Attachment 19066 Details for Bug 17583 – dmesg output

dmesg output

dmesg (text/plain), 44.03 KB, created by Johan Bilien on 2008-09-21 08:16:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Johan Bilien

Created: 2008-09-21 08:16:31 UTC

Size: 44.03 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
>[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
>[    0.000000]  BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>[    0.000000]  BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>[    0.000000] Warning only 4GB will be used.
>[    0.000000] Use a HIGHMEM64G enabled kernel.
>[    0.000000] 3200MB HIGHMEM available.
>[    0.000000] 896MB LOWMEM available.
>[    0.000000] found SMP MP-table at [c00f6900] 000f6900
>[    0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA             0 ->     4096
>[    0.000000]   Normal       4096 ->   229376
>[    0.000000]   HighMem    229376 ->  1048576
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[1] active PFN ranges
>[    0.000000]     0:        0 ->  1048576
>[    0.000000] On node 0 totalpages: 1048576
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1760 pages used for memmap
>[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 6400 pages used for memmap
>[    0.000000]   HighMem zone: 812800 pages, LIFO batch:31
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] DMI present.
>[    0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
>[    0.000000] ACPI: XSDT BF6BB79F, 0094 (r1 LENOVO TP-7L        1260  LTP        0)
>[    0.000000] ACPI: FACP BF6BB900, 00F4 (r3 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321]
>[    0.000000] ACPI: DSDT BF6BBD0C, FEC2 (r1 LENOVO TP-7L        1260 MSFT  3000000)
>[    0.000000] ACPI: FACS BF6E4000, 0040
>[    0.000000] ACPI: SSDT BF6BBAB4, 0258 (r1 LENOVO TP-7L        1260 MSFT  3000000)
>[    0.000000] ACPI: ECDT BF6CBBCE, 0052 (r1 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI: TCPA BF6CBC20, 0032 (r2 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI: APIC BF6CBC52, 0068 (r1 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI: MCFG BF6CBCBA, 003C (r1 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI: HPET BF6CBCF6, 0038 (r1 LENOVO TP-7L        1260 LNVO        1)
>[    0.000000] ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7L        1260  LTP        0)
>[    0.000000] ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7L        1260  LTP        1)
>[    0.000000] ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7L        1260 PTL         1)
>[    0.000000] ACPI: SSDT BF6E26D9, 025F (r1 LENOVO TP-7L        1260 INTL 20050513)
>[    0.000000] ACPI: SSDT BF6E2938, 00A6 (r1 LENOVO TP-7L        1260 INTL 20050513)
>[    0.000000] ACPI: SSDT BF6E29DE, 04F7 (r1 LENOVO TP-7L        1260 INTL 20050513)
>[    0.000000] ACPI: SSDT BF6E2ED5, 01D8 (r1 LENOVO TP-7L        1260 INTL 20050513)
>[    0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
>[    0.000000] ACPI: Added _OSI(Linux)
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
>[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
>[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1040384
>[    0.000000] Kernel command line: root=/dev/mapper/jobi--t61-root ro quiet
>[    0.000000] mapped APIC to ffffb000 (fee00000)
>[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Detected 1995.079 MHz processor.
>[    0.004000] Console: colour VGA+ 80x25
>[    0.004000] console [tty0] enabled
>[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.004000] Memory: 3090632k/4194304k available (1768k kernel code, 44232k reserved, 749k data, 244k init, 2218688k highmem)
>[    0.004000] virtual kernel memory layout:
>[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
>[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>[    0.004000]       .init : 0xc037d000 - 0xc03ba000   ( 244 kB)
>[    0.004000]       .data : 0xc02ba033 - 0xc0375620   ( 749 kB)
>[    0.004000]       .text : 0xc0100000 - 0xc02ba033   (1768 kB)
>[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
>[    0.004000] hpet clockevent registered
>[    0.083940] Calibrating delay using timer specific routine.. 3999.24 BogoMIPS (lpj=7998492)
>[    0.084005] Security Framework initialized
>[    0.084005] SELinux:  Disabled at boot.
>[    0.084005] Capability LSM initialized
>[    0.084005] Mount-cache hash table entries: 512
>[    0.084005] Initializing cgroup subsys ns
>[    0.084005] Initializing cgroup subsys cpuacct
>[    0.084005] Initializing cgroup subsys devices
>[    0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.084005] CPU: L2 cache: 2048K
>[    0.084005] CPU: Physical Processor ID: 0
>[    0.084005] CPU: Processor Core ID: 0
>[    0.084005] Intel machine check architecture supported.
>[    0.084005] Intel machine check reporting enabled on CPU#0.
>[    0.084005] using mwait in idle threads.
>[    0.084005] Checking 'hlt' instruction... OK.
>[    0.100006] ACPI: Core revision 20080321
>[    0.144009] ENABLING IO-APIC IRQs
>[    0.144009] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.183770] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>[    0.184011] Booting processor 1/1 ip 6000
>[    0.192012] Initializing CPU#1
>[    0.192012] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980092)
>[    0.192012] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.192012] CPU: L2 cache: 2048K
>[    0.192012] CPU: Physical Processor ID: 0
>[    0.192012] CPU: Processor Core ID: 1
>[    0.192012] Intel machine check architecture supported.
>[    0.192012] Intel machine check reporting enabled on CPU#1.
>[    0.272017] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>[    0.272017] checking TSC synchronization [CPU#0 -> CPU#1]:
>[    0.272017] Measured 1128530 cycles TSC warp between CPUs, turning off TSC clock.
>[    0.272017] Marking TSC unstable due to: check_tsc_sync_source failed.
>[    0.272047] Brought up 2 CPUs
>[    0.272053] Total of 2 processors activated (7989.29 BogoMIPS).
>[    0.272083] CPU0 attaching sched-domain:
>[    0.272089]  domain 0: span 0-1
>[    0.272093]   groups: 0 1
>[    0.272103] CPU1 attaching sched-domain:
>[    0.272108]  domain 0: span 0-1
>[    0.272112]   groups: 1 0
>[    0.276017] net_namespace: 660 bytes
>[    0.276017] Booting paravirtualized kernel on bare hardware
>[    0.276017] NET: Registered protocol family 16
>[    0.276017] ACPI: bus type pci registered
>[    0.276017] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>[    0.276017] PCI: MCFG area at f0000000 reserved in E820
>[    0.276017] PCI: Using MMCONFIG for extended config space
>[    0.276017] PCI: Using configuration type 1 for base access
>[    0.276017] Setting up standard PCI resources
>[    0.287443] ACPI: EC: EC description table is found, configuring boot EC
>[    0.300018] ACPI: BIOS _OSI(Linux) query honored via DMI
>[    0.301812] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[    0.327365] ACPI: Interpreter enabled
>[    0.327365] ACPI: (supports S0 S3 S4 S5)
>[    0.327365] ACPI: Using IOAPIC for interrupt routing
>[    0.359367] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>[    0.359367] ACPI: EC: driver started in interrupt mode
>[    0.359367] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.363010] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>[    0.363022] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>[    0.366728] PCI: Transparent bridge - 0000:00:1e.0
>[    0.366956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.367367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>[    0.367719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>[    0.367719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>[    0.367745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>[    0.368100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>[    0.368454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>[    0.379885] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.380431] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.380969] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.381507] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.382043] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.386183] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.386183] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.386265] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.387134] ACPI: Power Resource [PUBS] (on)
>[    0.387134] Linux Plug and Play Support v0.97 (c) Adam Belay
>[    0.387134] pnp: PnP ACPI init
>[    0.387134] ACPI: bus type pnp registered
>[    0.400921] pnp: PnP ACPI: found 11 devices
>[    0.400927] ACPI: ACPI bus type pnp unregistered
>[    0.400933] PnPBIOS: Disabled by ACPI PNP
>[    0.402184] PCI: Using ACPI for IRQ routing
>[    0.409743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.409755] hpet0: 3 64-bit timers, 14318180 Hz
>[    0.410870] ACPI: RTC can wake from S4
>[    0.413751] Switched to high resolution mode on CPU 0
>[    0.414348] Switched to high resolution mode on CPU 1
>[    0.414378] system 00:00: iomem range 0x0-0x9ffff could not be reserved
>[    0.414385] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>[    0.414392] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>[    0.414398] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>[    0.414404] system 00:00: iomem range 0xcc000-0xcffff has been reserved
>[    0.414411] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>[    0.414417] system 00:00: iomem range 0xe0000-0xe3fff has been reserved
>[    0.414423] system 00:00: iomem range 0xe4000-0xe7fff has been reserved
>[    0.414429] system 00:00: iomem range 0xe8000-0xebfff has been reserved
>[    0.414435] system 00:00: iomem range 0xec000-0xeffff has been reserved
>[    0.414442] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>[    0.414449] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
>[    0.414456] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>[    0.414463] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
>[    0.414479] system 00:02: ioport range 0x164e-0x164f has been reserved
>[    0.414485] system 00:02: ioport range 0x1000-0x107f has been reserved
>[    0.414491] system 00:02: ioport range 0x1180-0x11bf has been reserved
>[    0.414497] system 00:02: ioport range 0x800-0x80f has been reserved
>[    0.414504] system 00:02: ioport range 0x15e0-0x15ef has been reserved
>[    0.414510] system 00:02: ioport range 0x1600-0x165f could not be reserved
>[    0.414517] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>[    0.414525] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>[    0.414532] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>[    0.414539] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>[    0.414545] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>[    0.414553] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
>[    0.448435] PCI: Bridge: 0000:00:1c.0
>[    0.448435]   IO window: 2000-2fff
>[    0.448435]   MEM window: 0xfc000000-0xfdffffff
>[    0.448435]   PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
>[    0.448435] PCI: Bridge: 0000:00:1c.1
>[    0.448435]   IO window: 3000-3fff
>[    0.448435]   MEM window: 0xdc000000-0xdf3fffff
>[    0.448435]   PREFETCH window: 0x00000000dfe00000-0x00000000dfefffff
>[    0.448435] PCI: Bridge: 0000:00:1c.2
>[    0.448435]   IO window: 4000-4fff
>[    0.448435]   MEM window: 0xd8000000-0xd9ffffff
>[    0.448435]   PREFETCH window: 0x00000000dfb00000-0x00000000dfbfffff
>[    0.448435] PCI: Bridge: 0000:00:1c.3
>[    0.448435]   IO window: 5000-5fff
>[    0.448435]   MEM window: 0xd4000000-0xd5ffffff
>[    0.448435]   PREFETCH window: 0x00000000df800000-0x00000000df8fffff
>[    0.448435] PCI: Bridge: 0000:00:1c.4
>[    0.448435]   IO window: 6000-6fff
>[    0.448435]   MEM window: 0xd0000000-0xd1ffffff
>[    0.448435]   PREFETCH window: 0x00000000df500000-0x00000000df5fffff
>[    0.448435] PCI: Bus 22, cardbus bridge: 0000:15:00.0
>[    0.448435]   IO window: 0x00007000-0x000070ff
>[    0.448435]   IO window: 0x00007400-0x000074ff
>[    0.448435]   PREFETCH window: 0xf4000000-0xf7ffffff
>[    0.448435]   MEM window: 0xc4000000-0xc7ffffff
>[    0.448435] PCI: Bridge: 0000:00:1e.0
>[    0.448435]   IO window: 7000-afff
>[    0.448435]   MEM window: 0xf8300000-0xfbffffff
>[    0.448435]   PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
>[    0.448435] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>[    0.448435] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[    0.448510] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>[    0.448526] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>[    0.448599] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
>[    0.448615] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>[    0.448687] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
>[    0.448703] PCI: Setting latency timer of device 0000:00:1c.3 to 64
>[    0.448773] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
>[    0.448789] PCI: Setting latency timer of device 0000:00:1c.4 to 64
>[    0.448822] pci 0000:00:1e.0: enabling device (0005 -> 0007)
>[    0.448841] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>[    0.448889] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[    0.448906] PCI: Setting latency timer of device 0000:15:00.0 to 64
>[    0.449003] NET: Registered protocol family 2
>[    0.460551] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.461079] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.461925] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.462290] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.462290] TCP reno registered
>[    0.464465] NET: Registered protocol family 1
>[    0.464688] checking if image is initramfs... it is
>[    1.869807] Freeing initrd memory: 7281k freed
>[    1.870293] Simple Boot Flag at 0x35 set to 0x1
>[    1.871338] audit: initializing netlink socket (disabled)
>[    1.871369] type=2000 audit(1222009299.856:1): initialized
>[    1.874289] highmem bounce pool size: 64 pages
>[    1.874289] Total HugeTLB memory allocated, 0
>[    1.874289] VFS: Disk quotas dquot_6.5.1
>[    1.874289] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.874289] msgmni has been set to 1719
>[    1.874289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    1.874289] io scheduler noop registered
>[    1.874289] io scheduler anticipatory registered
>[    1.874289] io scheduler deadline registered
>[    1.874289] io scheduler cfq registered (default)
>[    1.874289] pci 0000:00:02.0: Boot video device
>[    1.874289] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[    1.874439] assign_interrupt_mode Found MSI capability
>[    1.874439] Allocate Port Service[0000:00:1c.0:pcie00]
>[    1.874439] Allocate Port Service[0000:00:1c.0:pcie02]
>[    1.874439] Allocate Port Service[0000:00:1c.0:pcie03]
>[    1.874439] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>[    1.874439] assign_interrupt_mode Found MSI capability
>[    1.874452] Allocate Port Service[0000:00:1c.1:pcie00]
>[    1.878292] Allocate Port Service[0000:00:1c.1:pcie02]
>[    1.878292] Allocate Port Service[0000:00:1c.1:pcie03]
>[    1.878292] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>[    1.878292] assign_interrupt_mode Found MSI capability
>[    1.878292] Allocate Port Service[0000:00:1c.2:pcie00]
>[    1.878292] Allocate Port Service[0000:00:1c.2:pcie02]
>[    1.878292] Allocate Port Service[0000:00:1c.2:pcie03]
>[    1.878292] PCI: Setting latency timer of device 0000:00:1c.3 to 64
>[    1.878292] assign_interrupt_mode Found MSI capability
>[    1.878292] Allocate Port Service[0000:00:1c.3:pcie00]
>[    1.878292] Allocate Port Service[0000:00:1c.3:pcie02]
>[    1.878292] Allocate Port Service[0000:00:1c.3:pcie03]
>[    1.878292] PCI: Setting latency timer of device 0000:00:1c.4 to 64
>[    1.878292] assign_interrupt_mode Found MSI capability
>[    1.878292] Allocate Port Service[0000:00:1c.4:pcie00]
>[    1.878292] Allocate Port Service[0000:00:1c.4:pcie02]
>[    1.878292] Allocate Port Service[0000:00:1c.4:pcie03]
>[    1.878297] isapnp: Scanning for PnP cards...
>[    2.239790] isapnp: No Plug & Play device found
>[    2.248024] hpet_resources: 0xfed00000 is busy
>[    2.249856] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>[    2.253853] brd: module loaded
>[    2.253853] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    2.262031] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.262045] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.262299] mice: PS/2 mouse device common for all mice
>[    2.262299] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>[    2.262299] rtc0: alarms up to one month, y3k
>[    2.262299] cpuidle: using governor ladder
>[    2.262299] cpuidle: using governor menu
>[    2.262299] No iBFT detected.
>[    2.262299] TCP cubic registered
>[    2.262299] NET: Registered protocol family 17
>[    2.262299] Using IPI No-Shortcut mode
>[    2.262307] registered taskstats version 1
>[    2.262307] rtc_cmos 00:07: setting system clock to 2008-09-21 15:01:41 UTC (1222009301)
>[    2.262307] Freeing unused kernel memory: 244k freed
>[    2.269824] input: AT Translated Set 2 keyboard as /class/input/input0
>[    2.458831] ACPI: SSDT BF6E1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>[    2.460303] ACPI: SSDT BF6E1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>[    2.469386] Monitor-Mwait will be used to enter C-1 state
>[    2.469386] Monitor-Mwait will be used to enter C-2 state
>[    2.469386] Monitor-Mwait will be used to enter C-3 state
>[    2.469386] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>[    2.469412] ACPI: ACPI0007:00 is registered as cooling_device0
>[    2.469421] ACPI: Processor [CPU0] (supports 8 throttling states)
>[    2.470108] ACPI: SSDT BF6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>[    2.471232] ACPI: SSDT BF6E1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>[    2.475422] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>[    2.475422] ACPI: ACPI0007:01 is registered as cooling_device1
>[    2.475422] ACPI: Processor [CPU1] (supports 8 throttling states)
>[    2.484429] ACPI: LNXTHERM:01 is registered as thermal_zone0
>[    2.485181] ACPI: Thermal Zone [THM0] (32 C)
>[    2.485230] ACPI: LNXTHERM:02 is registered as thermal_zone1
>[    2.488422] ACPI: Thermal Zone [THM1] (28 C)
>[    2.830389] ACPI: ACPI Dock Station Driver
>[    2.907828] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
>[    2.907828] e1000e: Copyright (c) 1999-2008 Intel Corporation.
>[    2.907828] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>[    2.907828] PCI: Setting latency timer of device 0000:00:19.0 to 64
>[    3.131826] eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:1e:9b:3a
>[    3.131826] eth0: Intel(R) PRO/1000 Network Connection
>[    3.131826] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
>[    3.135827] usbcore: registered new interface driver usbfs
>[    3.135827] usbcore: registered new interface driver hub
>[    3.135827] usbcore: registered new device driver usb
>[    3.136357] USB Universal Host Controller Interface driver v3.0
>[    3.136421] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>[    3.136444] PCI: Setting latency timer of device 0000:00:1a.0 to 64
>[    3.136453] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    3.136637] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    3.136708] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>[    3.139828] usb usb1: configuration #1 chosen from 1 choice
>[    3.139828] hub 1-0:1.0: USB hub found
>[    3.139828] hub 1-0:1.0: 2 ports detected
>[    3.244088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.244096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.244102] usb usb1: Product: UHCI Host Controller
>[    3.244106] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>[    3.244111] usb usb1: SerialNumber: 0000:00:1a.0
>[    3.247826] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>[    3.247826] PCI: Setting latency timer of device 0000:00:1a.1 to 64
>[    3.247826] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    3.247826] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>[    3.247826] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>[    3.247826] usb usb2: configuration #1 chosen from 1 choice
>[    3.247826] hub 2-0:1.0: USB hub found
>[    3.247826] hub 2-0:1.0: 2 ports detected
>[    3.349092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.349101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.349107] usb usb2: Product: UHCI Host Controller
>[    3.349111] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>[    3.349116] usb usb2: SerialNumber: 0000:00:1a.1
>[    3.351476] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>[    3.351511] PCI: Setting latency timer of device 0000:00:1a.7 to 64
>[    3.351521] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    3.351582] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
>[    3.355527] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>[    3.355553] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>[    3.364847] SCSI subsystem initialized
>[    3.372092] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    3.372238] usb usb3: configuration #1 chosen from 1 choice
>[    3.372309] hub 3-0:1.0: USB hub found
>[    3.372323] hub 3-0:1.0: 4 ports detected
>[    3.408044] libata version 3.00 loaded.
>[    3.412044] ricoh-mmc: Ricoh MMC Controller disabling driver
>[    3.412044] ricoh-mmc: Copyright(c) Philip Langdale
>[    3.412044] sdhci: Secure Digital Host Controller Interface driver
>[    3.412044] sdhci: Copyright(c) Pierre Ossman
>[    3.480102] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    3.480110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.480116] usb usb3: Product: EHCI Host Controller
>[    3.480120] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
>[    3.480125] usb usb3: SerialNumber: 0000:00:1a.7
>[    3.480406] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>[    3.480430] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>[    3.480440] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    3.480512] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    3.480582] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>[    3.480749] usb usb4: configuration #1 chosen from 1 choice
>[    3.480810] hub 4-0:1.0: USB hub found
>[    3.480823] hub 4-0:1.0: 2 ports detected
>[    3.584162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.584170] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.584176] usb usb4: Product: UHCI Host Controller
>[    3.584180] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>[    3.584185] usb usb4: SerialNumber: 0000:00:1d.0
>[    3.584382] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>[    3.584406] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>[    3.584416] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    3.584468] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>[    3.584546] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>[    3.584726] usb usb5: configuration #1 chosen from 1 choice
>[    3.584790] hub 5-0:1.0: USB hub found
>[    3.584802] hub 5-0:1.0: 2 ports detected
>[    3.690427] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.690435] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.690442] usb usb5: Product: UHCI Host Controller
>[    3.690446] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>[    3.690451] usb usb5: SerialNumber: 0000:00:1d.1
>[    3.690599] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>[    3.690624] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>[    3.690633] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    3.690697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>[    3.690770] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>[    3.690984] usb usb6: configuration #1 chosen from 1 choice
>[    3.691052] hub 6-0:1.0: USB hub found
>[    3.691065] hub 6-0:1.0: 2 ports detected
>[    3.793727] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.793734] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.796692] usb usb6: Product: UHCI Host Controller
>[    3.796692] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>[    3.796692] usb usb6: SerialNumber: 0000:00:1d.2
>[    3.796692] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>[    3.796692] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>[    3.796692] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    3.796692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>[    3.802072] ehci_hcd 0000:00:1d.7: debug port 1
>[    3.802072] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>[    3.802072] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>[    3.815381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    3.815532] usb usb7: configuration #1 chosen from 1 choice
>[    3.815598] hub 7-0:1.0: USB hub found
>[    3.815611] hub 7-0:1.0: 6 ports detected
>[    3.919491] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>[    3.919499] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.919505] usb usb7: Product: EHCI Host Controller
>[    3.919509] usb usb7: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
>[    3.919514] usb usb7: SerialNumber: 0000:00:1d.7
>[    3.922957] ahci 0000:00:1f.2: version 3.0
>[    3.922957] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>[    4.035038] Clocksource tsc unstable (delta = -292078720 ns)
>[    4.148882] usb 1-2: new full speed USB device using uhci_hcd and address 2
>[    4.323896] usb 1-2: configuration #1 chosen from 1 choice
>[    4.324853] usb 1-2: New USB device found, idVendor=0483, idProduct=2016
>[    4.324853] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.324853] usb 1-2: Product: Biometric Coprocessor
>[    4.324853] usb 1-2: Manufacturer: STMicroelectronics
>[    4.928779] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>[    4.928789] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>[    4.928804] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>[    4.932712] scsi0 : ahci
>[    4.932960] scsi1 : ahci
>[    4.933395] scsi2 : ahci
>[    4.933395] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 218
>[    4.933395] ata2: DUMMY
>[    4.933395] ata3: DUMMY
>[    5.252672] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    5.254205] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>[    5.254205] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    5.254348] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>[    5.254348] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    5.255636] ata1.00: ATA-7: HITACHI HTS541616J9SA00, SB4IC7UP, max UDMA/100
>[    5.255676] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    5.257867] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>[    5.257867] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    5.258010] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>[    5.258010] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    5.261778] ata1.00: configured for UDMA/100
>[    5.264721] ata1.00: configured for UDMA/100
>[    5.264721] ata1: EH complete
>[    5.264721] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54161 SB4I PQ: 0 ANSI: 5
>[    5.277271] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
>[    5.277332] ricoh-mmc: Controller is now disabled.
>[    5.277401] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
>[    5.277452] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>[    5.278484] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
>[    5.278501] PCI: Setting latency timer of device 0000:15:00.2 to 64
>[    5.280557] mmc0: SDHCI at 0xf8301800 irq 18 DMA
>[    5.280702] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>[    5.280720] PCI: Setting latency timer of device 0000:15:00.1 to 64
>[    5.334163] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8301000-f83017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>[    5.340186] Uniform Multi-Platform E-IDE driver
>[    5.340186] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>[    5.342749] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at  PCI slot 0000:00:1f.1
>[    5.342773] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>[    5.342795] ICH8M: not 100% native mode: will probe irqs later
>[    5.342820] ICH8M: IDE port disabled
>[    5.342835]     ide0: BM-DMA at 0x1c00-0x1c07
>[    5.342849] Probing IDE interface ide0...
>[    5.385173] Driver 'sd' needs updating - please use bus_type methods
>[    5.388366] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>[    5.388366] sd 0:0:0:0: [sda] Write Protect is off
>[    5.388366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.388366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.388366] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>[    5.388366] sd 0:0:0:0: [sda] Write Protect is off
>[    5.388366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.388366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.388366]  sda: sda1 sda2
>[    5.802139] sd 0:0:0:0: [sda] Attached SCSI disk
>[    6.079033] hda: Optiarc DVD RW AD-7910A, ATAPI CD/DVD-ROM drive
>[    6.614912] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a19c047]
>[    6.753197] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[    6.753609] hda: UDMA/33 mode selected
>[    6.754195] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[    6.790557] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>[    6.790557] Uniform CD-ROM driver Revision: 3.20
>[    6.911724] device-mapper: uevent: version 1.0.3
>[    6.917030] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>[    7.179216] PM: Starting manual resume from disk
>[    7.279853] kjournald starting.  Commit interval 5 seconds
>[    7.279853] EXT3-fs: mounted filesystem with ordered data mode.
>[    9.211735] udevd version 125 started
>[    9.755637] Non-volatile memory driver v1.2
>[   10.110722] thinkpad_acpi: ThinkPad ACPI Extras v0.20
>[   10.110722] thinkpad_acpi: http://ibm-acpi.sf.net/
>[   10.110722] thinkpad_acpi: ThinkPad BIOS 7LET56WW (1.26 ), EC 7KHT22WW-1.06
>[   10.110722] thinkpad_acpi: Lenovo ThinkPad T61, model 64665WG
>[   10.110722] thinkpad_acpi: radio switch found; radios are enabled
>[   10.110722] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[   10.110722] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[   10.146723] Registered led device: tpacpi::thinklight
>[   10.146723] Registered led device: tpacpi::power
>[   10.146723] Registered led device: tpacpi:orange:batt
>[   10.146723] Registered led device: tpacpi:green:batt
>[   10.146723] Registered led device: tpacpi::dock_active
>[   10.146723] Registered led device: tpacpi::bay_active
>[   10.146723] Registered led device: tpacpi::dock_batt
>[   10.146723] Registered led device: tpacpi::unknown_led
>[   10.146723] Registered led device: tpacpi::standby
>[   10.150716] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>[   10.150716] thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>[   10.150716] input: ThinkPad Extra Buttons as /class/input/input1
>[   10.230809] Linux agpgart interface v0.103
>[   10.246814] agpgart: Detected an Intel 965GM Chipset.
>[   10.246814] agpgart: Detected 7676K stolen memory.
>[   10.265997] agpgart: AGP aperture is 256M @ 0xe0000000
>[   10.403223] input: Power Button (FF) as /class/input/input2
>[   10.456187] ACPI: Power Button (FF) [PWRF]
>[   10.456332] input: Lid Switch as /class/input/input3
>[   10.491227] ACPI: Lid Switch [LID]
>[   10.491227] input: Sleep Button (CM) as /class/input/input4
>[   10.538934] ACPI: Sleep Button (CM) [SLPB]
>[   10.814701] ACPI: WMI: Mapper loaded
>[   11.476820] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>[   11.476858] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>[   11.476895] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>[   11.495471] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>[   11.495486] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>[   11.495550] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>[   11.507293] ACPI: AC Adapter [AC] (off-line)
>[   11.519437] ACPI: device:03 is registered as cooling_device2
>[   11.519888] input: Video Bus as /class/input/input5
>[   11.581383] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[   11.584818] ACPI: device:08 is registered as cooling_device3
>[   11.585377] input: Video Bus as /class/input/input6
>[   11.620814] ACPI: Battery Slot [BAT0] (battery present)
>[   11.629337] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>[   11.776709] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>[   11.776717] iwl3945: Copyright(c) 2003-2008 Intel Corporation
>[   11.892395] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>[   11.892395] PCI: Setting latency timer of device 0000:03:00.0 to 64
>[   11.892395] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>[   11.953966] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>[   11.967076] phy0: Selected rate control algorithm 'iwl-3945-rs'
>[   12.178910] input: PC Speaker as /class/input/input7
>[   12.225087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>[   12.227126] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>[   12.227182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   12.358201] Error: Driver 'pcspkr' is already registered, aborting...
>[   12.406472] ACPI: PCI interrupt for device 0000:03:00.0 disabled
>[   12.407174] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>[   12.479585] Error: Driver 'pcspkr' is already registered, aborting...
>[   12.655399] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
>[   12.783816] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>[   12.783816] Socket status: 30000006
>[   12.783816] pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
>[   12.783816] cs: IO port probe 0x7000-0xafff: clean.
>[   12.783816] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>[   12.783816] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>[   12.959590] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>[   12.959600] serio: Synaptics pass-through port at isa0060/serio1/input0
>[   13.000551] input: SynPS/2 Synaptics TouchPad as /class/input/input8
>[   13.859188] cs: IO port probe 0x100-0x3af: clean.
>[   13.865828] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>[   13.868469] cs: IO port probe 0x820-0x8ff: clean.
>[   13.869644] cs: IO port probe 0xc00-0xcf7: clean.
>[   13.871061] cs: IO port probe 0xa00-0xaff: clean.
>[   14.303290] EXT3 FS on dm-0, internal journal
>[   15.073643] loop: module loaded
>[   15.858671] fuse init (API version 7.9)
>[   15.956199] kjournald starting.  Commit interval 5 seconds
>[   15.964814] EXT3 FS on sda1, internal journal
>[   15.964814] EXT3-fs: mounted filesystem with ordered data mode.
>[   16.006708] kjournald starting.  Commit interval 5 seconds
>[   16.006871] EXT3 FS on dm-5, internal journal
>[   16.006871] EXT3-fs: mounted filesystem with ordered data mode.
>[   16.024416] kjournald starting.  Commit interval 5 seconds
>[   16.035650] EXT3 FS on dm-4, internal journal
>[   16.035650] EXT3-fs: mounted filesystem with ordered data mode.
>[   16.071828] kjournald starting.  Commit interval 5 seconds
>[   16.072275] EXT3 FS on dm-1, internal journal
>[   16.072275] EXT3-fs: mounted filesystem with ordered data mode.
>[   16.113153] kjournald starting.  Commit interval 5 seconds
>[   16.118958] EXT3 FS on dm-2, internal journal
>[   16.118958] EXT3-fs: mounted filesystem with ordered data mode.
>[   16.314358] Adding 2719736k swap on /dev/mapper/jobi--t61-swap_1.  Priority:-1 extents:1 across:2719736k
>[   18.703513] IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[   18.941536] input: TPPS/2 IBM TrackPoint as /class/input/input9
>[   25.473109] NET: Registered protocol family 10
>[   25.476884] lo: Disabled Privacy Extensions
>[   25.476884] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   26.414171] lp: driver loaded but no devices found
>[   26.496686] ppdev: user-space parallel port driver
>[   31.682094] Bluetooth: Core ver 2.11
>[   31.682094] NET: Registered protocol family 31
>[   31.682094] Bluetooth: HCI device and connection manager initialized
>[   31.682094] Bluetooth: HCI socket layer initialized
>[   31.816617] Bluetooth: L2CAP ver 2.9
>[   31.816617] Bluetooth: L2CAP socket layer initialized
>[   31.900848] Bluetooth: RFCOMM socket layer initialized
>[   31.900871] Bluetooth: RFCOMM TTY layer initialized
>[   31.900877] Bluetooth: RFCOMM ver 1.8
>[   32.504988] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>[   32.505175] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>[   32.505508] firmware: requesting iwlwifi-3945-1.ucode
>[   32.686955] Registered led device: iwl-phy0:radio
>[   32.686955] Registered led device: iwl-phy0:assoc
>[   32.686955] Registered led device: iwl-phy0:RX
>[   32.686955] Registered led device: iwl-phy0:TX
>[   32.693743] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   38.428861] [drm] Initialized drm 1.1.0 20060810
>[   38.433732] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[   38.433732] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[   38.433732] [drm] Initialized i915 1.6.0 20060119 on minor 0
>[   38.628861] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[   64.193299] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
>[   72.118955] CPU0 attaching NULL sched-domain.
>[   72.118969] CPU1 attaching NULL sched-domain.
>[   72.144118] CPU0 attaching sched-domain:
>[   72.144149]  domain 0: span 0-1
>[   72.144154]   groups: 0 1
>[   72.144163]   domain 1: span 0-1
>[   72.144168]    groups: 0-1
>[   72.144194] CPU1 attaching sched-domain:
>[   72.144199]  domain 0: span 0-1
>[   72.144203]   groups: 1 0
>[   72.144211]   domain 1: span 0-1
>[   72.144215]    groups: 0-1
>[   84.679081] wlan0: Initial auth_alg=0
>[   84.679081] wlan0: authenticate with AP 00:90:d0:dc:4c:3e
>[   84.687814] wlan0: RX authentication from 00:90:d0:dc:4c:3e (alg=0 transaction=2 status=0)
>[   84.687814] wlan0: authenticated
>[   84.687814] wlan0: associate with AP 00:90:d0:dc:4c:3e
>[   84.692243] wlan0: RX AssocResp from 00:90:d0:dc:4c:3e (capab=0x411 status=0 aid=3)
>[   84.692243] wlan0: associated
>[   84.692243] wlan0: switched to short barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[   84.692243] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   94.916114] wlan0: no IPv6 routers present
>[  110.953710] wlan0: no IPv6 routers present
>[  217.755542] wlan0: switched to long barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  229.554634] wlan0: switched to short barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  278.146236] wlan0: switched to long barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  290.988869] wlan0: switched to short barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  398.457952] wlan0: switched to long barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  409.230429] wlan0: switched to short barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  451.764442] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[  460.574863] CPU0 attaching NULL sched-domain.
>[  460.574863] CPU1 attaching NULL sched-domain.
>[  460.601465] CPU0 attaching sched-domain:
>[  460.601473]  domain 0: span 0-1
>[  460.601475]   groups: 0 1
>[  460.601479]   domain 1: span 0-1
>[  460.601480]    groups: 0-1
>[  460.601484] CPU1 attaching sched-domain:
>[  460.601486]  domain 0: span 0-1
>[  460.601487]   groups: 1 0
>[  460.601491]   domain 1: span 0-1
>[  460.601492]    groups: 0-1
>[  518.639878] wlan0: switched to long barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  529.552992] wlan0: switched to short barker preamble (BSSID=00:90:d0:dc:4c:3e)
>[  639.485542] wlan0: switched to long barker preamble (BSSID=00:90:d0:dc:4c:3e)

Actions: View

Attachments on bug 17583: 19063 | 19064 | 19065 | 19066

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.