Attachment 31785 Details for Bug 24538 – dmesg with drm_debug=9

dmesg with drm_debug=9

dmesg.drm_debug9.txt (text/plain), 67.46 KB, created by Greg Kroah-Hartman on 2009-12-06 14:43:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Greg Kroah-Hartman

Created: 2009-12-06 14:43:14 UTC

Size: 67.46 KB

patch

obsolete

>[    0.000000] Linux version 2.6.31.7-rc1-dirty (gregkh@mini) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #80 SMP Sun Dec 6 14:22:02 PST 2009
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   NSC Geode by NSC
>[    0.000000]   Cyrix CyrixInstead
>[    0.000000]   Centaur CentaurHauls
>[    0.000000]   Transmeta GenuineTMx86
>[    0.000000]   Transmeta TransmetaCPU
>[    0.000000]   UMC UMC UMC UMC
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007e0d5000 (usable)
>[    0.000000]  BIOS-e820: 000000007e0d5000 - 000000007e2d6000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007e2d6000 - 000000007eebf000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.4 present.
>[    0.000000] last_pfn = 0x7e0d5 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 07F000000 mask FFF000000 uncachable
>[    0.000000]   3 base 07EF00000 mask FFFF00000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] PAT not supported by CPU.
>[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
>[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
>[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
>[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000ede00 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 000000007e0d5000 (usable)
>[    0.000000]  modified: 000000007e0d5000 - 000000007e2d6000 (ACPI NVS)
>[    0.000000]  modified: 000000007e2d6000 - 000000007eebf000 (ACPI data)
>[    0.000000]  modified: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
>[    0.000000]  modified: 000000007eeef000 - 000000007ef00000 (ACPI data)
>[    0.000000]  modified: 000000007ef00000 - 0000000080000000 (reserved)
>[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
>[    0.000000] initial memory mapped : 0 - 01800000
>[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
>[    0.000000]  0000000000 - 0000400000 page 4k
>[    0.000000]  0000400000 - 0037400000 page 2M
>[    0.000000]  0037400000 - 00377fe000 page 4k
>[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
>[    0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
>[    0.000000] ACPI: XSDT 7eefd120 00074 (v01 APPLE   Apple00 00000055      01000013)
>[    0.000000] ACPI: FACP 7eefb000 000F4 (v03 APPLE   Apple00 00000055 Loki 0000005F)
>[    0.000000] ACPI: DSDT 7eef1000 0389A (v01 APPLE   Macmini 00010001 INTL 20050309)
>[    0.000000] ACPI: FACS 7eec1000 00040
>[    0.000000] ACPI: HPET 7eefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: APIC 7eef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: MCFG 7eef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ASF! 7eef7000 0009C (v32 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SBST 7eef6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ECDT 7eef5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SSDT 7eebd000 0064F (v01 APPLE   SataPri 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7eebc000 0069C (v01 APPLE   SataSec 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7eef0000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1128MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000]   node 0 low ram: 00000000 - 377fe000
>[    0.000000]   node 0 bootmap 00008000 - 0000ef00
>[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>[    0.000000]   #3 [0001000000 - 000161edb4]    TEXT DATA BSS ==> [0001000000 - 000161edb4]
>[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>[    0.000000]   #5 [000161f000 - 00016251f1]              BRK ==> [000161f000 - 00016251f1]
>[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x000377fe
>[    0.000000]   HighMem  0x000377fe -> 0x0007e0d5
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[3] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x00000002
>[    0.000000]     0: 0x00000006 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0007e0d5
>[    0.000000] On node 0 totalpages: 516208
>[    0.000000] free_area_init_node: node 0, pgdat c151a8c0, node_mem_map c1626000
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2258 pages used for memmap
>[    0.000000]   HighMem zone: 286725 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 24
>[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages at c25f8000, static data 35164 bytes
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512174
>[    0.000000] Kernel command line: root=/dev/sda3 vga=0x0305 netconsole=6665@192.168.0.14/eth0,6666@192.168.0.104/00:1F:29:AE:FC:95 drm_debug=9
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007e0d5)
>[    0.000000] Memory: 2040628k/2065236k available (3160k kernel code, 23428k reserved, 2104k data, 328k init, 1155932k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
>[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>[    0.000000]       .init : 0xc1525000 - 0xc1577000   ( 328 kB)
>[    0.000000]       .data : 0xc131628d - 0xc1524670   (2104 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc131628d   (3160 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] NR_IRQS:512
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 1833.382 MHz processor.
>[    0.000037] Console: colour dummy device 80x25
>[    0.000041] console [tty0] enabled
>[    0.000530] hpet clockevent registered
>[    0.000535] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.000544] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.76 BogoMIPS (lpj=7333528)
>[    0.000572] Mount-cache hash table entries: 512
>[    0.000742] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.000748] CPU: L2 cache: 2048K
>[    0.000752] CPU: Physical Processor ID: 0
>[    0.000756] CPU: Processor Core ID: 0
>[    0.000761] mce: CPU supports 6 MCE banks
>[    0.000772] CPU0: Thermal monitoring enabled (TM2)
>[    0.000778] using mwait in idle threads.
>[    0.000787] Performance Counters: unsupported p6 CPU model 14 no PMU driver, software counters only.
>[    0.000797] Checking 'hlt' instruction... OK.
>[    0.016400] ACPI: Core revision 20090521
>[    0.024421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.064699] CPU0: Genuine Intel(R) CPU            1400  @ 1.83GHz stepping 08
>[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
>[    0.004000] Initializing CPU#1
>[    0.004000] Calibrating delay using timer specific routine.. 3666.61 BogoMIPS (lpj=7333233)
>[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.004000] CPU: L2 cache: 2048K
>[    0.004000] CPU: Physical Processor ID: 0
>[    0.004000] CPU: Processor Core ID: 1
>[    0.004000] mce: CPU supports 6 MCE banks
>[    0.004000] CPU1: Thermal monitoring enabled (TM2)
>[    0.152467] CPU1: Genuine Intel(R) CPU            1400  @ 1.83GHz stepping 08
>[    0.152502] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[    0.156047] Brought up 2 CPUs
>[    0.156053] Total of 2 processors activated (7333.38 BogoMIPS).
>[    0.156113] CPU0 attaching sched-domain:
>[    0.156116]  domain 0: span 0-1 level MC
>[    0.156119]   groups: 0 1
>[    0.156125] CPU1 attaching sched-domain:
>[    0.156127]  domain 0: span 0-1 level MC
>[    0.156130]   groups: 1 0
>[    0.156204] NET: Registered protocol family 16
>[    0.156204] ACPI: bus type pci registered
>[    0.156204] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>[    0.156204] PCI: MCFG area at e0000000 reserved in E820
>[    0.156204] PCI: Using MMCONFIG for extended config space
>[    0.156204] PCI: Using configuration type 1 for base access
>[    0.160072] bio: create slab <bio-0> at 0
>[    0.160605] ACPI: EC: EC description table is found, configuring boot EC
>[    0.165111] ACPI: BIOS _OSI(Linux) query ignored
>[    0.168179] ACPI: Interpreter enabled
>[    0.168190] ACPI: (supports S0 S3 S5)
>[    0.168208] ACPI: Using IOAPIC for interrupt routing
>[    0.172427] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.172427] ACPI: EC: driver started in poll mode
>[    0.172427] ACPI: No dock devices found.
>[    0.173121] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.173155] pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff]
>[    0.173155] pci 0000:00:02.0: reg 14 io port: [0x20f0-0x20f7]
>[    0.173155] pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff]
>[    0.173155] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff]
>[    0.173155] pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff]
>[    0.173155] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff]
>[    0.173155] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.173155] pci 0000:00:1b.0: PME# disabled
>[    0.173155] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.173155] pci 0000:00:1c.0: PME# disabled
>[    0.173155] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.173155] pci 0000:00:1c.1: PME# disabled
>[    0.173155] pci 0000:00:1d.0: reg 20 io port: [0x20a0-0x20bf]
>[    0.173155] pci 0000:00:1d.1: reg 20 io port: [0x2080-0x209f]
>[    0.173155] pci 0000:00:1d.2: reg 20 io port: [0x2060-0x207f]
>[    0.173155] pci 0000:00:1d.3: reg 20 io port: [0x2040-0x205f]
>[    0.173155] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff]
>[    0.173155] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.173155] pci 0000:00:1d.7: PME# disabled
>[    0.173155] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>[    0.173155] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>[    0.173155] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
>[    0.173155] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>[    0.173155] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
>[    0.173155] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
>[    0.173155] pci 0000:00:1f.1: reg 10 io port: [0x20e8-0x20ef]
>[    0.173158] pci 0000:00:1f.1: reg 14 io port: [0x2104-0x2107]
>[    0.173167] pci 0000:00:1f.1: reg 18 io port: [0x20e0-0x20e7]
>[    0.173175] pci 0000:00:1f.1: reg 1c io port: [0x2100-0x2103]
>[    0.173184] pci 0000:00:1f.1: reg 20 io port: [0x20c0-0x20cf]
>[    0.173242] pci 0000:00:1f.2: reg 10 io port: [0x20d8-0x20df]
>[    0.173250] pci 0000:00:1f.2: reg 14 io port: [0x20fc-0x20ff]
>[    0.173259] pci 0000:00:1f.2: reg 18 io port: [0x20d0-0x20d7]
>[    0.173267] pci 0000:00:1f.2: reg 1c io port: [0x20f8-0x20fb]
>[    0.173276] pci 0000:00:1f.2: reg 20 io port: [0x2020-0x202f]
>[    0.173285] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff]
>[    0.173315] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.173322] pci 0000:00:1f.2: PME# disabled
>[    0.173387] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
>[    0.173498] pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
>[    0.173510] pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff]
>[    0.173545] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
>[    0.173599] pci 0000:01:00.0: supports D1 D2
>[    0.173602] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.173612] pci 0000:01:00.0: PME# disabled
>[    0.173649] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.173756] pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
>[    0.173762] pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
>[    0.176065] pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
>[    0.176195] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.176295] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
>[    0.176350] pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
>[    0.176410] pci 0000:03:03.0: supports D1 D2
>[    0.176413] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.176421] pci 0000:03:03.0: PME# disabled
>[    0.176480] pci 0000:00:1e.0: transparent bridge
>[    0.176491] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
>[    0.176518] pci_bus 0000:00: on NUMA node 0
>[    0.176523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.176749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.176833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.176933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.180333] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.180333] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.180333] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.180396] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.180499] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.180604] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.184179] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.184287] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>[    0.184341] SCSI subsystem initialized
>[    0.184341] libata version 3.00 loaded.
>[    0.184341] usbcore: registered new interface driver usbfs
>[    0.184341] usbcore: registered new interface driver hub
>[    0.184341] usbcore: registered new device driver usb
>[    0.184341] PCI: Using ACPI for IRQ routing
>[    0.220009] pnp: PnP ACPI init
>[    0.220023] ACPI: bus type pnp registered
>[    0.221739] pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 (0x1000-0x1fff), disabling
>[    0.221926] pnp: PnP ACPI: found 10 devices
>[    0.221931] ACPI: ACPI bus type pnp unregistered
>[    0.221944] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>[    0.221950] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>[    0.221957] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>[    0.221964] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>[    0.221970] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>[    0.221977] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>[    0.221987] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
>[    0.221997] system 00:08: ioport range 0x680-0x6ef has been reserved
>[    0.222004] system 00:08: ioport range 0x800-0x80f has been reserved
>[    0.222010] system 00:08: ioport range 0x810-0x817 has been reserved
>[    0.222016] system 00:08: ioport range 0x400-0x47f has been reserved
>[    0.222022] system 00:08: ioport range 0x500-0x53f has been reserved
>[    0.257135] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
>[    0.257177] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>[    0.257184] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>[    0.257193] pci 0000:00:1c.0:   MEM window: 0x90200000-0x902fffff
>[    0.257201] pci 0000:00:1c.0:   PREFETCH window: 0x90500000-0x905fffff
>[    0.257210] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>[    0.257214] pci 0000:00:1c.1:   IO window: disabled
>[    0.257223] pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
>[    0.257231] pci 0000:00:1c.1:   PREFETCH window: disabled
>[    0.257238] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>[    0.257243] pci 0000:00:1e.0:   IO window: disabled
>[    0.257252] pci 0000:00:1e.0:   MEM window: 0x90000000-0x900fffff
>[    0.257260] pci 0000:00:1e.0:   PREFETCH window: disabled
>[    0.257278] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    0.257287] pci 0000:00:1c.0: setting latency timer to 64
>[    0.257297] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>[    0.257305] pci 0000:00:1c.1: setting latency timer to 64
>[    0.257366] pci 0000:00:1e.0: power state changed by ACPI to D0
>[    0.257376] pci 0000:00:1e.0: setting latency timer to 64
>[    0.257382] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.257385] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>[    0.257389] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
>[    0.257392] pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff]
>[    0.257395] pci_bus 0000:01: resource 2 pref mem [0x90500000-0x905fffff]
>[    0.257399] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
>[    0.257402] pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff]
>[    0.257405] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>[    0.257408] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
>[    0.257441] NET: Registered protocol family 2
>[    0.257530] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.257843] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.258941] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.259470] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.259476] TCP reno registered
>[    0.259566] NET: Registered protocol family 1
>[    0.260750] cpu0(2) debug files 133
>[    0.261967] cpu1(2) debug files 133
>[    0.262277] Scanning for low memory corruption every 60 seconds
>[    0.262728] highmem bounce pool size: 64 pages
>[    0.262737] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.267077] msgmni has been set to 1729
>[    0.267419] alg: No test for stdrng (krng)
>[    0.267544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>[    0.267552] io scheduler noop registered
>[    0.267556] io scheduler anticipatory registered
>[    0.267561] io scheduler deadline registered
>[    0.267645] io scheduler cfq registered (default)
>[    0.267701] pci 0000:00:02.0: Boot video device
>[    0.267715] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
>[    0.267718] pci 0000:00:1d.0: Performing full reset
>[    0.267738] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.267740] pci 0000:00:1d.1: Performing full reset
>[    0.267759] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.267761] pci 0000:00:1d.2: Performing full reset
>[    0.267780] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.267783] pci 0000:00:1d.3: Performing full reset
>[    0.268109] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>[    0.268122] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[    0.268371] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>[    0.268382] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[    0.268810] vesafb: framebuffer at 0x80000000, mapped to 0xf8080000, using 1536k, total 16064k
>[    0.268819] vesafb: mode is 1024x768x8, linelength=1024, pages=19
>[    0.268823] vesafb: scrolling: redraw
>[    0.268829] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>[    0.277013] Console: switching to colour frame buffer device 128x48
>[    0.285081] fb0: VESA VGA frame buffer device
>[    0.285368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    0.285478] ACPI: Power Button [PWRF]
>[    0.285630] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    0.285751] ACPI: Power Button [PWRB]
>[    0.286301] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input2
>[    0.286432] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.287043] ACPI: SSDT 7eebac90 0022A (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
>[    0.287484] ACPI: SSDT 7eeb9e10 001BA (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
>[    0.287864] Monitor-Mwait will be used to enter C-1 state
>[    0.287893] Monitor-Mwait will be used to enter C-2 state
>[    0.287899] Marking TSC unstable due to TSC halts in idle
>[    0.288005] Switched to high resolution mode on CPU 0
>[    0.288052] ACPI: CPU0 (power states: C1[C1] C2[C2])
>[    0.288199] processor LNXCPU:00: registered as cooling_device0
>[    0.288288] ACPI: Processor [CPU0] (supports 8 throttling states)
>[    0.288551] Switched to high resolution mode on CPU 1
>[    0.288758] ACPI: SSDT 7eebaf10 00087 (v01 APPLE   Cpu1Ist 00003000 INTL 20050309)
>[    0.289144] ACPI: SSDT 7eeb8f10 00085 (v01 APPLE   Cpu1Cst 00003000 INTL 20050309)
>[    0.289658] ACPI: CPU1 (power states: C1[C1] C2[C2])
>[    0.289796] processor LNXCPU:01: registered as cooling_device1
>[    0.289886] ACPI: Processor [CPU1] (supports 8 throttling states)
>[    0.295018] Real Time Clock Driver v1.12b
>[    0.295137] Non-volatile memory driver v1.3
>[    0.295202] Linux agpgart interface v0.103
>[    0.295277] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>[    0.296045] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
>[    0.302170] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>[    0.305535] [drm] Initialized drm 1.1.0 20060810
>[    0.308730] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.311971] i915 0000:00:02.0: setting latency timer to 64
>[    0.677459] i2c-adapter i2c-2: unable to read EDID block.
>[    0.678376] i915 0000:00:02.0: DVI-D-1: no EDID data
>[    1.003061] i2c-adapter i2c-2: unable to read EDID block.
>[    1.003975] i915 0000:00:02.0: DVI-D-1: no EDID data
>[    1.364910] [drm] TV-10: set mode NTSC 480i 0
>[    1.507270] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    1.508359] [drm] fb1: inteldrmfb frame buffer device
>[    1.509307] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.512617] brd: module loaded
>[    1.513566] Uniform Multi-Platform E-IDE driver
>[    1.514720] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
>[    1.515712] PIIX_IDE 0000:00:1f.1: power state changed by ACPI to D0
>[    1.516658] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.517635] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>[    1.518595]     ide0: BM-DMA at 0x20c0-0x20c7
>[    1.519573]     ide1: BM-DMA at 0x20c8-0x20cf
>[    1.520525] Probing IDE interface ide0...
>[    2.256419] hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive
>[    2.592094] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[    2.592357] hda: UDMA/66 mode selected
>[    2.593572] Probing IDE interface ide1...
>[    3.160101] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[    3.161061] ide1 at 0x170-0x177,0x376 on irq 15
>[    3.162197] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>[    3.163144] ide-cd driver 5.00
>[    3.165152] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>[    3.166125] Uniform CD-ROM driver Revision: 3.20
>[    3.181020] ata_piix 0000:00:1f.2: version 2.13
>[    3.181033] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
>[    3.181984] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    3.182925] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>[    3.336020] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    3.336088] scsi0 : ata_piix
>[    3.337168] scsi1 : ata_piix
>[    3.339120] ata1: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19
>[    3.340053] ata2: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19
>[    3.341029] sky2 driver version 1.23
>[    3.341959] sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    3.342880] sky2 0000:01:00.0: setting latency timer to 64
>[    3.342906] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
>[    3.343921] sky2 0000:01:00.0: irq 26 for MSI/MSI-X
>[    3.344251] sky2 eth0: addr 00:16:cb:97:b9:60
>[    3.345199] tun: Universal TUN/TAP device driver, 1.6
>[    3.346109] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    3.347081] netconsole: local port 6665
>[    3.347986] netconsole: local IP 192.168.0.14
>[    3.348892] netconsole: interface eth0
>[    3.349771] netconsole: remote port 6666
>[    3.350646] netconsole: remote IP 192.168.0.104
>[    3.351519] netconsole: remote ethernet address 00:1f:29:ae:fc:95
>[    3.352408] netconsole: device eth0 not up yet, forcing it
>[    3.355313] sky2 eth0: enabling interface
>[    3.518469] ata1.01: ATA-7: FUJITSU MHV2080BHPL, 0081702E, max UDMA/100
>[    3.519350] ata1.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    3.532539] ata1.01: configured for UDMA/100
>[    3.533506] scsi 0:0:1:0: Direct-Access     ATA      FUJITSU MHV2080B 0081 PQ: 0 ANSI: 5
>[    3.534712] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    3.535612] sd 0:0:1:0: Attached scsi generic sg0 type 0
>[    3.536595] sd 0:0:1:0: [sda] Write Protect is off
>[    3.537494] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>[    3.537521] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.538552]  sda: sda1 sda2 sda3
>[    3.620244] sd 0:0:1:0: [sda] Attached SCSI disk
>[    6.458704] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[    6.472031] console [netcon0] enabled
>[    6.736507] netconsole: network logging started
>[    6.737513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    6.738417] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>[    6.738447] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    6.739353] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    6.739357] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    6.740332] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    6.741218] ehci_hcd 0000:00:1d.7: using broken periodic workaround
>[    6.742124] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>[    6.742129] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    6.742148] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    6.746057] ehci_hcd 0000:00:1d.7: debug port 1
>[    6.746947] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    6.746950] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    6.746965] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
>[    6.747852] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    6.751723] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    6.764013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    6.764928] usb usb1: default language 0x0409
>[    6.764937] usb usb1: udev 1, busnum 1, minor = 0
>[    6.764940] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    6.765840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.766733] usb usb1: Product: EHCI Host Controller
>[    6.767592] usb usb1: Manufacturer: Linux 2.6.31.7-rc1-dirty ehci_hcd
>[    6.768472] usb usb1: SerialNumber: 0000:00:1d.7
>[    6.769357] usb usb1: uevent
>[    6.769404] usb usb1: usb_probe_device
>[    6.769407] usb usb1: configuration #1 chosen from 1 choice
>[    6.770270] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    6.770288] usb 1-0:1.0: uevent
>[    6.770334] hub 1-0:1.0: usb_probe_interface
>[    6.770336] hub 1-0:1.0: usb_probe_interface - got id
>[    6.770339] hub 1-0:1.0: USB hub found
>[    6.771188] hub 1-0:1.0: 8 ports detected
>[    6.772041] hub 1-0:1.0: standalone hub
>[    6.772044] hub 1-0:1.0: no power switching (usb 1.0)
>[    6.772046] hub 1-0:1.0: individual port over-current protection
>[    6.772049] hub 1-0:1.0: power on to power good time: 20ms
>[    6.772055] hub 1-0:1.0: local power source is good
>[    6.772058] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    6.772163] uhci_hcd: USB Universal Host Controller Interface driver
>[    6.773056] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    6.773924] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    6.773928] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    6.774839] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    6.775724] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    6.776587] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.776590] uhci_hcd 0000:00:1d.0: Performing full reset
>[    6.776607] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    6.776613] uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0
>[    6.777512] usb usb2: default language 0x0409
>[    6.777520] usb usb2: udev 1, busnum 2, minor = 128
>[    6.777523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.778380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.779245] usb usb2: Product: UHCI Host Controller
>[    6.780103] usb usb2: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.780972] usb usb2: SerialNumber: 0000:00:1d.0
>[    6.781853] usb usb2: uevent
>[    6.781899] usb usb2: usb_probe_device
>[    6.781902] usb usb2: configuration #1 chosen from 1 choice
>[    6.782779] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    6.782804] usb 2-0:1.0: uevent
>[    6.782849] hub 2-0:1.0: usb_probe_interface
>[    6.782852] hub 2-0:1.0: usb_probe_interface - got id
>[    6.782854] hub 2-0:1.0: USB hub found
>[    6.783720] hub 2-0:1.0: 2 ports detected
>[    6.784602] hub 2-0:1.0: standalone hub
>[    6.784604] hub 2-0:1.0: no power switching (usb 1.0)
>[    6.784607] hub 2-0:1.0: individual port over-current protection
>[    6.784609] hub 2-0:1.0: power on to power good time: 2ms
>[    6.784614] hub 2-0:1.0: local power source is good
>[    6.784617] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    6.784663] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    6.785554] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    6.785558] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    6.786514] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    6.787412] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    6.788320] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.788323] uhci_hcd 0000:00:1d.1: Performing full reset
>[    6.788338] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    6.788344] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
>[    6.789259] usb usb3: default language 0x0409
>[    6.789267] usb usb3: udev 1, busnum 3, minor = 256
>[    6.789270] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.790170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.791054] usb usb3: Product: UHCI Host Controller
>[    6.791934] usb usb3: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.792809] usb usb3: SerialNumber: 0000:00:1d.1
>[    6.793710] usb usb3: uevent
>[    6.793755] usb usb3: usb_probe_device
>[    6.793758] usb usb3: configuration #1 chosen from 1 choice
>[    6.794627] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    6.794652] usb 3-0:1.0: uevent
>[    6.794709] hub 3-0:1.0: usb_probe_interface
>[    6.794712] hub 3-0:1.0: usb_probe_interface - got id
>[    6.794715] hub 3-0:1.0: USB hub found
>[    6.795566] hub 3-0:1.0: 2 ports detected
>[    6.796397] hub 3-0:1.0: standalone hub
>[    6.796399] hub 3-0:1.0: no power switching (usb 1.0)
>[    6.796402] hub 3-0:1.0: individual port over-current protection
>[    6.796404] hub 3-0:1.0: power on to power good time: 2ms
>[    6.796409] hub 3-0:1.0: local power source is good
>[    6.796412] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    6.796457] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    6.797316] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    6.797320] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    6.798211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    6.799058] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    6.799886] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.799889] uhci_hcd 0000:00:1d.2: Performing full reset
>[    6.799905] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    6.799919] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
>[    6.800789] usb usb4: default language 0x0409
>[    6.800797] usb usb4: udev 1, busnum 4, minor = 384
>[    6.800800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.801627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.802463] usb usb4: Product: UHCI Host Controller
>[    6.803283] usb usb4: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.804130] usb usb4: SerialNumber: 0000:00:1d.2
>[    6.804987] usb usb4: uevent
>[    6.805034] usb usb4: usb_probe_device
>[    6.805037] usb usb4: configuration #1 chosen from 1 choice
>[    6.805885] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    6.805907] usb 4-0:1.0: uevent
>[    6.805950] hub 4-0:1.0: usb_probe_interface
>[    6.805953] hub 4-0:1.0: usb_probe_interface - got id
>[    6.805955] hub 4-0:1.0: USB hub found
>[    6.806790] hub 4-0:1.0: 2 ports detected
>[    6.807620] hub 4-0:1.0: standalone hub
>[    6.807623] hub 4-0:1.0: no power switching (usb 1.0)
>[    6.807625] hub 4-0:1.0: individual port over-current protection
>[    6.807628] hub 4-0:1.0: power on to power good time: 2ms
>[    6.807633] hub 4-0:1.0: local power source is good
>[    6.807635] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    6.807681] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>[    6.808535] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    6.808539] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    6.809443] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    6.810285] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    6.811128] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>[    6.811130] uhci_hcd 0000:00:1d.3: Performing full reset
>[    6.811147] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>[    6.811154] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
>[    6.812033] usb usb5: default language 0x0409
>[    6.812042] usb usb5: udev 1, busnum 5, minor = 512
>[    6.812045] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    6.812894] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.813735] usb usb5: Product: UHCI Host Controller
>[    6.814578] usb usb5: Manufacturer: Linux 2.6.31.7-rc1-dirty uhci_hcd
>[    6.815413] usb usb5: SerialNumber: 0000:00:1d.3
>[    6.816300] usb usb5: uevent
>[    6.816343] usb usb5: usb_probe_device
>[    6.816346] usb usb5: configuration #1 chosen from 1 choice
>[    6.817189] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    6.817211] usb 5-0:1.0: uevent
>[    6.817267] hub 5-0:1.0: usb_probe_interface
>[    6.817270] hub 5-0:1.0: usb_probe_interface - got id
>[    6.817273] hub 5-0:1.0: USB hub found
>[    6.818105] hub 5-0:1.0: 2 ports detected
>[    6.818931] hub 5-0:1.0: standalone hub
>[    6.818933] hub 5-0:1.0: no power switching (usb 1.0)
>[    6.818936] hub 5-0:1.0: individual port over-current protection
>[    6.818938] hub 5-0:1.0: power on to power good time: 2ms
>[    6.818943] hub 5-0:1.0: local power source is good
>[    6.818946] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    6.819097] usbcore: registered new interface driver libusual
>[    6.820135] PNP: No PS/2 controller found. Probing ports directly.
>[    6.821867] i8042.c: No controller found.
>[    6.822768] mice: PS/2 mouse device common for all mice
>[    6.824225] cpuidle: using governor ladder
>[    6.825545] cpuidle: using governor menu
>[    6.827956] usbcore: registered new interface driver usbhid
>[    6.828794] usbhid: v2.6:USB HID core driver
>[    6.829699] Advanced Linux Sound Architecture Driver Version 1.0.20.
>[    6.831075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    6.831954] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    6.872051] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
>[    6.872059] hub 1-0:1.0: port 3: status 0501 change 0001
>[    6.872078] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>[    6.872085] hub 1-0:1.0: port 5: status 0501 change 0001
>[    6.872100] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>[    6.872108] hub 1-0:1.0: port 6: status 0501 change 0001
>[    6.872123] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>[    6.872130] hub 1-0:1.0: port 7: status 0501 change 0001
>[    6.872145] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
>[    6.872152] hub 1-0:1.0: port 8: status 0501 change 0001
>[    6.880053] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    6.892043] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
>[    6.896073] hda_codec: STAC922x, Apple subsys_id=106b0800
>[    6.904046] uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
>[    6.904068] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
>[    6.904603] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
>[    6.905625] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
>[    6.907673] ALSA device list:
>[    6.908555]   #0: HDA Intel at 0x90440000 irq 22
>[    6.909816] TCP cubic registered
>[    6.910677] Initializing XFRM netlink socket
>[    6.911547] NET: Registered protocol family 17
>[    6.912442] Using IPI No-Shortcut mode
>[    6.913499] registered taskstats version 1
>[    6.920042] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
>[    6.920064] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[    6.968043] hub 1-0:1.0: state 7 ports 8 chg 01e8 evt 0000
>[    6.968055] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[    6.968069] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion
>[    7.024037] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
>[    7.024070] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>[    7.080265] ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
>[    7.080274] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
>[    7.080282] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
>[    7.112406] EXT3-fs: INFO: recovery required on readonly filesystem.
>[    7.113489] EXT3-fs: write access will be enabled during recovery.
>[    7.136052] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
>[    7.136083] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>[    7.192268] ehci_hcd 0000:00:1d.7: port 6 high speed
>[    7.192277] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>[    7.248040] usb 1-6: new high speed USB device using ehci_hcd and address 4
>[    7.304272] ehci_hcd 0000:00:1d.7: port 6 high speed
>[    7.304281] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>[    7.380425] usb 1-6: udev 4, busnum 1, minor = 3
>[    7.380428] usb 1-6: New USB device found, idVendor=05ac, idProduct=9130
>[    7.381302] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    7.382238] usb 1-6: uevent
>[    7.382295] usb 1-6: usb_probe_device
>[    7.382299] usb 1-6: configuration #1 chosen from 1 choice
>[    7.383337] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>[    7.383355] usb 1-6:1.0: uevent
>[    7.383416] hub 1-6:1.0: usb_probe_interface
>[    7.383418] hub 1-6:1.0: usb_probe_interface - got id
>[    7.383421] hub 1-6:1.0: USB hub found
>[    7.384421] hub 1-6:1.0: 3 ports detected
>[    7.385598] hub 1-6:1.0: compound device; port removable status: RFR
>[    7.385601] hub 1-6:1.0: ganged power switching
>[    7.385603] hub 1-6:1.0: global over-current protection
>[    7.385669] hub 1-6:1.0: TT per port
>[    7.385672] hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
>[    7.385674] hub 1-6:1.0: power on to power good time: 100ms
>[    7.385917] hub 1-6:1.0: local power source is good
>[    7.385922] hub 1-6:1.0: no over-current condition exists
>[    7.385927] hub 1-6:1.0: enabling power on all ports
>[    7.386323] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
>[    7.441277] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[    7.441287] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>[    7.441295] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[    7.484176] hub 1-6:1.0: port 1: status 0101 change 0001
>[    7.484425] hub 1-6:1.0: port 2: status 0101 change 0001
>[    7.496048] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>[    7.496080] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
>[    7.552282] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[    7.552293] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
>[    7.552303] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[    7.584055] usb 1-6: link qh256-0001/f72ba100 start 1 [1/0 us]
>[    7.608057] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
>[    7.608095] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[    7.608106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    7.608119] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00
>[    7.608131] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>[    7.736052] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>[    7.840045] usb usb2: suspend_rh (auto-stop)
>[    7.848047] usb 3-1: new low speed USB device using uhci_hcd and address 2
>[    8.002331] usb 3-1: skipped 1 descriptor after interface
>[    8.010322] usb 3-1: default language 0x0409
>[    8.029385] usb 3-1: udev 2, busnum 3, minor = 257
>[    8.029389] usb 3-1: New USB device found, idVendor=045e, idProduct=0023
>[    8.030354] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.031319] usb 3-1: Product: Microsoft Trackball OpticalÂ®
>[    8.032281] usb 3-1: Manufacturer: Microsoft
>[    8.033314] usb 3-1: uevent
>[    8.033409] usb 3-1: usb_probe_device
>[    8.033412] usb 3-1: configuration #1 chosen from 1 choice
>[    8.037327] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>[    8.037428] usb 3-1:1.0: uevent
>[    8.037493] usbhid 3-1:1.0: usb_probe_interface
>[    8.037496] usbhid 3-1:1.0: usb_probe_interface - got id
>[    8.052875] input: Microsoft Microsoft Trackball OpticalÂ® as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
>[    8.053994] generic-usb 0003:045E:0023.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball OpticalÂ®] on usb-0000:00:1d.1-1/input0
>[    8.055875] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    8.055885] uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
>[    8.055894] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    8.180044] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    8.292044] usb 4-1: new full speed USB device using uhci_hcd and address 2
>[    8.428037] usb 4-1: ep0 maxpacket = 8
>[    8.445869] usb 4-1: udev 2, busnum 4, minor = 385
>[    8.445874] usb 4-1: New USB device found, idVendor=045e, idProduct=001c
>[    8.447042] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.448123] usb 4-1: uevent
>[    8.448182] usb 4-1: usb_probe_device
>[    8.448185] usb 4-1: configuration #1 chosen from 1 choice
>[    8.451864] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>[    8.451909] usb 4-1:1.0: uevent
>[    8.451999] hub 4-1:1.0: usb_probe_interface
>[    8.452021] hub 4-1:1.0: usb_probe_interface - got id
>[    8.452025] hub 4-1:1.0: USB hub found
>[    8.454860] hub 4-1:1.0: 3 ports detected
>[    8.455948] hub 4-1:1.0: compound device; port removable status: FRR
>[    8.455951] hub 4-1:1.0: individual port power switching
>[    8.455953] hub 4-1:1.0: individual port over-current protection
>[    8.455956] hub 4-1:1.0: power on to power good time: 100ms
>[    8.456858] hub 4-1:1.0: hub controller current requirement: 64mA
>[    8.456864] hub 4-1:1.0: 100mA bus power budget for each child
>[    8.457859] hub 4-1:1.0: enabling power on all ports
>[    8.460902] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>[    8.460915] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
>[    8.460927] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    8.557868] hub 4-1:1.0: port 1: status 0301 change 0001
>[    8.584072] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    8.660044] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
>[    8.696041] usb 5-1: new full speed USB device using uhci_hcd and address 2
>[    8.877127] usb 5-1: skipped 1 descriptor after interface
>[    8.877134] usb 5-1: skipped 1 descriptor after interface
>[    8.877141] usb 5-1: udev 2, busnum 5, minor = 513
>[    8.877146] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
>[    8.878237] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.879229] usb 5-1: uevent
>[    8.879306] usb 5-1: usb_probe_device
>[    8.879309] usb 5-1: configuration #1 chosen from 1 choice
>[    8.884123] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[    8.884157] usb 5-1:1.0: uevent
>[    8.884252] usbhid 5-1:1.0: usb_probe_interface
>[    8.884257] usbhid 5-1:1.0: usb_probe_interface - got id
>[    8.901568] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
>[    8.902559] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[    8.902695] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
>[    8.904798] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>[    8.904815] usb 5-1:1.1: uevent
>[    8.904874] usbhid 5-1:1.1: usb_probe_interface
>[    8.904877] usbhid 5-1:1.1: usb_probe_interface - got id
>[    8.940575] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input7
>[    8.941885] generic-usb 0003:05AC:1000.0003: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
>[    8.943063] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[    8.943072] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    9.068046] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    9.180041] usb 5-2: new full speed USB device using uhci_hcd and address 3
>[    9.316037] usb 5-2: ep0 maxpacket = 8
>[    9.343139] usb 5-2: skipped 1 descriptor after interface
>[    9.348138] usb 5-2: default language 0x0409
>[    9.366137] usb 5-2: udev 3, busnum 5, minor = 514
>[    9.366142] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[    9.367371] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.368478] usb 5-2: Product: IR Receiver
>[    9.369631] usb 5-2: Manufacturer: Apple Computer, Inc.
>[    9.370806] usb 5-2: uevent
>[    9.370867] usb 5-2: usb_probe_device
>[    9.370870] usb 5-2: configuration #1 chosen from 1 choice
>[    9.374143] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[    9.374177] usb 5-2:1.0: uevent
>[    9.374272] usbhid 5-2:1.0: usb_probe_interface
>[    9.374277] usbhid 5-2:1.0: usb_probe_interface - got id
>[    9.380247] generic-usb 0003:05AC:8240.0004: hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[    9.382491] hub 1-6:1.0: state 7 ports 3 chg 0006 evt 0000
>[    9.382786] hub 1-6:1.0: port 1, status 0101, change 0000, 12 Mb/s
>[    9.396112] hub 1-6:1.0: port 1 not reset yet, waiting 10ms
>[    9.468129] usb 1-6.1: new high speed USB device using ehci_hcd and address 7
>[    9.484117] hub 1-6:1.0: port 1 not reset yet, waiting 10ms
>[    9.577624] usb 1-6.1: udev 7, busnum 1, minor = 6
>[    9.577630] usb 1-6.1: New USB device found, idVendor=050d, idProduct=0706
>[    9.578988] usb 1-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    9.580142] usb 1-6.1: uevent
>[    9.580199] usb 1-6.1: usb_probe_device
>[    9.580202] usb 1-6.1: configuration #1 chosen from 1 choice
>[    9.581626] usb 1-6.1: adding 1-6.1:1.0 (config #1, interface 0)
>[    9.581659] usb 1-6.1:1.0: uevent
>[    9.581829] hub 1-6.1:1.0: usb_probe_interface
>[    9.581834] hub 1-6.1:1.0: usb_probe_interface - got id
>[    9.581839] hub 1-6.1:1.0: USB hub found
>[    9.583745] hub 1-6.1:1.0: 4 ports detected
>[    9.585006] hub 1-6.1:1.0: standalone hub
>[    9.585008] hub 1-6.1:1.0: ganged power switching
>[    9.585011] hub 1-6.1:1.0: global over-current protection
>[    9.585013] hub 1-6.1:1.0: Single TT
>[    9.585016] hub 1-6.1:1.0: TT requires at most 32 FS bit times (2664 ns)
>[    9.585019] hub 1-6.1:1.0: Port indicators are supported
>[    9.585021] hub 1-6.1:1.0: power on to power good time: 100ms
>[    9.585492] hub 1-6.1:1.0: local power source is good
>[    9.585497] hub 1-6.1:1.0: no over-current condition exists
>[    9.585503] hub 1-6.1:1.0: enabling power on all ports
>[    9.586875] hub 1-6:1.0: port 2, status 0101, change 0000, 12 Mb/s
>[    9.656134] usb 1-6.2: new full speed USB device using ehci_hcd and address 8
>[    9.672124] hub 1-6:1.0: port 2 not reset yet, waiting 10ms
>[    9.685119] hub 1-6.1:1.0: port 4: status 0101 change 0001
>[    9.764037] usb 1-6.2: ep0 maxpacket = 8
>[    9.766254] usb 1-6.2: skipped 1 descriptor after interface
>[    9.766634] usb 1-6.2: default language 0x0409
>[    9.768756] usb 1-6.2: udev 8, busnum 1, minor = 7
>[    9.768762] usb 1-6.2: New USB device found, idVendor=05ac, idProduct=9222
>[    9.770016] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.771130] usb 1-6.2: Product: Apple Cinema Display
>[    9.772252] usb 1-6.2: Manufacturer: Apple Computer, Inc.
>[    9.773400] usb 1-6.2: uevent
>[    9.773459] usb 1-6.2: usb_probe_device
>[    9.773462] usb 1-6.2: configuration #1 chosen from 1 choice
>[    9.775012] usb 1-6.2: adding 1-6.2:1.0 (config #1, interface 0)
>[    9.775126] usb 1-6.2:1.0: uevent
>[    9.775223] usbhid 1-6.2:1.0: usb_probe_interface
>[    9.775228] usbhid 1-6.2:1.0: usb_probe_interface - got id
>[    9.781736] generic-usb 0003:05AC:9222.0005: hidraw4: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema Display] on usb-0000:00:1d.7-6.2/input0
>[    9.784163] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    9.784174] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    9.784177] hub 4-1:1.0: state 7 ports 3 chg 0002 evt 0000
>[    9.785904] hub 4-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>[    9.788035] usb 1-6.1: link qh256-0001/f72ba280 start 2 [1/0 us]
>[    9.861912] usb 4-1.1: new low speed USB device using uhci_hcd and address 3
>[    9.981918] usb 4-1.1: skipped 1 descriptor after interface
>[    9.981925] usb 4-1.1: skipped 1 descriptor after interface
>[    9.989912] usb 4-1.1: default language 0x0409
>[   10.001915] usb 4-1.1: udev 3, busnum 4, minor = 386
>[   10.001921] usb 4-1.1: New USB device found, idVendor=045e, idProduct=001d
>[   10.003229] usb 4-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[   10.004412] usb 4-1.1: Product: Microsoft Natural Keyboard Pro
>[   10.005629] usb 4-1.1: uevent
>[   10.005690] usb 4-1.1: usb_probe_device
>[   10.005693] usb 4-1.1: configuration #1 chosen from 1 choice
>[   10.020918] usb 4-1.1: adding 4-1.1:1.0 (config #1, interface 0)
>[   10.032924] usb 4-1.1:1.0: uevent
>[   10.033028] usbhid 4-1.1:1.0: usb_probe_interface
>[   10.033033] usbhid 4-1.1:1.0: usb_probe_interface - got id
>[   10.046424] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input8
>[   10.047617] uhci_hcd 0000:00:1d.2: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
>[   10.047761] generic-usb 0003:045E:001D.0006: input,hidraw5: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1/input0
>[   10.050180] usb 4-1.1: adding 4-1.1:1.1 (config #1, interface 1)
>[   10.061919] usb 4-1.1:1.1: uevent
>[   10.062013] usbhid 4-1.1:1.1: usb_probe_interface
>[   10.062019] usbhid 4-1.1:1.1: usb_probe_interface - got id
>[   10.083250] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input9
>[   10.084506] uhci_hcd 0000:00:1d.2: reserve dev 3 ep82-INT, period 8, phase 4, 87 us
>[   10.084647] generic-usb 0003:045E:001D.0007: input,hidraw6: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1/input1
>[   10.087070] hub 4-1:1.0: 336mA power budget left
>[   10.087074] hub 1-6.1:1.0: state 7 ports 4 chg 0010 evt 0000
>[   10.087400] hub 1-6.1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>[   10.156271] usb 1-6.1.4: new high speed USB device using ehci_hcd and address 9
>[   10.249646] usb 1-6.1.4: udev 9, busnum 1, minor = 8
>[   10.249652] usb 1-6.1.4: New USB device found, idVendor=050d, idProduct=706a
>[   10.251144] usb 1-6.1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   10.252494] usb 1-6.1.4: uevent
>[   10.252553] usb 1-6.1.4: usb_probe_device
>[   10.252556] usb 1-6.1.4: configuration #1 chosen from 1 choice
>[   10.254148] usb 1-6.1.4: adding 1-6.1.4:1.0 (config #1, interface 0)
>[   10.254182] usb 1-6.1.4:1.0: uevent
>[   10.254271] hub 1-6.1.4:1.0: usb_probe_interface
>[   10.254276] hub 1-6.1.4:1.0: usb_probe_interface - got id
>[   10.254281] hub 1-6.1.4:1.0: USB hub found
>[   10.256267] hub 1-6.1.4:1.0: 4 ports detected
>[   10.257638] hub 1-6.1.4:1.0: standalone hub
>[   10.257640] hub 1-6.1.4:1.0: ganged power switching
>[   10.257643] hub 1-6.1.4:1.0: global over-current protection
>[   10.257645] hub 1-6.1.4:1.0: Single TT
>[   10.257648] hub 1-6.1.4:1.0: TT requires at most 32 FS bit times (2664 ns)
>[   10.257651] hub 1-6.1.4:1.0: Port indicators are supported
>[   10.257654] hub 1-6.1.4:1.0: power on to power good time: 100ms
>[   10.258139] hub 1-6.1.4:1.0: local power source is good
>[   10.258144] hub 1-6.1.4:1.0: no over-current condition exists
>[   10.258149] hub 1-6.1.4:1.0: enabling power on all ports
>[   10.259432] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0002
>[   10.357149] usb 1-6.1.4: link qh256-0001/f72ba380 start 3 [1/0 us]
>[   10.357162] hub 1-6.1.4:1.0: state 7 ports 4 chg 0000 evt 0000
>[   13.876210] kjournald starting.  Commit interval 5 seconds
>[   13.876235] EXT3-fs: sda3: orphan cleanup on readonly fs
>[   13.900804] ext3_orphan_cleanup: deleting unreferenced inode 426035
>[   13.900870] ext3_orphan_cleanup: deleting unreferenced inode 425996
>[   13.943859] ext3_orphan_cleanup: deleting unreferenced inode 3458860
>[   13.943893] ext3_orphan_cleanup: deleting unreferenced inode 3458821
>[   13.953819] ext3_orphan_cleanup: deleting unreferenced inode 3461350
>[   13.954128] ext3_orphan_cleanup: deleting unreferenced inode 3461390
>[   13.954152] ext3_orphan_cleanup: deleting unreferenced inode 3462360
>[   13.954182] ext3_orphan_cleanup: deleting unreferenced inode 3462287
>[   13.963223] ext3_orphan_cleanup: deleting unreferenced inode 3719297
>[   13.979728] ext3_orphan_cleanup: deleting unreferenced inode 3694895
>[   13.979759] ext3_orphan_cleanup: deleting unreferenced inode 3686463
>[   13.988530] ext3_orphan_cleanup: deleting unreferenced inode 3457945
>[   13.988556] ext3_orphan_cleanup: deleting unreferenced inode 3457934
>[   14.000760] ext3_orphan_cleanup: deleting unreferenced inode 3542984
>[   14.001419] ext3_orphan_cleanup: deleting unreferenced inode 3543199
>[   14.002859] ext3_orphan_cleanup: deleting unreferenced inode 3543609
>[   14.016869] ext3_orphan_cleanup: deleting unreferenced inode 3496148
>[   14.016924] ext3_orphan_cleanup: deleting unreferenced inode 3493370
>[   14.022803] EXT3-fs: sda3: 18 orphan inodes deleted
>[   14.024143] EXT3-fs: recovery complete.
>[   14.220423] EXT3-fs: mounted filesystem with writeback data mode.
>[   14.221848] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>[   14.223048] Freeing unused kernel memory: 328k freed
>[   23.124319] udev: starting version 147
>[   23.153400] usb usb2: uevent
>[   23.153420] usb 2-0:1.0: uevent
>[   23.153474] usb usb3: uevent
>[   23.153492] usb 3-0:1.0: uevent
>[   23.153515] usb 3-1: uevent
>[   23.153534] usb 3-1:1.0: uevent
>[   23.153698] usb usb4: uevent
>[   23.153718] usb 4-0:1.0: uevent
>[   23.153740] usb 4-1: uevent
>[   23.153761] usb 4-1.1: uevent
>[   23.153780] usb 4-1.1:1.0: uevent
>[   23.153899] usb 4-1.1:1.1: uevent
>[   23.154032] usb 4-1:1.0: uevent
>[   23.154085] usb usb5: uevent
>[   23.154103] usb 5-0:1.0: uevent
>[   23.154125] usb 5-1: uevent
>[   23.154144] usb 5-1:1.0: uevent
>[   23.154254] usb 5-1:1.1: uevent
>[   23.154379] usb 5-2: uevent
>[   23.154399] usb 5-2:1.0: uevent
>[   23.154486] usb usb1: uevent
>[   23.154504] usb 1-0:1.0: uevent
>[   23.154526] usb 1-6: uevent
>[   23.154546] usb 1-6.1: uevent
>[   23.154567] usb 1-6.1.4: uevent
>[   23.154589] usb 1-6.1.4:1.0: uevent
>[   23.154611] usb 1-6.1:1.0: uevent
>[   23.154634] usb 1-6.2: uevent
>[   23.154653] usb 1-6.2:1.0: uevent
>[   23.154711] usb 1-6:1.0: uevent
>[   23.204068] usb usb2: uevent
>[   23.205027] usb usb4: uevent
>[   23.205626] usb usb5: uevent
>[   23.206591] usb usb1: uevent
>[   23.207183] usb usb3: uevent
>[   23.210089] usb 4-1: uevent
>[   23.210998] usb 1-6: uevent
>[   23.213266] usb 1-6.2: uevent
>[   23.213613] usb 3-1: uevent
>[   23.213763] usb 1-6.1: uevent
>[   23.214397] usb 4-1.1: uevent
>[   23.217011] usb 5-2: uevent
>[   23.221316] usb 5-1: uevent
>[   23.246805] usb 4-1.1:1.1: uevent
>[   23.246909] usb 4-1.1: uevent
>[   23.247962] usb 3-1:1.0: uevent
>[   23.248065] usb 3-1: uevent
>[   23.248702] usb 4-1.1:1.0: uevent
>[   23.248799] usb 4-1.1: uevent
>[   23.248996] usb 3-1:1.0: uevent
>[   23.249105] usb 3-1: uevent
>[   23.249749] usb 1-6.1.4: uevent
>[   23.652100] cfg80211: Calling CRDA to update world regulatory domain
>[   23.726701] input: PC Speaker as /devices/platform/pcspkr/input/input10
>[   23.859169] usb 4-1.1:1.1: uevent
>[   23.860344] usb 4-1.1:1.0: uevent
>[   23.861232] usb 3-1:1.0: uevent
>[   23.862106] usb 3-1:1.0: uevent
>[   24.030927] usb 5-1: uevent
>[   24.043604] usb 5-1: uhci_result_common: failed with status 440000
>[   24.043630] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
>[   24.045592] usb 5-1: uhci_result_common: failed with status 440000
>[   24.045601] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.046520] usb 5-1:1.0: uevent
>[   24.046626] usb 5-1: uevent
>[   24.050267] usb 5-1:1.0: uevent
>[   24.050918] usb 5-1:1.1: uevent
>[   24.051016] usb 5-1: uevent
>[   24.051915] usb 5-1:1.1: uevent
>[   24.052004] usb 5-1: uevent
>[   24.052938] usb 5-1:1.1: uevent
>[   24.053139] usb 5-1:1.1: uevent
>[   24.060036] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.063601] usb 5-1: uhci_result_common: failed with status 440000
>[   24.063615] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.079519] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80
>[   24.079532] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>[   24.079542] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
>[   24.088037] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.091605] usb 5-1: uhci_result_common: failed with status 440000
>[   24.091618] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.140038] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.143606] usb 5-1: uhci_result_common: failed with status 440000
>[   24.143618] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.174652] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[   24.174665] ath5k 0000:02:00.0: setting latency timer to 64
>[   24.174696] ath5k 0000:02:00.0: registered as 'phy0'
>[   24.244015] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.247595] usb 5-1: uhci_result_common: failed with status 440000
>[   24.247603] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.301546] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
>[   24.303536] ath: EEPROM regdomain: 0x65
>[   24.303538] ath: EEPROM indicates we should expect a direct regpair map
>[   24.303542] ath: Country alpha2 being used: 00
>[   24.303544] ath: Regpair used: 0x65
>[   24.348038] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.351612] usb 5-1: uhci_result_common: failed with status 440000
>[   24.351625] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
>[   24.356326] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[   24.356337] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>[   24.356345] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[   24.412045] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>[   24.412083] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[   24.412095] uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
>[   24.412111] hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
>[   24.412117] usb 5-1: USB disconnect, address 2
>[   24.412121] usb 5-1: unregistering device
>[   24.412126] usb 5-1: usb_disable_device nuking all URBs
>[   24.412135] usb 5-1: unregistering interface 5-1:1.0
>[   24.436242] usb 5-1:1.0: uevent
>[   24.436267] usb 5-1: unregistering interface 5-1:1.1
>[   24.464241] usb 5-1:1.1: uevent
>[   24.464373] usb 5-1: uevent
>[   24.511883] phy0: Selected rate control algorithm 'minstrel'
>[   24.512196] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
>[   24.592047] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[   24.704092] usb 5-1: new full speed USB device using uhci_hcd and address 4
>[   24.902647] usb 5-1: skipped 1 descriptor after interface
>[   24.902652] usb 5-1: udev 4, busnum 5, minor = 515
>[   24.902656] usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
>[   24.902659] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   24.902742] usb 5-1: uevent
>[   24.902762] usb 5-1: usb_probe_device
>[   24.902765] usb 5-1: configuration #1 chosen from 1 choice
>[   24.903908] usb 5-1: uevent
>[   24.906642] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[   24.906677] usb 5-1:1.0: uevent
>[   24.906730] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>[   24.906748] usb 5-1:1.1: uevent
>[   24.906783] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
>[   24.906800] usb 5-1:1.2: uevent
>[   24.906833] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
>[   25.276102] EXT3 FS on sda3, internal journal
>[   31.515655] Adding 1999992k swap on /swapfile.  Priority:-1 extents:507 across:2517020k 
>[   34.423176] usb usb2: uevent
>[   34.423280] usb 2-0:1.0: uevent
>[   34.423461] usb usb3: uevent
>[   34.423558] usb 3-0:1.0: uevent
>[   34.423630] usb 3-1: uevent
>[   34.423726] usb 3-1:1.0: uevent
>[   34.424640] usb usb4: uevent
>[   34.424736] usb 4-0:1.0: uevent
>[   34.424801] usb 4-1: uevent
>[   34.424898] usb 4-1.1: uevent
>[   34.424994] usb 4-1.1:1.0: uevent
>[   34.425462] usb 4-1.1:1.1: uevent
>[   34.425859] usb 4-1:1.0: uevent
>[   34.426024] usb usb5: uevent
>[   34.426120] usb 5-0:1.0: uevent
>[   34.426181] usb 5-1: uevent
>[   34.426275] usb 5-1:1.0: uevent
>[   34.426407] usb 5-1:1.1: uevent
>[   34.426481] usb 5-1:1.2: uevent
>[   34.426541] usb 5-2: uevent
>[   34.426637] usb 5-2:1.0: uevent
>[   34.426923] usb usb1: uevent
>[   34.427019] usb 1-0:1.0: uevent
>[   34.427080] usb 1-6: uevent
>[   34.427177] usb 1-6.1: uevent
>[   34.427289] usb 1-6.1.4: uevent
>[   34.427386] usb 1-6.1.4:1.0: uevent
>[   34.427448] usb 1-6.1:1.0: uevent
>[   34.427510] usb 1-6.2: uevent
>[   34.427605] usb 1-6.2:1.0: uevent
>[   34.427857] usb 1-6:1.0: uevent
>[   44.488610] i2c-adapter i2c-2: unable to read EDID block.
>[   44.488614] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   44.807599] i2c-adapter i2c-2: unable to read EDID block.
>[   44.807604] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   45.161613] [drm] TV-10: set mode NTSC 480i 0
>[   45.301589] [drm] TV-10: set mode NTSC 480i 0
>[   45.441531] i2c-adapter i2c-2: unable to read EDID block.
>[   45.441535] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   45.759161] i2c-adapter i2c-2: unable to read EDID block.
>[   45.759164] i915 0000:00:02.0: DVI-D-1: no EDID data
>[   46.112711] [drm] TV-10: set mode NTSC 480i 0
>[   46.252691] [drm] TV-10: set mode NTSC 480i 0
>[   47.157328] [drm] TMDS-8: set mode 1680x1050 17
>[   51.109069] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us

Actions: View

Attachments on bug 24538: 30430 | 30434 | 31785 | 31786

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.