Attachment 34098 Details for Bug 27099 – dmesg > /tmp/dmesg

dmesg > /tmp/dmesg

dmesg (text/plain), 26.51 KB, created by North West on 2010-03-16 00:38:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: North West

Created: 2010-03-16 00:38:06 UTC

Size: 26.51 KB

patch

obsolete

>Linux version 2.6.31-gentoo-r10_work (root@wn.ict.com) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #3 SMP PREEMPT Mon Mar 8 21:16:52 CST 2010
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
> BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
> BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
> BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x7f5e0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CAFFF write-protect
>  CB000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F800000 mask FFF800000 uncachable
>  2 base 07F700000 mask FFFF00000 uncachable
>  3 base 07F600000 mask FFFF00000 write-through
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000f70a0 00014 (v00 GBT   )
>ACPI: RSDT 7f5e3040 00034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 7f5e30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 7f5e3180 0539F (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
>ACPI: FACS 7f5e0000 00040
>ACPI: HPET 7f5e8680 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 7f5e8700 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: APIC 7f5e8580 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>1149MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00008000 - 0000ef00
>(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0001000000 - 00015695cc]    TEXT DATA BSS ==> [0001000000 - 00015695cc]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [000156a000 - 00015700f6]              BRK ==> [000156a000 - 00015700f6]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>found SMP MP-table at [c00f56f0] f56f0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007f5e0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f5e0
>On node 0 totalpages: 521599
>free_area_init_node: node 0, pgdat c1465e40, node_mem_map c1571000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2300 pages used for memmap
>  HighMem zone: 292070 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>4 Processors exceeds NR_CPUS limit of 2
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 7f600000 (gap: 7f600000:50a00000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages at c256b000, static data 32668 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517523
>Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.31-gentoo-r10_work root=/dev/sda6 i915.modeset=1 ro
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0007f5e0)
>Memory: 2062608k/2086784k available (2821k kernel code, 22856k reserved, 1709k data, 332k init, 1177480k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc146d000 - 0xc14c0000   ( 332 kB)
>      .data : 0xc12c143c - 0xc146c8f4   (1709 kB)
>      .text : 0xc1000000 - 0xc12c143c   (2821 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>NR_IRQS:320
>Fast TSC calibration using PIT
>Detected 2200.019 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.03 BogoMIPS (lpj=2200019)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Counters: Core2 events, Intel PMU driver.
>... version:                 2
>... bit width:               40
>... generic counters:        2
>... value mask:              000000ffffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  3
>... counter mask:            0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4399.68 BogoMIPS (lpj=2199843)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8799.72 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255
>PCI: MCFG area at d0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xf2200000-0xf227ffff]
>pci 0000:00:02.0: reg 14 io port: [0xe200-0xe207]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xf2100000-0xf21fffff]
>pci 0000:00:1a.0: reg 20 io port: [0xe300-0xe31f]
>pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
>pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2284000-0xf22843ff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2280000-0xf2283fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
>pci 0000:00:1d.1: reg 20 io port: [0xe500-0xe51f]
>pci 0000:00:1d.2: reg 20 io port: [0xe600-0xe61f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2285000-0xf22853ff]
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
>pci 0000:00:1f.2: reg 24 io port: [0xfc00-0xfc0f]
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2286000-0xf22860ff]
>pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
>pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe807]
>pci 0000:00:1f.5: reg 14 io port: [0xe900-0xe903]
>pci 0000:00:1f.5: reg 18 io port: [0xea00-0xea07]
>pci 0000:00:1f.5: reg 1c io port: [0xeb00-0xeb03]
>pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f]
>pci 0000:00:1f.5: reg 24 io port: [0xed00-0xed0f]
>pci 0000:00:1c.0: bridge io port: [0xa000-0xafff]
>pci 0000:02:00.0: reg 24 32bit mmio: [0xf2000000-0xf2001fff]
>pci 0000:02:00.0: PME# supported from D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.1: reg 10 io port: [0xc000-0xc007]
>pci 0000:02:00.1: reg 14 io port: [0xc100-0xc103]
>pci 0000:02:00.1: reg 18 io port: [0xc200-0xc207]
>pci 0000:02:00.1: reg 1c io port: [0xc300-0xc303]
>pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
>pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xf2000000-0xf20fffff]
>pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
>pci 0000:03:00.0: reg 18 64bit mmio: [0xf1000000-0xf1000fff]
>pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.4: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x290-0x29f has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:0b: ioport range 0x400-0x4bf could not be reserved
>system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved
>system 00:0d: iomem range 0xcd000-0xcffff has been reserved
>system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0d: iomem range 0x7f5e0000-0x7f5fffff could not be reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0x100000-0x7f5dffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0d: iomem range 0xfed10000-0xfed1dfff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
>system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:0d: iomem range 0xe0000-0xeffff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: 0xa000-0xafff
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.3:   MEM window: 0xf2000000-0xf20fffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.4:   MEM window: 0xf0000000-0xf1ffffff
>pci 0000:00:1c.4:   PREFETCH window: 0x80000000-0x800fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf20fffff]
>pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf1ffffff]
>pci_bus 0000:03: resource 2 pref mem [0x80000000-0x800fffff]
>pci_bus 0000:04: resource 0 io:  [0xb000-0xbfff]
>pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
>microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>msgmni has been set to 1730
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G33 Chipset
>agpgart-intel 0000:00:00.0: detected 7164K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>processor LNXCPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>jmicron 0000:02:00.1: IDE controller (0x197b:0x2363 rev 0x02)
>JMicron IDE 0000:02:00.1: enabling device (0000 -> 0001)
>JMicron IDE 0000:02:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>jmicron 0000:02:00.1: 100% native mode on irq 16
>JMicron IDE 0000:02:00.1: setting latency timer to 64
>    ide0: BM-DMA at 0xc400-0xc407
>    ide1: BM-DMA at 0xc408-0xc40f
>Probing IDE interface ide0...
>hda: ST3160212A, ATA DISK drive
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>ide0 at 0xc000-0xc007,0xc102 on irq 16
>ide1 at 0xc200-0xc207,0xc302 on irq 16
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>hda: max request size: 512KiB
>hda: Host Protected Area detected.
>	current capacity is 312579695 sectors (160040 MB)
>	native  capacity is 312581808 sectors (160041 MB)
>hda: 312579695 sectors (160040 MB) w/2048KiB Cache, CHS=19457/255/63
>hda: cache flushes supported
> hda: hda1 < hda5 >
>ide-cd driver 5.00
>3ware Storage Controller device driver for Linux v1.26.02.002.
>ahci 0000:02:00.0: version 3.0
>ahci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:02:00.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>ata1: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000100 irq 19
>ata2: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000180 irq 19
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
>ata6: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
>Fusion MPT base driver 3.04.10
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.10
>ieee1394: raw1394: /dev/raw1394 device initialized
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>oprofile: using NMI interrupt.
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>ata2: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: HPA detected: current 488395055, native 488397168
>ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133
>ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata4.00: SATA link down (SStatus 0 SControl 300)
>ata4.01: SATA link down (SStatus 0 SControl 300)
>ata3.00: SATA link down (SStatus 0 SControl 300)
>ata3.01: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
>Freeing unused kernel memory: 332k freed
>udev: starting version 149
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e300
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e500
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e600
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf2284000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2285000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:03:00.0: setting latency timer to 64
>r8169 0000:03:00.0: irq 24 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xf829e000, 00:1a:4d:5e:d0:02, XID 38000000 IRQ 24
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>[drm] Initialized drm 1.1.0 20060810
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 25 for MSI/MSI-X
>usb 1-2: configuration #1 chosen from 1 choice
>input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input3
>generic-usb 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-2/input0
>fbcon: inteldrmfb (fb0) is primary device
>[drm] DAC-6: set mode 1280x1024 17
>Console: switching to colour frame buffer device 160x64
>[drm] fb0: inteldrmfb frame buffer device
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>EXT3 FS on sda6, internal journal
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x478 offMax=0xef4
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>Adding 979924k swap on /dev/sda5.  Priority:1 extents:1 across:979924k 
>r8169: eth0: link up
>r8169: eth0: link up
>eth0: no IPv6 routers present
>warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)

Actions: View

Attachments on bug 27099: 34098 | 34099 | 34100

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.