Attachment 17757 Details for Bug 16777 – dmesg output

dmesg output

dmesg.txt (text/plain), 37.70 KB, created by Hugh Eaves on 2008-07-18 12:31:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hugh Eaves

Created: 2008-07-18 12:31:48 UTC

Size: 37.70 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.24-19-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:15:37 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
>[    0.000000] Command line: root=UUID=36D29574D2953957 loop=/ubuntu/disks/root.disk ro quiet splash
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
>[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
>[    0.000000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf750000 (usable)
>[    0.000000]  BIOS-e820: 00000000cf750000 - 00000000d0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>[    0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>[    0.000000] Entering add_active_range(0, 256, 849744) 1 entries of 3200 used
>[    0.000000] end_pfn_map = 1048576
>[    0.000000] DMI 2.4 present.
>[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F01E0 checksum 0
>[    0.000000] ACPI: RSDP 000F01E0, 0014 (r0 TOSHIB)
>[    0.000000] ACPI: RSDT CF750000, 0058 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: FACP CF750080, 0084 (r2 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: DSDT CF750104, 4C74 (r2 TOSHIB A003C    20071207 MSFT  100000E)
>[    0.000000] ACPI: FACS 000EEE00, 0040
>[    0.000000] ACPI: SSDT CF754D78, 0306 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[    0.000000] ACPI: DBGP CF7559D4, 0034 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: BOOT CF750058, 0028 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: APIC CF755930, 0068 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: MCFG CF755998, 003C (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: HPET CF755A08, 0038 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: TCPA CF755BB6, 0032 (r2 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: SLIC CF755A40, 0176 (r1 TOSHIB A003C    20060821 TASM  4010000)
>[    0.000000] ACPI: SSDT CF755BE8, 092C (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[    0.000000] ACPI: SSDT CF75805A, 1574 (r2 TOSHIB A003C    20070222 MSFT  100000E)
>[    0.000000] ACPI: SSDT CF7595CE, 0081 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[    0.000000] ACPI: SSDT CF75964F, 0327 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[    0.000000] ACPI: DMI detected: Toshiba
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-00000000cf750000
>[    0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>[    0.000000] Entering add_active_range(0, 256, 849744) 1 entries of 3200 used
>[    0.000000] Bootmem setup node 0 0000000000000000-00000000cf750000
>[    0.000000] No mptable found.
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA             0 ->     4096
>[    0.000000]   DMA32        4096 ->  1048576
>[    0.000000]   Normal    1048576 ->  1048576
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0:        0 ->      158
>[    0.000000]     0:      256 ->   849744
>[    0.000000] On node 0 totalpages: 849646
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 1220 pages reserved
>[    0.000000]   DMA zone: 2722 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11561 pages used for memmap
>[    0.000000]   DMA32 zone: 834087 pages, LIFO batch:31
>[    0.000000]   Normal zone: 0 pages used for memmap
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] ACPI: PM-Timer IO Port: 0xd808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] Processor #0 (Bootup-CPU)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] Processor #1
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Setting APIC routing to flat
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000ee000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000ee000 - 00000000000ef000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 836809
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: root=UUID=36D29574D2953957 loop=/ubuntu/disks/root.disk ro quiet splash
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
>[    0.000000] hpet clockevent registered
>[    0.000000] TSC calibrated against HPET
>[   24.345451] time.c: Detected 2161.249 MHz processor.
>[   24.346762] Console: colour VGA+ 80x25
>[   24.346765] console [tty0] enabled
>[   24.346785] Checking aperture...
>[   24.346797] Calgary: detecting Calgary via BIOS EBDA area
>[   24.346799] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[   24.390721] Memory: 3338516k/3398976k available (2489k kernel code, 60068k reserved, 1318k data, 320k init)
>[   24.390761] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>[   24.467229] Calibrating delay using timer specific routine.. 4327.17 BogoMIPS (lpj=8654355)
>[   24.467263] Security Framework initialized
>[   24.467270] SELinux:  Disabled at boot.
>[   24.467284] AppArmor: AppArmor initialized
>[   24.467288] Failure registering capabilities with primary security module.
>[   24.467652] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[   24.470745] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[   24.472472] Mount-cache hash table entries: 256
>[   24.472627] Initializing cgroup subsys ns
>[   24.472633] Initializing cgroup subsys cpuacct
>[   24.472650] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   24.472652] CPU: L2 cache: 4096K
>[   24.472654] CPU 0/0 -> Node 0
>[   24.472656] using mwait in idle threads.
>[   24.472657] CPU: Physical Processor ID: 0
>[   24.472658] CPU: Processor Core ID: 0
>[   24.472664] CPU0: Thermal monitoring handled by SMI
>[   24.472679] SMP alternatives: switching to UP code
>[   24.473451] Early unpacking initramfs... done
>[   24.830648] ACPI: Core revision 20070126
>[   24.830686] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>[   24.873617] Using local APIC timer interrupts.
>[   24.919812] APIC timer calibration result 10390633
>[   24.919814] Detected 10.390 MHz APIC timer.
>[   24.919893] SMP alternatives: switching to SMP code
>[   24.920558] Booting processor 1/2 APIC 0x1
>[   24.931091] Initializing CPU#1
>[   25.007670] Calibrating delay using timer specific routine.. 4322.54 BogoMIPS (lpj=8645085)
>[   25.007676] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   25.007677] CPU: L2 cache: 4096K
>[   25.007679] CPU 1/1 -> Node 0
>[   25.007680] CPU: Physical Processor ID: 0
>[   25.007681] CPU: Processor Core ID: 1
>[   25.007687] CPU1: Thermal monitoring enabled (TM2)
>[   25.008165] Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>[   25.008258] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[   25.028248] Brought up 2 CPUs
>[   25.028327] CPU0 attaching sched-domain:
>[   25.028329]  domain 0: span 03
>[   25.028331]   groups: 01 02
>[   25.028333]   domain 1: span 03
>[   25.028334]    groups: 03
>[   25.028336] CPU1 attaching sched-domain:
>[   25.028337]  domain 0: span 03
>[   25.028338]   groups: 02 01
>[   25.028340]   domain 1: span 03
>[   25.028341]    groups: 03
>[   25.028553] net_namespace: 120 bytes
>[   25.028882] Time: 14:37:19  Date: 07/18/08
>[   25.028907] NET: Registered protocol family 16
>[   25.029077] ACPI: bus type pci registered
>[   25.029142] PCI: Using configuration type 1
>[   25.030136] ACPI: EC: Look up EC in DSDT
>[   25.033682] ACPI: Interpreter enabled
>[   25.033684] ACPI: (supports S0 S3 S4 S5)
>[   25.033697] ACPI: Using IOAPIC for interrupt routing
>[   25.039204] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[   25.040158] PCI quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
>[   25.040162] PCI quirk: region eec0-eeff claimed by ICH6 GPIO
>[   25.041341] PCI: Transparent bridge - 0000:00:1e.0
>[   25.041418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[   25.041517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[   25.041607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>[   25.041683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
>[   25.044558] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>[   25.044679] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
>[   25.044800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
>[   25.044919] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
>[   25.045038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
>[   25.045251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
>[   25.045373] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
>[   25.045494] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
>[   25.045601] ACPI: Power Resource [PDOC] (off)
>[   25.045659] Linux Plug and Play Support v0.97 (c) Adam Belay
>[   25.045688] pnp: PnP ACPI init
>[   25.045694] ACPI: bus type pnp registered
>[   25.046486] pnpacpi: exceeded the max number of mem resources: 12
>[   25.047952] pnpacpi: exceeded the max number of IO resources: 40 
>[   25.050232] pnp: PnP ACPI: found 13 devices
>[   25.050234] ACPI: ACPI bus type pnp unregistered
>[   25.050440] PCI: Using ACPI for IRQ routing
>[   25.050441] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>[   25.063595] NET: Registered protocol family 8
>[   25.063597] NET: Registered protocol family 20
>[   25.063626] PCI-GART: No AMD northbridge found.
>[   25.063633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[   25.063636] hpet0: 3 64-bit timers, 14318180 Hz
>[   25.064673] AppArmor: AppArmor Filesystem Enabled
>[   25.067569] Time: tsc clocksource has been installed.
>[   25.067578] Switched to high resolution mode on CPU 0
>[   25.068175] Switched to high resolution mode on CPU 1
>[   25.075546] system 00:00: iomem range 0x0-0x9ffff could not be reserved
>[   25.075549] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>[   25.075552] system 00:00: iomem range 0x100000-0xcf74ffff could not be reserved
>[   25.075554] system 00:00: iomem range 0xcf750000-0xcf75ffff could not be reserved
>[   25.075557] system 00:00: iomem range 0xcf760000-0xcf7fffff could not be reserved
>[   25.075560] system 00:00: iomem range 0xcf800000-0xcfffffff could not be reserved
>[   25.075562] system 00:00: iomem range 0xfec00000-0xfec17fff could not be reserved
>[   25.075565] system 00:00: iomem range 0xfec20000-0xfec27fff could not be reserved
>[   25.075567] system 00:00: iomem range 0xfed14000-0xfed19fff could not be reserved
>[   25.075570] system 00:00: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>[   25.075572] system 00:00: iomem range 0xfed20000-0xfed3ffff could not be reserved
>[   25.075575] system 00:00: iomem range 0xfed45000-0xfed8ffff could not be reserved
>[   25.075580] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
>[   25.075587] system 00:09: ioport range 0x1e0-0x1ef has been reserved
>[   25.075589] system 00:09: ioport range 0x480-0x48f has been reserved
>[   25.075592] system 00:09: ioport range 0xe000-0xe07f has been reserved
>[   25.075594] system 00:09: ioport range 0xe080-0xe0ff has been reserved
>[   25.075596] system 00:09: ioport range 0xe400-0xe47f has been reserved
>[   25.075601] system 00:09: ioport range 0xe480-0xe4ff has been reserved
>[   25.075604] system 00:09: ioport range 0xe800-0xe87f has been reserved
>[   25.075606] system 00:09: ioport range 0xe880-0xe8ff has been reserved
>[   25.075608] system 00:09: ioport range 0xec00-0xec7f has been reserved
>[   25.075611] system 00:09: ioport range 0xec80-0xecff has been reserved
>[   25.075613] system 00:09: ioport range 0xd800-0xd87f has been reserved
>[   25.075615] system 00:09: ioport range 0xd880-0xd89f has been reserved
>[   25.075618] system 00:09: ioport range 0xeeb0-0xeebf has been reserved
>[   25.075620] system 00:09: ioport range 0xeec0-0xeeff has been reserved
>[   25.075623] system 00:09: ioport range 0x690-0x6ff has been reserved
>[   25.075976] PCI: Bridge: 0000:00:1c.0
>[   25.075978]   IO window: b000-bfff
>[   25.075984]   MEM window: ffc00000-ffcfffff
>[   25.075987]   PREFETCH window: disabled.
>[   25.075992] PCI: Bridge: 0000:00:1c.2
>[   25.075993]   IO window: disabled.
>[   25.075998]   MEM window: ffa00000-ffafffff
>[   25.076002]   PREFETCH window: disabled.
>[   25.076029] PCI: Bus 4, cardbus bridge: 0000:03:0b.0
>[   25.076030]   IO window: 00001000-000010ff
>[   25.076035]   IO window: 00001400-000014ff
>[   25.076039]   PREFETCH window: d8000000-dbffffff
>[   25.076044]   MEM window: dc000000-dfffffff
>[   25.076048] PCI: Bridge: 0000:00:1e.0
>[   25.076049]   IO window: disabled.
>[   25.076054]   MEM window: disabled.
>[   25.076058]   PREFETCH window: disabled.
>[   25.076085] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>[   25.076091] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[   25.076113] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>[   25.076118] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>[   25.076130] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>[   25.076146] PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
>[   25.076150] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 21
>[   25.076164] NET: Registered protocol family 2
>[   25.111588] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[   25.112642] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[   25.118225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[   25.119109] TCP: Hash tables configured (established 524288 bind 65536)
>[   25.119112] TCP reno registered
>[   25.127599] checking if image is initramfs... it is
>[   25.824652] Freeing initrd memory: 8463k freed
>[   25.829048] Simple Boot Flag value 0xb read from CMOS RAM was invalid
>[   25.829053] Simple Boot Flag at 0x7c set to 0x1
>[   25.829902] audit: initializing netlink socket (disabled)
>[   25.829925] audit(1216391840.428:1): initialized
>[   25.831964] VFS: Disk quotas dquot_6.5.1
>[   25.832025] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[   25.832137] io scheduler noop registered
>[   25.832139] io scheduler anticipatory registered
>[   25.832140] io scheduler deadline registered
>[   25.832244] io scheduler cfq registered (default)
>[   25.832256] Boot video device is 0000:00:02.0
>[   25.834656] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[   25.834709] assign_interrupt_mode Found MSI capability
>[   25.834754] Allocate Port Service[0000:00:1c.0:pcie00]
>[   25.834855] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>[   25.834907] assign_interrupt_mode Found MSI capability
>[   25.834950] Allocate Port Service[0000:00:1c.2:pcie00]
>[   25.857500] Real Time Clock Driver v1.12ac
>[   25.857646] hpet_resources: 0xfed00000 is busy
>[   25.857678] Linux agpgart interface v0.102
>[   25.857680] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>[   25.858567] 00:0c: ttyS0 at I/O 0x338 (irq = 4) is a 16550A
>[   25.859206] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
>[   25.859263] input: Macintosh mouse button emulation as /devices/virtual/input/input0
>[   25.859350] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[   25.864023] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   25.864027] serio: i8042 AUX port at 0x60,0x64 irq 12
>[   25.874229] mice: PS/2 mouse device common for all mice
>[   25.874259] cpuidle: using governor ladder
>[   25.874261] cpuidle: using governor menu
>[   25.874379] NET: Registered protocol family 1
>[   25.874465] registered taskstats version 1
>[   25.874568]   Magic number: 0:424:637
>[   25.874632] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>[   25.874634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[   25.874636] EDD information not available.
>[   25.874643] Freeing unused kernel memory: 320k freed
>[   25.913769] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>[   27.056318] fuse init (API version 7.9)
>[   27.086119] ACPI: SSDT CF7553C0, 00F3 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[   27.086240] ACPI: SSDT CF755529, 034E (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[   27.086672] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>[   27.086729] ACPI: SSDT CF7554B3, 0076 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[   27.086838] ACPI: SSDT CF755877, 0079 (r2 TOSHIB A003C    20060907 MSFT  100000E)
>[   27.087303] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>[   27.087991] ACPI: Thermal Zone [THRM] (80 C)
>[   27.096015] Marking TSC unstable due to TSC halts in idle
>[   27.096023] Time: hpet clocksource has been installed.
>[   27.355400] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>[   27.355404] Copyright (c) 1999-2006 Intel Corporation.
>[   27.355474] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[   27.355492] PCI: Setting latency timer of device 0000:01:00.0 to 64
>[   27.411201] e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:7e:25:56:1c
>[   27.413893] usbcore: registered new interface driver usbfs
>[   27.413914] usbcore: registered new interface driver hub
>[   27.416658] usbcore: registered new device driver usb
>[   27.440135] USB Universal Host Controller Interface driver v3.0
>[   27.458412] SCSI subsystem initialized
>[   27.469006] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>[   27.469051] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>[   27.469062] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>[   27.469066] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[   27.469315] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[   27.469346] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
>[   27.469455] usb usb1: configuration #1 chosen from 1 choice
>[   27.469473] hub 1-0:1.0: USB hub found
>[   27.469478] hub 1-0:1.0: 2 ports detected
>[   27.487252] libata version 3.00 loaded.
>[   27.571309] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>[   27.571320] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>[   27.571324] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[   27.571344] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>[   27.571373] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
>[   27.571463] usb usb2: configuration #1 chosen from 1 choice
>[   27.571482] hub 2-0:1.0: USB hub found
>[   27.571486] hub 2-0:1.0: 2 ports detected
>[   27.675138] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>[   27.675149] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>[   27.675152] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[   27.675170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>[   27.675201] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60
>[   27.675294] usb usb3: configuration #1 chosen from 1 choice
>[   27.675312] hub 3-0:1.0: USB hub found
>[   27.675317] hub 3-0:1.0: 2 ports detected
>[   27.778965] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>[   27.778977] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>[   27.778980] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[   27.779001] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>[   27.779032] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40
>[   27.779129] usb usb4: configuration #1 chosen from 1 choice
>[   27.779148] hub 4-0:1.0: USB hub found
>[   27.779152] hub 4-0:1.0: 2 ports detected
>[   27.808185] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>[   27.809497] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>[   27.809504] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[   27.809551] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>[   27.813472] ehci_hcd 0000:00:1d.7: debug port 1
>[   27.813479] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>[   27.813485] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffd3fc00
>[   27.819823] Clocksource tsc unstable (delta = -74959478 ns)
>[   27.838495] usb 2-1: new full speed USB device using uhci_hcd and address 2
>[   27.839417] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[   27.839600] usb usb5: configuration #1 chosen from 1 choice
>[   27.839638] hub 5-0:1.0: USB hub found
>[   27.839648] hub 5-0:1.0: 8 ports detected
>[   27.846990] PCI: Enabling device 0000:03:0b.1 (0000 -> 0002)
>[   27.847004] ACPI: PCI Interrupt 0000:03:0b.1[B] -> GSI 20 (level, low) -> IRQ 20
>[   27.897094] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[d408a000-d408a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[   27.897414] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>[   27.897450] PCI: Setting latency timer of device 0000:00:1f.1 to 64
>[   27.897461] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>[   27.897624] ahci 0000:00:1f.2: version 3.0
>[   27.897645] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>[   27.898549] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
>[   27.898553] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
>[   27.938575] usb 5-6: new high speed USB device using ehci_hcd and address 3
>[   28.066671] usb 5-6: configuration #1 chosen from 1 choice
>[   28.066816] hub 5-6:1.0: USB hub found
>[   28.066904] hub 5-6:1.0: 4 ports detected
>[   28.409577] usb 2-1: new full speed USB device using uhci_hcd and address 3
>[   28.425578] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>[   28.425581] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part 
>[   28.425586] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>[   28.426222] scsi0 : ahci
>[   28.426282] scsi1 : ahci
>[   28.426333] scsi2 : ahci
>[   28.426388] scsi3 : ahci
>[   28.427264] ata1: SATA max UDMA/133 abar m1024@0xffd3f800 port 0xffd3f900 irq 509
>[   28.427268] ata2: SATA max UDMA/133 abar m1024@0xffd3f800 port 0xffd3f980 irq 509
>[   28.427271] ata3: SATA max UDMA/133 abar m1024@0xffd3f800 port 0xffd3fa00 irq 509
>[   28.427273] ata4: SATA max UDMA/133 abar m1024@0xffd3f800 port 0xffd3fa80 irq 509
>[   28.581618] usb 2-1: configuration #1 chosen from 1 choice
>[   28.693152] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00003900007d8b9a]
>[   28.781079] usb 5-6.1: new high speed USB device using ehci_hcd and address 4
>[   28.873298] usb 5-6.1: configuration #1 chosen from 1 choice
>[   28.873453] hub 5-6.1:1.0: USB hub found
>[   28.873542] hub 5-6.1:1.0: 2 ports detected
>[   28.904713] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   28.905124] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
>[   28.905126] ata1.00: 488397168 sectors, multi 0: LBA48 
>[   28.905609] ata1.00: configured for UDMA/100
>[   29.176305] usb 5-6.1.1: new high speed USB device using ehci_hcd and address 5
>[   29.212176] ata2: SATA link down (SStatus 0 SControl 0)
>[   29.268626] usb 5-6.1.1: configuration #1 chosen from 1 choice
>[   29.268784] hub 5-6.1.1:1.0: USB hub found
>[   29.268874] hub 5-6.1.1:1.0: 4 ports detected
>[   29.523634] ata3: SATA link down (SStatus 0 SControl 300)
>[   29.571615] usb 5-6.1.2: new low speed USB device using ehci_hcd and address 6
>[   29.668641] usb 5-6.1.2: configuration #1 chosen from 1 choice
>[   29.835090] ata4: SATA link down (SStatus 0 SControl 0)
>[   29.835205] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
>[   29.835308] ata_piix 0000:00:1f.1: version 2.12
>[   29.835324] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>[   29.835357] PCI: Setting latency timer of device 0000:00:1f.1 to 64
>[   29.835418] scsi4 : ata_piix
>[   29.835458] scsi5 : ata_piix
>[   29.836012] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf10 irq 14
>[   29.836015] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf18 irq 15
>[   29.840307] Driver 'sd' needs updating - please use bus_type methods
>[   29.851089] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>[   29.851098] sd 0:0:0:0: [sda] Write Protect is off
>[   29.851100] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   29.851113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   29.851149] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>[   29.851157] sd 0:0:0:0: [sda] Write Protect is off
>[   29.851158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   29.851170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   29.851173]  sda:<6>usb 5-6.1.1.1: new high speed USB device using ehci_hcd and address 7
>[   29.905701]  sda1
>[   29.905755] sd 0:0:0:0: [sda] Attached SCSI disk
>[   29.908528] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   30.023309] usb 5-6.1.1.1: configuration #1 chosen from 1 choice
>[   30.159106] ata5.00: ATAPI: MATSHITADVD-RAM UJ-842S, 1.01, max UDMA/33
>[   30.238489] usb 5-6.1.1.2: new low speed USB device using ehci_hcd and address 8
>[   30.326730] ata5.00: configured for UDMA/33
>[   30.326777] ata6: port disabled. ignoring.
>[   30.329116] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842S  1.01 PQ: 0 ANSI: 5
>[   30.329178] scsi 4:0:0:0: Attached scsi generic sg1 type 5
>[   30.336626] Driver 'sr' needs updating - please use bus_type methods
>[   30.338138] usb 5-6.1.1.2: configuration #1 chosen from 1 choice
>[   30.338943] usbcore: registered new interface driver hiddev
>[   30.340610] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6.1/5-6.1.2/5-6.1.2:1.0/input/input2
>[   30.351171] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[   30.351177] Uniform CD-ROM driver Revision: 3.20
>[   30.351245] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[   30.370180] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-6.1.2
>[   30.372715] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6.1/5-6.1.1/5-6.1.1.2/5-6.1.1.2:1.0/input/input3
>[   30.398159] input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:1d.7-6.1.1.2
>[   30.402849] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6.1/5-6.1.1/5-6.1.1.2/5-6.1.1.2:1.1/input/input4
>[   30.422241] input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:1d.7-6.1.1.2
>[   30.422267] usbcore: registered new interface driver usbhid
>[   30.422272] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>[   30.422663] usbcore: registered new interface driver libusual
>[   30.446021] Initializing USB Mass Storage driver...
>[   30.446759] scsi6 : SCSI emulation for USB Mass Storage devices
>[   30.447204] usbcore: registered new interface driver usb-storage
>[   30.447208] USB Mass Storage support registered.
>[   30.447279] usb-storage: device found at 7
>[   30.447280] usb-storage: waiting for device to settle before scanning
>[   30.802688] loop: module loaded
>[   30.821350] kjournald starting.  Commit interval 5 seconds
>[   30.821358] EXT3-fs: mounted filesystem with ordered data mode.
>[   35.443087] usb-storage: device scan complete
>[   35.447101] scsi 6:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
>[   35.450607] scsi 6:0:0:1: Direct-Access     Generic  Flash HS-MS      4.44 PQ: 0 ANSI: 0
>[   35.454483] scsi 6:0:0:2: Direct-Access     Generic  Flash HS-SM      4.44 PQ: 0 ANSI: 0
>[   35.457697] scsi 6:0:0:3: Direct-Access     Generic  Flash HS-SD/MMC  4.44 PQ: 0 ANSI: 0
>[   35.462078] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[   35.462108] sd 6:0:0:0: Attached scsi generic sg2 type 0
>[   35.466822] sd 6:0:0:1: [sdc] Attached SCSI removable disk
>[   35.466867] sd 6:0:0:1: Attached scsi generic sg3 type 0
>[   35.471457] sd 6:0:0:2: [sdd] Attached SCSI removable disk
>[   35.471508] sd 6:0:0:2: Attached scsi generic sg4 type 0
>[   35.522143] sd 6:0:0:3: [sde] Attached SCSI removable disk
>[   35.522197] sd 6:0:0:3: Attached scsi generic sg5 type 0
>[   38.381054] input: PC Speaker as /devices/platform/pcspkr/input/input5
>[   38.526929] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102
>[   38.526982] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x680, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>[   38.566992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[   38.576860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   38.600486] agpgart: Detected an Intel 945GM Chipset.
>[   38.602273] agpgart: Detected 7932K stolen memory.
>[   38.617624] agpgart: AGP aperture is 256M @ 0xe0000000
>[   38.649827] iTCO_vendor_support: vendor-support=0
>[   38.671653] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>[   38.724937] ACPI: Battery Slot [BAT1] (battery present)
>[   38.724976] ACPI: Battery Slot [BAT2] (battery absent)
>[   38.761899] input: Power Button (FF) as /devices/virtual/input/input6
>[   38.819386] ACPI: Power Button (FF) [PWRF]
>[   38.819476] input: Lid Switch as /devices/virtual/input/input7
>[   38.851395] ACPI: Lid Switch [LID]
>[   38.851444] input: Power Button (CM) as /devices/virtual/input/input8
>[   38.891591] input: PS/2 Mouse as /devices/virtual/input/input9
>[   38.915236] ACPI: Power Button (CM) [PWRB]
>[   38.915364] ACPI: AC Adapter [ADP1] (on-line)
>[   38.961765] Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
>[   38.961786] Yenta: Enabling burst memory read transactions
>[   38.961791] Yenta: Using CSCINT to route CSC interrupts to PCI
>[   38.961792] Yenta: Routing CardBus interrupts to PCI
>[   38.961797] Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1022, devctl 0x64
>[   39.005213] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
>[   39.064162] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0xd860)
>[   39.064199] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   39.188518] sdhci: Secure Digital Host Controller Interface driver
>[   39.188522] sdhci: Copyright(c) Pierre Ossman
>[   39.195573] Yenta: ISA IRQ mask 0x0cf8, PCI irq 21
>[   39.195576] Socket status: 30000006
>[   39.195578] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>[   39.206881] sdhci: SDHCI controller found at 0000:03:0b.3 [104c:803c] (rev 0)
>[   39.206906] PCI: Enabling device 0000:03:0b.3 (0000 -> 0002)
>[   39.206912] ACPI: PCI Interrupt 0000:03:0b.3[D] -> GSI 23 (level, low) -> IRQ 23
>[   39.207875] mmc0: SDHCI at 0xd408a800 irq 23 DMA
>[   39.324452] mmc0: new SD card at address bffc
>[   39.373425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
>[   39.430310] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
>[   39.435838] PCI: Enabling device 0000:03:0b.2 (0000 -> 0002)
>[   39.435845] ACPI: PCI Interrupt 0000:03:0b.2[D] -> GSI 23 (level, low) -> IRQ 23
>[   39.499707] intel_rng: FWH not detected
>[   39.599505] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
>[   39.599509] iwl3945: Copyright(c) 2003-2007 Intel Corporation
>[   39.599611] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>[   39.599625] PCI: Setting latency timer of device 0000:02:00.0 to 64
>[   39.600504] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>[   39.711248] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>[   39.711259] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>[   39.712275] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>[   40.451317] mmcblk0: mmc0:bffc SD02G 1985024KiB 
>[   40.451355]  mmcblk0: p1
>[   40.608052] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>[   40.608387] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>[   41.639532] lp: driver loaded but no devices found
>[   42.308541] EXT3 FS on loop0, internal journal
>[   53.916418] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
>[   54.355352] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   55.108106] ACPI: Error installing notify handler
>[   55.108153] No dock devices found.
>[   55.134578] ACPI: \_SB_.PCI0.FNC1.IDE0.HD_0: found ejectable bay
>[   55.134583] ACPI: \_SB_.PCI0.FNC1.IDE0.HD_0: Adding notify handler
>[   55.134607] ACPI: Error installing bay notify handler
>[   55.134609] ACPI: Bay [\_SB_.PCI0.FNC1.IDE0.HD_0] Added
>[   55.134616] ACPI: \_SB_.PCI0.FNC2.PRT2: found ejectable bay
>[   55.134619] ACPI: \_SB_.PCI0.FNC2.PRT2: Adding notify handler
>[   55.134633] ACPI: Error installing bay notify handler
>[   55.134635] ACPI: Bay [\_SB_.PCI0.FNC2.PRT2] Added
>[   55.194771] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
>[   55.194775] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
>[   55.195128] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
>[   55.195129] toshiba_acpi: ktoshkeyd will check 2 times per second
>[   55.195454] toshiba_acpi: Dropped 0 keys from the queue on startup
>[   56.226705] ppdev: user-space parallel port driver
>[   56.405117] audit(1216406271.923:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5455 profile="/usr/sbin/cupsd" namespace="default"
>[   57.521631] Bluetooth: Core ver 2.11
>[   57.521995] NET: Registered protocol family 31
>[   57.522000] Bluetooth: HCI device and connection manager initialized
>[   57.522005] Bluetooth: HCI socket layer initialized
>[   57.532111] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>[   57.532120] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>[   57.556174] Bluetooth: L2CAP ver 2.9
>[   57.556181] Bluetooth: L2CAP socket layer initialized
>[   57.662275] Bluetooth: RFCOMM socket layer initialized
>[   57.662290] Bluetooth: RFCOMM TTY layer initialized
>[   57.662291] Bluetooth: RFCOMM ver 1.8
>[   60.718603] NET: Registered protocol family 17
>[   71.247275] NET: Registered protocol family 10
>[   71.247687] lo: Disabled Privacy Extensions
>[   71.250265] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   76.808835] CPU0 attaching NULL sched-domain.
>[   76.808841] CPU1 attaching NULL sched-domain.
>[   76.834432] CPU0 attaching sched-domain:
>[   76.834438]  domain 0: span 03
>[   76.834440]   groups: 01 02
>[   76.834443]   domain 1: span 03
>[   76.834444]    groups: 03
>[   76.834446] CPU1 attaching sched-domain:
>[   76.834448]  domain 0: span 03
>[   76.834449]   groups: 02 01
>[   76.834451]   domain 1: span 03
>[   76.834453]    groups: 03
>[   82.751009] eth0: no IPv6 routers present
>[  250.353165] CPU0 attaching NULL sched-domain.
>[  250.353172] CPU1 attaching NULL sched-domain.
>[  250.378730] CPU0 attaching sched-domain:
>[  250.378737]  domain 0: span 03
>[  250.378739]   groups: 01 02
>[  250.378742]   domain 1: span 03
>[  250.378743]    groups: 03
>[  250.378745] CPU1 attaching sched-domain:
>[  250.378747]  domain 0: span 03
>[  250.378748]   groups: 02 01
>[  250.378750]   domain 1: span 03
>[  250.378752]    groups: 03
>[  315.299425] CPU0 attaching NULL sched-domain.
>[  315.299430] CPU1 attaching NULL sched-domain.
>[  315.324380] CPU0 attaching sched-domain:
>[  315.324387]  domain 0: span 03
>[  315.324389]   groups: 01 02
>[  315.324392]   domain 1: span 03
>[  315.324394]    groups: 03
>[  315.324396] CPU1 attaching sched-domain:
>[  315.324397]  domain 0: span 03
>[  315.324399]   groups: 02 01
>[  315.324401]   domain 1: span 03
>[  315.324402]    groups: 03
>[  492.548852] CPU0 attaching NULL sched-domain.
>[  492.548859] CPU1 attaching NULL sched-domain.
>[  492.562785] CPU0 attaching sched-domain:
>[  492.562792]  domain 0: span 03
>[  492.562793]   groups: 01 02
>[  492.562796]   domain 1: span 03
>[  492.562798]    groups: 03
>[  492.562800] CPU1 attaching sched-domain:
>[  492.562801]  domain 0: span 03
>[  492.562803]   groups: 02 01
>[  492.562805]   domain 1: span 03
>[  492.562806]    groups: 03
>[ 2283.720705] CPU0 attaching NULL sched-domain.
>[ 2283.720718] CPU1 attaching NULL sched-domain.
>[ 2283.739073] CPU0 attaching sched-domain:
>[ 2283.739080]  domain 0: span 03
>[ 2283.739081]   groups: 01 02
>[ 2283.739084]   domain 1: span 03
>[ 2283.739086]    groups: 03
>[ 2283.739088] CPU1 attaching sched-domain:
>[ 2283.739089]  domain 0: span 03
>[ 2283.739091]   groups: 02 01
>[ 2283.739093]   domain 1: span 03
>[ 2283.739094]    groups: 03

Actions: View

Attachments on bug 16777: 17754 | 17755 | 17756 | 17757 | 17822 | 18030 | 20713 | 20714 | 20760 | 20958 | 21906

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.