Attachment 33499 Details for Bug 25082 – dmesg output with drm.debug=0x06

dmesg output with drm.debug=0x06

dmesg (text/plain), 66.04 KB, created by Jürgen Geuter on 2010-02-22 14:02:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jürgen Geuter

Created: 2010-02-22 14:02:58 UTC

Size: 66.04 KB

patch

obsolete

>Linux version 2.6.32-tuxonice-r5 (root@yatahaze) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #1 SMP PREEMPT Fri Feb 19 22:24:37 CET 2010
>Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda1 rootfstype=ext4 doscsi acpi_sleep=s3_bios resume=swap:/dev/sda2 real_resume=/dev/sda2 tuxonice_resume=/dev/sda2 drm.debug=0x06
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
> BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
> BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
> BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>DMI present.
>last_pfn = 0x13c000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0C0000000 mask FC0000000 uncachable
>  1 base 13C000000 mask FFC000000 uncachable
>  2 base 000000000 mask F00000000 write-back
>  3 base 100000000 mask FC0000000 write-back
>  4 base 0BF700000 mask FFFF00000 uncachable
>  5 base 0BF800000 mask FFF800000 uncachable
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000bf6b0000
> 0000000000 - 00bf600000 page 2M
> 00bf600000 - 00bf6b0000 page 4k
>kernel direct mapping tables up to bf6b0000 @ 8000-d000
>init_memory_mapping: 0000000100000000-000000013c000000
> 0100000000 - 013c000000 page 2M
>kernel direct mapping tables up to 13c000000 @ b000-11000
>RAMDISK: 37e7b000 - 37fefd97
>ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
>ACPI: XSDT 00000000bf6bb77f 00094 (v01 LENOVO TP-7L    00002170  LTP 00000000)
>ACPI: FACP 00000000bf6bb900 000F4 (v03 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
>ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
>ACPI: DSDT 00000000bf6bbd1d 0FED1 (v01 LENOVO TP-7L    00002170 MSFT 03000000)
>ACPI: FACS 00000000bf6e4000 00040
>ACPI: SSDT 00000000bf6bbab4 00269 (v01 LENOVO TP-7L    00002170 MSFT 03000000)
>ACPI: ECDT 00000000bf6cbbee 00052 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI: TCPA 00000000bf6cbc40 00032 (v02 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI: APIC 00000000bf6cbc72 00068 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI: MCFG 00000000bf6cbcda 0003C (v01 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI: HPET 00000000bf6cbd16 00038 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
>ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L    00002170  LTP 00000000)
>ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L    00002170  LTP 00000001)
>ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L    00002170 PTL  00000001)
>ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L    00002170 INTL 20050513)
>ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L    00002170 INTL 20050513)
>ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L    00002170 INTL 20050513)
>ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L    00002170 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad T61
>ACPI: Added _OSI(Linux)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000013c000000
>Bootmem setup node 0 0000000000000000-000000013c000000
>  NODE_DATA [0000000000001000 - 0000000000004fff]
>  bootmap [000000000000c000 -  00000000000337ff] pages 28
>(8 early reservations) ==> bootmem [0000000000 - 013c000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 000175e8a4]    TEXT DATA BSS ==> [0001000000 - 000175e8a4]
>  #3 [0037e7b000 - 0037fefd97]          RAMDISK ==> [0037e7b000 - 0037fefd97]
>  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  #5 [000175f000 - 000175f14c]              BRK ==> [000175f000 - 000175f14c]
>  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>  #7 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
>found SMP MP-table at [ffff8800000f6900] f6900
> [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0013c000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009d
>    0: 0x00000100 -> 0x000bf6b0
>    0: 0x00100000 -> 0x0013c000
>On node 0 totalpages: 1029709
>  DMA zone: 56 pages used for memmap
>  DMA zone: 105 pages reserved
>  DMA zone: 3836 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 765672 pages, LIFO batch:31
>  Normal zone: 3360 pages used for memmap
>  Normal zone: 242400 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000
>PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000
>PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
>PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
>PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
>PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
>PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
>NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880028200000 s73944 r8192 d24360 u1048576
>pcpu-alloc: s73944 r8192 d24360 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011908
>Policy zone: Normal
>Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda1 rootfstype=ext4 doscsi acpi_sleep=s3_bios resume=swap:/dev/sda2 real_resume=/dev/sda2 tuxonice_resume=/dev/sda2 drm.debug=0x06
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 3986036k/5177344k available (3965k kernel code, 1058508k absent, 132800k reserved, 2458k data, 556k init)
>Hierarchical RCU implementation.
>NR_IRQS:512
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 1994.613 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.22 BogoMIPS (lpj=1994613)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20090903
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 363660 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (7979.04 BogoMIPS).
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query honored via DMI
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [PUBS] (on)
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
>pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff]
>pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff]
>pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
>pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f]
>pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
>pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
>pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
>pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
>pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
>pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
>pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
>pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff]
>pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
>pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
>pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
>pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff]
>pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff]
>pci 0000:15:00.0: supports D1 D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.0: PME# disabled
>pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff]
>pci 0000:15:00.1: supports D1 D2
>pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.1: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x7000-0xafff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xdc000000-0xdf3fffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
>pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
>pci 0000:00:1c.3:   MEM window: 0xd4000000-0xd5ffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000df800000-0x000000df8fffff
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.4:   IO window: 0x6000-0x6fff
>pci 0000:00:1c.4:   MEM window: 0xd0000000-0xd1ffffff
>pci 0000:00:1c.4:   PREFETCH window: 0x000000df500000-0x000000df5fffff
>pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
>pci 0000:15:00.0:   IO window: 0x007000-0x0070ff
>pci 0000:15:00.0:   IO window: 0x007400-0x0074ff
>pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
>pci 0000:15:00.0:   MEM window: 0xc0000000-0xc3ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
>pci 0000:00:1e.0:   IO window: 0x7000-0xafff
>pci 0000:00:1e.0:   MEM window: 0xf8300000-0xfbffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:15:00.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
>pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff]
>pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff]
>pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
>pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
>pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff]
>pci_bus 0000:05: resource 0 io:  [0x5000-0x5fff]
>pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff]
>pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff]
>pci_bus 0000:0d: resource 0 io:  [0x6000-0x6fff]
>pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff]
>pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff]
>pci_bus 0000:15: resource 0 io:  [0x7000-0xafff]
>pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff]
>pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff]
>pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:16: resource 0 io:  [0x7000-0x70ff]
>pci_bus 0000:16: resource 1 io:  [0x7400-0x74ff]
>pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff]
>pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 1491k freed
>Simple Boot Flag at 0x35 set to 0x1
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>msgmni has been set to 7788
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>lp: driver loaded but no devices found
>ppdev: user-space parallel port driver
>Linux agpgart interface v0.103
>uvesafb: failed to execute /sbin/v86d
>uvesafb: make sure that the v86d helper is installed and executable
>uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
>uvesafb: vbe_init() failed with -22
>uvesafb: probe of uvesafb.0 failed with error -22
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: SSDT 00000000bf6e1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
>ACPI: SSDT 00000000bf6e1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>processor LNXCPU:00: registered as cooling_device0
>ACPI: SSDT 00000000bf6e1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
>ACPI: SSDT 00000000bf6e1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
>processor LNXCPU:01: registered as cooling_device1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (81 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (78 C)
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
>pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>piix 0000:00:1f.1: IDE port disabled
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1c00-0x1c07
>Probing IDE interface ide0...
>ACPI: Battery Slot [BAT0] (battery present)
>hda: DVD/CDRW UJDA775, ATAPI CD/DVD-ROM drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 29
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 29
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>console [netcon0] enabled
>netconsole: network logging started
>Fusion MPT base driver 3.04.12
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.12
>usbcore: registered new interface driver usblp
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>TuxOnIce 3.0.99.44 (http://tuxonice.net)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: Hitachi HTS723232L9A360, FC4OC30F, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72323 FC4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>TuxOnIce: No image found.
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
>registered taskstats version 1
>rtc_cmos 00:07: setting system clock to 2010-02-22 22:53:36 UTC (1266879216)
>Freeing unused kernel memory: 556k freed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci1394 0000:15:00.1: setting latency timer to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8301000-f83017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a140815]
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  4144.000 MB/sec
>xor: using function: generic_sse (4144.000 MB/sec)
>raid6: int64x1   1785 MB/s
>raid6: int64x2   1914 MB/s
>raid6: int64x4    734 MB/s
>raid6: int64x8    449 MB/s
>raid6: sse2x1    1417 MB/s
>raid6: sse2x2    1554 MB/s
>raid6: sse2x4    2347 MB/s
>raid6: using algorithm sse2x4 (2347 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>JFS: nTxBlock = 8192, nTxLock = 65536
>fuse init (API version 7.13)
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>TuxOnIce: No image found.
>EXT3-fs: sda1: couldn't mount because of unsupported optional features (240).
>EXT2-fs: sda1: couldn't mount because of unsupported optional features (240).
>EXT4-fs (sda1): mounted filesystem with ordered data mode
>udev: starting version 151
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Non-volatile memory driver v1.3
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: EU
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: EU
>cfg80211: Calling CRDA for country: EU
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
>yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:15:00.0: Socket status: 30000006
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:d0:65:a2
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.LPC.EC for ec
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>thinkpad_acpi: ibm_init: probing for driver
>thinkpad_acpi: ThinkPad ACPI Extras v0.23
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
>thinkpad_acpi: Lenovo ThinkPad T61, model 765912G
>thinkpad_acpi: ibm_init: driver installed
>thinkpad_acpi: ibm_init: probing for hotkey
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
>thinkpad_acpi: ACPI backlight control delay disabled
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: hotkey_init: using Lenovo default hot key map
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.VID for vid
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>thinkpad_acpi: hotkey_init: enabling firmware HKEY event interface...
>thinkpad_acpi: hotkey_init: legacy ibm/hotkey event reporting over procfs enabled
>thinkpad_acpi: register_tpacpi_subdriver: registering hotkey as an ACPI driver
>thinkpad_acpi: ibm_init: hotkey installed
>thinkpad_acpi: ibm_init: probing for bluetooth
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
>thinkpad_acpi: ibm_init: bluetooth installed
>thinkpad_acpi: ibm_init: probing for wan
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
>thinkpad_acpi: wan_init: wan hardware not installed
>thinkpad_acpi: ibm_init: probing for video
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.VID for vid
>thinkpad_acpi: ibm_init: video installed
>thinkpad_acpi: ibm_init: probing for light
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos
>Registered led device: tpacpi::thinklight
>thinkpad_acpi: ibm_init: light installed
>thinkpad_acpi: ibm_init: probing for cmos
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos
>thinkpad_acpi: ibm_init: cmos installed
>thinkpad_acpi: ibm_init: probing for led
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle LED for led
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>Registered led device: tpacpi::thinkvantage
>thinkpad_acpi: ibm_init: led installed
>thinkpad_acpi: ibm_init: probing for beep
>thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle BEEP for beep
>thinkpad_acpi: ibm_init: beep installed
>thinkpad_acpi: ibm_init: probing for thermal
>thinkpad_acpi: ibm_init: thermal installed
>thinkpad_acpi: ibm_init: probing for brightness
>thinkpad_acpi: Backlight control force enabled, even if standard ACPI backlight interface is available
>thinkpad_acpi: detected a 16-level brightness capable ThinkPad
>thinkpad_acpi: ibm_init: brightness installed
>thinkpad_acpi: ibm_init: probing for volume
>thinkpad_acpi: ibm_init: volume installed
>thinkpad_acpi: ibm_init: probing for fan
>thinkpad_acpi: ibm_init: fan installed
>input: ThinkPad Extra Buttons as /devices/virtual/input/input6
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm:i915_init_phys_hws], Enabled hardware status page
>i915 0000:00:02.0: irq 31 for MSI/MSI-X
>[drm] set up 7M of stolen space
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 76770 1280 1332 1396 1568 800 803 806 816 0x8 0x0
>[drm:intel_setup_outputs], probing SDVOB
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
>iwlagn: Copyright(c) 2003-2009 Intel Corporation
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: setting latency timer to 64
>iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
>iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
>iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>[drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOC
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 7 enabled? yes
>[drm:drm_enable_connectors], connector 17 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 7
>[drm:drm_target_preferred], looking for preferred mode on connector 7
>[drm:drm_target_preferred], found mode 1280x800
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff880135869bc0 connectors: ffff88013a748ee0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 12:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm] LVDS-8: set mode 1280x800 c
>Console: switching to colour frame buffer device 160x50
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff880135869bc0 connectors: ffff88013a748ee0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>acpi device:01: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
>vboxdrv: counter framework which can generate NMIs is active. You have to prevent
>vboxdrv: the usage of hardware performance counters by
>vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa0327100
>vboxdrv: fAsync=1 offMin=0x58b06 offMax=0x58b06
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
>thinkpad_ec: thinkpad_ec 0.40 loaded.
>tp_smapi 0.40 loading...
>tp_smapi successfully loaded (smapi_port=0xb2).
>hdaps: LENOVO ThinkPad T61 detected, setting orientation 1
>hdaps: initial mode latch is 0x05
>hdaps: setting ec_rate=250, filter_order=2
>hdaps: device successfully initialized.
>input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input9
>input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input10
>hdaps: driver successfully loaded.
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>Adding 4096564k swap on /dev/sda2.  Priority:-1 extents:1 across:4096564k 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff880135869bc0 connectors: ffff88013a748ee0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>hda: UDMA/33 mode selected
>CE: hpet increasing min_delta_ns to 15000 nsec
>usb 3-1: USB disconnect, address 3
>btusb_intr_complete: hci0 urb ffff88013a5d6b00 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ffff88013a293e00 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ffff88013a293ec0 failed to resubmit (19)
>btusb_send_frame: hci0 urb ffff880136327540 submission failed
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff880135869bc0 connectors: ffff88013a748ee0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013711e800 3 fb: ffff880135869bc0 connectors: ffff88013a748ec0 num_connectors: 0 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff880135869bc0 connectors: ffff88013a748ee0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], Counted 2 3 3
>[drm:drm_mode_getresources], Counted 2 3 3
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff8801321ff500 connectors: ffff88013734ad20 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff8801321ff2c0 connectors: ffff88013734ad20 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
>iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
>Registered led device: iwl-phy0::radio
>Registered led device: iwl-phy0::assoc
>Registered led device: iwl-phy0::RX
>Registered led device: iwl-phy0::TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>CE: hpet increasing min_delta_ns to 22500 nsec
>wlan0: direct probe to AP 00:0f:66:cb:73:33 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:0f:66:cb:73:33 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:0f:66:cb:73:33 (try 1)
>wlan0: RX AssocResp from 00:0f:66:cb:73:33 (capab=0x431 status=0 aid=7)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>[drm:i915_driver_open], 
>Monitor-Mwait will be used to enter C-3 state
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>integrated sync not supported
>[drm:drm_helper_probe_single_connector_modes], Probed modes for VGA-1
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], LVDS-1
>[drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 76770 1280 1332 1396 1568 800 803 806 816 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 23:"1280x800" 50 63980 1280 1332 1396 1568 800 803 806 816 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 17:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 0 0
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013712d800 4 fb: ffff88012f2cf480 connectors: ffff88011d2b8ea0 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], crtc: ffff88013711e800 3 fb: ffff88012f2cf480 connectors: ffff88013734ad00 num_connectors: 1 (x, y) (1280, 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 15:"" 0 106500 1280 1360 1488 1696 800 803 809 838 0x0 0x6
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], setting connector 5 crtc to ffff88013711e800
>[drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013712d800
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 15:"" 0 106500 1280 1360 1488 1696 800 803 809 838 0x0 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 15:"" 0 106500 1280 1360 1488 1696 800 803 809 838 0x0 0x6
>[drm] DAC-6: set mode  f
>[drm:i915_driver_open],

Actions: View

Attachments on bug 25082: 31185 | 31186 | 31187 | 31188 | 31189 | 31190 | 33499

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.