Attachment 19682 Details for Bug 18084 – dmesg output

dmesg output

dmesg.out (text/plain), 38.48 KB, created by Edney Matias on 2008-10-15 18:49:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Edney Matias

Created: 2008-10-15 18:49:28 UTC

Size: 38.48 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-3.fc10.x86_64 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081007 (Red Hat 4.3.2-6) (GCC) ) #1 SMP Fri Oct 10 00:54:47 EDT 2008
>Command line: ro root=UUID=15239297-cabf-4805-885d-d84a48878a7b rhgb quiet vga=0x318
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f66d800 (usable)
> BIOS-e820: 000000003f66d800 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>last_pfn = 0x3f66d max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 003f600000 page 2M
> 003f600000 - 003f66d000 page 4k
>kernel direct mapping tables up to 3f66d000 @ 8000-b000
>last_map_addr: 3f66d000 end: 3f66d000
>RAMDISK: 37cb4000 - 37fefff3
>DMI 2.4 present.
>ACPI: RSDP 000FBBF0, 0024 (r2 DELL  )
>ACPI: XSDT 3F66F200, 005C (r1 DELL    M08     27D80203 ASL        61)
>ACPI: FACP 3F66F09C, 00F4 (r4 DELL    M08     27D80203 ASL        61)
>ACPI: DSDT 3F66F800, 5676 (r2 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 3F67E000, 0040
>ACPI: HPET 3F66F300, 0038 (r1 DELL    M08            1 ASL        61)
>ACPI: APIC 3F66F400, 0068 (r1 DELL    M08     27D80203 ASL        47)
>ACPI: MCFG 3F66F3C0, 003E (r16 DELL    M08     27D80203 ASL        61)
>ACPI: SLIC 3F66F49C, 0176 (r1 DELL    M08     27D80203 ASL        61)
>ACPI: BOOT 3F66EFC0, 0028 (r1 DELL    M08     27D80203 ASL        61)
>ACPI: SSDT 3F66D9BC, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003f66d000
>Bootmem setup node 0 0000000000000000-000000003f66d000
>  NODE_DATA [0000000000009000 - 0000000000020fff]
>  bootmap [0000000000021000 -  0000000000028ecf] pages 8
>(6 early reservations) ==> bootmem [0000000000 - 003f66d000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000c12114]    TEXT DATA BSS ==> [0000200000 - 0000c12114]
>  #3 [0037cb4000 - 0037fefff3]          RAMDISK ==> [0037cb4000 - 0037fefff3]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
> [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003f66d
>On node 0 totalpages: 259596
>  DMA zone: 1264 pages, LIFO batch:0
>  DMA32 zone: 252102 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
>PERCPU: Allocating 74016 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 253366
>Policy zone: DMA32
>Kernel command line: ro root=UUID=15239297-cabf-4805-885d-d84a48878a7b rhgb quiet vga=0x318
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 1994.968 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1010052k/1038772k available (3538k kernel code, 28332k reserved, 1880k data, 1284k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.93 BogoMIPS (lpj=1994968)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>Using local APIC timer interrupts.
>APIC timer calibration result 12468563
>Detected 12.468 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.82 BogoMIPS (lpj=1994911)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (7979.75 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5952 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  0:58:02  Date: 10/16/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG at f8000000 - fbffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:02.0 reg 10 64bit mmio: [fea00000, feafffff]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff]
>PCI: 0000:00:02.0 reg 20 io port: [eff8, efff]
>PCI: 0000:00:02.1 reg 10 64bit mmio: [feb00000, febfffff]
>PCI: 0000:00:1a.0 reg 20 io port: [6f20, 6f3f]
>PCI: 0000:00:1a.1 reg 20 io port: [6f00, 6f1f]
>PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe9fc000, fe9fffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [6f80, 6f9f]
>PCI: 0000:00:1d.1 reg 20 io port: [6f60, 6f7f]
>PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
>PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
>PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
>PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
>PCI: 0000:00:1f.1 reg 20 io port: [6fa0, 6faf]
>PCI: 0000:00:1f.2 reg 10 io port: [6eb0, 6eb7]
>PCI: 0000:00:1f.2 reg 14 io port: [6eb8, 6ebb]
>PCI: 0000:00:1f.2 reg 18 io port: [6ec0, 6ec7]
>PCI: 0000:00:1f.2 reg 1c io port: [6ec8, 6ecb]
>PCI: 0000:00:1f.2 reg 20 io port: [6ee0, 6eff]
>PCI: 0000:00:1f.2 reg 24 32bit mmio: [fe9fb800, fe9fbfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 10 32bit mmio: [fe9fb700, fe9fb7ff]
>PCI: 0000:00:1f.3 reg 20 io port: [10c0, 10df]
>PCI: 0000:0c:00.0 reg 10 32bit mmio: [fe8ff000, fe8fffff]
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.1 32bit mmio: [fe800000, fe8fffff]
>PCI: bridge 0000:00:1c.3 io port: [d000, dfff]
>PCI: bridge 0000:00:1c.3 32bit mmio: [fe600000, fe7fffff]
>PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff]
>PCI: 0000:09:00.0 reg 10 64bit mmio: [fe5f0000, fe5fffff]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>PCI: bridge 0000:00:1c.5 32bit mmio: [fe500000, fe5fffff]
>PCI: 0000:03:01.0 reg 10 32bit mmio: [fe4ff800, fe4fffff]
>pci 0000:03:01.0: supports D1
>pci 0000:03:01.0: supports D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>PCI: 0000:03:01.1 reg 10 32bit mmio: [fe4ff500, fe4ff5ff]
>pci 0000:03:01.1: supports D1
>pci 0000:03:01.1: supports D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>PCI: 0000:03:01.2 reg 10 32bit mmio: [fe4ff600, fe4ff6ff]
>pci 0000:03:01.2: supports D1
>pci 0000:03:01.2: supports D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>PCI: 0000:03:01.3 reg 10 32bit mmio: [fe4ff700, fe4ff7ff]
>pci 0000:03:01.3: supports D1
>pci 0000:03:01.3: supports D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 32bit mmio: [fe400000, fe4fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:05: ioport range 0xc80-0xcff could not be reserved
>system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:09: ioport range 0x900-0x97f has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0xf400-0xf4fe has been reserved
>system 00:0a: ioport range 0x1080-0x10bf has been reserved
>system 00:0a: ioport range 0x10c0-0x10df has been reserved
>system 00:0a: ioport range 0x809-0x809 has been reserved
>system 00:0b: iomem range 0x0-0x9efff could not be reserved
>system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0b: iomem range 0xc0000-0xcffff has been reserved
>system 00:0b: iomem range 0xe0000-0xfffff has been reserved
>system 00:0b: iomem range 0x100000-0x3f66d7ff could not be reserved
>system 00:0b: iomem range 0x3f66d800-0x3f6fffff could not be reserved
>system 00:0b: iomem range 0x3f700000-0x3f7fffff could not be reserved
>system 00:0b: iomem range 0x3f700000-0x3fefffff could not be reserved
>system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
>system 00:0b: iomem range 0xfeda0000-0xfeda3fff could not be reserved
>system 00:0b: iomem range 0xfeda4000-0xfeda4fff could not be reserved
>system 00:0b: iomem range 0xfeda5000-0xfeda5fff could not be reserved
>system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0b: iomem range 0xfed18000-0xfed1bfff could not be reserved
>system 00:0b: iomem range 0xf8000000-0xfbffffff could not be reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xfe800000-0xfe8fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.3:   MEM window: 0xfe600000-0xfe7fffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
>pci 0000:00:1c.5:   IO window: disabled
>pci 0000:00:1c.5:   MEM window: 0xfe500000-0xfe5fffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xfe400000-0xfe4fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 0b index 0 mmio: [0, 0]
>bus: 0b index 1 mmio: [0, 0]
>bus: 0b index 2 mmio: [0, 0]
>bus: 0b index 3 mmio: [0, 0]
>bus: 0c index 0 mmio: [0, 0]
>bus: 0c index 1 mmio: [fe800000, fe8fffff]
>bus: 0c index 2 mmio: [0, 0]
>bus: 0c index 3 mmio: [0, 0]
>bus: 0d index 0 io port: [d000, dfff]
>bus: 0d index 1 mmio: [fe600000, fe7fffff]
>bus: 0d index 2 mmio: [f0000000, f01fffff]
>bus: 0d index 3 mmio: [0, 0]
>bus: 09 index 0 mmio: [0, 0]
>bus: 09 index 1 mmio: [fe500000, fe5fffff]
>bus: 09 index 2 mmio: [0, 0]
>bus: 09 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [fe400000, fe4fffff]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 io port: [0, ffff]
>bus: 03 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3311k freed
>Simple Boot Flag at 0x79 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1224118681.810:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1979
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: found MSI capability
>pci_express 0000:00:1c.5:pcie00: allocate port service
>pci_express 0000:00:1c.5:pcie02: allocate port service
>pci_express 0000:00:1c.5:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004580000, using 6144k, total 7616k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: SSDT 3F66E4F2, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 3F66DE88, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F66E778, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 3F66E46D, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (45 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 17
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 17
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST980811AS, 3.CDE, max UDMA/133
>ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST980811AS       3.CD PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
>ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T21N, A100, max UDMA/33
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>isa bounce pool size: 16 pages
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-T21N A100 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-3.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-3.fc10.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-3.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-6: new high speed USB device using ehci_hcd and address 3
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-3.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-6: configuration #1 chosen from 1 choice
>usb 2-6: New USB device found, idVendor=05a9, idProduct=2640
>usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-6: Product: Laptop Integrated Webcam
>usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-3.fc10.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27-3.fc10.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: New USB device found, idVendor=413c, idProduct=3200
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: Dell USB Mouse
>usb 5-1: Manufacturer: Dell
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.27-3.fc10.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usbcore: registered new interface driver hiddev
>input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
>input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 12:664:961
>Freeing unused kernel memory: 1284k freed
>Write protecting the kernel read-only data: 1516k
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1224118685.225:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 106213 rules.
>SELinux: 8192 avtab hash slots, 106213 rules.
>SELinux:  8 users, 11 roles, 2460 types, 119 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 106213 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1224118685.563:3): policy loaded auid=4294967295 ses=4294967295
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: WMI: Mapper loaded
>acpi device:32: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/device:2f/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>acpi device:37: registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/input/input9
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:39/input/input10
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>tg3.c:v3.94 (August 14, 2008)
>tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:09:00.0: setting latency timer to 64
>iTCO_vendor_support: vendor-support=0
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1c:23:fe:ea:b7
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /devices/platform/pcspkr/input/input11
>Linux video capture interface: v2.00
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:0c:00.0: setting latency timer to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>iwl3945 0000:0c:00.0: PCI INT A disabled
>sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
>sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0
>mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
>uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
>input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input12
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>firewire_core: created device fw0: GUID 354fc000001305c1, S400
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=2 (0xa/0xf/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0xc, fmic=0xe, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:2377: dac_nids=3 (0x2/0x5/0x3/0x0/0x0)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 996020k swap on /dev/sda2.  Priority:-1 extents:1 across:996020k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-0f-0d
>firmware: requesting intel-ucode/06-0f-0d
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Clocksource tsc unstable (delta = -270605261 ns)
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>firmware: requesting iwlwifi-3945-1.ucode
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>Not cloning cgroup for unused subsystem ns
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm:i915_driver_load] *ERROR* failed to enable MSI
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>virbr0: no IPv6 routers present
>wlan0: authenticate with AP 00:15:c7:a8:a4:f0
>wlan0: authenticate with AP 00:15:c7:a8:a4:f0
>wlan0: authenticated
>wlan0: associate with AP 00:15:c7:a8:a4:f0
>wlan0: RX AssocResp from 00:15:c7:a8:a4:f0 (capab=0x431 status=0 aid=33)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 18084: 19681 | 19682 | 19683 | 19740

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.