Attachment 33276 Details for Bug 26556 – kernel output of the crashed Xorg session.

kernel output of the crashed Xorg session.

dmesg-crash (text/plain), 30.17 KB, created by A. Lew on 2010-02-13 08:52:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: A. Lew

Created: 2010-02-13 08:52:28 UTC

Size: 30.17 KB

patch

obsolete

>2] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @c3400000 s29336 r0 d23912 u1048576
>pcpu-alloc: s29336 r0 d23912 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842329
>Kernel command line: root=/dev/sda1 fastboot
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:000cf600)
>Memory: 3360392k/3397632k available (4143k kernel code, 34376k reserved, 1909k data, 336k init, 2486952k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff6a000 - 0xfffff000   ( 596 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc15ea000 - 0xc163e000   ( 336 kB)
>      .data : 0xc140be52 - 0xc15e9538   (1909 kB)
>      .text : 0xc1000000 - 0xc140be52   (4143 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Experimental preemptable hierarchical RCU implementation.
>NR_IRQS:384
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2393.835 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.67 BogoMIPS (lpj=2393835)
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>Booting Node   0, Processors  #1
>Initializing CPU#1
> #2
>Initializing CPU#2
> #3 Ok.
>Initializing CPU#3
>Brought up 4 CPUs
>Total of 4 processors activated (19534.00 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
>pci 0000:00:02.0: reg 10: [mem 0xe0380000-0xe03fffff]
>pci 0000:00:02.0: reg 14: [io  0x3430-0x3437]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xe0200000-0xe02fffff]
>pci 0000:00:02.1: reg 10: [mem 0xe0300000-0xe037ffff]
>pci 0000:00:03.0: reg 10: [mem 0xe0426100-0xe042610f 64bit]
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:19.0: reg 10: [mem 0xe0400000-0xe041ffff]
>pci 0000:00:19.0: reg 14: [mem 0xe0424000-0xe0424fff]
>pci 0000:00:19.0: reg 18: [io  0x3400-0x341f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 20: [io  0x30e0-0x30ff]
>pci 0000:00:1a.1: reg 20: [io  0x30c0-0x30df]
>pci 0000:00:1a.2: reg 20: [io  0x30a0-0x30bf]
>pci 0000:00:1a.7: reg 10: [mem 0xe0425c00-0xe0425fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xe0420000-0xe0423fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x3080-0x309f]
>pci 0000:00:1d.1: reg 20: [io  0x3060-0x307f]
>pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
>pci 0000:00:1d.7: reg 10: [mem 0xe0425800-0xe0425bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
>pci 0000:00:1f.2: reg 10: [io  0x3428-0x342f]
>pci 0000:00:1f.2: reg 14: [io  0x343c-0x343f]
>pci 0000:00:1f.2: reg 18: [io  0x3420-0x3427]
>pci 0000:00:1f.2: reg 1c: [io  0x3438-0x343b]
>pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
>pci 0000:00:1f.2: reg 24: [mem 0xe0425000-0xe04257ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xe0426000-0xe04260ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:03:00.0: reg 10: [io  0x2018-0x201f]
>pci 0000:03:00.0: reg 14: [io  0x2024-0x2027]
>pci 0000:03:00.0: reg 18: [io  0x2010-0x2017]
>pci 0000:03:00.0: reg 1c: [io  0x2020-0x2023]
>pci 0000:03:00.0: reg 20: [io  0x2000-0x200f]
>pci 0000:03:00.0: reg 24: [mem 0xe0100000-0xe01001ff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>pci 0000:03:00.0: PME# disabled
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0100000-0xe01fffff]
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.4: PCI bridge to [bus 05-05]
>pci 0000:06:00.0: reg 10: [io  0x1018-0x101f]
>pci 0000:06:00.0: reg 14: [io  0x1024-0x1027]
>pci 0000:06:00.0: reg 18: [io  0x1010-0x1017]
>pci 0000:06:00.0: reg 1c: [io  0x1020-0x1023]
>pci 0000:06:00.0: reg 20: [io  0x1000-0x100f]
>pci 0000:06:00.0: reg 24: [mem 0xe0000000-0xe0003fff]
>pci 0000:06:00.0: reg 30: [mem 0xffffc000-0xffffffff pref]
>pci 0000:06:00.0: supports D1
>pci 0000:06:03.0: reg 10: [mem 0xe0004000-0xe0004fff]
>pci 0000:06:03.0: supports D1 D2
>pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:06:03.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe00fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
>system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved
>system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
>system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved
>system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
>system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
>system 00:06: [io  0x0500-0x053f] has been reserved
>system 00:06: [io  0x0400-0x047f] has been reserved
>system 00:06: [io  0x0680-0x06ff] has been reserved
>pci 0000:06:00.0: address space collision: [mem 0xffffc000-0xffffffff pref] already in use
>pci 0000:00:1c.0: BAR 8: assigned [mem 0xe0500000-0xe06fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xe0700000-0xe08fffff 64bit pref]
>pci 0000:00:1c.1: BAR 8: assigned [mem 0xe0900000-0xe0afffff]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0xe0b00000-0xe0cfffff 64bit pref]
>pci 0000:00:1c.2: BAR 9: assigned [mem 0xe0d00000-0xe0efffff 64bit pref]
>pci 0000:00:1c.3: BAR 8: assigned [mem 0xe0f00000-0xe10fffff]
>pci 0000:00:1c.3: BAR 9: assigned [mem 0xe1100000-0xe12fffff 64bit pref]
>pci 0000:00:1c.4: BAR 8: assigned [mem 0xe1300000-0xe14fffff]
>pci 0000:00:1c.4: BAR 9: assigned [mem 0xe1500000-0xe16fffff 64bit pref]
>pci 0000:00:1e.0: BAR 9: assigned [mem 0xe1700000-0xe17fffff pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x4000-0x4fff]
>pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
>pci 0000:00:1c.3: BAR 7: assigned [io  0x6000-0x6fff]
>pci 0000:00:1c.4: BAR 7: assigned [io  0x7000-0x7fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe06fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xe0700000-0xe08fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xe0900000-0xe0afffff]
>pci 0000:00:1c.1:   bridge window [mem 0xe0b00000-0xe0cfffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0100000-0xe01fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0d00000-0xe0efffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0f00000-0xe10fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe1100000-0xe12fffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 05-05]
>pci 0000:00:1c.4:   bridge window [io  0x7000-0x7fff]
>pci 0000:00:1c.4:   bridge window [mem 0xe1300000-0xe14fffff]
>pci 0000:00:1c.4:   bridge window [mem 0xe1500000-0xe16fffff 64bit pref]
>pci 0000:06:00.0: BAR 6: assigned [mem 0xe1700000-0xe1703fff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 06-06]
>pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe00fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xe1700000-0xe17fffff pref]
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0000 -> 0003)
>pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: enabling device (0000 -> 0003)
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: enabling device (0000 -> 0003)
>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe06fffff]
>pci_bus 0000:01: resource 2 [mem 0xe0700000-0xe08fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:02: resource 1 [mem 0xe0900000-0xe0afffff]
>pci_bus 0000:02: resource 2 [mem 0xe0b00000-0xe0cfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:03: resource 1 [mem 0xe0100000-0xe01fffff]
>pci_bus 0000:03: resource 2 [mem 0xe0d00000-0xe0efffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:04: resource 1 [mem 0xe0f00000-0xe10fffff]
>pci_bus 0000:04: resource 2 [mem 0xe1100000-0xe12fffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0x7000-0x7fff]
>pci_bus 0000:05: resource 1 [mem 0xe1300000-0xe14fffff]
>pci_bus 0000:05: resource 2 [mem 0xe1500000-0xe16fffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:06: resource 1 [mem 0xe0000000-0xe00fffff]
>pci_bus 0000:06: resource 2 [mem 0xe1700000-0xe17fffff pref]
>pci_bus 0000:06: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
>microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
>microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
>microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.13)
>Btrfs loaded
>msgmni has been set to 1708
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Monitor-Mwait will be used to enter C-1 state
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G33 Chipset
>agpgart-intel 0000:00:00.0: detected 7164K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 29 for MSI/MSI-X
>[drm] set up 7M of stolen space
>[drm] initialized overlay support
>Console: switching to colour frame buffer device 240x75
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425100 irq 30
>ata2: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425180 irq 30
>ata3: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425200 irq 30
>ata4: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425280 irq 30
>ata5: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425300 irq 30
>ata6: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425380 irq 30
>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:27:c1:42
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0425c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0425800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ramzswap: num_devices not specified. Using default: 1
>ramzswap: Creating 1 devices ...
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ALSA device list:
>  #0: HDA Intel at 0xe0420000 irq 32
>ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata5.00: configured for UDMA/133
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: Attached scsi generic sg1 type 0
>IPv4 over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 17
>Bridge firewalling registered
>SCTP: Hash tables configured (established 65536 bind 65536)
> sdb:
> sda:
>Using IPI No-Shortcut mode
> sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>usb 1-6: new high speed USB device using ehci_hcd and address 2
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 336k freed
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2
>cherry 0003:046A:0023.0001: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.1-1/input0
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input3
>cherry 0003:046A:0023.0002: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.1-1/input1
>usb 8-1: new low speed USB device using uhci_hcd and address 2
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
>generic-usb 0003:046D:C00E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
>udev: starting version 150
>pata_pdc2027x 0000:06:00.0: version 1.0
>pata_pdc2027x 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>pata_marvell 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pata_marvell 0000:03:00.0: setting latency timer to 64
>scsi6 : pata_marvell
>scsi7 : pata_marvell
>ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 18
>ata8: DUMMY
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>pata_pdc2027x 0000:06:00.0: PLL input clock 16606 kHz
>scsi8 : pata_pdc2027x
>scsi9 : pata_pdc2027x
>ata9: PATA max UDMA/100 mmio m16384@0xe0000000 cmd 0xe00017c0 irq 21
>ata10: PATA max UDMA/100 mmio m16384@0xe0000000 cmd 0xe00015c0 irq 21
>ata7.01: ATAPI: HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
>ata7.01: configured for UDMA/33
>scsi 6:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:1:0: Attached scsi CD-ROM sr0
>sr 6:0:1:0: Attached scsi generic sg2 type 5
>ata9.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata9.00: 390721968 sectors, multi 16: LBA48 
>ata9.01: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata9.01: 390721968 sectors, multi 16: LBA48 
>ata9.00: configured for UDMA/100
>ata9.01: configured for UDMA/100
>scsi 8:0:0:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>sd 8:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>scsi 8:0:1:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:1:0: [sdd] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 8:0:1:0: Attached scsi generic sg4 type 0
> sdc:
>sd 8:0:1:0: [sdd] Write Protect is off
>sd 8:0:1:0: [sdd] Mode Sense: 00 3a 00 00
> sdc1
>sd 8:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:0:0: [sdc] Attached SCSI disk
> sdd: sdd1
>sd 8:0:1:0: [sdd] Attached SCSI disk
>ata10.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata10.00: 390721968 sectors, multi 16: LBA48 
>ata10.01: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata10.01: 390721968 sectors, multi 16: LBA48 
>ata10.00: configured for UDMA/100
>ata10.01: configured for UDMA/100
>scsi 9:0:0:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>sd 9:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 9:0:0:0: Attached scsi generic sg5 type 0
>sd 9:0:0:0: [sde] Write Protect is off
>sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 9:0:1:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>sd 9:0:1:0: [sdf] 390721968 512-byte logical blocks: (200 GB/186 GiB)
> sde:
>sd 9:0:1:0: Attached scsi generic sg6 type 0
> sde1
>sd 9:0:1:0: [sdf] Write Protect is off
>sd 9:0:1:0: [sdf] Mode Sense: 00 3a 00 00
>sd 9:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: sdf1
>sd 9:0:0:0: [sde] Attached SCSI disk
>sd 9:0:1:0: [sdf] Attached SCSI disk
>firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0
>firewire_core: created device fw0: GUID 0090270001f8d686, S400
>EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (sda1): using internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda3): using internal journal
>EXT3-fs (sda3): mounted filesystem with writeback data mode
>device label wiederherstellbar devid 1 transid 5642 /dev/sdc1
>btrfs: use compression
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>device eth0 entered promiscuous mode
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>0000:00:19.0: eth0: 10/100 speed: disabling TSO
>br0: port 1(eth0) entering forwarding state
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 411658 at 411656)

Actions: View

Attachments on bug 26556: 33273 | 33274 | 33275 | 33276

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.