Attachment 31786 Details for Bug 24538 – drm_debug=6

drm_debug=6

dmesg.drm_debug6.txt (text/plain), 66.51 KB, created by Greg Kroah-Hartman on 2009-12-06 15:06:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Greg Kroah-Hartman

Created: 2009-12-06 15:06:46 UTC

Size: 66.51 KB

patch

obsolete

>[    0.000000] Linux version 2.6.31.7-rc1-dirty (gregkh@mini) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #80 SMP Sun Dec 6 14:22:02 PST 2009
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   NSC Geode by NSC
>[    0.000000]   Cyrix CyrixInstead
>[    0.000000]   Centaur CentaurHauls
>[    0.000000]   Transmeta GenuineTMx86
>[    0.000000]   Transmeta TransmetaCPU
>[    0.000000]   UMC UMC UMC UMC
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007e0d5000 (usable)
>[    0.000000]  BIOS-e820: 000000007e0d5000 - 000000007e2d6000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007e2d6000 - 000000007eebf000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.4 present.
>[    0.000000] last_pfn = 0x7e0d5 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 07F000000 mask FFF000000 uncachable
>[    0.000000]   3 base 07EF00000 mask FFFF00000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] PAT not supported by CPU.
>[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
>[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
>[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
>[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000ede00 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 000000007e0d5000 (usable)
>[    0.000000]  modified: 000000007e0d5000 - 000000007e2d6000 (ACPI NVS)
>[    0.000000]  modified: 000000007e2d6000 - 000000007eebf000 (ACPI data)
>[    0.000000]  modified: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
>[    0.000000]  modified: 000000007eeef000 - 000000007ef00000 (ACPI data)
>[    0.000000]  modified: 000000007ef00000 - 0000000080000000 (reserved)
>[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
>[    0.000000] initial memory mapped : 0 - 01800000
>[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
>[    0.000000]  0000000000 - 0000400000 page 4k
>[    0.000000]  0000400000 - 0037400000 page 2M
>[    0.000000]  0037400000 - 00377fe000 page 4k
>[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
>[    0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
>[    0.000000] ACPI: XSDT 7eefd120 00074 (v01 APPLE   Apple00 00000055      01000013)
>[    0.000000] ACPI: FACP 7eefb000 000F4 (v03 APPLE   Apple00 00000055 Loki 0000005F)
>[    0.000000] ACPI: DSDT 7eef1000 0389A (v01 APPLE   Macmini 00010001 INTL 20050309)
>[    0.000000] ACPI: FACS 7eec1000 00040
>[    0.000000] ACPI: HPET 7eefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: APIC 7eef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: MCFG 7eef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ASF! 7eef7000 0009C (v32 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SBST 7eef6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ECDT 7eef5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SSDT 7eebd000 0064F (v01 APPLE   SataPri 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7eebc000 0069C (v01 APPLE   SataSec 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7eef0000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1128MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000]   node 0 low ram: 00000000 - 377fe000
>[    0.000000]   node 0 bootmap 00008000 - 0000ef00
>[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>[    0.000000]   #3 [0001000000 - 000161edb4]    TEXT DATA BSS ==> [0001000000 - 000161edb4]
>[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>[    0.000000]   #5 [000161f000 - 00016251f1]              BRK ==> [000161f000 - 00016251f1]
>[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x000377fe
>[    0.000000]   HighMem  0x000377fe -> 0x0007e0d5
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[3] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x00000002
>[    0.000000]     0: 0x00000006 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0007e0d5
>[    0.000000] On node 0 totalpages: 516208
>[    0.000000] free_area_init_node: node 0, pgdat c151a8c0, node_mem_map c1626000
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2258 pages used for memmap
>[    0.000000]   HighMem zone: 286725 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 24
>[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages at c25f8000, static data 35164 bytes
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512174
>[    0.000000] Kernel command line: root=/dev/sda3 vga=0x0305 netconsole=6665@192.168.0.14/eth0,6666@192.168.0.104/00:1F:29:AE:FC:95 drm_debug=6
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007e0d5)
>[    0.000000] Memory: 2040628k/2065236k available (3160k kernel code, 23428k reserved, 2104k data, 328k init, 1155932k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
>[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>[    0.000000]       .init : 0xc1525000 - 0xc1577000   ( 328 kB)
>[    0.000000]       .data : 0xc131628d - 0xc1524670   (2104 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc131628d   (3160 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] NR_IRQS:512
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Fast TSC calibration failed
>[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
>[    0.000000] Detected 1833.333 MHz processor.
>[    0.000037] Console: colour dummy device 80x25
>[    0.000040] console [tty0] enabled
>[    0.000532] hpet clockevent registered
>[    0.000537] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.000547] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.66 BogoMIPS (lpj=7333332)
>[    0.000575] Mount-cache hash table entries: 512
>[    0.000744] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.000750] CPU: L2 cache: 2048K
>[    0.000754] CPU: Physical Processor ID: 0
>[    0.000758] CPU: Processor Core ID: 0
>[    0.000763] mce: CPU supports 6 MCE banks
>[    0.000774] CPU0: Thermal monitoring enabled (TM2)
>[    0.000780] using mwait in idle threads.
>[    0.000790] Performance Counters: unsupported p6 CPU model 14 no PMU driver, software counters only.
>[    0.000799] Checking 'hlt' instruction... OK.
>[    0.016400] ACPI: Core revision 20090521
>[    0.028367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.068066] CPU0: Genuine Intel(R) CPU            1400  @ 1.83GHz stepping 08
>[    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
>[    0.004000] Initializing CPU#1
>[    0.004000] Calibrating delay using timer specific routine.. 3666.62 BogoMIPS (lpj=7333243)
>[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.004000] CPU: L2 cache: 2048K
>[    0.004000] CPU: Physical Processor ID: 0
>[    0.004000] CPU: Processor Core ID: 1
>[    0.004000] mce: CPU supports 6 MCE banks
>[    0.004000] CPU1: Thermal monitoring enabled (TM2)
>[    0.156466] CPU1: Genuine Intel(R) CPU            1400  @ 1.83GHz stepping 08
>[    0.156501] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[    0.160048] Brought up 2 CPUs
>[    0.160053] Total of 2 processors activated (7333.28 BogoMIPS).
>[    0.160112] CPU0 attaching sched-domain:
>[    0.160116]  domain 0: span 0-1 level MC
>[    0.160119]   groups: 0 1
>[    0.160124] CPU1 attaching sched-domain:
>[    0.160127]  domain 0: span 0-1 level MC
>[    0.160130]   groups: 1 0
>[    0.160204] NET: Registered protocol family 16
>[    0.160204] ACPI: bus type pci registered
>[    0.160204] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>[    0.160204] PCI: MCFG area at e0000000 reserved in E820
>[    0.160204] PCI: Using MMCONFIG for extended config space
>[    0.160204] PCI: Using configuration type 1 for base access
>[    0.164041] bio: create slab <bio-0> at 0
>[    0.164546] ACPI: EC: EC description table is found, configuring boot EC
>[    0.169187] ACPI: BIOS _OSI(Linux) query ignored
>[    0.172178] ACPI: Interpreter enabled
>[    0.172189] ACPI: (supports S0 S3 S5)
>[    0.172207] ACPI: Using IOAPIC for interrupt routing
>[    0.176426] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.176426] ACPI: EC: driver started in poll mode
>[    0.176426] ACPI: No dock devices found.
>[    0.177137] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.177171] pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff]
>[    0.177171] pci 0000:00:02.0: reg 14 io port: [0x20f0-0x20f7]
>[    0.177171] pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff]
>[    0.177171] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff]
>[    0.177171] pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff]
>[    0.177171] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff]
>[    0.177171] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.177171] pci 0000:00:1b.0: PME# disabled
>[    0.177171] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.177171] pci 0000:00:1c.0: PME# disabled
>[    0.177171] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.177171] pci 0000:00:1c.1: PME# disabled
>[    0.177171] pci 0000:00:1d.0: reg 20 io port: [0x20a0-0x20bf]
>[    0.177171] pci 0000:00:1d.1: reg 20 io port: [0x2080-0x209f]
>[    0.177171] pci 0000:00:1d.2: reg 20 io port: [0x2060-0x207f]
>[    0.177171] pci 0000:00:1d.3: reg 20 io port: [0x2040-0x205f]
>[    0.177171] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff]
>[    0.177171] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.177171] pci 0000:00:1d.7: PME# disabled
>[    0.177171] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>[    0.177171] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>[    0.177171] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
>[    0.177171] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>[    0.177171] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
>[    0.177171] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
>[    0.177171] pci 0000:00:1f.1: reg 10 io port: [0x20e8-0x20ef]
>[    0.177177] pci 0000:00:1f.1: reg 14 io port: [0x2104-0x2107]
>[    0.177186] pci 0000:00:1f.1: reg 18 io port: [0x20e0-0x20e7]
>[    0.177194] pci 0000:00:1f.1: reg 1c io port: [0x2100-0x2103]
>[    0.177203] pci 0000:00:1f.1: reg 20 io port: [0x20c0-0x20cf]
>[    0.177261] pci 0000:00:1f.2: reg 10 io port: [0x20d8-0x20df]
>[    0.177269] pci 0000:00:1f.2: reg 14 io port: [0x20fc-0x20ff]
>[    0.177278] pci 0000:00:1f.2: reg 18 io port: [0x20d0-0x20d7]
>[    0.177286] pci 0000:00:1f.2: reg 1c io port: [0x20f8-0x20fb]
>[    0.177295] pci 0000:00:1f.2: reg 20 io port: [0x2020-0x202f]
>[    0.177303] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff]
>[    0.177334] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.177341] pci 0000:00:1f.2: PME# disabled
>[    0.177405] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
>[    0.177516] pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
>[    0.177528] pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff]
>[    0.177563] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
>[    0.177617] pci 0000:01:00.0: supports D1 D2
>[    0.177620] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.177629] pci 0000:01:00.0: PME# disabled
>[    0.177667] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.180103] pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
>[    0.180108] pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
>[    0.180186] pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
>[    0.180317] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.180418] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
>[    0.180474] pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
>[    0.180536] pci 0000:03:03.0: supports D1 D2
>[    0.180538] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.180547] pci 0000:03:03.0: PME# disabled
>[    0.180604] pci 0000:00:1e.0: transparent bridge
>[    0.180614] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
>[    0.180641] pci_bus 0000:00: on NUMA node 0
>[    0.180646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.180870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.180953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.181054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.184334] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.184334] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.184334] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.184401] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.184504] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.188225] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.188332] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.188436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>[    0.188490] SCSI subsystem initialized
>[    0.188490] libata version 3.00 loaded.
>[    0.188490] usbcore: registered new interface driver usbfs
>[    0.188490] usbcore: registered new interface driver hub
>[    0.188490] usbcore: registered new device driver usb
>[    0.188490] PCI: Using ACPI for IRQ routing
>[    0.228007] pnp: PnP ACPI init
>[    0.228020] ACPI: bus type pnp registered
>[    0.229743] pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 (0x1000-0x1fff), disabling
>[    0.229930] pnp: PnP ACPI: found 10 devices
>[    0.229935] ACPI: ACPI bus type pnp unregistered
>[    0.229948] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>[    0.229955] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>[    0.229961] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>[    0.229968] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>[    0.229974] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>[    0.229981] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>[    0.229992] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
>[    0.230002] system 00:08: ioport range 0x680-0x6ef has been reserved
>[    0.230008] system 00:08: ioport range 0x800-0x80f has been reserved
>[    0.230014] system 00:08: ioport range 0x810-0x817 has been reserved
>[    0.230020] system 00:08: ioport range 0x400-0x47f has been reserved
>[    0.230026] system 00:08: ioport range 0x500-0x53f has been reserved
>[    0.265144] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
>[    0.265186] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>[    0.265193] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>[    0.265202] pci 0000:00:1c.0:   MEM window: 0x90200000-0x902fffff
>[    0.265211] pci 0000:00:1c.0:   PREFETCH window: 0x90500000-0x905fffff
>[    0.265219] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>[    0.265224] pci 0000:00:1c.1:   IO window: disabled
>[    0.265233] pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
>[    0.265240] pci 0000:00:1c.1:   PREFETCH window: disabled
>[    0.265248] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>[    0.265253] pci 0000:00:1e.0:   IO window: disabled
>[    0.265262] pci 0000:00:1e.0:   MEM window: 0x90000000-0x900fffff
>[    0.265269] pci 0000:00:1e.0:   PREFETCH window: disabled
>[    0.265288] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    0.265297] pci 0000:00:1c.0: setting latency timer to 64
>[    0.265307] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>[    0.265316] pci 0000:00:1c.1: setting latency timer to 64
>[    0.265377] pci 0000:00:1e.0: power state changed by ACPI to D0
>[    0.265387] pci 0000:00:1e.0: setting latency timer to 64
>[    0.265392] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.265396] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>[    0.265399] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
>[    0.265402] pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff]
>[    0.265406] pci_bus 0000:01: resource 2 pref mem [0x90500000-0x905fffff]
>[    0.265409] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
>[    0.265413] pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff]
>[    0.265416] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>[    0.265419] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
>[    0.265452] NET: Registered protocol family 2
>[    0.265541] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.265858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.266961] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.267554] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.267560] TCP reno registered
>[    0.267651] NET: Registered protocol family 1
>[    0.268832] cpu0(2) debug files 133
>[    0.270051] cpu1(2) debug files 133
>[    0.270361] Scanning for low memory corruption every 60 seconds
>[    0.270812] highmem bounce pool size: 64 pages
>[    0.270820] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.275143] msgmni has been set to 1729
>[    0.275498] alg: No test for stdrng (krng)
>[    0.275623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>[    0.275630] io scheduler noop registered
>[    0.275635] io scheduler anticipatory registered
>[    0.275639] io scheduler deadline registered
>[    0.275726] io scheduler cfq registered (default)
>[    0.275775] pci 0000:00:02.0: Boot video device
>[    0.275789] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.275792] pci 0000:00:1d.0: Performing full reset
>[    0.275811] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.275813] pci 0000:00:1d.1: Performing full reset
>[    0.275832] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.275835] pci 0000:00:1d.2: Performing full reset
>[    0.275853] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.275856] pci 0000:00:1d.3: Performing full reset
>[    0.276183] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>[    0.276195] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[    0.276454] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>[    0.276465] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[    0.276907] vesafb: framebuffer at 0x80000000, mapped to 0xf8080000, using 1536k, total 16064k
>[    0.276915] vesafb: mode is 1024x768x8, linelength=1024, pages=19
>[    0.276920] vesafb: scrolling: redraw
>[    0.276926] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>[    0.285106] Console: switching to colour frame buffer device 128x48
>[    0.293182] fb0: VESA VGA frame buffer device
>[    0.293465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    0.293575] ACPI: Power Button [PWRF]
>[    0.293726] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    0.293847] ACPI: Power Button [PWRB]
>[    0.294394] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input2
>[    0.294525] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.295135] ACPI: SSDT 7eebac90 0022A (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
>[    0.295577] ACPI: SSDT 7eeb9e10 001BA (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
>[    0.295957] Monitor-Mwait will be used to enter C-1 state
>[    0.295985] Monitor-Mwait will be used to enter C-2 state
>[    0.295992] Marking TSC unstable due to TSC halts in idle
>[    0.296100] Switched to high resolution mode on CPU 0
>[    0.296257] ACPI: CPU0 (power states: C1[C1] C2[C2])
>[    0.296402] processor LNXCPU:00: registered as cooling_device0
>[    0.296490] ACPI: Processor [CPU0] (supports
>[    0.296552] Switched to high resolution mode on CPU 1
>[    0.296559]  8 throttling states)
>[    0.296987] ACPI: SSDT 7eebaf10 00087 (v01 APPLE   Cpu1Ist 00003000 INTL 20050309)
>[    0.297375] ACPI: SSDT 7eeb8f10 00085 (v01 APPLE   Cpu1Cst 00003000 INTL 20050309)
>[    0.297887] ACPI: CPU1 (power states: C1[C1] C2[C2])
>[    0.298023] processor LNXCPU:01: registered as cooling_device1
>[    0.298112] ACPI: Processor [CPU1] (supports 8 throttling states)
>[    0.303114] Real Time Clock Driver v1.12b
>[    0.303229] Non-volatile memory driver v1.3
>[    0.303293] Linux agpgart interface v0.103
>[    0.303367] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>[    0.307355] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
>[    0.313538] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>[    0.316853] [drm] Initialized drm 1.1.0 20060810
>[    0.320024] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.323231] i915 0000:00:02.0: setting latency timer to 64
>[    0.689457] i2c-adapter i2c-2: unable to read EDID block.
>[    0.690373] i915 0000:00:02.0: DVI-D-1: no EDID data
>[    1.015061] i2c-adapter i2c-2: unable to read EDID block.
>[    1.015985] i915 0000:00:02.0: DVI-D-1: no EDID data
>[    1.376931] [drm] TV-10: set mode NTSC 480i 0
>[    1.519285] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    1.520367] [drm] fb1: inteldrmfb frame buffer device
>[    1.521308] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.524614] brd: module loaded
>[    1.525553] Uniform Multi-Platform E-IDE driver
>[    1.526687] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
>[    1.527675] PIIX_IDE 0000:00:1f.1: power state changed by ACPI to D0
>[    1.528627] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.529610] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>[    1.530572]     ide0: BM-DMA at 0x20c0-0x20c7
>[    1.531542]     ide1: BM-DMA at 0x20c8-0x20cf
>[    1.532481] Probing IDE interface ide0...
>[    2.268420] hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive
>[    2.604094] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[    2.604358] hda: UDMA/66 mode selected
>[    2.605572] Probing IDE interface ide1...
>[    3.172100] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[    3.173062] ide1 at 0x170-0x177,0x376 on irq 15
>[    3.174195] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>[    3.175138] ide-cd driver 5.00
>[    3.177152] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>[    3.178120] Uniform CD-ROM driver Revision: 3.20
>[    3.193022] ata_piix 0000:00:1f.2: version 2.13
>[    3.193035] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
>[    3.193978] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    3.194910] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>[    3.348020] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    3.348088] scsi0 : ata_piix
>[    3.349164] scsi1 : ata_piix
>[    3.351122] ata1: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19
>[    3.352047] ata2: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19
>[    3.353020] sky2 driver version 1.23
>[    3.353952] sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    3.354873] sky2 0000:01:00.0: setting latency timer to 64
>[    3.354899] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
>[    3.355920] sky2 0000:01:00.0: irq 26 for MSI/MSI-X
>[    3.356251] sky2 eth0: addr 00:16:cb:97:b9:60
>[    3.357201] tun: Universal TUN/TAP device driver, 1.6
>[    3.358114] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    3.359087] netconsole: local port 6665
>[    3.359995] netconsole: local IP 192.168.0.14
>[    3.360905] netconsole: interface eth0
>[    3.361787] netconsole: remote port 6666
>[    3.362667] netconsole: remote IP 192.168.0.104
>[    3.363543] netconsole: remote ethernet address 00:1f:29:ae:fc:95
>[    3.364435] netconsole: device eth0 not up yet, forcing it
>[    3.367344] sky2 eth0: enabling interface
>[    3.531803] ata1.01: ATA-7: FUJITSU MHV2080BHPL, 0081702E, max UDMA/100
>[    3.532697] ata1.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    3.548527] ata1.01: configured for UDMA/100
>[    3.549490] scsi 0:0:1:0: Direct-Access     ATA      FUJITSU MHV2080B 0081 PQ: 0 ANSI: 5
>[    3.550686] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    3.551588] sd 0:0:1:0: Attached scsi generic sg0 type 0
>[    3.552575] sd 0:0:1:0: [sda] Write Protect is off
>[    3.553473] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>[    3.553500] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.554533]  sda: sda1 sda2 sda3
>[    3.638182] sd 0:0:1:0: [sda] Attached SCSI disk
>[    6.556036] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[    6.568032] console [netcon0] enabled
>[    6.834124] netconsole: network logging started
>[    6.835126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    6.836037] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>[    6.836065] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    6.836972] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    6.836977] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    6.837942] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    6.838828] ehci_hcd 0000:00:1d.7: using broken periodic workaround
>[    6.839735] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>[    6.839741] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    6.839760] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    6.843652] ehci_hcd 0000:00:1d.7: debug port 1
>[    6.844555] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    6.844558] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    6.844572] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
>[    6.845461] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    6.849352] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    6.860014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    6.860930] usb usb1: default language 0x0409
>[    6.860939] usb usb1: udev 1, busnum 1, minor = 0
>[    6.860943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    6.861842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.862736] usb usb1: Product: EHCI Host Controller
>[    6.863597] usb usb1: Manufacturer: Linux 2.6.31.7-rc1-dirty ehci_hcd
>[    6.864481] usb usb1: SerialNumber: 0000:00:1d.7
>[    6.865366] usb usb1: uevent
>[    6.865412] usb usb1: usb_probe_device
>[    6.865415] usb usb1: configuration #1 chosen from 1 choice
>[    6.866281] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    6.866298] usb 1-0:1.0: uevent
>[    6.866343] hub 1-0:1.0: usb_probe_interface
>[    6.866346] hub 1-0:1.0: usb_probe_interface - got id
>[    6.866349] hub 1-0:1.0: USB hub found
>[    6.867197] hub 1-0:1.0: 8 ports detected
>[    6.868052] hub 1-0:1.0: standalone hub
>[    6.868054] hub 1-0:1.0: no power switching (usb 1.0)
>[    6.868057] hub 1-0:1.0: individual port over-current protection
>[    6.868060] hub 1-0:1.0: power on to power good time: 20ms
>[    6.868065] hub 1-0:1.0: local power source is good
>[    6.868068] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    6.868174] uhci_hcd: USB Universal Host Controller Interface driver
>[    6.869066] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    6.869935] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    6.869939] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    6.870850] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    6.871734] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    6.872600] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.872603] uhci_hcd 0000:00:1d.0: Performing full reset
>[    6.872619] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    6.872625] uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0
>[    6.873524] usb usb2: default language 0x0409
>[    6.873532] usb usb2: udev 1, busnum 2, minor = 128
>[    6.873535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.874388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.875253] usb usb2: Product: UHCI Host Controller
>[    6.876118] usb usb2: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.876985] usb usb2: SerialNumber: 0000:00:1d.0
>[    6.877867] usb usb2: uevent
>[    6.877911] usb usb2: usb_probe_device
>[    6.877915] usb usb2: configuration #1 chosen from 1 choice
>[    6.878792] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    6.878817] usb 2-0:1.0: uevent
>[    6.878862] hub 2-0:1.0: usb_probe_interface
>[    6.878865] hub 2-0:1.0: usb_probe_interface - got id
>[    6.878867] hub 2-0:1.0: USB hub found
>[    6.879733] hub 2-0:1.0: 2 ports detected
>[    6.880616] hub 2-0:1.0: standalone hub
>[    6.880618] hub 2-0:1.0: no power switching (usb 1.0)
>[    6.880620] hub 2-0:1.0: individual port over-current protection
>[    6.880623] hub 2-0:1.0: power on to power good time: 2ms
>[    6.880628] hub 2-0:1.0: local power source is good
>[    6.880631] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    6.880677] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    6.881569] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    6.881573] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    6.882530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    6.883429] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    6.884337] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.884340] uhci_hcd 0000:00:1d.1: Performing full reset
>[    6.884356] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    6.884362] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
>[    6.885277] usb usb3: default language 0x0409
>[    6.885286] usb usb3: udev 1, busnum 3, minor = 256
>[    6.885289] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.886189] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.887073] usb usb3: Product: UHCI Host Controller
>[    6.887953] usb usb3: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.888831] usb usb3: SerialNumber: 0000:00:1d.1
>[    6.889733] usb usb3: uevent
>[    6.889777] usb usb3: usb_probe_device
>[    6.889781] usb usb3: configuration #1 chosen from 1 choice
>[    6.890649] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    6.890669] usb 3-0:1.0: uevent
>[    6.890725] hub 3-0:1.0: usb_probe_interface
>[    6.890728] hub 3-0:1.0: usb_probe_interface - got id
>[    6.890730] hub 3-0:1.0: USB hub found
>[    6.891581] hub 3-0:1.0: 2 ports detected
>[    6.892415] hub 3-0:1.0: standalone hub
>[    6.892418] hub 3-0:1.0: no power switching (usb 1.0)
>[    6.892420] hub 3-0:1.0: individual port over-current protection
>[    6.892423] hub 3-0:1.0: power on to power good time: 2ms
>[    6.892428] hub 3-0:1.0: local power source is good
>[    6.892430] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    6.892475] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    6.893334] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    6.893338] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    6.894230] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    6.895076] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    6.895909] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.895911] uhci_hcd 0000:00:1d.2: Performing full reset
>[    6.895928] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    6.895942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
>[    6.896815] usb usb4: default language 0x0409
>[    6.896823] usb usb4: udev 1, busnum 4, minor = 384
>[    6.896826] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.897652] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.898488] usb usb4: Product: UHCI Host Controller
>[    6.899307] usb usb4: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.900151] usb usb4: SerialNumber: 0000:00:1d.2
>[    6.901009] usb usb4: uevent
>[    6.901053] usb usb4: usb_probe_device
>[    6.901056] usb usb4: configuration #1 chosen from 1 choice
>[    6.901906] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    6.901927] usb 4-0:1.0: uevent
>[    6.901972] hub 4-0:1.0: usb_probe_interface
>[    6.901974] hub 4-0:1.0: usb_probe_interface - got id
>[    6.901977] hub 4-0:1.0: USB hub found
>[    6.902811] hub 4-0:1.0: 2 ports detected
>[    6.903640] hub 4-0:1.0: standalone hub
>[    6.903643] hub 4-0:1.0: no power switching (usb 1.0)
>[    6.903645] hub 4-0:1.0: individual port over-current protection
>[    6.903648] hub 4-0:1.0: power on to power good time: 2ms
>[    6.903653] hub 4-0:1.0: local power source is good
>[    6.903655] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    6.903700] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>[    6.904555] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    6.904559] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    6.905464] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    6.906307] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    6.907149] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.907152] uhci_hcd 0000:00:1d.3: Performing full reset
>[    6.907169] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>[    6.907175] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
>[    6.908054] usb usb5: default language 0x0409
>[    6.908063] usb usb5: udev 1, busnum 5, minor = 512
>[    6.908066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.908911] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.909753] usb usb5: Product: UHCI Host Controller
>[    6.910596] usb usb5: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.911430] usb usb5: SerialNumber: 0000:00:1d.3
>[    6.912315] usb usb5: uevent
>[    6.912359] usb usb5: usb_probe_device
>[    6.912362] usb usb5: configuration #1 chosen from 1 choice
>[    6.913204] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    6.913227] usb 5-0:1.0: uevent
>[    6.913283] hub 5-0:1.0: usb_probe_interface
>[    6.913285] hub 5-0:1.0: usb_probe_interface - got id
>[    6.913288] hub 5-0:1.0: USB hub found
>[    6.914121] hub 5-0:1.0: 2 ports detected
>[    6.914947] hub 5-0:1.0: standalone hub
>[    6.914949] hub 5-0:1.0: no power switching (usb 1.0)
>[    6.914951] hub 5-0:1.0: individual port over-current protection
>[    6.914954] hub 5-0:1.0: power on to power good time: 2ms
>[    6.914959] hub 5-0:1.0: local power source is good
>[    6.914961] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    6.915110] usbcore: registered new interface driver libusual
>[    6.916146] PNP: No PS/2 controller found. Probing ports directly.
>[    6.917876] i8042.c: No controller found.
>[    6.918774] mice: PS/2 mouse device common for all mice
>[    6.920226] cpuidle: using governor ladder
>[    6.921542] cpuidle: using governor menu
>[    6.923934] usbcore: registered new interface driver usbhid
>[    6.924773] usbhid: v2.6:USB HID core driver
>[    6.925676] Advanced Linux Sound Architecture Driver Version 1.0.20.
>[    6.927051] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    6.927930] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    6.968050] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
>[    6.968058] hub 1-0:1.0: port 3: status 0501 change 0001
>[    6.968077] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>[    6.968085] hub 1-0:1.0: port 5: status 0501 change 0001
>[    6.968100] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>[    6.968107] hub 1-0:1.0: port 6: status 0501 change 0001
>[    6.968122] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>[    6.968130] hub 1-0:1.0: port 7: status 0501 change 0001
>[    6.968145] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
>[    6.968152] hub 1-0:1.0: port 8: status 0501 change 0001
>[    6.980066] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    6.988098] hda_codec: STAC922x, Apple subsys_id=106b0800
>[    6.992041] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
>[    6.996562] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
>[    6.997585] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
>[    6.999633] ALSA device list:
>[    7.000519]   #0: HDA Intel at 0x90440000 irq 22
>[    7.001404] uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
>[    7.001423] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
>[    7.001821] TCP cubic registered
>[    7.002684] Initializing XFRM netlink socket
>[    7.003555] NET: Registered protocol family 17
>[    7.004456] Using IPI No-Shortcut mode
>[    7.005512] registered taskstats version 1
>[    7.012040] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
>[    7.012062] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[    7.068060] hub 1-0:1.0: state 7 ports 8 chg 01e8 evt 0000
>[    7.068074] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[    7.068088] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion
>[    7.121933] kjournald starting.  Commit interval 5 seconds
>[    7.121951] EXT3-fs: mounted filesystem with writeback data mode.
>[    7.121966] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>[    7.122024] Freeing unused kernel memory: 328k freed
>[    7.125515] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
>[    7.125540] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>[    7.180267] ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
>[    7.180276] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
>[    7.180284] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
>[    7.236055] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
>[    7.236086] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>[    7.292269] ehci_hcd 0000:00:1d.7: port 6 high speed
>[    7.292278] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>[    7.348046] usb 1-6: new high speed USB device using ehci_hcd and address 4
>[    7.404274] ehci_hcd 0000:00:1d.7: port 6 high speed
>[    7.404283] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>[    7.480432] usb 1-6: udev 4, busnum 1, minor = 3
>[    7.480435] usb 1-6: New USB device found, idVendor=05ac, idProduct=9130
>[    7.481321] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    7.482256] usb 1-6: uevent
>[    7.666440] usb 1-6: usb_probe_device
>[    7.666447] usb 1-6: configuration #1 chosen from 1 choice
>[    7.667543] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>[    7.667563] usb 1-6:1.0: uevent
>[    7.667663] hub 1-6:1.0: usb_probe_interface
>[    7.667666] hub 1-6:1.0: usb_probe_interface - got id
>[    7.667668] hub 1-6:1.0: USB hub found
>[    7.668680] hub 1-6:1.0: 3 ports detected
>[    7.669842] hub 1-6:1.0: compound device; port removable status: RFR
>[    7.669844] hub 1-6:1.0: ganged power switching
>[    7.669847] hub 1-6:1.0: global over-current protection
>[    7.669951] hub 1-6:1.0: TT per port
>[    7.669956] hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
>[    7.669962] hub 1-6:1.0: power on to power good time: 100ms
>[    7.670174] hub 1-6:1.0: local power source is good
>[    7.670178] hub 1-6:1.0: no over-current condition exists
>[    7.670183] hub 1-6:1.0: enabling power on all ports
>[    7.670580] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
>[    7.724284] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[    7.724294] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>[    7.724302] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[    7.768187] hub 1-6:1.0: port 1: status 0101 change 0001
>[    7.768427] hub 1-6:1.0: port 2: status 0101 change 0001
>[    7.780050] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>[    7.780081] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
>[    7.836287] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[    7.836297] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
>[    7.836305] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[    7.868046] usb 1-6: link qh256-0001/f73f6100 start 1 [1/0 us]
>[    7.892041] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
>[    7.892069] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[    7.892080] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    7.892092] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00
>[    7.892104] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>[    8.020046] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>[    8.088040] usb usb2: suspend_rh (auto-stop)
>[    8.132038] usb 3-1: new low speed USB device using uhci_hcd and address 2
>[    8.286351] usb 3-1: skipped 1 descriptor after interface
>[    8.294342] usb 3-1: default language 0x0409
>[    8.313349] usb 3-1: udev 2, busnum 3, minor = 257
>[    8.313355] usb 3-1: New USB device found, idVendor=045e, idProduct=0023
>[    8.314554] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.315449] usb 3-1: Product: Microsoft Trackball OpticalÂ®
>[    8.316363] usb 3-1: Manufacturer: Microsoft
>[    8.317291] usb 3-1: uevent
>[    8.317428] usb 3-1: usb_probe_device
>[    8.317432] usb 3-1: configuration #1 chosen from 1 choice
>[    8.321345] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>[    8.321378] usb 3-1:1.0: uevent
>[    8.321501] usbhid 3-1:1.0: usb_probe_interface
>[    8.321504] usbhid 3-1:1.0: usb_probe_interface - got id
>[    8.336785] input: Microsoft Microsoft Trackball OpticalÂ® as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
>[    8.339852] generic-usb 0003:045E:0023.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball OpticalÂ®] on usb-0000:00:1d.1-1/input0
>[    8.341806] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    8.341815] uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
>[    8.341822] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    8.468047] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    8.580044] usb 4-1: new full speed USB device using uhci_hcd and address 2
>[    8.716040] usb 4-1: ep0 maxpacket = 8
>[    8.733901] usb 4-1: udev 2, busnum 4, minor = 385
>[    8.733907] usb 4-1: New USB device found, idVendor=045e, idProduct=001c
>[    8.735009] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.736047] usb 4-1: uevent
>[    8.736142] usb 4-1: usb_probe_device
>[    8.736146] usb 4-1: configuration #1 chosen from 1 choice
>[    8.739899] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>[    8.739943] usb 4-1:1.0: uevent
>[    8.740088] hub 4-1:1.0: usb_probe_interface
>[    8.740093] hub 4-1:1.0: usb_probe_interface - got id
>[    8.740098] hub 4-1:1.0: USB hub found
>[    8.742892] hub 4-1:1.0: 3 ports detected
>[    8.743990] hub 4-1:1.0: compound device; port removable status: FRR
>[    8.743992] hub 4-1:1.0: individual port power switching
>[    8.743995] hub 4-1:1.0: individual port over-current protection
>[    8.743998] hub 4-1:1.0: power on to power good time: 100ms
>[    8.744890] hub 4-1:1.0: hub controller current requirement: 64mA
>[    8.744896] hub 4-1:1.0: 100mA bus power budget for each child
>[    8.745891] hub 4-1:1.0: enabling power on all ports
>[    8.748938] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>[    8.748952] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
>[    8.748964] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    8.845897] hub 4-1:1.0: port 1: status 0301 change 0001
>[    8.872047] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    8.948046] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
>[    8.984043] usb 5-1: new full speed USB device using uhci_hcd and address 2
>[    9.166153] usb 5-1: skipped 1 descriptor after interface
>[    9.166161] usb 5-1: udev 2, busnum 5, minor = 513
>[    9.166167] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
>[    9.167282] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    9.168343] usb 5-1: uevent
>[    9.168452] usb 5-1: usb_probe_device
>[    9.168456] usb 5-1: configuration #1 chosen from 1 choice
>[    9.173149] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[    9.173186] usb 5-1:1.0: uevent
>[    9.173357] usbhid 5-1:1.0: usb_probe_interface
>[    9.173362] usbhid 5-1:1.0: usb_probe_interface - got id
>[    9.173367] usbhid 5-1:1.0: couldn't find an input interrupt endpoint
>[    9.174389] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[    9.174398] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    9.300045] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    9.412044] usb 5-2: new full speed USB device using uhci_hcd and address 3
>[    9.548036] usb 5-2: ep0 maxpacket = 8
>[    9.574169] usb 5-2: skipped 1 descriptor after interface
>[    9.579161] usb 5-2: default language 0x0409
>[    9.597169] usb 5-2: udev 3, busnum 5, minor = 514
>[    9.597176] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[    9.598276] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.599381] usb 5-2: Product: IR Receiver
>[    9.600493] usb 5-2: Manufacturer: Apple Computer, Inc.
>[    9.601583] usb 5-2: uevent
>[    9.608939] usb 5-2: usb_probe_device
>[    9.608945] usb 5-2: configuration #1 chosen from 1 choice
>[    9.612329] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[    9.612369] usb 5-2:1.0: uevent
>[    9.612817] usbhid 5-2:1.0: usb_probe_interface
>[    9.612820] usbhid 5-2:1.0: usb_probe_interface - got id
>[    9.620414] generic-usb 0003:05AC:8240.0002: hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[    9.622453] hub 1-6:1.0: state 7 ports 3 chg 0006 evt 0000
>[    9.622698] hub 1-6:1.0: port 1, status 0101, change 0000, 12 Mb/s
>[    9.636123] hub 1-6:1.0: port 1 not reset yet, waiting 10ms
>[    9.708132] usb 1-6.1: new high speed USB device using ehci_hcd and address 7
>[    9.724126] hub 1-6:1.0: port 1 not reset yet, waiting 10ms
>[    9.818131] usb 1-6.1: udev 7, busnum 1, minor = 6
>[    9.818136] usb 1-6.1: New USB device found, idVendor=050d, idProduct=0706
>[    9.819224] usb 1-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    9.820335] usb 1-6.1: uevent
>[    9.824361] usb 1-6.1: usb_probe_device
>[    9.824367] usb 1-6.1: configuration #1 chosen from 1 choice
>[    9.825629] usb 1-6.1: adding 1-6.1:1.0 (config #1, interface 0)
>[    9.825657] usb 1-6.1:1.0: uevent
>[    9.825781] hub 1-6.1:1.0: usb_probe_interface
>[    9.825784] hub 1-6.1:1.0: usb_probe_interface - got id
>[    9.825787] hub 1-6.1:1.0: USB hub found
>[    9.827498] hub 1-6.1:1.0: 4 ports detected
>[    9.828560] hub 1-6.1:1.0: standalone hub
>[    9.828562] hub 1-6.1:1.0: ganged power switching
>[    9.828564] hub 1-6.1:1.0: global over-current protection
>[    9.828567] hub 1-6.1:1.0: Single TT
>[    9.828569] hub 1-6.1:1.0: TT requires at most 32 FS bit times (2664 ns)
>[    9.828572] hub 1-6.1:1.0: Port indicators are supported
>[    9.828575] hub 1-6.1:1.0: power on to power good time: 100ms
>[    9.828992] hub 1-6.1:1.0: local power source is good
>[    9.828995] hub 1-6.1:1.0: no over-current condition exists
>[    9.828998] hub 1-6.1:1.0: enabling power on all ports
>[    9.830246] hub 1-6:1.0: port 2, status 0101, change 0000, 12 Mb/s
>[    9.900145] usb 1-6.2: new full speed USB device using ehci_hcd and address 8
>[    9.916131] hub 1-6:1.0: port 2 not reset yet, waiting 10ms
>[    9.929126] hub 1-6.1:1.0: port 4: status 0101 change 0001
>[   10.008037] usb 1-6.2: ep0 maxpacket = 8
>[   10.010134] usb 1-6.2: skipped 1 descriptor after interface
>[   10.010512] usb 1-6.2: default language 0x0409
>[   10.012631] usb 1-6.2: udev 8, busnum 1, minor = 7
>[   10.012637] usb 1-6.2: New USB device found, idVendor=05ac, idProduct=9222
>[   10.013920] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   10.014954] usb 1-6.2: Product: Apple Cinema Display
>[   10.015978] usb 1-6.2: Manufacturer: Apple Computer, Inc.
>[   10.017093] usb 1-6.2: uevent
>[   10.021546] usb 1-6.2: usb_probe_device
>[   10.021551] usb 1-6.2: configuration #1 chosen from 1 choice
>[   10.023022] usb 1-6.2: adding 1-6.2:1.0 (config #1, interface 0)
>[   10.023065] usb 1-6.2:1.0: uevent
>[   10.024973] usbhid 1-6.2:1.0: usb_probe_interface
>[   10.024976] usbhid 1-6.2:1.0: usb_probe_interface - got id
>[   10.032049] usb 1-6.1: link qh256-0001/f73f6280 start 2 [1/0 us]
>[   10.032457] generic-usb 0003:05AC:9222.0003: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema Display] on usb-0000:00:1d.7-6.2/input0
>[   10.034586] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[   10.034590] hub 4-1:1.0: state 7 ports 3 chg 0002 evt 0000
>[   10.035924] hub 4-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>[   10.113948] usb 4-1.1: new low speed USB device using uhci_hcd and address 3
>[   10.233946] usb 4-1.1: skipped 1 descriptor after interface
>[   10.233955] usb 4-1.1: skipped 1 descriptor after interface
>[   10.241927] usb 4-1.1: default language 0x0409
>[   10.253943] usb 4-1.1: udev 3, busnum 4, minor = 386
>[   10.253947] usb 4-1.1: New USB device found, idVendor=045e, idProduct=001d
>[   10.255035] usb 4-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[   10.256150] usb 4-1.1: Product: Microsoft Natural Keyboard Pro
>[   10.257362] usb 4-1.1: uevent
>[   10.261400] usb 4-1.1: usb_probe_device
>[   10.261406] usb 4-1.1: configuration #1 chosen from 1 choice
>[   10.277949] usb 4-1.1: adding 4-1.1:1.0 (config #1, interface 0)
>[   10.289952] usb 4-1.1:1.0: uevent
>[   10.293753] usbhid 4-1.1:1.0: usb_probe_interface
>[   10.293757] usbhid 4-1.1:1.0: usb_probe_interface - got id
>[   10.309569] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input6
>[   10.310738] uhci_hcd 0000:00:1d.2: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
>[   10.315107] generic-usb 0003:045E:001D.0004: input,hidraw3: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1/input0
>[   10.317389] usb 4-1.1: adding 4-1.1:1.1 (config #1, interface 1)
>[   10.328955] usb 4-1.1:1.1: uevent
>[   10.331136] usbhid 4-1.1:1.1: usb_probe_interface
>[   10.331140] usbhid 4-1.1:1.1: usb_probe_interface - got id
>[   10.383497] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input7
>[   10.384687] uhci_hcd 0000:00:1d.2: reserve dev 3 ep82-INT, period 8, phase 4, 87 us
>[   10.423180] generic-usb 0003:045E:001D.0005: input,hidraw4: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1/input1
>[   10.425554] hub 4-1:1.0: 336mA power budget left
>[   10.425560] hub 1-6:1.0: state 7 ports 3 chg 0000 evt 0004
>[   10.425648] hub 1-6.1:1.0: state 7 ports 4 chg 0010 evt 0000
>[   10.426017] hub 1-6.1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>[   10.496289] usb 1-6.1.4: new high speed USB device using ehci_hcd and address 9
>[   10.589891] usb 1-6.1.4: udev 9, busnum 1, minor = 8
>[   10.589895] usb 1-6.1.4: New USB device found, idVendor=050d, idProduct=706a
>[   10.591031] usb 1-6.1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   10.592256] usb 1-6.1.4: uevent
>[   10.594217] usb 1-6.1.4: usb_probe_device
>[   10.594222] usb 1-6.1.4: configuration #1 chosen from 1 choice
>[   10.595646] usb 1-6.1.4: adding 1-6.1.4:1.0 (config #1, interface 0)
>[   10.595672] usb 1-6.1.4:1.0: uevent
>[   10.597454] hub 1-6.1.4:1.0: usb_probe_interface
>[   10.597458] hub 1-6.1.4:1.0: usb_probe_interface - got id
>[   10.597461] hub 1-6.1.4:1.0: USB hub found
>[   10.599140] hub 1-6.1.4:1.0: 4 ports detected
>[   10.600277] hub 1-6.1.4:1.0: standalone hub
>[   10.600280] hub 1-6.1.4:1.0: ganged power switching
>[   10.600282] hub 1-6.1.4:1.0: global over-current protection
>[   10.600285] hub 1-6.1.4:1.0: Single TT
>[   10.600288] hub 1-6.1.4:1.0: TT requires at most 32 FS bit times (2664 ns)
>[   10.600290] hub 1-6.1.4:1.0: Port indicators are supported
>[   10.600293] hub 1-6.1.4:1.0: power on to power good time: 100ms
>[   10.600763] hub 1-6.1.4:1.0: local power source is good
>[   10.600766] hub 1-6.1.4:1.0: no over-current condition exists
>[   10.600769] hub 1-6.1.4:1.0: enabling power on all ports
>[   10.602052] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0002
>[   10.701049] usb 1-6.1.4: link qh256-0001/f73f6380 start 3 [1/0 us]
>[   10.701066] hub 1-6.1.4:1.0: state 7 ports 4 chg 0000 evt 0000
>[   15.642535] udev: starting version 147
>[   15.835447] usb usb2: uevent
>[   15.835466] usb 2-0:1.0: uevent
>[   15.835518] usb usb3: uevent
>[   15.835537] usb 3-0:1.0: uevent
>[   15.835560] usb 3-1: uevent
>[   15.835578] usb 3-1:1.0: uevent
>[   15.835736] usb usb4: uevent
>[   15.835754] usb 4-0:1.0: uevent
>[   15.835776] usb 4-1: uevent
>[   15.835796] usb 4-1.1: uevent
>[   15.835815] usb 4-1.1:1.0: uevent
>[   15.835935] usb 4-1.1:1.1: uevent
>[   15.836085] usb 4-1:1.0: uevent
>[   15.836136] usb usb5: uevent
>[   15.836154] usb 5-0:1.0: uevent
>[   15.836176] usb 5-1: uevent
>[   15.836194] usb 5-1:1.0: uevent
>[   15.836216] usb 5-2: uevent
>[   15.836234] usb 5-2:1.0: uevent
>[   15.836322] usb usb1: uevent
>[   15.836339] usb 1-0:1.0: uevent
>[   15.836361] usb 1-6: uevent
>[   15.836381] usb 1-6.1: uevent
>[   15.836402] usb 1-6.1.4: uevent
>[   15.836422] usb 1-6.1.4:1.0: uevent
>[   15.836443] usb 1-6.1:1.0: uevent
>[   15.836465] usb 1-6.2: uevent
>[   15.836484] usb 1-6.2:1.0: uevent
>[   15.836540] usb 1-6:1.0: uevent
>[   16.132549] usb usb3: uevent
>[   16.133244] usb usb5: uevent
>[   16.133845] usb usb1: uevent
>[   16.133881] usb usb4: uevent
>[   16.162042] usb usb2: uevent
>[   16.220500] usb 5-2: uevent
>[   16.221356] usb 1-6: uevent
>[   16.222932] usb 1-6.1: uevent
>[   16.223674] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[   16.290388] usb 5-1: uevent
>[   16.291550] usb 4-1: uevent
>[   16.292744] usb 3-1: uevent
>[   16.293964] usb 1-6.2: uevent
>[   16.295789] usb 4-1.1: uevent
>[   16.298976] usb 1-6.1.4: uevent
>[   16.344071] cfg80211: Calling CRDA to update world regulatory domain
>[   16.394032] usb 3-1:1.0: uevent
>[   16.394131] usb 3-1: uevent
>[   16.407108] usb 4-1.1:1.1: uevent
>[   16.407208] usb 4-1.1: uevent
>[   16.408450] usb 4-1.1:1.1: uevent
>[   16.429817] usb 4-1.1:1.0: uevent
>[   16.429927] usb 4-1.1: uevent
>[   16.430844] usb 4-1.1:1.0: uevent
>[   16.432809] usb 3-1:1.0: uevent
>[   16.432903] usb 3-1: uevent
>[   16.433857] usb 3-1:1.0: uevent
>[   16.470030] usb 3-1:1.0: uevent
>[   16.537359] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[   16.537373] ath5k 0000:02:00.0: setting latency timer to 64
>[   16.537491] ath5k 0000:02:00.0: registered as 'phy0'
>[   16.682357] usb 5-1: uevent
>[   16.697373] usb 5-1: uhci_result_common: failed with status 440000
>[   16.697389] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
>[   16.733268] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80
>[   16.733282] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>[   16.733292] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
>[   16.864022] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
>[   16.960458] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[   16.960465] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>[   16.960471] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[   17.016056] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>[   17.016085] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[   17.016094] uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
>[   17.016106] hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
>[   17.016109] usb 5-1: USB disconnect, address 2
>[   17.016112] usb 5-1: unregistering device
>[   17.016115] usb 5-1: usb_disable_device nuking all URBs
>[   17.016120] usb 5-1: unregistering interface 5-1:1.0
>[   17.016163] usb 5-1:1.0: uevent
>[   17.016271] usb 5-1: uevent
>[   17.144029] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[   17.256024] usb 5-1: new full speed USB device using uhci_hcd and address 4
>[   17.318040] ath: EEPROM regdomain: 0x65
>[   17.318044] ath: EEPROM indicates we should expect a direct regpair map
>[   17.318048] ath: Country alpha2 being used: 00
>[   17.318050] ath: Regpair used: 0x65
>[   17.453417] usb 5-1: skipped 1 descriptor after interface
>[   17.453423] usb 5-1: udev 4, busnum 5, minor = 515
>[   17.453426] usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
>[   17.453429] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   17.453505] usb 5-1: uevent
>[   17.453525] usb 5-1: usb_probe_device
>[   17.453528] usb 5-1: configuration #1 chosen from 1 choice
>[   17.454344] usb 5-1: uevent
>[   17.457407] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[   17.457433] usb 5-1:1.0: uevent
>[   17.457485] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>[   17.457503] usb 5-1:1.1: uevent
>[   17.457542] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
>[   17.457563] usb 5-1:1.2: uevent
>[   17.457595] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
>[   17.752020] phy0: Selected rate control algorithm 'minstrel'
>[   17.752326] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
>[   19.274439] EXT3 FS on sda3, internal journal
>[   25.833904] Adding 1999992k swap on /swapfile.  Priority:-1 extents:507 across:2517020k 
>[   29.029896] usb usb2: uevent
>[   29.029999] usb 2-0:1.0: uevent
>[   29.030168] usb usb3: uevent
>[   29.030264] usb 3-0:1.0: uevent
>[   29.030324] usb 3-1: uevent
>[   29.030420] usb 3-1:1.0: uevent
>[   29.030975] usb usb4: uevent
>[   29.031072] usb 4-0:1.0: uevent
>[   29.031133] usb 4-1: uevent
>[   29.031230] usb 4-1.1: uevent
>[   29.031325] usb 4-1.1:1.0: uevent
>[   29.031695] usb 4-1.1:1.1: uevent
>[   29.032078] usb 4-1:1.0: uevent
>[   29.032244] usb usb5: uevent
>[   29.032339] usb 5-0:1.0: uevent
>[   29.032400] usb 5-1: uevent
>[   29.032495] usb 5-1:1.0: uevent
>[   29.032553] usb 5-1:1.1: uevent
>[   29.032613] usb 5-1:1.2: uevent
>[   29.032672] usb 5-2: uevent
>[   29.032767] usb 5-2:1.0: uevent
>[   29.033066] usb usb1: uevent
>[   29.033165] usb 1-0:1.0: uevent
>[   29.033227] usb 1-6: uevent
>[   29.033323] usb 1-6.1: uevent
>[   29.033430] usb 1-6.1.4: uevent
>[   29.033528] usb 1-6.1.4:1.0: uevent
>[   29.033590] usb 1-6.1:1.0: uevent
>[   29.033662] usb 1-6.2: uevent
>[   29.033759] usb 1-6.2:1.0: uevent
>[   29.033938] usb 1-6:1.0: uevent
>[   40.056860] i2c-adapter i2c-2: unable to read EDID block.
>[   40.056864] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   40.375851] i2c-adapter i2c-2: unable to read EDID block.
>[   40.375855] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   40.728575] [drm] TV-10: set mode NTSC 480i 0
>[   40.868668] [drm] TV-10: set mode NTSC 480i 0
>[   41.013521] i2c-adapter i2c-2: unable to read EDID block.
>[   41.013525] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   41.331144] i2c-adapter i2c-2: unable to read EDID block.
>[   41.331148] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   41.685629] [drm] TV-10: set mode NTSC 480i 0
>[   41.825694] [drm] TV-10: set mode NTSC 480i 0
>[   42.242488] [drm] TMDS-8: set mode 1680x1050 17
>[   47.625067] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>[   63.498553] usb usb1: uevent
>[   63.498665] usb 1-0:1.0: uevent
>[   63.498734] usb usb2: uevent
>[   63.498836] usb 2-0:1.0: uevent
>[   63.498904] usb usb3: uevent
>[   63.499002] usb 3-0:1.0: uevent
>[   63.499070] usb usb4: uevent
>[   63.499168] usb 4-0:1.0: uevent
>[   63.499236] usb usb5: uevent
>[   63.499334] usb 5-0:1.0: uevent
>[   63.499404] usb 1-6: uevent
>[   63.499502] usb 1-6:1.0: uevent
>[   63.499568] usb 3-1: uevent
>[   63.499665] usb 3-1:1.0: uevent
>[   63.499733] usb 4-1: uevent
>[   63.499832] usb 4-1:1.0: uevent
>[   63.499898] usb 5-1: uevent
>[   63.499994] usb 5-2: uevent
>[   63.500090] usb 5-2:1.0: uevent
>[   63.500156] usb 1-6.1: uevent
>[   63.500254] usb 1-6.1:1.0: uevent
>[   63.500324] usb 1-6.2: uevent
>[   63.500425] usb 1-6.2:1.0: uevent
>[   63.500493] usb 4-1.1: uevent
>[   63.500595] usb 4-1.1:1.0: uevent
>[   63.500664] usb 4-1.1:1.1: uevent
>[   63.500733] usb 1-6.1.4: uevent
>[   63.500836] usb 1-6.1.4:1.0: uevent
>[   63.500904] usb 5-1:1.0: uevent
>[   63.500968] usb 5-1:1.1: uevent
>[   63.502022] usb 5-1:1.2: uevent
>[   73.280577] usb usb2: uevent
>[   73.281141] usb 2-0:1.0: uevent
>[   73.281608] usb usb3: uevent
>[   73.282102] usb 3-0:1.0: uevent
>[   73.282568] usb 3-1: uevent
>[   73.283060] usb 3-1:1.0: uevent
>[   73.283523] usb usb4: uevent
>[   73.284040] usb 4-0:1.0: uevent
>[   73.284505] usb 4-1: uevent
>[   73.284998] usb 4-1.1: uevent
>[   73.285492] usb 4-1.1:1.0: uevent
>[   73.285955] usb 4-1.1:1.1: uevent
>[   73.286414] usb 4-1:1.0: uevent
>[   73.286873] usb usb5: uevent
>[   73.287364] usb 5-0:1.0: uevent
>[   73.287825] usb 5-1: uevent
>[   73.288332] usb 5-1:1.0: uevent
>[   73.288789] usb 5-1:1.1: uevent
>[   73.289251] usb 5-1:1.2: uevent
>[   73.289707] usb 5-2: uevent
>[   73.290198] usb 5-2:1.0: uevent
>[   73.290661] usb usb1: uevent
>[   73.291155] usb 1-0:1.0: uevent
>[   73.291614] usb 1-6: uevent
>[   73.292139] usb 1-6.1: uevent
>[   73.292957] usb 1-6.1.4: uevent
>[   73.293458] usb 1-6.1.4:1.0: uevent
>[   73.293918] usb 1-6.1:1.0: uevent
>[   73.294376] usb 1-6.2: uevent
>[   73.294866] usb 1-6.2:1.0: uevent
>[   73.295323] usb 1-6:1.0: uevent
>[   80.208710] i2c-adapter i2c-2: unable to read EDID block.
>[   80.208715] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   80.530743] i2c-adapter i2c-2: unable to read EDID block.
>[   80.530749] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   80.877812] [drm] TV-10: set mode NTSC 480i 0
>[   81.018891] [drm] TV-10: set mode NTSC 480i 0
>[   81.165725] i2c-adapter i2c-2: unable to read EDID block.
>[   81.165730] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   81.488091] i2c-adapter i2c-2: unable to read EDID block.
>[   81.488097] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   81.846231] [drm] TV-10: set mode NTSC 480i 0
>[   81.986536] [drm] TV-10: set mode NTSC 480i 0
>[   82.616933] i2c-adapter i2c-2: unable to read EDID block.
>[   82.616938] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   82.939935] i2c-adapter i2c-2: unable to read EDID block.
>[   82.939942] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   83.295910] [drm] TV-10: set mode NTSC 480i 0
>[   83.438287] [drm] TV-10: set mode NTSC 480i 0

Actions: View

Attachments on bug 24538: 30430 | 30434 | 31785 | 31786

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.