Attachment 16368 Details for Bug 11305 – Wait for vblank after disabling cursor

[patch] Wait for vblank after disabling cursor

i830-real-vblank-wait-2.patch (text/plain), 15.13 KB, created by Jesse Barnes on 2008-05-05 16:36:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jesse Barnes

Created: 2008-05-05 16:36:59 UTC

Size: 15.13 KB

patch

obsolete

>diff --git a/src/common.h b/src/common.h
>index 9a3e0ac..d93c37a 100644
>--- a/src/common.h
>+++ b/src/common.h
>@@ -169,6 +169,11 @@ static inline void memcpy_volatile(volatile void *dst, const void *src,
>    }									\
> } while (0)
> 
>+enum pipe {
>+    PIPE_A = 0,
>+    PIPE_B,
>+};
>+
> /* To remove all debugging, make sure I810_DEBUG is defined as a
>  * preprocessor symbol, and equal to zero.
>  */
>@@ -180,6 +185,21 @@ static inline void memcpy_volatile(volatile void *dst, const void *src,
> extern int I810_DEBUG;
> #endif
> 
>+#include <execinfo.h>
>+
>+static __inline__ void intel_backtrace(void)
>+{
>+	void *array[32]; /* deeper nesting than this means something's wrong */
>+	size_t size, i;
>+	char **strings;
>+	ErrorF("\nBacktrace:\n");
>+	size = backtrace(array, 32);
>+	strings = backtrace_symbols(array, size);
>+	for (i = 0; i < size; i++)
>+		ErrorF("%d: %s\n", i, strings[i]);
>+	free(strings);
>+}
>+
> #define DEBUG_VERBOSE_ACCEL  0x1
> #define DEBUG_VERBOSE_SYNC   0x2
> #define DEBUG_VERBOSE_VGA    0x4
>diff --git a/src/i810_reg.h b/src/i810_reg.h
>index 834b948..97f2c08 100644
>--- a/src/i810_reg.h
>+++ b/src/i810_reg.h
>@@ -2022,6 +2022,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
> /** @} */
> 
> #define PIPEA_DSL		0x70000
>+#define DSL_LINEMASK		0xfff
> 
> #define PIPEACONF 0x70008
> #define PIPEACONF_ENABLE	(1<<31)
>diff --git a/src/i830_cursor.c b/src/i830_cursor.c
>index 43a65cb..b304ffd 100644
>--- a/src/i830_cursor.c
>+++ b/src/i830_cursor.c
>@@ -233,6 +233,7 @@ i830_crtc_show_cursor (xf86CrtcPtr crtc)
>     /* Need to set mode, then address. */
>     OUTREG(cursor_control, temp);
>     I830SetPipeCursorBase (crtc);
>+    i830WaitForVblank(crtc);
> }
> 
> void
>diff --git a/src/i830_display.c b/src/i830_display.c
>index 1122721..6353f14 100644
>--- a/src/i830_display.c
>+++ b/src/i830_display.c
>@@ -369,11 +369,99 @@ i830FindBestPLL(xf86CrtcPtr crtc, int target, int refclk, intel_clock_t *best_cl
>     return (err != target);
> }
> 
>+/*
>+ * If we're waiting for pipe disable, we need to use this function
>+ * instead of the one that uses VBLANK_INT_STATUS.
>+ */
>+void
>+i830WaitForVblankScanline(xf86CrtcPtr crtc)
>+{
>+    ScrnInfoPtr pScrn = crtc->scrn;
>+    I830Ptr pI830 = I830PTR(pScrn);
>+    I830CrtcPrivatePtr intel_crtc = crtc->driver_private;
>+    int pipe = intel_crtc->pipe;
>+    int pipedsl = (pipe == 0 ? PIPEA_DSL : PIPEB_DSL);
>+    uint32_t last_line;
>+    int start_time, elapsed_time;
>+
>+    /* Wait for display line to match or 30ms timeout to elapse */
>+    start_time = GetTimeInMillis();
>+    do {
>+	elapsed_time = GetTimeInMillis() - start_time;
>+	last_line = INREG(pipedsl) & DSL_LINEMASK;
>+	usleep(1000);
>+    } while (((INREG(pipedsl) & DSL_LINEMASK) != last_line) &&
>+	     elapsed_time < 30);
>+
>+    if (elapsed_time >= 30) {
>+	xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
>+		   "Timeout waiting on vblank (pipe %d), hope it was enough.\n",
>+		   pipe);
>+	intel_backtrace();
>+    }
>+}
>+
> void
>-i830WaitForVblank(ScrnInfoPtr pScreen)
>+i830WaitForVblankScanlinePipe(ScrnInfoPtr pScrn, enum pipe pipe)
> {
>-    /* Wait for 20ms, i.e. one cycle at 50hz. */
>-    usleep(30000);
>+    xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn);
>+    int i;
>+
>+    for (i = 0; i < xf86_config->num_crtc; i++) {
>+	xf86CrtcPtr crtc = xf86_config->crtc[i];
>+	I830CrtcPrivatePtr intel_crtc = crtc->driver_private;
>+
>+	if (intel_crtc->pipe == pipe)
>+	    return i830WaitForVblankScanline(crtc);
>+    }
>+
>+    xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
>+	       "Tried to wait on vblank for non-existent pipe %d.\n", pipe);
>+}
>+
>+void
>+i830WaitForVblank(xf86CrtcPtr crtc)
>+{
>+    ScrnInfoPtr pScrn = crtc->scrn;
>+    I830Ptr pI830 = I830PTR(pScrn);
>+    I830CrtcPrivatePtr intel_crtc = crtc->driver_private;
>+    int pipe = intel_crtc->pipe;
>+    int pipestat = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
>+    int start_time, elapsed_time;
>+
>+    /* Clear any outstaning vblank event */
>+    OUTREG(pipestat, INREG(pipestat) & ~VBLANK_INT_STATUS);
>+    start_time = GetTimeInMillis();
>+
>+    /* Wait for vblank to have occurred or 30ms timeout to elapse */
>+    do {
>+	elapsed_time = GetTimeInMillis() - start_time;
>+    } while (!(INREG(pipestat) & VBLANK_INT_STATUS) && elapsed_time < 30);
>+
>+    if (elapsed_time >= 30) {
>+	xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
>+		   "Timeout waiting on vblank (pipe %d), hope it was enough.\n",
>+		   pipe);
>+	intel_backtrace();
>+    }
>+}
>+
>+void
>+i830WaitForVblankPipe(ScrnInfoPtr pScrn, enum pipe pipe)
>+{
>+    xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn);
>+    int i;
>+
>+    for (i = 0; i < xf86_config->num_crtc; i++) {
>+	xf86CrtcPtr crtc = xf86_config->crtc[i];
>+	I830CrtcPrivatePtr intel_crtc = crtc->driver_private;
>+
>+	if (intel_crtc->pipe == pipe)
>+	    return i830WaitForVblank(crtc);
>+    }
>+
>+    xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
>+	       "Tried to wait on vblank for non-existent pipe %d.\n", pipe);
> }
> 
> void
>@@ -572,7 +660,7 @@ i830_enable_fb_compression_8xx(xf86CrtcPtr crtc)
>     /* Wait for compressing bit to clear */
>     while (INREG(FBC_STATUS) & FBC_STAT_COMPRESSING)
> 	; /* nothing */
>-    i830WaitForVblank(pScrn);
>+    i830WaitForVblank(crtc);
>     OUTREG(FBC_CFB_BASE, pI830->compressed_front_buffer->bus_addr);
>     OUTREG(FBC_LL_BASE, pI830->compressed_ll_buffer->bus_addr + 6);
>     OUTREG(FBC_CONTROL2, FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM |
>@@ -625,7 +713,7 @@ i830_disable_fb_compression2(xf86CrtcPtr crtc)
>     dpfc_ctl = INREG(DPFC_CONTROL);
>     dpfc_ctl &= ~DPFC_CTL_EN;
>     OUTREG(DPFC_CONTROL, dpfc_ctl);
>-    i830WaitForVblank(pScrn);
>+    i830WaitForVblank(crtc);
> }
> 
> static void
>@@ -823,7 +911,7 @@ i830_crtc_dpms(xf86CrtcPtr crtc, int mode)
> 
> 	if (!IS_I9XX(pI830)) {
> 	    /* Wait for vblank for the disable to take effect */
>-	    i830WaitForVblank(pScrn);
>+	    i830WaitForVblank(crtc);
> 	}
> 
> 	/* Next, disable display pipes */
>@@ -834,7 +922,7 @@ i830_crtc_dpms(xf86CrtcPtr crtc, int mode)
> 	}
> 
> 	/* Wait for vblank for the disable to take effect. */
>-	i830WaitForVblank(pScrn);
>+	i830WaitForVblankScanline(crtc);
> 
> 	temp = INREG(dpll_reg);
> 	if ((temp & DPLL_VCO_ENABLE) != 0) {
>@@ -1366,7 +1454,7 @@ i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode,
>     OUTREG(pipesrc_reg, ((mode->HDisplay - 1) << 16) | (mode->VDisplay - 1));
>     OUTREG(pipeconf_reg, pipeconf);
>     POSTING_READ(pipeconf_reg);
>-    i830WaitForVblank(pScrn);
>+    i830WaitForVblank(crtc);
> 
>     OUTREG(dspcntr_reg, dspcntr);
>     /* Flush the plane changes */
>@@ -1375,7 +1463,7 @@ i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode,
>    I830DRISetVBlankInterrupt (pScrn, TRUE);
> #endif
>     
>-    i830WaitForVblank(pScrn);
>+    i830WaitForVblank(crtc);
> }
> 
> 
>@@ -1651,7 +1739,7 @@ i830GetLoadDetectPipe(xf86OutputPtr output, DisplayModePtr mode, int *dpms_mode)
> 	output->funcs->commit (output);
>     }
>     /* let the output get through one full cycle before testing */
>-    i830WaitForVblank (pScrn);
>+    i830WaitForVblank(crtc);
> 
>     return crtc;
> }
>diff --git a/src/i830_display.h b/src/i830_display.h
>index 1eeb7f1..69a02aa 100644
>--- a/src/i830_display.h
>+++ b/src/i830_display.h
>@@ -29,7 +29,10 @@
> 
> /* i830_display.c */
> void i830PipeSetBase(xf86CrtcPtr crtc, int x, int y);
>-void i830WaitForVblank(ScrnInfoPtr pScrn);
>+void i830WaitForVblank(xf86CrtcPtr crtc);
>+void i830WaitForVblankPipe(ScrnInfoPtr pScrn, enum pipe pipe);
>+void i830WaitForVblankScanline(xf86CrtcPtr crtc);
>+void i830WaitForVblankScanlinePipe(ScrnInfoPtr pScrn, enum pipe pipe);
> void i830DescribeOutputConfiguration(ScrnInfoPtr pScrn);
> 
> xf86CrtcPtr i830GetLoadDetectPipe(xf86OutputPtr output, DisplayModePtr mode, int *dpms_mode);
>diff --git a/src/i830_driver.c b/src/i830_driver.c
>index b776ff6..45288d4 100644
>--- a/src/i830_driver.c
>+++ b/src/i830_driver.c
>@@ -1915,11 +1915,6 @@ SetHWOperatingState(ScrnInfoPtr pScrn)
>       I830InitHWCursor(pScrn);
> }
> 
>-enum pipe {
>-    PIPE_A = 0,
>-    PIPE_B,
>-};
>-
> static Bool
> i830_pipe_enabled(I830Ptr pI830, enum pipe pipe)
> {
>@@ -2087,14 +2082,12 @@ RestoreHWState(ScrnInfoPtr pScrn)
>       xf86OutputPtr   output = xf86_config->output[i];
>       output->funcs->dpms(output, DPMSModeOff);
>    }
>-   i830WaitForVblank(pScrn);
>    
>    /* Disable pipes */
>    for (i = 0; i < xf86_config->num_crtc; i++) {
>       xf86CrtcPtr crtc = xf86_config->crtc[i];
>       crtc->funcs->dpms(crtc, DPMSModeOff);
>    }
>-   i830WaitForVblank(pScrn);
> 
>    if (IS_MOBILE(pI830) && !IS_I830(pI830))
>       OUTREG(LVDS, pI830->saveLVDS);
>@@ -2134,7 +2127,17 @@ RestoreHWState(ScrnInfoPtr pScrn)
>       OUTREG(DPLL_A, pI830->saveDPLL_A);
>    i830_dpll_settle();
> 
>-   /* Restore mode config */
>+   /*
>+    * Restore mode config
>+    *   Ordering rules:
>+    *     - LVDS must be enabled before DPLLs are programmed
>+    *     - pipe timing regs must be valid before pipes are enabled
>+    *     - pipes must be enabled before corresponding planes
>+    *     - planes are enabled/disabled at next vblank after "trigger" register
>+    *       is written (either DSP*CNTR enable bit if 0->1 or DSP*BASE reg)
>+    *     - if VGA plane is active, corresponding bit in DSP*CNTR enable
>+    *       bit should be off
>+    */
>    OUTREG(HTOTAL_A, pI830->saveHTOTAL_A);
>    OUTREG(HBLANK_A, pI830->saveHBLANK_A);
>    OUTREG(HSYNC_A, pI830->saveHSYNC_A);
>@@ -2142,21 +2145,23 @@ RestoreHWState(ScrnInfoPtr pScrn)
>    OUTREG(VBLANK_A, pI830->saveVBLANK_A);
>    OUTREG(VSYNC_A, pI830->saveVSYNC_A);
>    OUTREG(BCLRPAT_A, pI830->saveBCLRPAT_A);
>-   
>+   OUTREG(PIPEASRC, pI830->savePIPEASRC);   
>+   OUTREG(PIPEACONF, pI830->savePIPEACONF);
>+   if (pI830->savePIPEACONF & PIPEACONF_ENABLE)
>+	   i830WaitForVblankPipe(pScrn, PIPE_A); /* wait for pipe update */
>+   else
>+	   i830WaitForVblankScanlinePipe(pScrn, PIPE_A);
>+
>    OUTREG(DSPASTRIDE, pI830->saveDSPASTRIDE);
>    OUTREG(DSPASIZE, pI830->saveDSPASIZE);
>    OUTREG(DSPAPOS, pI830->saveDSPAPOS);
>-   OUTREG(PIPEASRC, pI830->savePIPEASRC);
>-   OUTREG(DSPABASE, pI830->saveDSPABASE);
>    if (IS_I965G(pI830))
>    {
>       OUTREG(DSPASURF, pI830->saveDSPASURF);
>       OUTREG(DSPATILEOFF, pI830->saveDSPATILEOFF);
>    }
> 
>-   OUTREG(PIPEACONF, pI830->savePIPEACONF);
>-   i830WaitForVblank(pScrn);
>-
>+   OUTREG(DSPABASE, pI830->saveDSPABASE);
>    /*
>     * Program Pipe A's plane
>     * The corresponding display plane may be disabled, and should only be
>@@ -2167,14 +2172,14 @@ RestoreHWState(ScrnInfoPtr pScrn)
>        DISPPLANE_SEL_PIPE_A) {
>        OUTREG(DSPACNTR, pI830->saveDSPACNTR);
>        OUTREG(DSPABASE, INREG(DSPABASE));
>-       i830WaitForVblank(pScrn);
>    }
>    if ((pI830->saveDSPBCNTR & DISPPLANE_SEL_PIPE_MASK) ==
>        DISPPLANE_SEL_PIPE_A) {
>        OUTREG(DSPBCNTR, pI830->saveDSPBCNTR);
>        OUTREG(DSPBBASE, INREG(DSPBBASE));
>-       i830WaitForVblank(pScrn);
>    }
>+   if (pI830->savePIPEACONF & PIPEACONF_ENABLE)
>+	   i830WaitForVblankPipe(pScrn, PIPE_A); /* wait for plane update */
> 
>    /* See note about pipe programming above */
>    if(xf86_config->num_crtc == 2) 
>@@ -2203,20 +2208,24 @@ RestoreHWState(ScrnInfoPtr pScrn)
>       OUTREG(VBLANK_B, pI830->saveVBLANK_B);
>       OUTREG(VSYNC_B, pI830->saveVSYNC_B);
>       OUTREG(BCLRPAT_B, pI830->saveBCLRPAT_B);
>+      OUTREG(PIPEBSRC, pI830->savePIPEBSRC);
>+      OUTREG(PIPEBCONF, pI830->savePIPEBCONF);
>+      if (pI830->savePIPEBCONF & PIPEBCONF_ENABLE)
>+	      i830WaitForVblankPipe(pScrn, PIPE_B); /* wait for pipe update */
>+      else
>+	      i830WaitForVblankScanlinePipe(pScrn, PIPE_B);
>+
>       OUTREG(DSPBSTRIDE, pI830->saveDSPBSTRIDE);
>       OUTREG(DSPBSIZE, pI830->saveDSPBSIZE);
>       OUTREG(DSPBPOS, pI830->saveDSPBPOS);
>-      OUTREG(PIPEBSRC, pI830->savePIPEBSRC);
>-      OUTREG(DSPBBASE, pI830->saveDSPBBASE);
>       if (IS_I965G(pI830))
>       {
> 	 OUTREG(DSPBSURF, pI830->saveDSPBSURF);
> 	 OUTREG(DSPBTILEOFF, pI830->saveDSPBTILEOFF);
>       }
> 
>-      OUTREG(PIPEBCONF, pI830->savePIPEBCONF);
>-      i830WaitForVblank(pScrn);
> 
>+      OUTREG(DSPBBASE, pI830->saveDSPBBASE);
>       /*
>        * Program Pipe B's plane
>        * Note that pipe B may be disabled, and in that case, the plane
>@@ -2226,14 +2235,14 @@ RestoreHWState(ScrnInfoPtr pScrn)
> 	  DISPPLANE_SEL_PIPE_B) {
> 	  OUTREG(DSPACNTR, pI830->saveDSPACNTR);
> 	  OUTREG(DSPABASE, INREG(DSPABASE));
>-	  i830WaitForVblank(pScrn);
>       }
>       if ((pI830->saveDSPBCNTR & DISPPLANE_SEL_PIPE_MASK) ==
> 	  DISPPLANE_SEL_PIPE_B) {
> 	  OUTREG(DSPBCNTR, pI830->saveDSPBCNTR);
> 	  OUTREG(DSPBBASE, INREG(DSPBBASE));
>-	  i830WaitForVblank(pScrn);
>       }
>+      if (pI830->savePIPEBCONF & PIPEBCONF_ENABLE)
>+	      i830WaitForVblankPipe(pScrn, PIPE_B); /* wait for plane update */
>    }
> 
>    OUTREG(VGACNTRL, pI830->saveVGACNTRL);
>diff --git a/src/i830_sdvo.c b/src/i830_sdvo.c
>index 2379127..4650848 100644
>--- a/src/i830_sdvo.c
>+++ b/src/i830_sdvo.c
>@@ -906,6 +906,7 @@ i830_sdvo_dpms(xf86OutputPtr output, int mode)
> {
>     ScrnInfoPtr		    pScrn = output->scrn;
>     I830OutputPrivatePtr    intel_output = output->driver_private;
>+    xf86CrtcPtr		    crtc = output->crtc;
>     struct i830_sdvo_priv   *dev_priv = intel_output->dev_priv;
>     I830Ptr pI830 = I830PTR(pScrn);
>     uint32_t  temp;
>@@ -930,7 +931,7 @@ i830_sdvo_dpms(xf86OutputPtr output, int mode)
> 	if ((temp & SDVO_ENABLE) == 0)
> 	    i830_sdvo_write_sdvox(output, temp | SDVO_ENABLE);
> 	for (i = 0; i < 2; i++)
>-	    i830WaitForVblank(pScrn);
>+	    i830WaitForVblank(crtc);
> 
> 	status = i830_sdvo_get_trained_inputs(output, &input1, &input2);
> 
>@@ -989,6 +990,7 @@ static void
> i830_sdvo_restore(xf86OutputPtr output)
> {
>     ScrnInfoPtr		    pScrn = output->scrn;
>+    xf86CrtcPtr		    crtc = output->crtc;
>     I830OutputPrivatePtr    intel_output = output->driver_private;
>     struct i830_sdvo_priv   *dev_priv = intel_output->dev_priv;
>     int			    o;
>@@ -1027,7 +1029,7 @@ i830_sdvo_restore(xf86OutputPtr output)
>     if (dev_priv->save_SDVOX & SDVO_ENABLE)
>     {
> 	for (i = 0; i < 2; i++)
>-	    i830WaitForVblank(pScrn);
>+	    i830WaitForVblank(crtc);
> 	status = i830_sdvo_get_trained_inputs(output, &input1, &input2);
> 	if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
> 	    xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
>diff --git a/src/i830_tv.c b/src/i830_tv.c
>index 6adb9f2..b2ccdd4 100644
>--- a/src/i830_tv.c
>+++ b/src/i830_tv.c
>@@ -890,12 +890,12 @@ i830_tv_restore(xf86OutputPtr output)
> 
> 	if (!IS_I9XX(pI830)) {
> 	    /* Wait for vblank for the disable to take effect */
>-	    i830WaitForVblank(pScrn);
>+	    i830WaitForVblank(crtc);
> 	}
> 
> 	OUTREG(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE);
> 	/* Wait for vblank for the disable to take effect. */
>-	i830WaitForVblank(pScrn);
>+	i830WaitForVblank(crtc);
> 
> 	/* Filter ctl must be set before TV_WIN_SIZE */
> 	OUTREG(TV_FILTER_CTL_1, dev_priv->save_TV_FILTER_CTL_1);
>@@ -1196,12 +1196,12 @@ i830_tv_mode_set(xf86OutputPtr output, DisplayModePtr mode,
> 
> 	if (!IS_I9XX(pI830)) {
> 	    /* Wait for vblank for the disable to take effect */
>-	    i830WaitForVblank(pScrn);
>+	    i830WaitForVblank(crtc);
> 	}
> 
> 	OUTREG(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE);
> 	/* Wait for vblank for the disable to take effect. */
>-	i830WaitForVblank(pScrn);
>+	i830WaitForVblank(crtc);
> 
> 	/* Filter ctl must be set before TV_WIN_SIZE */
> 	OUTREG(TV_FILTER_CTL_1, TV_AUTO_SCALE); 
>@@ -1299,7 +1299,7 @@ i830_tv_detect_type (xf86CrtcPtr    crtc,
> 		DAC_C_0_7_V);
> 	OUTREG(TV_CTL, tv_ctl);
> 	OUTREG(TV_DAC, tv_dac);
>-	i830WaitForVblank(pScrn);
>+	i830WaitForVblank(crtc);
> 	tv_dac = INREG(TV_DAC);
> 	OUTREG(TV_DAC, save_tv_dac);
> 	OUTREG(TV_CTL, save_tv_ctl);

Actions: View | Splinter Review

Attachments on bug 11305: 10367 | 11258 | 11259 | 14243 | 15315 | 15316 | 15317 | 15318 | 15319 | 15320 | 15321 | 15323 | 16368 | 16371 | 16412

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.