Attachment 26816 Details for Bug 22298 – dmesg

dmesg

kms_bug.txt (text/plain), 30.66 KB, created by Rafał Lorek on 2009-06-15 10:25:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rafał Lorek

Created: 2009-06-15 10:25:26 UTC

Size: 30.66 KB

patch

obsolete

>Linux version 2.6.30-desktop-1mnb (herton@n2.mandriva.com) (gcc version 4.4.0 (GCC) ) #1 SMP Fri Jun 12 03:32:31 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f7df000 (usable)
> BIOS-e820: 000000001f7e0000 - 000000001f7fffc0 (ACPI data)
> BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x1f7df max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 01F800000 mask FFF800000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>init_memory_mapping: 0000000000000000-000000001f7df000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 001f400000 page 2M
> 001f400000 - 001f7df000 page 4k
>kernel direct mapping tables up to 1f7df000 @ 7000-c000
>RAMDISK: 1f42f000 - 1f7ceec9
>ACPI: RSDP 000e5010 00014 (v00 INSYDE)
>ACPI: RSDT 1f7fb754 00038 (v01 INSYDE RSDT_000 00000100 ABCD 00010200)
>ACPI: FACP 1f7ffa80 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
>ACPI: DSDT 1f7fb970 0410D (v01 INSYDE SONOMA   00000001 INTL 02002036)
>ACPI: FACS 1f7fffc0 00040
>ACPI: APIC 1f7ffb10 00068 (v01 STUPID MAPIC_00 30307830 ABCD 00010200)
>ACPI: HPET 1f7ffb80 00038 (v01 INSYDE HPET_000 30303030 0000 30303030)
>ACPI: MCFG 1f7ffbc0 0003C (v01 INSYDE MCFG_000 30303030 0000 30303030)
>ACPI: SSDT 1f7fb78c 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>503MB LOWMEM available.
>  mapped low ram: 0 - 1f7df000
>  low ram: 0 - 1f7df000
>  node 0 low ram: 00000000 - 1f7df000
>  node 0 bootmap 00002000 - 00005efc
>(9 early reservations) ==> bootmem [0000000000 - 001f7df000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 00006f8c64]    TEXT DATA BSS ==> [0000100000 - 00006f8c64]
>  #4 [001f42f000 - 001f7ceec9]          RAMDISK ==> [001f42f000 - 001f7ceec9]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [00006f9000 - 00006fc198]              BRK ==> [00006f9000 - 00006fc198]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0001f7df
>  HighMem  0x0001f7df -> 0x0001f7df
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001f7df
>On node 0 totalpages: 128894
>free_area_init_node: node 0, pgdat c059a4e0, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 976 pages used for memmap
>  Normal zone: 123919 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 1f800000:e0700000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 12 pages at c13f2000, static data 25052 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127886
>Kernel command line: BOOT_IMAGE=alt_desktop_2.6.30-1mnb root=UUID=2d0612a6-a02b-11dd-b2a8-7f0b0322f6a1 resume=UUID=2be9baa6-d424-476a-9ad8-f9f4a24d7dd4 splash=silent vga=788
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>NR_IRQS:1280
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Fast TSC calibration using PIT
>Detected 1595.852 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 500964k/515964k available (3247k kernel code, 14412k reserved, 1687k data, 436k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe15000 - 0xfffff000   (1960 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdffdf000 - 0xff7fe000   ( 504 MB)
>    lowmem  : 0xc0000000 - 0xdf7df000   ( 503 MB)
>      .init : 0xc05d9000 - 0xc0646000   ( 436 kB)
>      .data : 0xc042bed4 - 0xc05d1e28   (1687 kB)
>      .text : 0xc0100000 - 0xc042bed4   (3247 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.70 BogoMIPS (lpj=1595852)
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20090320
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Celeron(R) M processor         1.60GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (3191.70 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>net_namespace: 1088 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:42:16  Date: 06/15/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xea304, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd007ffff]
>pci 0000:00:02.0: reg 14 io port: [0xe000-0xe007]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xa0000000-0xafffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0080000-0xd00bffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xd0100000-0xd017ffff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0180000-0xd0183fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f]
>pci 0000:00:1d.1: reg 20 io port: [0x1220-0x123f]
>pci 0000:00:1d.2: reg 20 io port: [0x1240-0x125f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH6 GPIO
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0x1100-0x110f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f]
>pci 0000:01:02.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:01:02.0: supports D1 D2
>pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:02.0: PME# disabled
>pci 0000:01:02.2: reg 10 32bit mmio: [0xfedff800-0xfedfffff]
>pci 0000:01:02.2: reg 14 32bit mmio: [0xcc00c000-0xcc00ffff]
>pci 0000:01:02.2: supports D1 D2
>pci 0000:01:02.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:02.2: PME# disabled
>pci 0000:01:04.0: reg 10 io port: [0xc000-0xc0ff]
>pci 0000:01:04.0: reg 14 32bit mmio: [0xcc002000-0xcc0020ff]
>pci 0000:01:04.0: supports D1 D2
>pci 0000:01:04.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:04.0: PME# disabled
>pci 0000:01:05.0: reg 10 32bit mmio: [0xcc000000-0xcc001fff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xcc000000-0xcfffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0x9c000000-0x9fffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved
>system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:05: ioport range 0x3e0-0x3e1 has been reserved
>system 00:05: ioport range 0x3f8-0x3ff has been reserved
>system 00:05: ioport range 0x600-0x60f has been reserved
>system 00:05: ioport range 0x680-0x6ff has been reserved
>system 00:05: ioport range 0x800-0x80f has been reserved
>system 00:05: ioport range 0x1000-0x107f has been reserved
>system 00:05: ioport range 0x1180-0x11bf has been reserved
>system 00:05: ioport range 0x1640-0x164f has been reserved
>system 00:05: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:05: iomem range 0xf0008000-0xf000bfff has been reserved
>system 00:05: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:05: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:05: iomem range 0xfed19000-0xfed19fff has been reserved
>pci 0000:01:02.0: CardBus bridge, secondary bus 0000:02
>pci 0000:01:02.0:   IO window: 0x00c400-0x00c4ff
>pci 0000:01:02.0:   IO window: 0x00c800-0x00c8ff
>pci 0000:01:02.0:   PREFETCH window: 0x9c000000-0x9fffffff
>pci 0000:01:02.0:   MEM window: 0x24000000-0x27ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: 0xc000-0xdfff
>pci 0000:00:1e.0:   MEM window: 0xcc000000-0xcfffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x0000009c000000-0x0000009fffffff
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:01:02.0: power state changed by ACPI to D0
>pci 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xcc000000-0xcfffffff]
>pci_bus 0000:01: resource 2 pref mem [0x9c000000-0x9fffffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0xc400-0xc4ff]
>pci_bus 0000:02: resource 1 io:  [0xc800-0xc8ff]
>pci_bus 0000:02: resource 2 pref mem [0x9c000000-0x9fffffff]
>pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 3711k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1245062536.306:1): initialized
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 986
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>vesafb: framebuffer at 0xa0000000, mapped to 0xe0080000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>PM: Checking image partition UUID=2be9baa6-d424-476a-9ad8-f9f4a24d7dd4
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input1
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 13:868:729
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 436k freed
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: PCI INT B disabled
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>ata1.00: ATA-7: FUJITSU MHV2060AT PL, 000000A0, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2.01: NODEV after polling detection
>ata2.00: ATAPI: QSI     DVD+/-RW SDW-082K, PX45, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            QSI      DVD+-RW SDW-082K PX45 PQ: 0 ANSI: 5
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>ohci1394 0000:01:02.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>Tomoyo security MAC extension available but disabled by default. If you want to
>enable and use it, ccs-tools package must be installed.
>udev: starting version 142
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input2
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (53 C)
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: Battery Slot [BAT0] (battery present)
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
>ACPI: Sleep Button [SBTN]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>ACPI: Lid Switch [LID]
>Clocksource tsc unstable (delta = -151432059 ns)
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001200
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.30-desktop-1mnb uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001220
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.30-desktop-1mnb uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001240
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.30-desktop-1mnb uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>Linux agpgart interface v0.103
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x20000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.30-desktop-1mnb ehci_hcd
>usb usb4: SerialNumber: 0000:00:1d.7
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>Non-volatile memory driver v1.3
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>EXT3 FS on sda1, internal journal
>yenta_cardbus 0000:01:02.0: CardBus bridge found [1071:8048]
>yenta_cardbus 0000:01:02.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:01:02.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:01:02.0: TI: mfunc 0x01ac1b22, devctl 0x64
>yenta_cardbus 0000:01:02.0: ISA IRQ mask 0x0cf8, PCI irq 17
>yenta_cardbus 0000:01:02.0: Socket status: 30000006
>pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #02 to #05
>yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean.
>yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge Memory window: 0xcc000000 - 0xcfffffff
>yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge Memory window: 0x9c000000 - 0x9fffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>cfg80211: Calling CRDA to update world regulatory domain
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:01:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xe04fe000, 00:40:d0:92:25:e8, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>rt2500pci 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>phy0: Selected rate control algorithm 'minstrel'
>Registered led device: rt2500pci-phy0::radio
>Registered led device: rt2500pci-phy0::quality
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC260, trying auto-probe from BIOS...
>autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
>   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x18/0x0
>   inputs: mic=0x12, fmic=0x0, line=0x0, fline=0x0, cd=0x16, aux=0x0
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>ondemand governor failed, too long transition latency of HW, fallback to performance governor
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ppdev: user-space parallel port driver
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>input: rt2500pci as /devices/pci0000:00/0000:00:1e.0/0000:01:05.0/input/input8
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>wlan0: authenticate with AP 00:1b:2f:5c:15:b6
>wlan0: authenticated
>wlan0: associate with AP 00:1b:2f:5c:15:b6
>wlan0: RX AssocResp from 00:1b:2f:5c:15:b6 (capab=0x431 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>padlock: VIA PadLock not detected.
>fuse init (API version 7.11)
>wlan0: no IPv6 routers present
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>mtrr: no MTRR for a0000000,10000000 found
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>mtrr: no MTRR for a0000000,10000000 found
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>mtrr: no MTRR for a0000000,10000000 found
>mtrr: MTRR 2 not used
>[drm] Module unloaded
>i915: Unknown parameter `debug'
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized drm 1.1.0 20060810
>[drm:drm_init] 
>[drm:drm_get_dev] 
>i915 0000:00:02.0: setting latency timer to 64
>[drm:drm_get_minor] 
>[drm:drm_get_minor] new minor assigned 64
>[drm:drm_get_minor] 
>[drm:drm_get_minor] new minor assigned 0
>[drm:i915_init_phys_hws] Enabled hardware status page
>[drm:drm_agp_bind_pages] 
>[drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 68940 1280 1296 1344 1408 800 801 804 816 0x8 0x0
>[drm:drm_irq_install] irq=16
>[drm:intel_modeset_init] 2 display pipes available.
>[drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>[drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:drm_sysfs_connector_add] adding "SVIDEO-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:drm_helper_probe_single_connector_modes] VGA-1
>[drm:drm_helper_probe_single_connector_modes] VGA-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes] LVDS-1
>i2c-adapter i2c-2: unable to read EDID block.
>i915 0000:00:02.0: LVDS-1: no EDID data
>[drm:drm_helper_probe_single_connector_modes] Probed modes for LVDS-1
>[drm:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60003 68940 1280 1296 1344 1408 800 801 804 816 0x8 0x0
>[drm:drm_helper_probe_single_connector_modes] SVIDEO-1
>[drm:intel_tv_detect_type] Detected Component TV connection
>[drm:drm_helper_probe_single_connector_modes] Probed modes for SVIDEO-1
>[drm:drm_mode_debug_printmodeline] Modeline 24:"1024x768" 29968 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 29968 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 25:"848x480" 29966 14513 848 849 912 944 480 481 512 513 0x40 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 22:"640x480" 29966 11315 640 641 704 736 480 481 512 513 0x40 0x0
>[drm:drm_setup_crtcs] 
>[drm:drm_enable_connectors] connector 5 enabled? no
>[drm:drm_enable_connectors] connector 7 enabled? yes
>[drm:drm_enable_connectors] connector 10 enabled? yes
>[drm:drm_target_preferred] looking for preferred mode on connector 7
>[drm:drm_target_preferred] found mode 1280x800
>[drm:drm_target_preferred] looking for preferred mode on connector 10
>[drm:drm_target_preferred] found mode 1024x768
>[drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config
>[drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 4
>[drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 3
>[drm:intelfb_probe] 
>[drm:intelfb_single_fb_probe] 
>[drm:intelfb_single_fb_probe] creating new fb (console size 1024x768, buffer size 1280x800)
>[drm:drm_agp_bind_pages] 
>allocated 1280x800 fb: 0x007df000, bo d971df60
>fb1: inteldrmfb frame buffer device
>registered panic notifier
>[drm:intel_opregion_init] graphic opregion physical addr: 0x0
>[drm:intel_opregion_init] ACPI OpRegion not supported!
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

Actions: View

Attachments on bug 22298: 26816

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.