Attachment 27499 Details for Bug 22674 – dmesg from last good commit

dmesg from last good commit

dmesg.KMS_good (text/plain), 15.08 KB, created by Andre on 2009-07-08 09:01:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andre

Created: 2009-07-08 09:01:13 UTC

Size: 15.08 KB

patch

obsolete

>p c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 974 pages used for memmap
>  Normal zone: 123666 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>nr_irqs_gsi: 16
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127633
>Kernel command line: root=/dev/hda1 resume=/dev/hda4 lapic hpet=force usbcore.autosuspend=1 
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>NR_IRQS:288
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1295.695 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 506580k/514944k available (2025k kernel code, 7800k reserved, 853k data, 256k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffaa000 - 0xfffff000   ( 340 kB)
>    vmalloc : 0xdfee0000 - 0xfffa8000   ( 512 MB)
>    lowmem  : 0xc0000000 - 0xdf6e0000   ( 502 MB)
>      .init : 0xc03d2000 - 0xc0412000   ( 256 kB)
>      .data : 0xc02fa431 - 0xc03cf968   ( 853 kB)
>      .text : 0xc0100000 - 0xc02fa431   (2025 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2591.39 BogoMIPS (lpj=1295695)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 512K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Celeron(R) M processor         1300MHz stepping 05
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090320
>ACPI: setting ELCR to 0200 (from 0800)
>net_namespace: 544 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
>pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
>pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff]
>pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:08.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
>pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f]
>pci 0000:02:08.0: supports D1 D2
>pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:08.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
>pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x167f has been reserved
>pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:00.0:   IO window: 0x003000-0x0030ff
>pci 0000:02:00.0:   IO window: 0x003400-0x0034ff
>pci 0000:02:00.0:   PREFETCH window: 0xf0000000-0xf3ffffff
>pci 0000:02:00.0:   MEM window: 0xd4000000-0xd7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x3000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xd0200000-0xdfffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
>pci 0000:00:1e.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x3000-0x7fff]
>pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
>pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x30ff]
>pci_bus 0000:03: resource 1 io:  [0x3400-0x34ff]
>pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
>pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x35 set to 0x1
>msgmni has been set to 989
>alg: No test for stdrng (krng)
>io scheduler noop registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>Switched to high resolution mode on CPU 0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (51 C)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 855GM Chipset
>agpgart-intel 0000:00:00.0: detected 8060K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>[drm] Initialized drm 1.1.0 20060810
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01)
>PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817
>    ide1: BM-DMA at 0x1818-0x181f
>Probing IDE interface ide0...
>ACPI: Battery Slot [BAT0] (battery present)
>hda: FUJITSU MHT2030AT, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>hda: max request size: 128KiB
>hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=62016/15/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100 0000:02:08.0: PME# disabled
>e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:0a:e4:2d:b5:57
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>cpuidle: using governor ladder
>cpuidle: using governor menu
>thinkpad_acpi: ThinkPad ACPI Extras v0.23
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 1WET84WW (2.04 ), EC 1VHT28WW-1.04
>thinkpad_acpi: IBM ThinkPad R50e, model 18348RG
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>input: ThinkPad Extra Buttons as /devices/virtual/input/input3
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 3:1.
>Freeing unused kernel memory: 256k freed
>udev: starting version 141
>Real Time Clock Driver v1.12b
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input5
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ide-cd driver 5.00
>ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>i915 0000:00:02.0: setting latency timer to 64
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i915 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>allocated 1024x768 fb: 0x007ff000, bo de4e3960
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>Clocksource tsc unstable (delta = -249978851 ns)
>intel8x0_measure_ac97_clock: measured 50815 usecs (11 samples)
>intel8x0: measured clock 216 rejected
>intel8x0_measure_ac97_clock: measured 50856 usecs (2451 samples)
>intel8x0: clocking to 48000
>hdc: UDMA/33 mode selected
>EXT3 FS on hda1, internal journal
>kjournald starting.  Commit interval 600 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>REISERFS (device hda3): found reiserfs format "3.6" with standard journal
>REISERFS (device hda3): using ordered data mode
>REISERFS (device hda3): journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device hda3): checking transaction log (hda3)
>REISERFS (device hda3): Using r5 hash to sort names
>Adding 506512k swap on /dev/hda4.  Priority:-1 extents:1 across:506512k

Actions: View

Attachments on bug 22674: 27499 | 27500 | 27501 | 27560 | 27561 | 27774 | 27775 | 27777 | 28056

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.