Attachment 35481 Details for Bug 28012 – dmesg with debug=0x06

dmesg with debug=0x06

dmesg-debug (text/plain), 30.74 KB, created by Peter Hjalmarsson on 2010-05-07 01:36:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Hjalmarsson

Created: 2010-05-07 01:36:22 UTC

Size: 30.74 KB

patch

obsolete

> 0.858825] [drm] initialized overlay support
>[    0.858850] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[    0.871474] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[    0.893628] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[    0.916828] [drm:i8xx_disable_fbc], disabled FBC
>[    0.940260] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[    0.953375] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[    0.953384] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[    0.953391] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[    0.967823] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[    0.967831] [drm:intel_sdvo_detect], SDVO response 0 0
>[    0.967834] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[    0.967838] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1
>[    0.967845] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[    0.980461] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[    0.980469] [drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
>[    0.980473] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    0.980477] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    0.980480] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    0.980484] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    0.980486] [drm:intel_calculate_wm], FIFO entries required for mode: 33
>[    0.980490] [drm:intel_calculate_wm], FIFO watermark level: -4
>[    0.980492] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
>[    0.980496] [drm:i9xx_update_wm], self-refresh entries: 43
>[    0.980499] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
>[    0.980503] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
>[    1.000565] [drm:intel_crtc_mode_set], Mode for pipe A:
>[    1.000568] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    1.023385] [drm:intel_pipe_set_base], No FB bound
>[    1.023391] [drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
>[    1.023399] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.023407] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.023415] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.023422] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.023429] [drm:intel_calculate_wm], FIFO entries required for mode: 33
>[    1.023436] [drm:intel_calculate_wm], FIFO watermark level: -4
>[    1.023443] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
>[    1.023450] [drm:i9xx_update_wm], self-refresh entries: 43
>[    1.023456] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
>[    1.046733] [drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
>[    1.046742] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.046749] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.046757] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.046764] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.046771] [drm:intel_calculate_wm], FIFO entries required for mode: 33
>[    1.046778] [drm:intel_calculate_wm], FIFO watermark level: -4
>[    1.046784] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
>[    1.046792] [drm:i9xx_update_wm], self-refresh entries: 43
>[    1.046798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
>[    1.116706] [drm:intel_tv_detect_type], Detected S-Video TV connection
>[    1.116715] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[    1.129358] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[    1.150224] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[    1.173373] [drm:i8xx_disable_fbc], disabled FBC
>[    1.196869] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1
>[    1.196877] [drm:drm_mode_debug_printmodeline], Modeline 27:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[    1.196891] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0
>[    1.196905] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[    1.196918] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[    1.196932] [drm:drm_setup_crtcs], 
>[    1.196938] [drm:drm_enable_connectors], connector 5 enabled? no
>[    1.196946] [drm:drm_enable_connectors], connector 7 enabled? no
>[    1.196953] [drm:drm_enable_connectors], connector 9 enabled? yes
>[    1.196961] [drm:drm_target_preferred], looking for cmdline mode on connector 9
>[    1.196968] [drm:drm_target_preferred], looking for preferred mode on connector 9
>[    1.196976] [drm:drm_target_preferred], found mode 848x480
>[    1.196982] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
>[    1.196992] [drm:drm_setup_crtcs], desired mode 848x480 set on crtc 3
>[    1.197000] [drm:intelfb_probe], 
>[    1.199363] [drm:intelfb_create], allocated 848x480 fb: 0x007e0000, bo f70eff00
>[    1.199375] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    1.199411] Console: switching to colour dummy device 80x25
>[    1.199739] [drm:drm_crtc_helper_set_config], 
>[    1.199742] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f70a10c0 connectors: f709a260 num_connectors: 1 (x, y) (0, 0)
>[    1.199750] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[    1.199753] [drm:drm_crtc_helper_set_config], modes are different, full mode set
>[    1.199756] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    1.199761] [drm:drm_mode_debug_printmodeline], Modeline 29:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[    1.199767] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[    1.199770] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[    1.199773] [drm:drm_mode_debug_printmodeline], Modeline 29:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[    1.199781] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[    1.212406] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[    1.212413] [drm:intel_update_watermarks], plane B (pipe 0) clock: 14513
>[    1.212416] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.212419] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.212422] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.212425] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.212427] [drm:intel_calculate_wm], FIFO entries required for mode: 4
>[    1.212430] [drm:intel_calculate_wm], FIFO watermark level: 25
>[    1.212432] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 25
>[    1.212435] [drm:i9xx_update_wm], self-refresh entries: 5
>[    1.212437] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 25, C: 2, SR 122
>[    1.212442] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
>[    1.233941] [drm:intel_crtc_mode_set], Mode for pipe A:
>[    1.233944] [drm:drm_mode_debug_printmodeline], Modeline 29:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[    1.256819] [drm:intel_pipe_set_base], Writing base 007E0000 00000000 0 0
>[    1.280161] [drm:intel_update_watermarks], plane B (pipe 0) clock: 14513
>[    1.280169] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.280175] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.280182] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.280188] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.280193] [drm:intel_calculate_wm], FIFO entries required for mode: 4
>[    1.280199] [drm:intel_calculate_wm], FIFO watermark level: 25
>[    1.280205] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 25
>[    1.280211] [drm:i9xx_update_wm], self-refresh entries: 5
>[    1.280216] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 25, C: 2, SR 122
>[    1.303463] [drm:intel_update_watermarks], plane B (pipe 0) clock: 14513
>[    1.303470] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.303477] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.303483] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.303489] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.303495] [drm:intel_calculate_wm], FIFO entries required for mode: 4
>[    1.303501] [drm:intel_calculate_wm], FIFO watermark level: 25
>[    1.303506] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 25
>[    1.303512] [drm:i9xx_update_wm], self-refresh entries: 5
>[    1.303518] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 25, C: 2, SR 122
>[    1.303564] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[    1.316197] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[    1.316202] [drm:intel_update_watermarks], plane B (pipe 0) clock: 14513
>[    1.316205] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[    1.316208] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[    1.316211] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[    1.316214] [drm:intel_calculate_wm], FIFO watermark level: 26
>[    1.316216] [drm:intel_calculate_wm], FIFO entries required for mode: 4
>[    1.316219] [drm:intel_calculate_wm], FIFO watermark level: 25
>[    1.316221] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 25
>[    1.316223] [drm:i9xx_update_wm], self-refresh entries: 5
>[    1.316226] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 25, C: 2, SR 122
>[    1.316230] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[    1.336731] [drm:i8xx_disable_fbc], disabled FBC
>[    1.363729] Console: switching to colour frame buffer device 106x30
>[    1.363734] [drm:drm_crtc_helper_set_config], 
>[    1.363736] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f70a10c0 connectors: f709a260 num_connectors: 1 (x, y) (0, 0)
>[    1.363743] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[    1.367194] fb0: inteldrmfb frame buffer device
>[    1.367197] registered panic notifier
>[    1.367202] [drm:intel_opregion_init], graphic opregion physical addr: 0x0
>[    1.367205] [drm:intel_opregion_init], ACPI OpRegion not supported!
>[    1.367211] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.367284] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.370058] brd: module loaded
>[    1.371138] loop: module loaded
>[    1.371369] ahci 0000:00:1f.2: version 3.0
>[    1.371392] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.371432] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
>[    1.371506] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
>[    1.371512] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
>[    1.371517] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.371693] scsi0 : ahci
>[    1.371855] scsi1 : ahci
>[    1.371991] scsi2 : ahci
>[    1.372129] scsi3 : ahci
>[    1.372341] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 26
>[    1.372344] ata2: DUMMY
>[    1.372347] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 26
>[    1.372350] ata4: DUMMY
>[    1.372428] ata_piix 0000:00:1f.1: version 2.13
>[    1.372440] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.372478] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    1.372567] scsi4 : ata_piix
>[    1.372715] scsi5 : ata_piix
>[    1.373543] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>[    1.373547] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>[    1.373693] ata6: port disabled. ignoring.
>[    1.373818] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>[    1.373820] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
>[    1.373869] e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.373888] e1000e 0000:02:00.0: setting latency timer to 64
>[    1.374045] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>[    1.426263] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
>[    1.476743] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:01:80:66:47:d5
>[    1.476746] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
>[    1.476836] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
>[    1.476916] ath5k 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.476942] ath5k 0000:03:04.0: registered as 'phy0'
>[    1.540492] ata5.01: ATAPI: MATSHITADVD-RAM UJ-85JS, F100, max UDMA/33
>[    1.553728] ata5.01: configured for UDMA/33
>[    1.693356] ata3: SATA link down (SStatus 0 SControl 300)
>[    1.693379] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.694187] ata1.00: ATA-7: ST980811AS, 3.ALB, max UDMA/133
>[    1.694190] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    1.696214] ata1.00: configured for UDMA/133
>[    1.696329] scsi 0:0:0:0: Direct-Access     ATA      ST980811AS       3.AL PQ: 0 ANSI: 5
>[    1.696603] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.696709] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    1.696770] sd 0:0:0:0: [sda] Write Protect is off
>[    1.696773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.696800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.954967] scsi 4:0:1:0: CD-ROM            MATSHITA DVD-RAM UJ-85JS  F100 PQ: 0 ANSI: 5
>[    2.027530] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
>[    2.027534] Uniform CD-ROM driver Revision: 3.20
>[    2.066385] ath: EEPROM regdomain: 0x30
>[    2.066387] ath: EEPROM indicates we should expect a direct regpair map
>[    2.066391] ath: Country alpha2 being used: AM
>[    2.066393] ath: Regpair used: 0x30
>[    2.066629] sr 4:0:1:0: Attached scsi CD-ROM sr0
>[    2.066703]  sda:
>[    2.066842] sr 4:0:1:0: Attached scsi generic sg1 type 5
>[    2.073278] phy0: Selected rate control algorithm 'minstrel'
>[    2.073428] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
>[    2.073452] cfg80211: Calling CRDA for country: AM
>[    2.073586] firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    2.073593] firewire_ohci 0000:03:03.0: setting latency timer to 64
>[    2.120760]  sda1 sda2
>[    2.121343] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.137560] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
>[    2.137664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.137710] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    2.137728] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    2.137736] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    2.137752] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    2.137787] ehci_hcd 0000:00:1d.7: using broken periodic workaround
>[    2.141694] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    2.141707] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
>[    2.154227] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    2.154593] hub 1-0:1.0: USB hub found
>[    2.154612] hub 1-0:1.0: 8 ports detected
>[    2.154709] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.154752] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    2.154759] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    2.154763] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    2.154769] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    2.154795] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
>[    2.154967] hub 2-0:1.0: USB hub found
>[    2.154972] hub 2-0:1.0: 2 ports detected
>[    2.155017] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    2.155024] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    2.155027] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    2.155033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    2.155057] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
>[    2.155229] hub 3-0:1.0: USB hub found
>[    2.155234] hub 3-0:1.0: 2 ports detected
>[    2.155279] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    2.155286] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    2.155290] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    2.155295] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    2.155328] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
>[    2.155499] hub 4-0:1.0: USB hub found
>[    2.155504] hub 4-0:1.0: 2 ports detected
>[    2.155546] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>[    2.155553] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    2.155556] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    2.155562] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    2.155587] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
>[    2.155757] hub 5-0:1.0: USB hub found
>[    2.155762] hub 5-0:1.0: 2 ports detected
>[    2.156017] PNP: No PS/2 controller found. Probing ports directly.
>[    2.407100] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.407286] mice: PS/2 mouse device common for all mice
>[    2.407471] rtc_cmos 00:03: RTC can wake from S4
>[    2.407561] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    2.407591] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>[    2.407651] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    2.414233] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>[    2.414470] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
>[    2.414595] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.414611] iTCO_vendor_support: vendor-support=0
>[    2.414784] device-mapper: uevent: version 1.0.3
>[    2.414955] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>[    2.420897] cpuidle: using governor ladder
>[    2.420902] cpuidle: using governor menu
>[    2.420907] ioatdma: Intel(R) QuickData Technology Driver 4.00
>[    2.422409] usbcore: registered new interface driver hiddev
>[    2.422456] usbcore: registered new interface driver usbhid
>[    2.422458] usbhid: USB HID core driver
>[    2.422784] fujitsu-laptop: driver 0.6.0 successfully loaded.
>[    2.422937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    2.422982] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>[    2.423009] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    2.473534] hda_codec: ALC883: BIOS auto-probing.
>[    2.477741] ALSA device list:
>[    2.477743]   #0: HDA Intel at 0xfdff8000 irq 28
>[    2.477839] TCP cubic registered
>[    2.477841] Initializing XFRM netlink socket
>[    2.477846] NET: Registered protocol family 17
>[    2.477863] NET: Registered protocol family 15
>[    2.478618] SCTP: Hash tables configured (established 65536 bind 65536)
>[    2.479295] Using IPI No-Shortcut mode
>[    2.479494] registered taskstats version 1
>[    2.479804] rtc_cmos 00:03: setting system clock to 2010-05-07 08:19:41 UTC (1273220381)
>[    2.479882] Freeing unused kernel memory: 384k freed
>[    2.637673] firewire_core: created device fw0: GUID 00018013946647d5, S400
>[    2.740048] usb 2-2: new low speed USB device using uhci_hcd and address 2
>[    2.930451] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
>[    2.930701] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
>[    2.963762] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
>[    2.964140] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
>[    3.190046] usb 3-1: new full speed USB device using uhci_hcd and address 2
>[    4.898899] EXT4-fs (sda1): mounted filesystem with ordered data mode
>[   19.727697] udev: starting version 151
>[   21.891746] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k 
>[   22.830435] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>[   22.886823] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
>[   25.624346] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>[   26.666998] [drm:drm_crtc_helper_set_config], 
>[   26.667002] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f70a10c0 connectors: f709a260 num_connectors: 1 (x, y) (0, 0)
>[   26.667015] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   46.066960] Starting a clean X
>[   46.178021] [drm:drm_crtc_helper_set_config], 
>[   46.178028] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f70a10c0 connectors: f709a260 num_connectors: 1 (x, y) (0, 0)
>[   46.178050] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   46.279080] [drm:i915_driver_open], 
>[   46.279126] [drm:drm_crtc_helper_set_config], 
>[   46.279129] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f70a10c0 connectors: f709a260 num_connectors: 1 (x, y) (0, 0)
>[   46.279142] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   46.279146] [drm:drm_crtc_helper_set_config], 
>[   46.279149] [drm:drm_crtc_helper_set_config], crtc: ef471800 4 fb: f70a10c0 connectors: f709a250 num_connectors: 0 (x, y) (0, 0)
>[   46.279156] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[   46.279159] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   46.279165] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[   46.292206] [drm:intel_sdvo_debug_response], SDVOB: R:                         (Success)
>[   46.292217] [drm:intel_update_watermarks], plane B (pipe 0) clock: 14513
>[   46.292222] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[   46.292226] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[   46.292230] [drm:intel_calculate_wm], FIFO entries required for mode: 0
>[   46.292233] [drm:intel_calculate_wm], FIFO watermark level: 26
>[   46.292236] [drm:intel_calculate_wm], FIFO entries required for mode: 4
>[   46.292239] [drm:intel_calculate_wm], FIFO watermark level: 25
>[   46.292242] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 25
>[   46.292245] [drm:i9xx_update_wm], self-refresh entries: 5
>[   46.292248] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 25, C: 2, SR 122
>[   46.292254] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[   46.314222] [drm:i8xx_disable_fbc], disabled FBC
>[   46.336952] [drm:i915_driver_open], 
>[   46.337170] [drm:drm_mode_getresources], Counted 2 3 3
>[   46.337176] [drm:drm_mode_getresources], Counted 2 3 3
>[   46.337206] [drm:drm_mode_getconnector], connector id 5:
>[   46.337210] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   46.350869] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   46.350884] [drm:drm_mode_getconnector], connector id 5:
>[   46.350893] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   46.363393] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   46.363468] [drm:drm_mode_getconnector], connector id 7:
>[   46.363477] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   46.363484] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   46.377912] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   46.377920] [drm:intel_sdvo_detect], SDVO response 0 0
>[   46.377924] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   46.377930] [drm:drm_mode_getconnector], connector id 7:
>[   46.377934] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   46.377937] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   46.392349] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   46.392356] [drm:intel_sdvo_detect], SDVO response 0 0
>[   46.392360] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   46.392378] [drm:drm_mode_getconnector], connector id 9:
>[   46.392382] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1
>[   46.436702] [drm:intel_tv_detect_type], Detected S-Video TV connection
>[   46.436732] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1
>[   46.436740] [drm:drm_mode_debug_printmodeline], Modeline 27:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[   46.436754] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0
>[   46.436768] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[   46.436782] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[   46.436801] [drm:drm_mode_getconnector], connector id 9:
>[   46.436863] [drm:drm_mode_getconnector], connector id 5:
>[   46.436871] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   46.450888] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   46.450899] [drm:drm_mode_getconnector], connector id 5:
>[   46.450907] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   46.463393] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   46.463424] [drm:drm_mode_getconnector], connector id 7:
>[   46.463432] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   46.463439] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   46.477872] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   46.477880] [drm:intel_sdvo_detect], SDVO response 0 0
>[   46.477883] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   46.477888] [drm:drm_mode_getconnector], connector id 7:
>[   46.477892] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   46.477895] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   46.492308] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   46.492316] [drm:intel_sdvo_detect], SDVO response 0 0
>[   46.492320] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   46.492454] [drm:drm_mode_getconnector], connector id 9:
>[   46.492457] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1
>[   46.536704] [drm:intel_tv_detect_type], Detected S-Video TV connection
>[   46.536729] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1
>[   46.536737] [drm:drm_mode_debug_printmodeline], Modeline 27:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[   46.536751] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0
>[   46.536765] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[   46.536779] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[   46.536799] [drm:drm_mode_getconnector], connector id 9:
>[   46.597319] [drm:drm_crtc_helper_set_config], 
>[   46.597323] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: ef422300 connectors: f70b88c8 num_connectors: 1 (x, y) (0, 0)
>[   46.597333] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   46.600381] [drm:intel_pipe_set_base], Writing base 00A00000 00000000 0 0
>[   46.653168] [drm:i915_add_request], 1
>[   46.837771] [drm:intel_crtc_cursor_set], 
>[   46.839153] [drm:i915_add_request], 2
>[   47.336686] [drm:intel_gpu_idle_timer], idle timer fired, downclocking
>[   47.836676] [drm:intel_crtc_idle_timer], idle timer fired, downclocking
>[   59.210344] Run xrandr --verbose
>[   59.256042] [drm:drm_mode_getconnector], connector id 5:
>[   59.256049] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   59.270054] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   59.270068] [drm:drm_mode_getconnector], connector id 5:
>[   59.270076] [drm:drm_helper_probe_single_connector_modes], VGA-1
>[   59.283350] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[   59.283384] [drm:drm_mode_getconnector], connector id 7:
>[   59.283393] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   59.283401] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   59.297846] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   59.297854] [drm:intel_sdvo_detect], SDVO response 0 0
>[   59.297858] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   59.297867] [drm:drm_mode_getconnector], connector id 7:
>[   59.297870] [drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[   59.297873] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[   59.312281] [drm:intel_sdvo_debug_response], SDVOB: R: 00 00                   (Success)
>[   59.312289] [drm:intel_sdvo_detect], SDVO response 0 0
>[   59.312292] [drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[   59.312302] [drm:drm_mode_getconnector], connector id 9:
>[   59.312306] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1
>[   59.356701] [drm:intel_tv_detect_type], Detected S-Video TV connection
>[   59.356731] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1
>[   59.356740] [drm:drm_mode_debug_printmodeline], Modeline 27:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[   59.356754] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0
>[   59.356768] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[   59.356782] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[   59.356809] [drm:drm_mode_getconnector], connector id 9:
>[   59.359077] [drm:intel_crtc_cursor_set], 
>[   59.359080] [drm:intel_crtc_cursor_set], cursor off
>[   59.400517] [drm:i915_add_request], 3
>[   59.405138] [drm:drm_crtc_helper_set_config], 
>[   59.405142] [drm:drm_crtc_helper_set_config], crtc: ef470800 3 fb: f543bcc0 connectors: f71b7f10 num_connectors: 1 (x, y) (0, 0)
>[   59.405155] [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ef470800
>[   59.408296] [drm:intel_pipe_set_base], Writing base 00C00000 00000000 0 0
>[   59.444410] [drm:i915_add_request], 4
>[   59.584091] [drm:intel_crtc_cursor_set], 
>[   59.584628] [drm:i915_add_request], 5
>[   60.083364] [drm:intel_gpu_idle_timer], idle timer fired, downclocking
>[   60.583341] [drm:intel_crtc_idle_timer], idle timer fired, downclocking

Actions: View

Attachments on bug 28012: 35481 | 35482 | 35483 | 37266 | 37267 | 37268 | 37269 | 37275

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.