Attachment 22486 Details for Bug 19888 – dmesg output (more system info, as suggested)

dmesg output (more system info, as suggested)

dmesg.txt (text/plain), 26.94 KB, created by smith on 2009-02-02 08:17:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: smith

Created: 2009-02-02 08:17:42 UTC

Size: 26.94 KB

patch

obsolete

>BIOS EBDA/lowmem at: 0009fc00/0009fc00
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.28 (joe@xyz) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Jan 19 17:42:49 EST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f790000 (usable)
> BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
> BIOS-e820: 000000007f79e000 - 000000007f7efb10 (ACPI NVS)
> BIOS-e820: 000000007f7efb10 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0x7f790 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 373fe000 @ 10000-16000
>RAMDISK: 37cda000 - 37fef4bb
>Allocated new RAMDISK: 009d5000 - 00cea4bb
>Move RAMDISK from 0000000037cda000 - 0000000037fef4ba to 009d5000 - 00cea4ba
>ACPI: RSDP 000F9400, 0014 (r0 ACPIAM)
>ACPI: RSDT 7F790000, 003C (r1 031908 RSDT1401 20080319 MSFT       97)
>ACPI: FACP 7F790200, 0084 (r1 031908 FACP1401 20080319 MSFT       97)
>ACPI: DSDT 7F790430, 60BB (r1  EEC1R EEC1R100      100 INTL 20051117)
>ACPI: FACS 7F79E000, 0040
>ACPI: APIC 7F790390, 005C (r1 031908 APIC1401 20080319 MSFT       97)
>ACPI: MCFG 7F7903F0, 003C (r1 031908 OEMMCFG  20080319 MSFT       97)
>ACPI: OEMB 7F79E040, 0071 (r1 031908 OEMB1401 20080319 MSFT       97)
>ACPI: GSCI 7F79E0C0, 2024 (r1 031908 GMCHSCI  20080319 MSFT       97)
>ACPI: SSDT 7F7A09F0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>1155MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 00000000 - 373fe000
>  bootmap 00012000 - 00018e80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00009d0524]    TEXT DATA BSS ==> [0000400000 - 00009d0524]
>  #4 [00009d1000 - 00009d5000]    INIT_PG_TABLE ==> [00009d1000 - 00009d5000]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>  #7 [00009d5000 - 0000cea4bb]      NEW RAMDISK ==> [00009d5000 - 0000cea4bb]
>  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
>found SMP MP-table at [c00ff780] 000ff780
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0007f790
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f790
>On node 0 totalpages: 522015
>free_area_init_node: node 0, pgdat c082b880, node_mem_map c1000200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 2312 pages used for memmap
>  HighMem zone: 293514 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
>PERCPU: Allocating 40960 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517935
>Kernel command line: ro root=UUID=5d9a0013-96a5-4134-87ad-20c4e195dd96 rhgb quiet
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c08f4000 soft=c08d4000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration matches PMTIMER. 1 loops
>Detected 2200.067 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2060652k/2088512k available (2803k kernel code, 26460k reserved, 1707k data, 400k init, 1183304k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc086d000 - 0xc08d1000   ( 400 kB)
>      .data : 0xc06bccbd - 0xc0867b50   (1707 kB)
>      .text : 0xc0400000 - 0xc06bccbd   (2803 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.13 BogoMIPS (lpj=2200067)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080926
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
>APIC calibration not consistent with PM Timer: 118ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1250040 (1487331)
>CPU 1 irqstacks, hard=c08f5000 soft=c08d5000
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4400.03 BogoMIPS (lpj=2200017)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8800.16 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 776 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 15:58:14  Date: 02/02/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:00:02.0: reg 20 io port: [0xd480-0xd487]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:00:19.0: reg 10 32bit mmio: [0xfebc0000-0xfebdffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xfebfd000-0xfebfdfff]
>pci 0000:00:19.0: reg 18 io port: [0xd800-0xd81f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
>pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
>pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
>pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
>pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
>pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
>pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
>pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
>pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfebffc00-0xfebffcff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:00:1f.6: reg 10 64bit mmio: [0xfebfe000-0xfebfefff]
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x800-0x87f has been reserved
>system 00:09: ioport range 0x500-0x53f has been reserved
>system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0d: ioport range 0xa00-0xa1f has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0x7f7fffff could not be reserved
>system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: disabled
>pci 0000:00:01.0:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0x00-0xffff]
>bus: 00 index 1 mmio: [0x000000-0xffffffff]
>bus: 02 index 0 mmio: [0x0-0x0]
>bus: 02 index 1 mmio: [0x0-0x0]
>bus: 02 index 2 mmio: [0x0-0x0]
>bus: 02 index 3 mmio: [0x0-0x0]
>bus: 01 index 0 mmio: [0x0-0x0]
>bus: 01 index 1 mmio: [0x0-0x0]
>bus: 01 index 2 mmio: [0x0-0x0]
>bus: 01 index 3 io port: [0x00-0xffff]
>bus: 01 index 4 mmio: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3157k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1233590294.400:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1721
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pcieport-driver 0000:00:01.0: irq 1279 for MSI/MSI-X
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie02: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: SSDT 7F7A01C0, 01F6 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT 7F7A0450, 0594 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: SSDT 7F7A00F0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT 7F7A03C0, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata2: port disabled. ignoring.
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 18
>ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 18
>ata3.00: SATA link down (SStatus 0 SControl 300)
>ata3.01: SATA link down (SStatus 0 SControl 300)
>ata4.00: SATA link down (SStatus 0 SControl 300)
>ata4.01: SATA link down (SStatus 0 SControl 0)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.28 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.28 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.28 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 13:157:992
>Freeing unused kernel memory: 400k freed
>Write protecting the kernel text: 2804k
>Write protecting the kernel read-only data: 1272k
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>Clocksource tsc unstable (delta = -194826182 ns)
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 1-1: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input3
>generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-1/input1
>usb 1-1: New USB device found, idVendor=1058, idProduct=1102
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: My Book
>usb 1-1: Manufacturer: Western Digital
>usb 1-1: SerialNumber: 57442D574341535533303431323031
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
>generic-usb 0003:046D:C03D.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
>usb 2-2: New USB device found, idVendor=046d, idProduct=c03d
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: USB-PS/2 Optical Mouse
>usb 2-2: Manufacturer: Logitech
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
>generic-usb 0003:03F0:0024.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-1/input0
>usb 3-1: New USB device found, idVendor=03f0, idProduct=0024
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: HP Basic USB Keyboard
>usb 3-1: Manufacturer: CHICONY
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     WD       My Book          1028 PQ: 0 ANSI: 4
>sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 10 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
>sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 10 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 4:0:0:0: [sda] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1233590306.568:2): selinux=0 auid=4294967295 ses=4294967295
>udevd version 127 started
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 1278 for MSI/MSI-X
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:22/input/input7
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:20:0c:27:81:d8
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>ppdev: user-space parallel port driver
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096440k swap on /dev/sda9.  Priority:-1 extents:1 across:2096440k
>platform microcode: firmware: requesting intel-ucode/06-0f-0a
>platform microcode: firmware: requesting intel-ucode/06-0f-0a
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>e1000e 0000:00:19.0: irq 1278 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 1278 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>0000:00:19.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:02.0: irq 1277 for MSI/MSI-X
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>eth0: no IPv6 routers present
>fuse init (API version 7.10)

Actions: View

Attachments on bug 19888: 22458 | 22479 | 22480 | 22481 | 22482 | 22483 | 22484 | 22485 | 22486

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.