Attachment 33964 Details for Bug 27024 – dmesg with drm.debug=6

dmesg with drm.debug=6

dmesg.out (text/plain), 46.84 KB, created by Frank Thieme on 2010-03-11 11:40:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Thieme

Created: 2010-03-11 11:40:13 UTC

Size: 46.84 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.31-20-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 (Ubuntu 2.6.31-20.57-generic)
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-20-generic root=UUID=d2722cbe-935c-4d0a-a257-de3c10820137 ro quiet splash drm.debug=6
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
>[    0.000000]  BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.2 present.
>[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] last_pfn = 0x7f7f0 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C9FFF write-protect
>[    0.000000]   CA000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-through
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] Scanning 0 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
>[    0.000000]  modified: 0000000000010000 - 000000000009f000 (usable)
>[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 000000007f7f0000 (usable)
>[    0.000000]  modified: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
>[    0.000000]  modified: 000000007f7f3000 - 000000007f800000 (ACPI data)
>[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
>[    0.000000] initial memory mapped : 0 - 20000000
>[    0.000000] init_memory_mapping: 0000000000000000-000000007f7f0000
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000]  0000000000 - 007f600000 page 2M
>[    0.000000]  007f600000 - 007f7f0000 page 4k
>[    0.000000] kernel direct mapping tables up to 7f7f0000 @ 10000-14000
>[    0.000000] RAMDISK: 37871000 - 37fefb5f
>[    0.000000] ACPI: RSDP 00000000000f7980 00014 (v00 FIC   )
>[    0.000000] ACPI: RSDT 000000007f7f3040 00030 (v01 FIC    P4M915G  42302E31 AWRD 00000000)
>[    0.000000] ACPI: FACP 000000007f7f30c0 00074 (v01 FIC    P4M915G  42302E31 AWRD 00000000)
>[    0.000000] ACPI: DSDT 000000007f7f3180 043D8 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
>[    0.000000] ACPI: FACS 000000007f7f0000 00040
>[    0.000000] ACPI: MCFG 000000007f7f76c0 0003C (v01 FIC    P4M915G  42302E31 AWRD 00000000)
>[    0.000000] ACPI: APIC 000000007f7f75c0 00084 (v01 FIC    P4M915G  42302E31 AWRD 00000000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-000000007f7f0000
>[    0.000000] Bootmem setup node 0 0000000000000000-000000007f7f0000
>[    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
>[    0.000000]   bootmap [0000000000017000 -  0000000000026eff] pages 10
>[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f7f0000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>[    0.000000]   #2 [0001000000 - 00019e8c8c]    TEXT DATA BSS ==> [0001000000 - 00019e8c8c]
>[    0.000000]   #3 [0037871000 - 0037fefb5f]          RAMDISK ==> [0037871000 - 0037fefb5f]
>[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>[    0.000000]   #5 [00019e9000 - 00019e90d6]              BRK ==> [00019e9000 - 00019e90d6]
>[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>[    0.000000] found SMP MP-table at [ffff8800000f38b0] f38b0
>[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x00100000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0007f7f0
>[    0.000000] On node 0 totalpages: 522111
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 102 pages reserved
>[    0.000000]   DMA zone: 3825 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7084 pages used for memmap
>[    0.000000]   DMA32 zone: 511044 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 24
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000)
>[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 30 pages at ffff8800019fa000, static data 90720 bytes
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514869
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-20-generic root=UUID=d2722cbe-935c-4d0a-a257-de3c10820137 ro quiet splash drm.debug=6
>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 2041308k/2088896k available (5328k kernel code, 452k absent, 47136k reserved, 3013k data, 664k init)
>[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] NR_IRQS:4352 nr_irqs:440
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 2793.416 MHz processor.
>[    0.001187] Console: colour VGA+ 80x25
>[    0.001192] console [tty0] enabled
>[    0.010000] allocated 20971520 bytes of page_cgroup
>[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.83 BogoMIPS (lpj=27934160)
>[    0.010048] Security Framework initialized
>[    0.010077] AppArmor: AppArmor initialized
>[    0.010409] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.012224] Mount-cache hash table entries: 256
>[    0.012425] Initializing cgroup subsys ns
>[    0.012433] Initializing cgroup subsys cpuacct
>[    0.012440] Initializing cgroup subsys memory
>[    0.012449] Initializing cgroup subsys freezer
>[    0.012452] Initializing cgroup subsys net_cls
>[    0.012474] CPU: Trace cache: 12K uops, L1 D cache: 16K
>[    0.012478] CPU: L2 cache: 1024K
>[    0.012482] CPU 0/0x0 -> Node 0
>[    0.012485] CPU: Physical Processor ID: 0
>[    0.012488] CPU: Processor Core ID: 0
>[    0.012491] mce: CPU supports 4 MCE banks
>[    0.012505] CPU0: Thermal monitoring enabled (TM1)
>[    0.012511] using mwait in idle threads.
>[    0.012513] Performance Counters: no PMU driver, software counters only.
>[    0.015554] ACPI: Core revision 20090521
>[    0.029027] Setting APIC routing to flat
>[    0.029350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.129395] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>[    0.130000] Booting processor 1 APIC 0x1 ip 0x6000
>[    0.010000] Initializing CPU#1
>[    0.010000] Calibrating delay using timer specific routine.. 5586.10 BogoMIPS (lpj=27930543)
>[    0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K
>[    0.010000] CPU: L2 cache: 1024K
>[    0.010000] CPU 1/0x1 -> Node 0
>[    0.010000] CPU: Physical Processor ID: 0
>[    0.010000] CPU: Processor Core ID: 0
>[    0.010000] mce: CPU supports 4 MCE banks
>[    0.010000] CPU1: Thermal monitoring enabled (TM1)
>[    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>[    0.280990] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>[    0.281007] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[    0.290025] Brought up 2 CPUs
>[    0.290030] Total of 2 processors activated (11172.94 BogoMIPS).
>[    0.290085] CPU0 attaching sched-domain:
>[    0.290089]  domain 0: span 0-1 level SIBLING
>[    0.290093]   groups: 0 1
>[    0.290102] CPU1 attaching sched-domain:
>[    0.290105]  domain 0: span 0-1 level SIBLING
>[    0.290108]   groups: 1 0
>[    0.290210] Booting paravirtualized kernel on bare hardware
>[    0.290228] regulator: core version 0.5
>[    0.290228] Time: 19:34:39  Date: 03/11/10
>[    0.290228] NET: Registered protocol family 16
>[    0.290305] ACPI: bus type pci registered
>[    0.290398] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>[    0.290402] PCI: MCFG area at e0000000 reserved in E820
>[    0.294141] PCI: Using MMCONFIG at e0000000 - efffffff
>[    0.294144] PCI: Using configuration type 1 for base access
>[    0.295406] bio: create slab <bio-0> at 0
>[    0.295406] ACPI: EC: Look up EC in DSDT
>[    0.305849] ACPI: Interpreter enabled
>[    0.305855] ACPI: (supports S0 S3 S4 S5)
>[    0.305890] ACPI: Using IOAPIC for interrupt routing
>[    0.312127] ACPI: No dock devices found.
>[    0.312273] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.312395] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
>[    0.312402] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
>[    0.312409] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
>[    0.312415] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
>[    0.312459] pci 0000:00:02.1: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
>[    0.312564] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
>[    0.312613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.312618] pci 0000:00:1b.0: PME# disabled
>[    0.312669] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
>[    0.312726] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
>[    0.312783] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
>[    0.312839] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
>[    0.312894] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
>[    0.312947] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.312952] pci 0000:00:1d.7: PME# disabled
>[    0.313075] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>[    0.313083] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>[    0.313089] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>[    0.313093] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
>[    0.313098] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
>[    0.313126] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>[    0.313134] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>[    0.313142] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>[    0.313150] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>[    0.313158] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f]
>[    0.313209] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]
>[    0.313216] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]
>[    0.313223] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]
>[    0.313230] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]
>[    0.313237] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f]
>[    0.313265] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.313270] pci 0000:00:1f.2: PME# disabled
>[    0.313321] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
>[    0.313399] pci 0000:01:05.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff]
>[    0.313408] pci 0000:01:05.0: reg 14 io port: [0xef00-0xef7f]
>[    0.313458] pci 0000:01:05.0: supports D2
>[    0.313461] pci 0000:01:05.0: PME# supported from D2 D3hot D3cold
>[    0.313466] pci 0000:01:05.0: PME# disabled
>[    0.313505] pci 0000:01:06.0: reg 10 io port: [0xec00-0xecff]
>[    0.313514] pci 0000:01:06.0: reg 14 32bit mmio: [0xfddfe000-0xfddfe0ff]
>[    0.313544] pci 0000:01:06.0: reg 30 32bit mmio: [0x000000-0x00ffff]
>[    0.313566] pci 0000:01:06.0: supports D1 D2
>[    0.313569] pci 0000:01:06.0: PME# supported from D1 D2 D3hot D3cold
>[    0.313574] pci 0000:01:06.0: PME# disabled
>[    0.313620] pci 0000:00:1e.0: transparent bridge
>[    0.313625] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
>[    0.313630] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
>[    0.313638] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
>[    0.313652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.313839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>[    0.327985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>[    0.328136] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>[    0.328288] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>[    0.328434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
>[    0.328580] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.328728] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.328873] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.329018] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>[    0.329293] SCSI subsystem initialized
>[    0.329347] libata version 3.00 loaded.
>[    0.329347] usbcore: registered new interface driver usbfs
>[    0.329347] usbcore: registered new interface driver hub
>[    0.329347] usbcore: registered new device driver usb
>[    0.329347] ACPI: WMI: Mapper loaded
>[    0.329347] PCI: Using ACPI for IRQ routing
>[    0.360014] Bluetooth: Core ver 2.15
>[    0.360037] NET: Registered protocol family 31
>[    0.360037] Bluetooth: HCI device and connection manager initialized
>[    0.360037] Bluetooth: HCI socket layer initialized
>[    0.360037] NetLabel: Initializing
>[    0.360037] NetLabel:  domain hash size = 128
>[    0.360037] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.360052] NetLabel:  unlabeled traffic allowed by default
>[    0.360200] hpet clockevent registered
>[    0.360206] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.360215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.360222] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.400015] pnp: PnP ACPI init
>[    0.400041] ACPI: bus type pnp registered
>[    0.403389] pnp: PnP ACPI: found 11 devices
>[    0.403393] ACPI: ACPI bus type pnp unregistered
>[    0.403409] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>[    0.403413] system 00:01: ioport range 0x290-0x29f has been reserved
>[    0.403417] system 00:01: ioport range 0x800-0x805 has been reserved
>[    0.403421] system 00:01: ioport range 0x880-0x88f has been reserved
>[    0.403431] system 00:07: ioport range 0x400-0x4bf could not be reserved
>[    0.403440] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
>[    0.403450] system 00:0a: iomem range 0xcc000-0xcffff has been reserved
>[    0.403454] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
>[    0.403458] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
>[    0.403462] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>[    0.403466] system 00:0a: iomem range 0x7f7f0000-0x7f7fffff could not be reserved
>[    0.403470] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
>[    0.403474] system 00:0a: iomem range 0x100000-0x7f7effff could not be reserved
>[    0.403478] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>[    0.403482] system 00:0a: iomem range 0xfed13000-0xfed1dfff has been reserved
>[    0.403485] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
>[    0.403489] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>[    0.403493] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
>[    0.403497] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
>[    0.403501] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
>[    0.407958] AppArmor: AppArmor Filesystem Enabled
>[    0.407998] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>[    0.408003] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
>[    0.408010] pci 0000:00:1e.0:   MEM window: 0xfdd00000-0xfddfffff
>[    0.408016] pci 0000:00:1e.0:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
>[    0.408033] pci 0000:00:1e.0: setting latency timer to 64
>[    0.408039] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.408043] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>[    0.408047] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
>[    0.408050] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
>[    0.408053] pci_bus 0000:01: resource 2 pref mem [0xfdc00000-0xfdcfffff]
>[    0.408056] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>[    0.408059] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>[    0.408112] NET: Registered protocol family 2
>[    0.408320] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.409496] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>[    0.411982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.412575] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.412580] TCP reno registered
>[    0.412745] NET: Registered protocol family 1
>[    0.412840] Trying to unpack rootfs image as initramfs...
>[    0.651657] Freeing initrd memory: 7674k freed
>[    0.656587] Scanning for low memory corruption every 60 seconds
>[    0.656764] audit: initializing netlink socket (disabled)
>[    0.656784] type=2000 audit(1268336079.649:1): initialized
>[    0.665958] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.667910] VFS: Disk quotas dquot_6.5.2
>[    0.667995] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.668896] fuse init (API version 7.12)
>[    0.669009] msgmni has been set to 4001
>[    0.669316] alg: No test for stdrng (krng)
>[    0.669339] io scheduler noop registered
>[    0.669343] io scheduler anticipatory registered
>[    0.669345] io scheduler deadline registered
>[    0.669408] io scheduler cfq registered (default)
>[    0.669427] pci 0000:00:02.0: Boot video device
>[    0.669623] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.669659] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.669820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    0.669825] ACPI: Power Button [PWRF]
>[    0.669895] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    0.669899] ACPI: Power Button [PWRB]
>[    0.669980] fan PNP0C0B:00: registered as cooling_device0
>[    0.669987] ACPI: Fan [FAN] (on)
>[    0.670350] processor LNXCPU:00: registered as cooling_device1
>[    0.670403] processor LNXCPU:01: registered as cooling_device2
>[    0.674048] thermal LNXTHERM:01: registered as thermal_zone0
>[    0.674063] ACPI: Thermal Zone [THRM] (30 C)
>[    0.675524] Linux agpgart interface v0.103
>[    0.675537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.677152] brd: module loaded
>[    0.677759] loop: module loaded
>[    0.677871] input: Macintosh mouse button emulation as /devices/virtual/input/input2
>[    0.678104] ata_piix 0000:00:1f.1: version 2.13
>[    0.678128]   alloc irq_desc for 18 on node 0
>[    0.678133]   alloc kstat_irqs on node 0
>[    0.678148] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    0.678205] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    0.678295] scsi0 : ata_piix
>[    0.678435] scsi1 : ata_piix
>[    0.679384] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>[    0.679388] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>[    0.679497]   alloc irq_desc for 19 on node 0
>[    0.679501]   alloc kstat_irqs on node 0
>[    0.679509] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    0.679517] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>[    0.679573] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    0.679706] scsi2 : ata_piix
>[    0.679786] scsi3 : ata_piix
>[    0.680715] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
>[    0.680720] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
>[    0.681833] Fixed MDIO Bus: probed
>[    0.681885] PPP generic driver version 2.4.2
>[    0.682023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.682095]   alloc irq_desc for 23 on node 0
>[    0.682099]   alloc kstat_irqs on node 0
>[    0.682109] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    0.682136] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    0.682141] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    0.682194] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    0.686092] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>[    0.686110] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
>[    0.709963] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.710077] usb usb1: configuration #1 chosen from 1 choice
>[    0.710117] hub 1-0:1.0: USB hub found
>[    0.710127] hub 1-0:1.0: 8 ports detected
>[    0.710235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.710262] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.710395] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    0.710405] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    0.710410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.710457] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.710485] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
>[    0.710586] usb usb2: configuration #1 chosen from 1 choice
>[    0.710623] hub 2-0:1.0: USB hub found
>[    0.710641] hub 2-0:1.0: 2 ports detected
>[    0.710745] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    0.710754] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    0.710758] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.710801] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    0.710828] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
>[    0.710936] usb usb3: configuration #1 chosen from 1 choice
>[    0.710972] hub 3-0:1.0: USB hub found
>[    0.710981] hub 3-0:1.0: 2 ports detected
>[    0.711090] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    0.711098] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    0.711102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.711143] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    0.711181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
>[    0.711280] usb usb4: configuration #1 chosen from 1 choice
>[    0.711316] hub 4-0:1.0: USB hub found
>[    0.711325] hub 4-0:1.0: 2 ports detected
>[    0.711423]   alloc irq_desc for 16 on node 0
>[    0.711427]   alloc kstat_irqs on node 0
>[    0.711434] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>[    0.711441] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    0.711445] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    0.711499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    0.711534] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
>[    0.711633] usb usb5: configuration #1 chosen from 1 choice
>[    0.711672] hub 5-0:1.0: USB hub found
>[    0.711681] hub 5-0:1.0: 2 ports detected
>[    0.711824] PNP: No PS/2 controller found. Probing ports directly.
>[    0.861844] Switched to high resolution mode on CPU 1
>[    0.862452] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.01, max UDMA/66
>[    0.862511] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
>[    0.862517] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    0.869929] Switched to high resolution mode on CPU 0
>[    0.880336] ata3.00: configured for UDMA/133
>[    0.900264] ata1.00: configured for UDMA/66
>[    0.902381] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.01 PQ: 0 ANSI: 5
>[    0.905752] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    0.905757] Uniform CD-ROM driver Revision: 3.20
>[    0.905873] sr 0:0:0:0: Attached scsi CD-ROM sr0
>[    0.905940] sr 0:0:0:0: Attached scsi generic sg0 type 5
>[    0.906061] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>[    0.906230] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    0.906238] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    0.906321] sd 2:0:0:0: [sda] Write Protect is off
>[    0.906325] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.906375] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.906557]  sda: sda1 sda2 sda3
>[    0.936383] sd 2:0:0:0: [sda] Attached SCSI disk
>[    0.960515] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.960636] mice: PS/2 mouse device common for all mice
>[    0.960766] rtc_cmos 00:03: RTC can wake from S4
>[    0.960813] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    0.960840] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>[    0.961028] device-mapper: uevent: version 1.0.3
>[    0.961159] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>[    0.961270] device-mapper: multipath: version 1.1.0 loaded
>[    0.961275] device-mapper: multipath round-robin: version 1.0.0 loaded
>[    0.961509] cpuidle: using governor ladder
>[    0.961513] cpuidle: using governor menu
>[    0.962102] TCP cubic registered
>[    0.962282] NET: Registered protocol family 10
>[    0.962851] lo: Disabled Privacy Extensions
>[    0.963245] NET: Registered protocol family 17
>[    0.963272] Bluetooth: L2CAP ver 2.13
>[    0.963275] Bluetooth: L2CAP socket layer initialized
>[    0.963279] Bluetooth: SCO (Voice Link) ver 0.6
>[    0.963281] Bluetooth: SCO socket layer initialized
>[    0.963332] Bluetooth: RFCOMM TTY layer initialized
>[    0.963336] Bluetooth: RFCOMM socket layer initialized
>[    0.963339] Bluetooth: RFCOMM ver 1.11
>[    0.963477] PM: Resume from disk failed.
>[    0.963495] registered taskstats version 1
>[    0.963631]   Magic number: 2:851:596
>[    0.963724] rtc_cmos 00:03: setting system clock to 2010-03-11 19:34:40 UTC (1268336080)
>[    0.963728] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    0.963730] EDD information not available.
>[    0.963806] Freeing unused kernel memory: 664k freed
>[    0.964143] Write protecting the kernel read-only data: 7596k
>[    1.031323] usb 1-3: new high speed USB device using ehci_hcd and address 2
>[    1.111174] agpgart-intel 0000:00:00.0: Intel 915G Chipset
>[    1.111648] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>[    1.114977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    1.199371] usb 1-3: configuration #1 chosen from 1 choice
>[    1.228539] [drm] Initialized drm 1.1.0 20060810
>[    1.321921] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>[    1.324199] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.324208] i915 0000:00:02.0: setting latency timer to 64
>[    1.334108] usb 1-4: new high speed USB device using ehci_hcd and address 3
>[    1.334156] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
>[    1.334241] [i915_drv:i915_init_phys_hws], Enabled hardware status page
>[    1.339201] 8139too Fast Ethernet driver 0.9.28
>[    1.354858]   alloc irq_desc for 17 on node 0
>[    1.354872]   alloc kstat_irqs on node 0
>[    1.354889] ohci1394 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.355478] FDC 0 is a post-1991 82077
>[    1.433439] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[fddff000-fddff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[    1.491780] usb 1-4: configuration #1 chosen from 1 choice
>[    1.492777] 8139too 0000:01:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.493967] hub 1-4:1.0: USB hub found
>[    1.494354] hub 1-4:1.0: 4 ports detected
>[    1.494589] eth0: RealTek RTL8139 at 0xec00, 00:40:ca:97:14:f4, IRQ 18
>[    1.678236] [i915_sdvo:intel_sdvo_init], SDVOB device VID/DID: 02:43.00, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[    1.731270] usb 1-7: new high speed USB device using ehci_hcd and address 5
>[    1.896724] usb 1-7: configuration #1 chosen from 1 choice
>[    1.923928] Initializing USB Mass Storage driver...
>[    1.933841] scsi4 : SCSI emulation for USB Mass Storage devices
>[    1.941318] usbcore: registered new interface driver usb-storage
>[    1.941325] USB Mass Storage support registered.
>[    1.941488] usb-storage: device found at 5
>[    1.941492] usb-storage: waiting for device to settle before scanning
>[    1.992299] [i915_sdvo:intel_sdvo_init], SDVOC device VID/DID: 02:C2.01, clock range 25MHz - 166MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[    2.062969] [drm] DAC-6: set mode 640x480 0
>[    2.258790] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[    2.269097] i2c-adapter i2c-5: unable to read EDID block.
>[    2.269102] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[    2.291268] usb 4-2: new full speed USB device using uhci_hcd and address 2
>[    2.339691] [drm] DAC-6: set mode 640x480 0
>[    2.449680] i2c-adapter i2c-6: unable to read EDID block.
>[    2.449684] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[    2.449688] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes
>[    2.452532] [drm] fb0: inteldrmfb frame buffer device
>[    2.452544] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.469085] usb 4-2: configuration #1 chosen from 1 choice
>[    2.527527] render error detected, EIR: 0x00000010
>[    2.527531] page table error
>[    2.527534]   PGTBL_ER: 0x00000010
>[    2.527538] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
>[    2.527546] render error detected, EIR: 0x00000010
>[    2.527549] page table error
>[    2.527551]   PGTBL_ER: 0x00000010
>[    2.546790] [drm] TV-10: set mode 800x600 f
>[    2.760021] usb 5-2: new full speed USB device using uhci_hcd and address 2
>[    2.785360] Console: switching to colour frame buffer device 100x37
>[    2.830240] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca070305c6e7]
>[    2.965390] usb 5-2: configuration #1 chosen from 1 choice
>[    2.999353] usbcore: registered new interface driver hiddev
>[    3.031448] generic-usb 0003:1509:925D.0001: hiddev96,hidraw0: USB HID v1.10 Device [DM-140GINK Demo DM-140GINK Demo] on usb-0000:00:1d.3-2/input0
>[    3.034467] input: DM-140GINK Demo DM-140GINK Demo as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input3
>[    3.034555] generic-usb 0003:1509:925D.0002: input,hidraw1: USB HID v1.10 Device [DM-140GINK Demo DM-140GINK Demo] on usb-0000:00:1d.3-2/input1
>[    3.034584] usbcore: registered new interface driver usbhid
>[    3.034589] usbhid: v2.6:USB HID core driver
>[    3.050210] usb 1-4.4: new low speed USB device using ehci_hcd and address 7
>[    3.154002] PM: Starting manual resume from disk
>[    3.154008] PM: Resume from partition 8:1
>[    3.154010] PM: Checking hibernation image.
>[    3.154199] PM: Resume from disk failed.
>[    3.163056] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>[    3.164610] SGI XFS Quota Management subsystem
>[    3.178405] usb 1-4.4: configuration #1 chosen from 1 choice
>[    3.186315] input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input4
>[    3.186430] generic-usb 0003:05AF:0319.0003: input,hidraw2: USB HID v1.10 Keyboard [2.4G USB RF KeyBoard] on usb-0000:00:1d.7-4.4/input0
>[    3.189915] input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1/input/input5
>[    3.190104] generic-usb 0003:05AF:0319.0004: input,hidraw3: USB HID v1.10 Mouse [2.4G USB RF KeyBoard] on usb-0000:00:1d.7-4.4/input1
>[    3.192952] XFS mounting filesystem sda3
>[    3.198007] input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.2/input/input6
>[    3.198164] generic-usb 0003:05AF:0319.0005: input,hiddev97,hidraw4: USB HID v1.10 Device [2.4G USB RF KeyBoard] on usb-0000:00:1d.7-4.4/input2
>[    3.258029] Ending clean XFS mount for filesystem: sda3
>[    3.845857] type=1505 audit(1268336083.376:2): operation="profile_load" pid=445 name=/usr/share/gdm/guest-session/Xsession
>[    3.853590] type=1505 audit(1268336083.386:3): operation="profile_load" pid=446 name=/sbin/dhclient3
>[    3.854364] type=1505 audit(1268336083.386:4): operation="profile_load" pid=446 name=/usr/lib/NetworkManager/nm-dhcp-client.action
>[    3.854788] type=1505 audit(1268336083.386:5): operation="profile_load" pid=446 name=/usr/lib/connman/scripts/dhclient-script
>[    3.914111] type=1505 audit(1268336083.446:6): operation="profile_load" pid=447 name=/usr/bin/evince
>[    3.926641] type=1505 audit(1268336083.456:7): operation="profile_load" pid=447 name=/usr/bin/evince-previewer
>[    3.934047] type=1505 audit(1268336083.466:8): operation="profile_load" pid=447 name=/usr/bin/evince-thumbnailer
>[    3.949532] type=1505 audit(1268336083.476:9): operation="profile_load" pid=449 name=/usr/lib/cups/backend/cups-pdf
>[    3.950449] type=1505 audit(1268336083.486:10): operation="profile_load" pid=449 name=/usr/sbin/cupsd
>[    6.941539] usb-storage: device scan complete
>[    6.945664] scsi 4:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  I19A PQ: 0 ANSI: 0 CCS
>[    6.949626] scsi 4:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  I19A PQ: 0 ANSI: 0 CCS
>[    6.953624] scsi 4:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  I19A PQ: 0 ANSI: 0 CCS
>[    6.957623] scsi 4:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  I19A PQ: 0 ANSI: 0 CCS
>[    6.958217] sd 4:0:0:0: Attached scsi generic sg2 type 0
>[    6.958339] sd 4:0:0:1: Attached scsi generic sg3 type 0
>[    6.958457] sd 4:0:0:2: Attached scsi generic sg4 type 0
>[    6.958573] sd 4:0:0:3: Attached scsi generic sg5 type 0
>[    6.962614] sd 4:0:0:0: [sdb] Attached SCSI removable disk
>[    6.963361] sd 4:0:0:1: [sdc] Attached SCSI removable disk
>[    6.964108] sd 4:0:0:3: [sde] Attached SCSI removable disk
>[    6.964856] sd 4:0:0:2: [sdd] Attached SCSI removable disk
>[   11.191888] Adding 2441872k swap on /dev/sda1.  Priority:-1 extents:1 across:2441872k 
>[   11.938035] udev: starting version 147
>[   12.402442] intel_rng: FWH not detected
>[   12.440828] lirc_dev: IR Remote Control driver registered, major 61 
>[   12.463408] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
>[   12.463416] lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
>[   12.510114] cfg80211: Calling CRDA to update world regulatory domain
>[   12.518727] lp: driver loaded but no devices found
>[   12.580040] usb 4-2: reset full speed USB device using uhci_hcd and address 2
>[   12.738439] lirc_dev: lirc_register_driver: sample_rate: 0
>[   12.743430] lirc_mceusb[2]: FIC eHome Infrared Transceiver on usb4:2
>[   12.743482] usbcore: registered new interface driver lirc_mceusb
>[   12.881277] usb 1-3: reset high speed USB device using ehci_hcd and address 2
>[   13.100294] cfg80211: World regulatory domain updated:
>[   13.100302] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   13.100309] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   13.100315] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   13.100321] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   13.100326] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   13.100332] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   13.323208] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   13.607786] phy0: Selected rate control algorithm 'minstrel'
>[   13.608650] zd1211rw 1-3:1.0: phy0
>[   13.608695] usbcore: registered new interface driver zd1211rw
>[   13.944433] RPC: Registered udp transport module.
>[   13.944438] RPC: Registered tcp transport module.
>[   14.639469] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   14.639515] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[   14.796066] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   15.070881] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
>[   16.963967] usb 1-3: firmware: requesting zd1211/zd1211b_ub
>[   17.175401] usb 1-3: firmware: requesting zd1211/zd1211b_uphr
>[   17.287583] zd1211rw 1-3:1.0: firmware version 4725
>[   17.327594] zd1211rw 1-3:1.0: zd1211b chip 0586:3410 v4810 high 00-19-cb AL2230_RF pa0 g--NS
>[   17.331196] cfg80211: Calling CRDA for country: DE
>[   17.335265] cfg80211: Regulatory domain changed to country: DE
>[   17.335274] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   17.335281] 	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   17.335285] 	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   17.335290] 	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[   17.382387] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   17.384694] eth0: link down
>[   17.385019] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   18.155168] __ratelimit: 9 callbacks suppressed
>[   18.155172] type=1505 audit(1268336097.687:14): operation="profile_replace" pid=1098 name=/usr/share/gdm/guest-session/Xsession
>[   18.157759] type=1505 audit(1268336097.687:15): operation="profile_replace" pid=1099 name=/sbin/dhclient3
>[   18.158531] type=1505 audit(1268336097.687:16): operation="profile_replace" pid=1099 name=/usr/lib/NetworkManager/nm-dhcp-client.action
>[   18.158955] type=1505 audit(1268336097.687:17): operation="profile_replace" pid=1099 name=/usr/lib/connman/scripts/dhclient-script
>[   18.164639] type=1505 audit(1268336097.697:18): operation="profile_replace" pid=1100 name=/usr/bin/evince
>[   18.177866] type=1505 audit(1268336097.707:19): operation="profile_replace" pid=1100 name=/usr/bin/evince-previewer
>[   18.185564] type=1505 audit(1268336097.717:20): operation="profile_replace" pid=1100 name=/usr/bin/evince-thumbnailer
>[   18.197110] type=1505 audit(1268336097.727:21): operation="profile_replace" pid=1102 name=/usr/lib/cups/backend/cups-pdf
>[   18.198012] type=1505 audit(1268336097.727:22): operation="profile_replace" pid=1102 name=/usr/sbin/cupsd
>[   18.201817] type=1505 audit(1268336097.737:23): operation="profile_replace" pid=1103 name=/usr/sbin/mysqld
>[   19.342057] [i915_drv:i915_driver_open], 
>[   19.375580] [i915_drv:i915_driver_open], 
>[   19.433942] [drm] DAC-6: set mode 640x480 0
>[   19.599977] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   19.612443] i2c-adapter i2c-5: unable to read EDID block.
>[   19.612451] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   19.670430] [drm] DAC-6: set mode 640x480 0
>[   19.747774] i2c-adapter i2c-6: unable to read EDID block.
>[   19.747785] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   19.806072] [drm] DAC-6: set mode 640x480 0
>[   20.108397] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   20.119173] i2c-adapter i2c-5: unable to read EDID block.
>[   20.119180] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   20.177548] [drm] DAC-6: set mode 640x480 0
>[   20.255154] i2c-adapter i2c-6: unable to read EDID block.
>[   20.255162] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   21.248696] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x0
>[   21.248707] platform microcode: firmware: requesting intel-ucode/0f-04-09
>[   21.257802] microcode: CPU1 sig=0xf49, pf=0x10, revision=0x0
>[   21.257812] platform microcode: firmware: requesting intel-ucode/0f-04-09
>[   21.268329] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   22.188018] microcode: CPU0 updated to revision 0x3, date = 2005-04-21 
>[   22.189937] microcode: CPU1 updated to revision 0x3, date = 2005-04-21 
>[   23.899588] __ratelimit: 6 callbacks suppressed
>[   23.899595] type=1503 audit(1268336103.426:26): operation="open" pid=1325 parent=1324 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   24.555451] type=1503 audit(1268336104.086:27): operation="open" pid=1361 parent=1360 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   25.243894] wlan0: authenticate with AP 00:18:39:86:e1:17
>[   25.245687] wlan0: authenticated
>[   25.245691] wlan0: associate with AP 00:18:39:86:e1:17
>[   25.247753] wlan0: RX AssocResp from 00:18:39:86:e1:17 (capab=0x411 status=0 aid=3)
>[   25.247757] wlan0: associated
>[   25.248958] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   25.427432] type=1503 audit(1268336104.956:28): operation="open" pid=1521 parent=1368 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   25.438210] Intel AES-NI instructions are not detected.
>[   25.693777] padlock: VIA PadLock not detected.
>[   25.763022] type=1503 audit(1268336105.296:29): operation="open" pid=1534 parent=1533 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   26.786300] type=1503 audit(1268336106.316:30): operation="open" pid=1555 parent=1554 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   27.838571] type=1503 audit(1268336107.367:31): operation="open" pid=1603 parent=1602 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   27.963120] type=1503 audit(1268336107.497:32): operation="open" pid=1616 parent=1615 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
>[   28.783337] [drm] DAC-6: set mode 640x480 0
>[   28.946499] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   28.957374] i2c-adapter i2c-5: unable to read EDID block.
>[   28.957385] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   29.015385] [drm] DAC-6: set mode 640x480 0
>[   29.093078] i2c-adapter i2c-6: unable to read EDID block.
>[   29.093089] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   29.156888] [drm] DAC-6: set mode 640x480 0
>[   29.203721] svc: failed to register lockdv1 RPC service (errno 97).
>[   29.238685] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>[   29.333996] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   29.344338] i2c-adapter i2c-5: unable to read EDID block.
>[   29.344345] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   29.402334] [drm] DAC-6: set mode 640x480 0
>[   29.475327] NFSD: starting 90-second grace period
>[   29.480203] i2c-adapter i2c-6: unable to read EDID block.
>[   29.480213] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   29.548942] [drm] DAC-6: set mode 640x480 0
>[   29.716812] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   29.727166] i2c-adapter i2c-5: unable to read EDID block.
>[   29.727172] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   29.785894] [drm] DAC-6: set mode 640x480 0
>[   29.866400] i2c-adapter i2c-6: unable to read EDID block.
>[   29.866409] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   30.668687] ppdev: user-space parallel port driver
>[   35.130047] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   36.110016] wlan0: no IPv6 routers present
>[   43.160024] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   49.807425] [drm] DAC-6: set mode 640x480 0
>[   49.970687] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   49.981328] i2c-adapter i2c-5: unable to read EDID block.
>[   49.981334] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   50.039406] [drm] DAC-6: set mode 640x480 0
>[   50.117165] i2c-adapter i2c-6: unable to read EDID block.
>[   50.117171] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   51.012694] [drm] DAC-6: set mode 640x480 0
>[   51.176828] [i915_sdvo:intel_sdvo_output_setup], SDVOC: Unknown SDVO output type (0x3e00)
>[   51.187708] i2c-adapter i2c-5: unable to read EDID block.
>[   51.187716] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   51.245824] [drm] DAC-6: set mode 640x480 0
>[   51.245874] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   51.323717] i2c-adapter i2c-6: unable to read EDID block.
>[   51.323725] i915 0000:00:02.0: SVIDEO-1: no EDID data
>[   59.130025] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   67.168235] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   75.167875] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   83.131354] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   91.170024] usb 1-7: reset high speed USB device using ehci_hcd and address 5
>[   91.361832] CPU0 attaching NULL sched-domain.
>[   91.361841] CPU1 attaching NULL sched-domain.
>[   91.400086] CPU0 attaching sched-domain:
>[   91.400093]  domain 0: span 0-1 level SIBLING
>[   91.400097]   groups: 0 1
>[   91.400104] CPU1 attaching sched-domain:
>[   91.400107]  domain 0: span 0-1 level SIBLING
>[   91.400110]   groups: 1 0

Actions: View

Attachments on bug 27024: 33964 | 33965 | 34008 | 34009 | 34010

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.