Attachment 22450 Details for Bug 19886 – dmesg log

dmesg log

hi (text/plain), 42.93 KB, created by Ben Gamari on 2009-02-01 16:33:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ben Gamari

Created: 2009-02-01 16:33:06 UTC

Size: 42.93 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29-rc2ben (ben@mercury.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Thu Jan 29 17:55:07 EST 2009
>Command line: ro root=UUID=08a5df75-8652-437b-bc7f-62c3f25c3cd5 console=ttyS0,115200 i915.modeset=1
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000df65b800 (usable)
> BIOS-e820: 00000000df65b800 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>DMI 2.4 present.
>last_pfn = 0x120000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xdf65b max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-00000000df65b000
> 0000000000 - 00df600000 page 2M
> 00df600000 - 00df65b000 page 4k
>kernel direct mapping tables up to df65b000 @ 8000-e000
>last_map_addr: df65b000 end: df65b000
>init_memory_mapping: 0000000100000000-0000000120000000
> 0100000000 - 0120000000 page 2M
>kernel direct mapping tables up to 120000000 @ c000-12000
>last_map_addr: 120000000 end: 120000000
>RAMDISK: 37ca6000 - 37fefe84
>ACPI: RSDP 000FBB00, 0024 (r2 DELL  )
>ACPI: XSDT DF65D200, 0064 (r1 DELL    M08     27D70C0D ASL        61)
>ACPI: FACP DF65D09C, 00F4 (r4 DELL    M08     27D70C0D ASL        61)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT DF65D800, 63F7 (r2 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS DF66C000, 0040
>ACPI: HPET DF65D300, 0038 (r1 DELL    M08            1 ASL        61)
>ACPI: APIC DF65D400, 0068 (r1 DELL    M08     27D70C0D ASL        47)
>ACPI: ASF! DF65D000, 007E (r32 DELL    M08     27D70C0D ASL        61)
>ACPI: MCFG DF65D3C0, 003E (r16 DELL    M08     27D70C0D ASL        61)
>ACPI: SLIC DF65D49C, 0176 (r1 DELL    M08     27D70C0D ASL        61)
>ACPI: TCPA DF65D700, 0032 (r1                        0 ASL         0)
>ACPI: SSDT DF65B9C0, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Bootmem setup node 0 0000000000000000-0000000120000000
>  NODE_DATA [000000000000d000 - 0000000000021fff]
>  bootmap [0000000000022000 -  0000000000045fff] pages 24
>(7 early reservations) ==> bootmem [0000000000 - 0120000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000b2fc30]    TEXT DATA BSS ==> [0000200000 - 0000b2fc30]
>  #3 [0037ca6000 - 0037fefe84]          RAMDISK ==> [0037ca6000 - 0037fefe84]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
>  #6 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
> [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00120000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x000df65b
>    0: 0x00100000 -> 0x00120000
>On node 0 totalpages: 1046010
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2456 pages reserved
>  DMA zone: 1487 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 896659 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 00000000df65b000 - 00000000df65c000
>PM: Registered nosave memory: 00000000df65c000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
>PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
>PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
>PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
>PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000
>PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
>Allocating PCI resources starting at e2000000 (gap: e0000000:18000000)
>NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 69632 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027426
>Policy zone: Normal
>Kernel command line: ro root=UUID=08a5df75-8652-437b-bc7f-62c3f25c3cd5 console=ttyS0,115200 i915.modeset=1
>Unknown boot option `i915.modeset=1': ignoring
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2194.530 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 4045412k/4718592k available (3966k kernel code, 534552k absent, 138628k reserved, 2291k data, 1300k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.06 BogoMIPS (lpj=2194530)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>[ds] using core 2 configuration
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 18241 entries in 144 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194390)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>[ds] using core 2 configuration
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8777.84 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 1904 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  0:17:51  Date: 02/02/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG at f8000000 - fbffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT DF66C080, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
>pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
>pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
>pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
>pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
>pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
>pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
>pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
>pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
>pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
>pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
>pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
>pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
>pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
>pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8ff000-0xfe8fffff]
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
>pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xfe600000-0xfe7fffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
>pci 0000:09:00.0: reg 10 64bit mmio: [0xfe5f0000-0xfe5fffff]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.5: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
>pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.4: reg 10 32bit mmio: [0xfe4ff000-0xfe4fffff]
>pci 0000:03:01.4: reg 14 32bit mmio: [0xfe4fe800-0xfe4fefff]
>pci 0000:03:01.4: supports D1 D2
>pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.4: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: ioport range 0xc80-0xcaf has been reserved
>system 00:05: ioport range 0xcc0-0xcff could not be reserved
>system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:0a: ioport range 0xcb0-0xcbb has been reserved
>system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:0b: ioport range 0x900-0x97f has been reserved
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: ioport range 0xf400-0xf4fe has been reserved
>system 00:0c: ioport range 0x1080-0x10bf has been reserved
>system 00:0c: ioport range 0x10c0-0x10df has been reserved
>system 00:0c: ioport range 0x809-0x809 has been reserved
>system 00:0d: iomem range 0x0-0x9efff could not be reserved
>system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff has been reserved
>system 00:0d: iomem range 0xe0000-0xfffff has been reserved
>system 00:0d: iomem range 0x100000-0xdf65b7ff could not be reserved
>system 00:0d: iomem range 0xdf65b800-0xdf6fffff has been reserved
>system 00:0d: iomem range 0xdf700000-0xdf7fffff has been reserved
>system 00:0d: iomem range 0xdf700000-0xdfefffff could not be reserved
>system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
>system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
>system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
>system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
>system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
>system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
>Switched to high resolution mode on CPU 1
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>Switched to high resolution mode on CPU 0
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xfe800000-0xfe8fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.3:   MEM window: 0xfe600000-0xfe7fffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xfe500000-0xfe5fffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
>pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
>pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
>pci 0000:03:01.0:   PREFETCH window: 0xf4000000-0xf7ffffff
>pci 0000:03:01.0:   MEM window: 0x120000000-0x123ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xfe400000-0xfe4fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:03:01.0: enabling device (0000 -> 0003)
>pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 1 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
>pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0d: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:0d: resource 1 mem: [0xfe600000-0xfe7fffff]
>pci_bus 0000:0d: resource 2 mem: [0xf0000000-0xf01fffff]
>pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
>pci_bus 0000:09: resource 0 mem: [0x0-0x0]
>pci_bus 0000:09: resource 1 mem: [0xfe500000-0xfe5fffff]
>pci_bus 0000:09: resource 2 mem: [0x0-0x0]
>pci_bus 0000:09: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:03: resource 1 mem: [0xfe400000-0xfe4fffff]
>pci_bus 0000:03: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:04: resource 0 io:  [0x2000-0x20ff]
>pci_bus 0000:04: resource 1 io:  [0x2400-0x24ff]
>pci_bus 0000:04: resource 2 mem: [0xf4000000-0xf7ffffff]
>pci_bus 0000:04: resource 3 mem: [0x120000000-0x123ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3367k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1233533871.122:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Btrfs loaded
>msgmni has been set to 7907
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>acpiphp: Slot [2] registered
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1-1] registered
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: SSDT DF65C4F6, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT DF65BE8C, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT DF65C77C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT DF65C471, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (59 C)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 28
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HTS722012K9A300, DCCOC54P, max UDMA/133
>ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72201 DCCO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata3: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
>ata4.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>ata5: port disabled. ignoring.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-rc2ben ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-rc2ben ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-rc2ben uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-rc2ben uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-rc2ben uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.29-rc2ben uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.29-rc2ben uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>Marking TSC unstable due to TSC halts in idle
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 13:837:252
>uhci_hcd 0000:00:1d.0: hash matches
>Freeing unused kernel memory: 1300k freed
>Write protecting the kernel read-only data: 1784k
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>Clocksource tsc unstable (delta = -127078567 ns)
>usb 3-2: New USB device found, idVendor=413c, idProduct=8140
>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-2: configuration #1 chosen from 1 choice
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 733, dev sda2:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda2 with ordered data mode
>usb 7-1: new full speed USB device using uhci_hcd and address 2
>type=1404 audit(1233533874.213:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input4
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
>usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
>usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 7-1: configuration #1 chosen from 1 choice
>hub 7-1:1.0: USB hub found
>hub 7-1:1.0: 4 ports detected
>SELinux: 8192 avtab hash slots, 112836 rules.
>SELinux: 8192 avtab hash slots, 112836 rules.
>usb 7-1.2: new full speed USB device using uhci_hcd and address 3
>SELinux:  8 users, 11 roles, 2652 types, 119 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 112836 rules
>SELinux:  class kernel_service not defined in policy
>SELinux: the above unknown classes and permissions will be allowed
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1233533874.655:3): policy loaded auid=4294967295 ses=4294967295
>usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
>usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1.2: Product: O2Micro CCID SC Reader
>usb 7-1.2: Manufacturer: O2
>usb 7-1.2: configuration #1 chosen from 1 choice
>udevd version 127 started
>ACPI: WMI: Mapper loaded
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input7
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204]
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input8
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
>yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
>yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
>yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0ca8, PCI irq 19
>yenta_cardbus 0000:03:01.0: Socket status: 30000006
>pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xfe400000 - 0xfe4fffff
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>tg3.c:v3.97 (December 10, 2008)
>tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:09:00.0: setting latency timer to 64
>tg3 0000:09:00.0: PME# disabled
>tg3 0000:09:00.0: firmware: requesting tigon/tg3_tso.bin
>eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:a8:30:99
>eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>firewire_core: created device fw0: GUID 384fc0001a532da1, S400
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:0c:00.0: setting latency timer to 64
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:0c:00.0: PCI INT A disabled
>wmaster0 (iwl3945): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>wlan0 (iwl3945): not using net_device_ops yet
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_codec.c:3492: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3496:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3500:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3501:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3509:    inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:2978: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
>input: HDA Intel at 0xfe9fc000 irq 21 Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
>input: HDA Intel at 0xfe9fc000 irq 21 HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
>device-mapper: multipath: version 1.0.5 loaded
>EXT4 FS on sda2, internal journal on sda2:8
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda4, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4490156k swap on /dev/sda3.  Priority:-1 extents:1 across:4490156k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.11)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>tg3 0000:09:00.0: PME# disabled
>tg3 0000:09:00.0: irq 29 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>iwl3945 0000:0c:00.0: irq 30 for MSI/MSI-X
>iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 loaded firmware version 15.28.2.8
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>Bridge firewalling registered
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>wlan0: authenticate with AP 00:1f:ca:51:63:7e
>wlan0: authenticated
>wlan0: associate with AP 00:1f:ca:51:63:7e
>wlan0: associate with AP 00:1f:ca:51:63:7e
>wlan0: RX AssocResp from 00:1f:ca:51:63:7e (capab=0x1 status=0 aid=2)
>wlan0: associated
>wlan0: disassociating by local choice (reason=3)
>CE: hpet increasing min_delta_ns to 15000 nsec
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:02.0: irq 31 for MSI/MSI-X
>[drm] TV-15: set mode NTSC 480i 0
>allocated 1920x1200 fb: 0x007df000, bo ffff88010b7c9b40
>Console: switching to colour frame buffer device 240x75
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:3070 freeing invalid memtype e0000000-f0000000
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:3071 freeing invalid memtype e0000000-f0000000
>Xorg:2875 conflicting memory types e0000000-f0000000 uncached-minus<->write-combining
>reserve_memtype failed 0xe0000000-0xf0000000, track uncached-minus, req uncached-minus
>Xorg:3072 freeing invalid memtype e0000000-f0000000
>CE: hpet increasing min_delta_ns to 22500 nsec
>wlan0: deauthenticated (Reason: 1)

Actions: View

Attachments on bug 19886: 22450 | 22451

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.