp 00:07: [io  0x008c-0x008e]
>pnp 00:07: [io  0x0090-0x009f]
>pnp 00:07: [io  0x00a2-0x00bf]
>pnp 00:07: [io  0x00e0-0x00ef]
>pnp 00:07: [io  0x04d0-0x04d1]
>pnp 00:07: [io  0x0800-0x087f]
>pnp 00:07: [io  0x0400-0x040f]
>pnp 00:07: [io  0x0500-0x053f]
>pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:07: [mem 0xfed20000-0xfed3ffff]
>pnp 00:07: [mem 0xfed40000-0xfed8ffff]
>pnp 00:07: disabling [io  0x0400-0x040f] because it overlaps 0000:00:1f.3 BAR 4 [io  0x0400-0x041f]
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x0800-0x087f] has been reserved
>system 00:07: [io  0x0500-0x053f] has been reserved
>system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [mem 0xfed00000-0xfed003ff]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:09: [mem 0xffb00000-0xffbfffff]
>pnp 00:09: [mem 0xfff00000-0xffffffff]
>pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:0a: [mem 0xffc00000-0xffefffff]
>system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [io  0x0060]
>pnp 00:0b: [io  0x0064]
>pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0xe0000000-0xefffffff]
>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [mem 0x00000000-0x0009ffff]
>pnp 00:0d: [mem 0x000c0000-0x000cffff]
>pnp 00:0d: [mem 0x000e0000-0x000fffff]
>pnp 00:0d: [mem 0x00100000-0x7f7fffff]
>pnp 00:0d: [mem 0xfed90000-0xffffffff]
>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0d: [mem 0x00100000-0x7f7fffff] could not be reserved
>system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.2: BAR 15: assigned [mem 0x7f800000-0x7f9fffff 64bit pref]
>pci 0000:00:1c.2: BAR 13: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>pci 0000:00:01.0: BAR 14: assigned [mem 0x7fa00000-0x7fbfffff]
>pci 0000:00:01.0: BAR 15: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
>pci 0000:00:01.0: BAR 13: assigned [io  0x3000-0x3fff]
>pci 0000:00:01.0: PCI bridge to [bus 05-05]
>pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:01.0:   bridge window [mem 0x7fa00000-0x7fbfffff]
>pci 0000:00:01.0:   bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 04-04]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.2:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.2:   bridge window [mem 0x7f800000-0x7f9fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 02-02]
>pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.3:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0: enabling device (0104 -> 0107)
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: enabling device (0106 -> 0107)
>pci 0000:00:1c.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0x7f800000-0xdfffffff]
>pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
>pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:05: resource 1 [mem 0x7fa00000-0x7fbfffff]
>pci_bus 0000:05: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:03: resource 2 [mem 0x7f800000-0x7f9fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
>pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:01: resource 8 [mem 0x7f800000-0xdfffffff]
>pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1a.0: PCI INT A disabled
>pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1a.1: PCI INT B disabled
>pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1a.7: PCI INT C disabled
>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT A disabled
>pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1d.1: PCI INT B disabled
>pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1d.2: PCI INT C disabled
>pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.7: PCI INT A disabled
>PCI: CLS 32 bytes, default 64
>audit: initializing netlink socket (disabled)
>type=2000 audit(1333318061.248:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>fuse init (API version 7.17)
>msgmni has been set to 1533
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
>pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
>pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp 0000:00:01.0:pcie04: HPC vendor_id 8086 device_id 2a01 ss_vid 1028 ss_did 279
>pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1028 ss_did 279
>pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1028 ss_did 279
>pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 1028 ss_did 279
>pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>intel_idle: MWAIT substates: 0x3122220
>intel_idle: does not run on family 6 model 23
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>ACPI: acpi_idle registered with cpuidle
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>isapnp: Scanning for PnP cards...
>Freeing initrd memory: 22516k freed
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>brd: module loaded
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe8fe000 port 0xfe8fe100 irq 44
>ata2: SATA max UDMA/133 abar m2048@0xfe8fe000 port 0xfe8fe180 irq 44
>ata3: SATA max UDMA/133 abar m2048@0xfe8fe000 port 0xfe8fe200 irq 44
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata5: port disabled--ignoring
>Fixed MDIO Bus: probed
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>PPP generic driver version 2.4.2
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fdc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fe800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usbcore: registered new interface driver libusual
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>EISA: Probing bus 0 at eisa.0
>EISA: Cannot allocate resource for mainboard
>Cannot allocate resource for EISA slot 1
>Cannot allocate resource for EISA slot 2
>Cannot allocate resource for EISA slot 3
>Cannot allocate resource for EISA slot 4
>Cannot allocate resource for EISA slot 5
>Cannot allocate resource for EISA slot 6
>Cannot allocate resource for EISA slot 7
>Cannot allocate resource for EISA slot 8
>EISA: Detected 0 cards.
>cpufreq-nforce2: No nForce2 chipset.
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>TCP cubic registered
>NET: Registered protocol family 10
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 8:460:147
>ata_port ata4: hash matches
> ata4: hash matches
>acpi device:18: hash matches
>rtc_cmos 00:03: setting system clock to 2012-04-01 22:07:42 UTC (1333318062)
>BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>EDD information not available.
>usb 1-4: new high-speed USB device number 3 using ehci_hcd
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: ST9250320AS, DE05, max UDMA/133
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST9250320AS      DE05 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-1: new high-speed USB device number 2 using ehci_hcd
>scsi5 : usb-storage 2-1:1.0
>usb 2-3: new high-speed USB device number 3 using ehci_hcd
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD16, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640S HD16 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>usb 4-1: new low-speed USB device number 2 using uhci_hcd
>ata3: SATA link down (SStatus 0 SControl 300)
>Freeing unused kernel memory: 712k freed
>Write protecting the kernel text: 5628k
>Write protecting the kernel read-only data: 2324k
>udevd[108]: starting version 175
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 45 for MSI/MSI-X
>r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8012000, 00:21:70:49:04:c1, XID 1c4000c0 IRQ 45
>r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
>[drm] Initialized drm 1.1.0 20060810
>usbcore: registered new interface driver uas
>firewire_ohci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci 0000:03:00.0: setting latency timer to 64
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>scsi6 : usb-storage 1-4:1.0
>usbcore: registered new interface driver ums-realtek
>[drm:intel_opregion_setup], graphic opregion physical addr: 0x7f79e0e4
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:intel_opregion_setup], ASLE supported
>[drm:i915_init_phys_hws], Enabled hardware status page
>i915 0000:00:02.0: irq 46 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:init_vbt_defaults], Set default to SSC at 100MHz
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT CRESTLINE      d
>[drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_no_lvds_dmi_callback], Skipping LVDS initialization for Dell Studio Hybrid
>[drm:intel_setup_outputs], probing SDVOB
>firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
>input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
>generic-usb 0003:17EF:6014.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:1a.1-1/input0
>input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
>generic-usb 0003:17EF:6014.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:1a.1-1/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>[drm:intel_sdvo_debug_write], SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 47 02 01 01 01 01 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 2
>  device_id: 71
>  device_rev_id: 2
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 0
>  sharp_scaling: 0
>  up_scaling: 0
>  down_scaling: 0
>  stall_support: 0
>  output_flags: 1
>[drm:intel_sdvo_debug_write], SDVOB: W: 0E                         (SDVO_CMD_GET_ACTIVE_HOT_PLUG)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_debug_write], SDVOB: W: 0C                         (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00                   (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 12
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 74 40
>[drm:intel_sdvo_init], SDVOB device VID/DID: 02:47.02, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOC
>[drm:intel_tv_init], Integrated TV is not present.
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:i915_setup_compression], FBC base 0x7f800000, ll base 0x7ff00000, size 7M
>[drm] initialized overlay support
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>usb 7-2: new low-speed USB device number 2 using uhci_hcd
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>scsi 5:0:0:0: Direct-Access     WD       Elements 1023    2005 PQ: 0 ANSI: 4
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: [sdb] 976769024 512-byte logical blocks: (500 GB/465 GiB)
>sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
>sd 5:0:0:0: [sdb] Asking for cache data failed
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
>sd 5:0:0:0: [sdb] Asking for cache data failed
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 8 enabled? yes
>[drm:drm_target_preferred], looking for cmdline mode on connector 8
>[drm:drm_target_preferred], looking for preferred mode on connector 8
>[drm:drm_target_preferred], found mode 1280x720
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1280x720 set on crtc 3
>[drm:intelfb_create], allocated 1280x720 fb: 0x00040000, bo f37c9600
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:i9xx_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:i965_update_wm], self-refresh entries: 80, wm: 432
>[drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
>[drm:drm_crtc_helper_set_mode], [ENCODER:7:TMDS-7] set [MODE:12:1280x720]
>[drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 16 01 1D 00 72 51 D0 1E 20 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 17 6E 28 55 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9F 01                      (SDVO_CMD_SET_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 8E 00                      (SDVO_CMD_SET_COLORIMETRY)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 93 01 00                   (SDVO_CMD_SET_HBUF_INDEX)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 98 82 02 0D 00 6F 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9A C0                      (SDVO_CMD_SET_HBUF_TXRATE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 14 01 1D 00 72 51 D0 1E 20 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 15 6E 28 55 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 21 02                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:i965_update_wm], self-refresh entries: 80, wm: 432
>[drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:8:HDMI-A-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>Console: switching to colour frame buffer device 160x45
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>No ACPI video bus found
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:i915_driver_open], 
>[drm:i915_getparam], Unknown parameter 17
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i9xx_update_plane], Writing base 003E0000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i9xx_update_plane], Writing base 003E0000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>device label ror devid 1 transid 110 /dev/sdb1
>EXT3-fs (sda5): recovery required on readonly filesystem
>EXT3-fs (sda5): write access will be enabled during recovery
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): recovery complete
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>udevd[491]: starting version 175
>Adding 6048436k swap on /dev/sda6.  Priority:-1 extents:1 across:6048436k 
>type=1400 audit(1333314519.140:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=539 comm="apparmor_parser"
>type=1400 audit(1333314519.140:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser"
>type=1400 audit(1333314519.140:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
>type=1400 audit(1333314519.248:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=636 comm="apparmor_parser"
>type=1400 audit(1333314519.248:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
>type=1400 audit(1333314519.248:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
>sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
>sd 6:0:0:0: [sdc] Asking for cache data failed
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>type=1400 audit(1333314519.656:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=562 comm="apparmor_parser"
>type=1400 audit(1333314519.664:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=637 comm="apparmor_parser"
>r8169 0000:02:00.0: eth0: link down
>r8169 0000:02:00.0: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>init: portmap main process (736) terminated with status 127
>init: portmap main process ended, respawning
>lp: driver loaded but no devices found
>wl: module license 'MIXED/Proprietary' taints kernel.
>Disabling lock debugging due to kernel taint
>wl 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>wl 0000:04:00.0: setting latency timer to 64
>IR NEC protocol handler initialized
>lib80211_crypt: registered algorithm 'TKIP'
>IR RC5(x) protocol handler initialized
>eth1: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.38
>ip_tables: (C) 2000-2006 Netfilter Core Team
>IR RC6 protocol handler initialized
>dib0700: loaded with support for 21 different device-types
>dvb-usb: found a 'Sony PlayTV' in warm state.
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (Sony PlayTV)
>IR JVC protocol handler initialized
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>IR Sony protocol handler initialized
>DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>IR MCE Keyboard/mouse protocol handler initialized
>DiB0070: successfully identified
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (Sony PlayTV)
>DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
>lirc_dev: IR Remote Control driver registered, major 249 
>IR LIRC bridge handler initialized
>usbcore: registered new interface driver dvb_usb_af9015
>DiB0070: successfully identified
>Registered IR keymap rc-dib0700-rc5
>input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0/input6
>rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0
>dvb-usb: schedule remote query interval to 50 msecs.
>dvb-usb: Sony PlayTV successfully initialized and connected.
>dib0700: rc submit urb failed
>
>usbcore: registered new interface driver dvb_usb_dib0700
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC888: BIOS auto-probing.
>input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>EXT3-fs (sda5): using internal journal
>ppdev: user-space parallel port driver
>type=1400 audit(1333314522.560:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=980 comm="apparmor_parser"
>type=1400 audit(1333314522.564:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=980 comm="apparmor_parser"
>init: statd pre-start process (889) terminated with status 127
>device label ror devid 1 transid 110 /dev/sdb1
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>r8169 0000:02:00.0: eth0: link up
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>init: failsafe main process (909) killed by TERM signal
>type=1400 audit(1333314552.916:12): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1300 comm="apparmor_parser"
>type=1400 audit(1333314552.916:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1301 comm="apparmor_parser"
>type=1400 audit(1333314552.916:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1302 comm="apparmor_parser"
>type=1400 audit(1333314552.916:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1302 comm="apparmor_parser"
>type=1400 audit(1333314552.916:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1302 comm="apparmor_parser"
>type=1400 audit(1333314552.924:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1303 comm="apparmor_parser"
>type=1400 audit(1333314552.932:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1303 comm="apparmor_parser"
>type=1400 audit(1333314552.932:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1303 comm="apparmor_parser"
>type=1400 audit(1333314552.932:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1303 comm="apparmor_parser"
>type=1400 audit(1333314552.936:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1303 comm="apparmor_parser"
>[drm:i915_driver_open], 
>[drm:i915_driver_open], 
>[drm:i915_getparam], Unknown parameter 17
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_mode_addfb], [FB:20]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i9xx_update_plane], Writing base 007E4000 00000000 0 0 8192
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:i915_getparam], Unknown parameter 16
>[drm:i915_getparam], Unknown parameter 17
>[drm:i915_getparam], Unknown parameter 17
>[drm:drm_mode_addfb], [FB:22]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:22] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
>[drm:i9xx_update_plane], Writing base 017E4000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], fbc disabled per module param
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 14:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:i915_driver_open], 
>[drm:i915_getparam], Unknown parameter 16
>[drm:i915_getparam], Unknown parameter 17
>[drm:i915_getparam], Unknown parameter 17
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
>sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
>sd 6:0:0:0: [sdc] Asking for cache data failed

Actions: View

Attachments on bug 48157: 59333 | 59335 | 59336 | 59338 | 59346 | 59351 | 59353

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.