Attachment 26728 Details for Bug 22241 – Fedora 11 dmesg output (during/after hang)

Fedora 11 dmesg output (during/after hang)

dmesg-Fedora11-June-12.txt (text/plain), 48.84 KB, created by Hezekiah M. Carty on 2009-06-12 09:14:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hezekiah M. Carty

Created: 2009-06-12 09:14:58 UTC

Size: 48.84 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29.4-167.fc11.x86_64 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Wed May 27 17:27:08 EDT 2009
>Command line: ro root=UUID=716f8373-24ed-42fb-be3e-3296aba379f7 rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
> BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
> BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
> BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>DMI present.
>last_pfn = 0x13c000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 3GB, range: 1GB, type UC
>reg 1, base: 5056MB, range: 64MB, type UC
>reg 2, base: 0GB, range: 4GB, type WB
>reg 3, base: 4GB, range: 1GB, type WB
>reg 4, base: 3063MB, range: 1MB, type UC
>reg 5, base: 3064MB, range: 8MB, type UC
>total RAM coverred: 4023M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3063MB, range: 1MB, type UC
>reg 3, base: 3064MB, range: 8MB, type UC
>reg 4, base: 4GB, range: 1GB, type WB
>reg 5, base: 5056MB, range: 64MB, type UC
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xbf6b0 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000bf6b0000
> 0000000000 - 00bf600000 page 2M
> 00bf600000 - 00bf6b0000 page 4k
>kernel direct mapping tables up to bf6b0000 @ 8000-d000
>last_map_addr: bf6b0000 end: bf6b0000
>init_memory_mapping: 0000000100000000-000000013c000000
> 0100000000 - 013c000000 page 2M
>kernel direct mapping tables up to 13c000000 @ b000-11000
>last_map_addr: 13c000000 end: 13c000000
>RAMDISK: 37cbe000 - 37fefc68
>ACPI: RSDP 000F68C0, 0024 (r2 LENOVO)
>ACPI: XSDT BF6BB647, 0094 (r1 LENOVO TP-7L        2250  LTP        0)
>ACPI: FACP BF6BB700, 00F4 (r3 LENOVO TP-7L        2250 LNVO        1)
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
>ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT BF6BBB1D, 10009 (r1 LENOVO TP-7L        2250 MSFT  3000000)
>ACPI: FACS BF6E4000, 0040
>ACPI: SSDT BF6BB8B4, 0269 (r1 LENOVO TP-7L        2250 MSFT  3000000)
>ACPI: ECDT BF6CBB26, 0052 (r1 LENOVO TP-7L        2250 LNVO        1)
>ACPI: TCPA BF6CBB78, 0032 (r2 LENOVO TP-7L        2250 LNVO        1)
>ACPI: APIC BF6CBBAA, 0068 (r1 LENOVO TP-7L        2250 LNVO        1)
>ACPI: MCFG BF6CBC12, 003C (r1 LENOVO TP-7L        2250 LNVO        1)
>ACPI: HPET BF6CBC4E, 0038 (r1 LENOVO TP-7L        2250 LNVO        1)
>ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7L        2250  LTP        0)
>ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7L        2250  LTP        1)
>ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7L        2250 PTL         1)
>ACPI: SSDT BF6E26D9, 025F (r1 LENOVO TP-7L        2250 INTL 20050513)
>ACPI: SSDT BF6E2938, 00A6 (r1 LENOVO TP-7L        2250 INTL 20050513)
>ACPI: SSDT BF6E29DE, 04F7 (r1 LENOVO TP-7L        2250 INTL 20050513)
>ACPI: SSDT BF6E2ED5, 01D8 (r1 LENOVO TP-7L        2250 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad R61
>ACPI: Added _OSI(Linux)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000013c000000
>Bootmem setup node 0 0000000000000000-000000013c000000
>  NODE_DATA [000000000000c000 - 0000000000020fff]
>  bootmap [0000000000021000 -  00000000000487ff] pages 28
>(7 early reservations) ==> bootmem [0000000000 - 013c000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000ac700c]    TEXT DATA BSS ==> [0000200000 - 0000ac700c]
>  #3 [0037cbe000 - 0037fefc68]          RAMDISK ==> [0037cbe000 - 0037fefc68]
>  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>  #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
>found SMP MP-table at [ffff8800000f68f0] 000f68f0
> [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0013c000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009d
>    0: 0x00000100 -> 0x000bf6b0
>    0: 0x00100000 -> 0x0013c000
>On node 0 totalpages: 1029709
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2354 pages reserved
>  DMA zone: 1587 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 765672 pages, LIFO batch:31
>  Normal zone: 3360 pages used for memmap
>  Normal zone: 242400 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000
>PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000
>PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
>PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
>PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
>PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
>PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
>NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 57344 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009659
>Policy zone: Normal
>Kernel command line: ro root=UUID=716f8373-24ed-42fb-be3e-3296aba379f7 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2194.643 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 41943040 bytes of page_cgroup
>please try cgroup_disable=memory option if you don't want
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 3941824k/5177344k available (3786k kernel code, 1058508k absent, 177012k reserved, 2294k data, 1304k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.28 BogoMIPS (lpj=2194643)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 18888 entries in 149 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194390)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 358996 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (8778.06 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5880 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 1904 bytes
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 14:06:50  Date: 06/12/09
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query honored via DMI
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff]
>pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff]
>pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
>pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f]
>pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
>pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
>pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
>pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
>pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
>pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xdf3ff000-0xdf3fffff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
>pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
>pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff]
>pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
>pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
>pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
>pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff]
>pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff]
>pci 0000:15:00.0: supports D1 D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.0: PME# disabled
>pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff]
>pci 0000:15:00.1: supports D1 D2
>pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.1: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x7000-0xafff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
>system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xdc000000-0xdf3fffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
>pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
>pci 0000:00:1c.3:   MEM window: 0xd4000000-0xd5ffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000df800000-0x000000df8fffff
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.4:   IO window: 0x6000-0x6fff
>pci 0000:00:1c.4:   MEM window: 0xd0000000-0xd1ffffff
>pci 0000:00:1c.4:   PREFETCH window: 0x000000df500000-0x000000df5fffff
>pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
>pci 0000:15:00.0:   IO window: 0x007000-0x0070ff
>pci 0000:15:00.0:   IO window: 0x007400-0x0074ff
>pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
>pci 0000:15:00.0:   MEM window: 0xc4000000-0xc7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
>pci 0000:00:1e.0:   IO window: 0x7000-0xafff
>pci 0000:00:1e.0:   MEM window: 0xf8300000-0xfbffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
>  alloc irq_desc for 20 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 21 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 22 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.2: setting latency timer to 64
>  alloc irq_desc for 23 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>  alloc irq_desc for 16 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
>pci_bus 0000:02: resource 2 mem: [0xf8000000-0xf80fffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff]
>pci_bus 0000:03: resource 2 mem: [0xdfe00000-0xdfefffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
>pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
>pci_bus 0000:04: resource 2 mem: [0xdfb00000-0xdfbfffff]
>pci_bus 0000:04: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 io:  [0x5000-0x5fff]
>pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff]
>pci_bus 0000:05: resource 2 mem: [0xdf800000-0xdf8fffff]
>pci_bus 0000:05: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0d: resource 0 io:  [0x6000-0x6fff]
>pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff]
>pci_bus 0000:0d: resource 2 mem: [0xdf500000-0xdf5fffff]
>pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
>pci_bus 0000:15: resource 0 io:  [0x7000-0xafff]
>pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff]
>pci_bus 0000:15: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:16: resource 0 io:  [0x7000-0x70ff]
>pci_bus 0000:16: resource 1 io:  [0x7400-0x74ff]
>pci_bus 0000:16: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3271k freed
>Simple Boot Flag at 0x35 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1244815610.429:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7705
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 24 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 25 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>  alloc irq_desc for 26 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>  alloc irq_desc for 27 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>  alloc irq_desc for 28 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: Using ACPI for slot detection.
>pciehp 0000:00:1c.3:pcie02: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0
>pciehp 0000:00:1c.3:pcie02: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp_glue: Slot 1 already registered by another hotplug driver
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: SSDT BF6E1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BF6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (57 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (55 C)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>Fixed MDIO Bus: probed
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>  alloc irq_desc for 29 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 29
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 29
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-8: HITACHI HTS722016K9SA00, DCDZC75A, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72201 DCDZ PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata3: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
>ata4.00: ATAPI: MATSHITADVD-RAM UJ-850 z, RB21, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850 z RB21 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>ata5: port disabled. ignoring.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>  alloc irq_desc for 19 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>  alloc irq_desc for 17 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>  alloc irq_desc for 18 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.29.4-167.fc11.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 13:449:131
>acpi device:06: hash matches
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1304k freed
>Write protecting the kernel read-only data: 1844k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>  alloc irq_desc for 30 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>i915 0000:00:02.0: irq 30 for MSI/MSI-X
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>Clocksource tsc unstable (delta = -166985249 ns)
>usb 5-2: New USB device found, idVendor=045e, idProduct=0040
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Microsoft Wheel Mouse Optical®
>usb 5-2: Manufacturer: Microsoft
>usb 5-2: configuration #1 chosen from 1 choice
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2/input0
>allocated 1440x1024 fb: 0x007df000, bo ffff880139be3840
>Console: switching to colour frame buffer device 160x56
>[drm] DAC-6: set mode 1280x1024 24
>[drm] LVDS-8: set mode 1440x900 26
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>acpi device:03: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1244815613.812:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 123719 rules.
>SELinux: 8192 avtab hash slots, 123719 rules.
>SELinux:  8 users, 11 roles, 2722 types, 127 bools, 1 sens, 1024 cats
>SELinux:  74 classes, 123719 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1244815614.038:3): policy loaded auid=4294967295 ses=4294967295
>udev: starting version 141
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>  alloc irq_desc for 31 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>ACPI: WMI: Mapper loaded
>cfg80211: Calling CRDA to update world regulatory domain
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:cc:42
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1008ff-0ff
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>  alloc irq_desc for 32 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
>wmaster0 (iwl3945): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>wlan0 (iwl3945): not using net_device_ops yet
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>thinkpad_acpi: ThinkPad ACPI Extras v0.22
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
>thinkpad_acpi: Lenovo ThinkPad R61, model 7732CTO
>thinkpad_acpi: ACPI backlight control delay disabled
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
>input: ThinkPad Extra Buttons as /devices/virtual/input/input9
>yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
>yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:15:00.0: Socket status: 30000006
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
>firewire_core: created device fw0: GUID 00061b032a273498, S400
>cfg80211: Calling CRDA for country: US
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>cfg80211: Regulatory domain changed to country: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>swap_cgroup: uses 30656 bytes of vmalloc for pointer array space and 15695872 bytes to hold mem_cgroup pointers on swap
>swap_cgroup can be disabled by noswapaccount boot option.
>Adding 7847744k swap on /dev/sda4.  Priority:-1 extents:1 across:7847744k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>[drm] DAC-6: set mode 1024x768 d
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 loaded firmware version 15.32.2.9
>[drm] LVDS-8: set mode 1024x768 e
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>audit(1244815638.778:26975): arch=c000003e syscall=2 success=yes exit=3 a0=7f99003ad7e5 a1=0 a2=0 a3=7fff083aaad8 items=1 ppid=1976 pid=1977 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-power-man" exe="/usr/bin/gnome-power-manager" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
>audit(1244815638.778:26975):  cwd="/"
>audit(1244815638.778:26975): item=0 name="/usr/lib64/libXcursor.so.1" inode=336672 dev=08:01 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:lib_t:s0
>audit(1244815638.778:26975): 
>audit(1244815638.778:26976): arch=c000003e syscall=2 success=yes exit=3 a0=7f99003ad83a a1=0 a2=0 a3=7fff083aaaa8 items=1 ppid=1976 pid=1977 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-power-man" exe="/usr/bin/gnome-power-manager" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
>audit(1244815638.778:26976):  cwd="/"
>audit(1244815638.778:26976): item=0 name="/usr/lib64/libXcomposite.so.1" inode=336673 dev=08:01 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:lib_t:s0
>audit(1244815638.778:26976): 
>audit(1244815638.778:26977): arch=c000003e syscall=2 success=yes exit=3 a0=7f99003ad793 a1=0 a2=0 a3=7fff083aaa78 items=1 ppid=1976 pid=1977 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-power-man" exe="/usr/bin/gnome-power-manager" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
>audit(1244815638.778:26977):  cwd="/"
>[drm] LVDS-8: set mode  c
>[drm] DAC-6: set mode  2a
>fuse init (API version 7.11)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>wlan0: authenticate with AP 00:1f:33:b3:e5:8e
>wlan0: authenticated
>wlan0: associate with AP 00:1f:33:b3:e5:8e
>wlan0: RX AssocResp from 00:1f:33:b3:e5:8e (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: deauthenticated (Reason: 15)
>wlan0: direct probe to AP 00:1f:33:b3:e5:8e try 1
>wlan0 direct probe responded
>wlan0: authenticate with AP 00:1f:33:b3:e5:8e
>wlan0: authenticated
>wlan0: associate with AP 00:1f:33:b3:e5:8e
>wlan0: RX ReassocResp from 00:1f:33:b3:e5:8e (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>CE: hpet increasing min_delta_ns to 15000 nsec
>CE: hpet increasing min_delta_ns to 22500 nsec
>usb 5-2: USB disconnect, address 2

Actions: View

Attachments on bug 22241: 26691 | 26692 | 26693 | 26694 | 26727 | 26728

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.