Attachment 144369 Details for Bug 110782 – dmesg drm.debug=0xe log on linux-lts 4.19.46-1

dmesg drm.debug=0xe log on linux-lts 4.19.46-1

dmesg_good_lts_4.19.46-1.txt (text/plain), 123.43 KB, created by Blubberbub on 2019-05-29 06:59:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Blubberbub

Created: 2019-05-29 06:59:24 UTC

Size: 123.43 KB

patch

obsolete

>[    3.199877] [drm:intel_alloc_initial_plane_obj.isra.95 [i915]] initial plane fb obj 00000000709a5b75
>[    3.199908] [drm:intel_wopcm_init [i915]] Calculated GuC WOPCM Region: [16KiB, 1008KiB)
>[    3.200318] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7ea000, 100000000]
>[    3.200338] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 10
>[    3.200371] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    3.201353] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    3.201375] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    3.201395] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    3.201413] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    3.201430] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.201446] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400)
>[    3.201461] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[    3.201476] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
>[    3.201491] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    3.201803] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    3.201827] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    3.202209] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    3.202260] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.212982] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.213006] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.213031] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.215653] iwlwifi 0000:3d:00.0: base HW address: [MAC Redacted]
>[    3.221410] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.221431] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.221453] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.229860] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.229880] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.229902] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.239749] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.239777] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.239807] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.251223] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.251244] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.251267] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.259654] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.259674] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.259695] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.268072] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.268091] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.269766] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.278144] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.278164] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.278186] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.286560] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.286580] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.286600] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.294999] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.295023] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.295048] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.303428] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.303448] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.303469] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.315176] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.315200] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.315224] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.326591] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.326617] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.326646] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.327681] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    3.327869] thermal thermal_zone6: failed to read out thermal zone (-61)
>[    3.329063] iwlwifi 0000:3d:00.0 wlp61s0: renamed from wlan0
>[    3.335036] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.335060] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.335084] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.343462] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.343482] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.343504] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.346406] usb 1-7: new full-speed USB device number 4 using xhci_hcd
>[    3.351881] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.351901] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.351922] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.360304] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.360324] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.360350] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.361894] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
>[    3.368732] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.368750] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.368771] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.377145] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.377164] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.377185] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.384727] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x7f3001)
>[    3.385556] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.385575] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.385596] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.394002] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.394032] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.394063] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.394961] psmouse serio1: elantech: Synaptics capabilities query result 0x90, 0x18, 0x0f.
>[    3.402473] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.402504] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.402535] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.404423] psmouse serio1: elantech: Elan sample query result 00, 20, c9
>[    3.410943] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.410974] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.411006] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.413990] psmouse serio1: elantech: Trying to set up SMBus access
>[    3.417721] elan_i2c 0-0015: 0-0015 supply vcc not found, using dummy regulator
>[    3.417731] elan_i2c 0-0015: Linked as a consumer to regulator.0
>[    3.419404] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.419435] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.419468] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.427919] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.427950] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.428020] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.429940] elan_i2c 0-0015: Elan Touchpad: Module ID: 0x0020, Firmware: 0x0001, Sample: 0x0000, IAP: 0x0000
>[    3.430024] input: Elan Touchpad as /devices/pci0000:00/0000:00:1f.4/i2c-0/0-0015/input/input8
>[    3.430078] input: Elan TrackPoint as /devices/pci0000:00/0000:00:1f.4/i2c-0/0-0015/input/input9
>[    3.434015] mousedev: PS/2 mouse device common for all mice
>[    3.436568] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.436608] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.436645] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.445038] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.445068] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.445100] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.446408] usb 3-1.4: new high-speed USB device number 3 using xhci_hcd
>[    3.453490] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.453519] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.453552] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.455263] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) [MAC Redacted]
>[    3.455264] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
>[    3.455336] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
>[    3.456520] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
>[    3.465208] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.465232] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.465269] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.474725] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.474749] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.474774] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.483155] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.483175] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.483197] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.491579] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff
>[    3.491598] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.491609] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110
>[    3.491673] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    3.491799] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.491963] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.491984] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.492144] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.492166] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
>[    3.492244] [drm:intel_opregion_register [i915]] 5 outputs detected
>[    3.494037] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.494194] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
>[    3.494366] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    3.494373] i915 device info: pciid=0x5917 rev=0x07 platform=KABYLAKE gen=9
>[    3.494379] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    3.494380] i915 device info: is_mobile: no
>[    3.494380] i915 device info: is_lp: no
>[    3.494384] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
>[    3.494384] i915 device info: is_alpha_support: no
>[    3.494413] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[    3.494413] i915 device info: has_64bit_reloc: yes
>[    3.494414] i915 device info: has_aliasing_ppgtt: yes
>[    3.494415] i915 device info: has_csr: yes
>[    3.494441] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    3.494441] i915 device info: has_ddi: yes
>[    3.494463] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.494464] i915 device info: has_dp_mst: yes
>[    3.494483] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.494484] i915 device info: has_reset_engine: yes
>[    3.494485] i915 device info: has_fbc: yes
>[    3.494485] i915 device info: has_fpga_dbg: yes
>[    3.494486] i915 device info: has_full_ppgtt: yes
>[    3.494486] i915 device info: has_full_48bit_ppgtt: yes
>[    3.494486] i915 device info: has_gmch_display: no
>[    3.494487] i915 device info: has_guc: yes
>[    3.494487] i915 device info: has_guc_ct: no
>[    3.494488] i915 device info: has_hotplug: yes
>[    3.494488] i915 device info: has_l3_dpf: no
>[    3.494489] i915 device info: has_llc: yes
>[    3.494489] i915 device info: has_logical_ring_contexts: yes
>[    3.494490] i915 device info: has_logical_ring_elsq: no
>[    3.494492] i915 device info: has_logical_ring_preemption: yes
>[    3.494492] i915 device info: has_overlay: no
>[    3.494493] i915 device info: has_pooled_eu: no
>[    3.494493] i915 device info: has_psr: yes
>[    3.494494] i915 device info: has_rc6: yes
>[    3.494494] i915 device info: has_rc6p: no
>[    3.494494] i915 device info: has_resource_streamer: yes
>[    3.494495] i915 device info: has_runtime_pm: yes
>[    3.494495] i915 device info: has_snoop: no
>[    3.494496] i915 device info: unfenced_needs_alignment: no
>[    3.494496] i915 device info: cursor_needs_physical: no
>[    3.494497] i915 device info: hws_needs_physical: no
>[    3.494497] i915 device info: overlay_needs_physical: no
>[    3.494499] i915 device info: supports_tv: no
>[    3.494500] i915 device info: has_ipc: yes
>[    3.494501] i915 device info: slice total: 1, mask=0001
>[    3.494501] i915 device info: subslice total: 3
>[    3.494502] i915 device info: slice0: 3 subslices, mask=0007
>[    3.494503] i915 device info: slice1: 0 subslices, mask=0000
>[    3.494504] i915 device info: slice2: 0 subslices, mask=0000
>[    3.494505] i915 device info: EU total: 24
>[    3.494506] i915 device info: EU per subslice: 8
>[    3.494506] i915 device info: has slice power gating: no
>[    3.494507] i915 device info: has subslice power gating: no
>[    3.494507] i915 device info: has EU power gating: yes
>[    3.494508] i915 device info: CS timestamp frequency: 12000 kHz
>[    3.494869] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    3.495457] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] status updated from unknown to connected
>[    3.495469] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.495478] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    3.495485] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.495499] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
>[    3.495507] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    3.495510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1]
>[    3.495533] [drm:intel_dp_detect [i915]] [CONNECTOR:78:DP-1]
>[    3.495554] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.495585] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.495593] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] status updated from unknown to disconnected
>[    3.495596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] disconnected
>[    3.495599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1]
>[    3.495622] [drm:intel_hdmi_detect [i915]] [CONNECTOR:84:HDMI-A-1]
>[    3.537563] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
>[    3.537565] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.546469] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.549153] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.549183] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.549205] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.551859] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.551878] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.604341] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.607038] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.607043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] status updated from unknown to disconnected
>[    3.607048] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] disconnected
>[    3.607053] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2]
>[    3.607089] [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2]
>[    3.607113] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.607561] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 01 01 83 02 00 04 00 00 00 04
>[    3.608295] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    3.608323] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    3.608345] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    3.608737] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 90-cc-24 dev-ID SYNAS" HW-rev 1.0 SW-rev 5.2 quirks 0x0000
>[    3.609052] [drm:intel_dp_detect [i915]] Sink is MST capable
>[    3.610618] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.610633] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] status updated from unknown to disconnected
>[    3.610637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] disconnected
>[    3.610644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2]
>[    3.610679] [drm:intel_hdmi_detect [i915]] [CONNECTOR:94:HDMI-A-2]
>[    3.610776] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.610894] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.610924] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.611082] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.611138] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.611167] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.611194] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.611220] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    3.613890] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.613928] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    3.614172] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.614202] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.614425] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.614448] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.614454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] status updated from unknown to disconnected
>[    3.614458] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] disconnected
>[    3.614464] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
>[    3.614468] [drm:drm_setup_crtcs [drm_kms_helper]] connector 78 enabled? no
>[    3.614472] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no
>[    3.614475] [drm:drm_setup_crtcs [drm_kms_helper]] connector 89 enabled? no
>[    3.614479] [drm:drm_setup_crtcs [drm_kms_helper]] connector 94 enabled? no
>[    3.614506] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    3.614510] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
>[    3.614513] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
>[    3.614516] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    3.614519] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    3.614523] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
>[    3.614546] [drm:intelfb_create [i915]] re-using BIOS fb
>[    3.614575] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00000000
>[    3.614615] fbcon: inteldrmfb (fb0) is primary device
>[    3.614685] [drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
>[    3.614706] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 18
>[    3.614729] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    3.614751] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 18 pixel clock 152840KHz
>[    3.614777] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 18
>[    3.614805] [drm:intel_dp_compute_config [i915]] DP link rate required 343890 available 540000
>[    3.614837] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    3.614867] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
>[    3.614897] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    3.614926] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[    3.614955] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5342145, gmch_n: 8388608, link_m: 296785, link_n: 524288, tu: 64
>[    3.614983] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.615012] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.615029] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    3.615060] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.615072] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    3.615101] [drm:intel_dump_pipe_config [i915]] crtc timings: 152840 1920 2000 2060 2250 1080 1086 1094 1132, type: 0x48 flags: 0xa
>[    3.615128] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 152840
>[    3.615156] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.615183] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.615210] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.615237] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.615281] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.615306] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] FB:97, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    3.615330] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[    3.615353] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
>[    3.615373] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
>[    3.615405] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[    3.615434] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
>[    3.615467] [drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
>[    3.615495] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[    3.615547] [drm:intel_edp_backlight_off [i915]] 
>[    3.616073] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    3.616100] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    3.616139] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    3.616192] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.616648] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    3.621168] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    3.621198] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    3.621229] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.625850] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    3.625877] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    3.625917] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    3.625947] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.626927] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    3.631214] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    3.631245] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    3.631423] [drm:drm_dp_send_link_address [drm_kms_helper]] link address reply: 4
>[    3.631429] [drm:drm_dp_send_link_address [drm_kms_helper]] port 0: input 1, pdt: 1, pn: 0, dpcd_rev: 00, mcs: 1, ddps: 1, ldps 0, sdp 0/0
>[    3.631435] [drm:drm_dp_send_link_address [drm_kms_helper]] port 1: input 0, pdt: 0, pn: 1, dpcd_rev: 00, mcs: 0, ddps: 0, ldps 0, sdp 0/0
>[    3.631440] [drm:drm_dp_send_link_address [drm_kms_helper]] port 2: input 0, pdt: 0, pn: 2, dpcd_rev: 00, mcs: 0, ddps: 0, ldps 0, sdp 0/0
>[    3.631444] [drm:drm_dp_send_link_address [drm_kms_helper]] port 3: input 0, pdt: 3, pn: 3, dpcd_rev: 11, mcs: 0, ddps: 1, ldps 0, sdp 1/1
>[    3.632329] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    3.634009] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    3.634038] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.634106] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    3.634126] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.634574] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    3.634593] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.686461] usb 1-8: new high-speed USB device number 5 using xhci_hcd
>[    3.808519] usb 3-1.4: New USB device found, idVendor=17ef, idProduct=3073, bcdDevice= 7.20
>[    3.808520] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.808521] usb 3-1.4: Product: USB2.0 Hub             
>[    3.808522] usb 3-1.4: Manufacturer: VIA Labs, Inc.         
>[    3.809457] hub 3-1.4:1.0: USB hub found
>[    3.809645] hub 3-1.4:1.0: 4 ports detected
>[    3.886474] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    3.886532] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[    3.886593] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    3.889085] usb 1-8: New USB device found, idVendor=5986, idProduct=2113, bcdDevice=54.22
>[    3.889087] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.889088] usb 1-8: Product: Integrated Camera
>[    3.889090] usb 1-8: Manufacturer: SunplusIT Inc
>[    3.902511] [drm:intel_edp_panel_off.part.31 [i915]] Turn eDP port A panel power off
>[    3.902614] [drm:intel_edp_panel_off.part.31 [i915]] Wait for panel power off time
>[    3.902739] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control abcd0000
>[    3.954921] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    3.955027] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.955120] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    3.955228] [drm:wait_panel_status [i915]] Wait complete
>[    3.955320] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[    3.955450] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 41
>[    3.955567] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    3.955671] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1
>[    3.955792] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
>[    3.955884] [drm:intel_atomic_commit_tail [i915]] [ENCODER:77:DDI B]
>[    3.955969] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DP-MST A]
>[    3.956776] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DP-MST B]
>[    3.956878] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP-MST C]
>[    3.956954] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DDI C]
>[    3.957029] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DP-MST A]
>[    3.957100] [drm:intel_atomic_commit_tail [i915]] [ENCODER:91:DP-MST B]
>[    3.957178] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST C]
>[    3.957270] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 0
>[    3.957360] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 1
>[    3.957447] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 2
>[    3.957530] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 3
>[    3.957640] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
>[    3.957739] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[    3.957860] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    3.957969] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    3.967093] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
>[    4.029558] scsi 0:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 6
>[    4.052361] sd 0:0:0:0: [sda] Attached SCSI removable disk
>[    4.056535] usb 1-9: new full-speed USB device number 6 using xhci_hcd
>[    4.079179] usb 4-1.4: New USB device found, idVendor=17ef, idProduct=3072, bcdDevice= 7.23
>[    4.079184] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.079186] usb 4-1.4: Product: USB3.0 Hub             
>[    4.079189] usb 4-1.4: Manufacturer: VIA Labs, Inc.         
>[    4.092505] hub 4-1.4:1.0: USB hub found
>[    4.093192] hub 4-1.4:1.0: 1 port detected
>[    4.238684] usb 1-9: New USB device found, idVendor=06cb, idProduct=009a, bcdDevice= 1.64
>[    4.238688] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    4.238690] usb 1-9: SerialNumber: e4c7b486c6d6
>[    4.272221] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.281170] media: Linux media interface: v0.10
>[    4.294942] hidraw: raw HID events driver (C) Jiri Kosina
>[    4.313284] videodev: Linux video capture interface: v2.00
>[    4.314958] usbcore: registered new interface driver usbhid
>[    4.314958] usbhid: USB HID core driver
>[    4.315627] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    4.315628] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.315629] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    4.315630] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    4.315630] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    4.315631] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
>[    4.315632] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    4.318659] hid-generic 0003:17EF:3076.0001: hiddev0,hidraw0: USB HID v1.11 Device [Cypress Semiconductor USB Billboard] on usb-0000:00:14.0-4/input1
>[    4.343025] Bluetooth: Core ver 2.22
>[    4.343038] NET: Registered protocol family 31
>[    4.343038] Bluetooth: HCI device and connection manager initialized
>[    4.343041] Bluetooth: HCI socket layer initialized
>[    4.343042] Bluetooth: L2CAP socket layer initialized
>[    4.343046] Bluetooth: SCO socket layer initialized
>[    4.344445] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2113)
>[    4.351014] usbcore: registered new interface driver btusb
>[    4.352060] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
>[    4.353064] Bluetooth: hci0: Device revision is 16
>[    4.353064] Bluetooth: hci0: Secure boot is enabled
>[    4.353065] Bluetooth: hci0: OTP lock is enabled
>[    4.353065] Bluetooth: hci0: API lock is enabled
>[    4.353065] Bluetooth: hci0: Debug lock is disabled
>[    4.353066] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
>[    4.353760] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
>[    4.362705] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
>[    4.362706] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
>[    4.362707] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
>[    4.362708] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
>[    4.362810] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input12
>[    4.362905] usbcore: registered new interface driver uvcvideo
>[    4.362905] USB Video Class driver (1.1.1)
>[    4.382201] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    4.382224] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    4.382244] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    4.382262] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    4.382278] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    4.382293] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    4.382308] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    4.382322] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    4.382336] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    4.382639] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
>[    4.383272] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
>[    4.383319] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
>[    4.383358] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
>[    4.383416] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
>[    4.383467] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
>[    4.383516] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
>[    4.383565] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
>[    4.386407] usb 3-1.4.4: new high-speed USB device number 4 using xhci_hcd
>[    4.458526] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.576655] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.576758] [drm:wait_panel_status [i915]] Wait complete
>[    4.576857] [drm:edp_panel_on [i915]] Wait for panel power on
>[    4.576978] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control abcd0003
>[    4.670018] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    4.670121] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    4.670215] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    4.670385] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    4.779120] [drm:wait_panel_status [i915]] Wait complete
>[    4.779210] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[    4.779328] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    4.779454] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    4.780305] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a
>[    4.780732] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    4.780800] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.780863] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.780933] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.781651] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    4.781709] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    4.781765] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.782473] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    4.782530] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    4.782585] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.783292] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.783350] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    4.784364] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.784433] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[    4.785222] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.785305] [drm:intel_edp_backlight_on [i915]] 
>[    4.785379] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    4.785508] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 505
>[    4.806554] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
>[    4.806658] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    4.806746] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[    4.818828] [drm:verify_connector_state.isra.86 [i915]] [CONNECTOR:71:eDP-1]
>[    4.818931] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
>[    4.819037] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 0
>[    4.819127] [drm:intel_enable_sagv [i915]] Enabling the SAGV
>[    4.819156] Console: switching to colour frame buffer device 240x67
>[    4.835714] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.836019] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.840996] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    4.841102] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    4.841277] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    4.841364] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.841925] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    4.842422] [drm:drm_dp_send_enum_path_resources.isra.16 [drm_kms_helper]] enum path resources 3: 1280 1280
>[    4.843154] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    4.843246] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    4.843333] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.847053] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.906434] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    4.906438] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.906451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
>[    4.906499] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[    4.906540] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    4.906566] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.906594] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.906998] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    4.907620] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    4.907636] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.907648] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    4.907673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
>[    4.907686] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    4.907692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1]
>[    4.907725] [drm:intel_dp_detect [i915]] [CONNECTOR:78:DP-1]
>[    4.907748] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.907791] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.907803] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] disconnected
>[    4.907809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1]
>[    4.907832] [drm:intel_hdmi_detect [i915]] [CONNECTOR:84:HDMI-A-1]
>[    4.959164] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    4.961848] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.961864] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    4.961880] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    4.964533] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.964548] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    5.016500] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    5.019180] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.019184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] disconnected
>[    5.019191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2]
>[    5.019209] [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2]
>[    5.019221] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.019658] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 01 01 83 02 00 04 00 00 00 04
>[    5.020371] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    5.020386] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    5.020401] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    5.020785] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 90-cc-24 dev-ID SYNAS" HW-rev 1.0 SW-rev 5.2 quirks 0x0000
>[    5.021081] [drm:intel_dp_detect [i915]] Sink is MST capable
>[    5.021093] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.021101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] disconnected
>[    5.021105] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2]
>[    5.021151] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=378/1515
>[    5.021168] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 396
>[    5.021244] [drm:intel_hdmi_detect [i915]] [CONNECTOR:94:HDMI-A-2]
>[    5.021455] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.021469] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.021681] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.021710] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    5.021729] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.021749] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    5.024415] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    5.024438] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    5.024672] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.024694] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.024973] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.024993] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.024997] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] disconnected
>[    5.025001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3]
>[    5.025005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3] status updated from unknown to disconnected
>[    5.025008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3] disconnected
>[    5.025011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4]
>[    5.025014] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4] status updated from unknown to disconnected
>[    5.025016] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4] disconnected
>[    5.025019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5]
>[    5.025021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5] status updated from unknown to connected
>[    5.025035] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.025303] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.030444] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.030462] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.030526] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.030537] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.030971] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.032242] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.032257] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.032269] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.039793] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.039862] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.039983] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.040032] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.040554] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.042584] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.042641] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.042686] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.047184] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.047252] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.047374] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.047424] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.047945] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.049978] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.050035] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.050080] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.051573] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.051637] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.051767] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.051816] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.052333] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.054635] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.054692] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.054737] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.056031] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.056094] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.056160] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.056202] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.056714] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.056760] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.060206] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.060274] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.060405] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.060455] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.060978] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.063009] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.063065] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.063111] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.064336] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.064401] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.064491] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.064533] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.065041] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.067092] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.067158] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.067208] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.069198] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.069267] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.069341] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.069383] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.069899] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    5.071298] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support
>[    5.071331] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    5.071365] [drm:drm_add_edid_modes [drm]] ELD monitor EV2436W
>[    5.071392] [drm:drm_add_edid_modes [drm]] ELD size 32, SAD count 1
>[    5.071419] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    5.071708] [drm:drm_mode_debug_printmodeline [drm]] Modeline 106:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    5.071738] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1200 mode: VIRTUAL_Y
>[    5.071767] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    5.071792] [drm:drm_mode_prune_invalid [drm]] Not using 1600x1200 mode: VIRTUAL_Y
>[    5.071815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5] probed modes :
>[    5.071843] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    5.071869] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    5.071927] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    5.071982] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.072006] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    5.072029] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.072071] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.072094] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.072116] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.072138] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    5.072160] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    5.072182] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.072204] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.072225] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.072247] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.072269] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.072291] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.072313] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.072334] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.072358] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    5.072377] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
>[    5.072394] [drm:drm_setup_crtcs [drm_kms_helper]] connector 78 enabled? no
>[    5.072406] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no
>[    5.072417] [drm:drm_setup_crtcs [drm_kms_helper]] connector 89 enabled? no
>[    5.072427] [drm:drm_setup_crtcs [drm_kms_helper]] connector 94 enabled? no
>[    5.072438] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
>[    5.072448] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? no
>[    5.072458] [drm:drm_setup_crtcs [drm_kms_helper]] connector 103 enabled? yes
>[    5.072525] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    5.072540] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
>[    5.072551] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
>[    5.072561] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    5.072571] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 103
>[    5.072581] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 103 0
>[    5.072592] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1680x1050
>[    5.072602] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    5.072631] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
>[    5.072642] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1680x1050 set on crtc 55 (0,0)
>[    5.072759] [drm:intel_atomic_check [i915]] [CONNECTOR:103:DP-5] checking for sink bpp constrains
>[    5.072820] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    5.072838] [drm:drm_dp_atomic_find_vcpi_slots [drm_kms_helper]] vcpi slots req=14, avail=63
>[    5.072850] [drm:drm_dp_atomic_find_vcpi_slots [drm_kms_helper]] vcpi slots avail=49
>[    5.072912] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    5.072982] [drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][modeset]
>[    5.073041] [drm:intel_dump_pipe_config [i915]] output_types: DP_MST (0x800)
>[    5.073099] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    5.073156] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1703936, gmch_n: 8388608, link_m: 283989, link_n: 1048576, tu: 14
>[    5.073212] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 0
>[    5.073267] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    5.073296] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    5.073352] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    5.073379] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    5.073438] [drm:intel_dump_pipe_config [i915]] crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x40 flags: 0x6
>[    5.073495] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1680x1050, pixel rate 146250
>[    5.073552] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    5.073621] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    5.073677] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    5.073734] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    5.073789] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    5.073846] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] disabled, scaler_id = -1
>[    5.073901] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
>[    5.073956] [drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
>[    5.074023] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz
>[    5.074079] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1
>[    5.074153] [drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
>[    5.074215] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[    5.074276] [drm:intel_find_shared_dpll [i915]] [CRTC:55:pipe B] allocated DPLL 1
>[    5.074333] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe B
>[    5.074437] [drm:intel_edp_backlight_off [i915]] 
>[    5.074574] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.074639] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.074742] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.074811] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.075354] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.075425] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.078671] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    5.078735] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    5.078837] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    5.078901] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.079443] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    5.079513] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.346480] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    5.346528] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    5.354483] [drm:intel_edp_panel_off.part.31 [i915]] Turn eDP port A panel power off
>[    5.354522] [drm:intel_edp_panel_off.part.31 [i915]] Wait for panel power off time
>[    5.354590] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control abcd0000
>[    5.406475] [drm:wait_panel_status [i915]] Wait complete
>[    5.406489] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[    5.406509] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
>[    5.406528] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
>[    5.406545] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
>[    5.406559] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.406585] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1
>[    5.406837] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    5.406854] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    5.406872] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    5.406900] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    5.406972] [drm:intel_disable_sagv [i915]] Disabling the SAGV
>[    5.406993] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
>[    5.407009] [drm:intel_atomic_commit_tail [i915]] [ENCODER:77:DDI B]
>[    5.407025] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DP-MST A]
>[    5.407041] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DP-MST B]
>[    5.407057] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP-MST C]
>[    5.407073] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DDI C]
>[    5.407089] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DP-MST A]
>[    5.407105] [drm:intel_atomic_commit_tail [i915]] [ENCODER:91:DP-MST B]
>[    5.407121] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST C]
>[    5.407137] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 0
>[    5.407153] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 1
>[    5.407169] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 2
>[    5.407185] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 3
>[    5.407203] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
>[    5.407219] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[    5.407237] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    5.407259] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    5.496205] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
>[    5.632246] usb 3-1.4.4: New USB device found, idVendor=17ef, idProduct=306f, bcdDevice= 0.12
>[    5.632247] usb 3-1.4.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>[    5.632248] usb 3-1.4.4: Product: ThinkPad Dock USB Audio
>[    5.632249] usb 3-1.4.4: Manufacturer: Generic
>[    5.647022] input: Generic ThinkPad Dock USB Audio Consumer Control as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/0000:05:02.0/0000:3c:00.0/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.3/0003:17EF:306F.0002/input/input20
>[    5.716598] input: Generic ThinkPad Dock USB Audio as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/0000:05:02.0/0000:3c:00.0/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.3/0003:17EF:306F.0002/input/input21
>[    5.716790] hid-generic 0003:17EF:306F.0002: input,hiddev1,hidraw1: USB HID v1.11 Device [Generic ThinkPad Dock USB Audio] on usb-0000:3c:00.0-1.4.4/input3
>[    5.746560] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
>[    5.748806] IPv6: ADDRCONF(NETDEV_UP): wlp61s0: link is not ready
>[    5.956715] Bluetooth: hci0: Waiting for firmware download to complete
>[    5.957103] Bluetooth: hci0: Firmware loaded in 1568448 usecs
>[    5.957178] Bluetooth: hci0: Waiting for device to boot
>[    5.959236] usbcore: registered new interface driver snd-usb-audio
>[    5.969218] Bluetooth: hci0: Device booted in 11791 usecs
>[    5.971047] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
>[    5.974149] Bluetooth: hci0: Applying Intel DDC parameters completed
>[    5.982302] IPv6: ADDRCONF(NETDEV_UP): wlp61s0: link is not ready
>[    6.026665] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[    6.026881] [drm:wait_panel_status [i915]] Wait complete
>[    6.027214] [drm:edp_panel_on [i915]] Wait for panel power on
>[    6.027534] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control abcd0003
>[    6.120790] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    6.120874] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    6.120946] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    6.121079] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    6.229344] [drm:wait_panel_status [i915]] Wait complete
>[    6.229408] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[    6.229507] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    6.229622] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    6.230475] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a
>[    6.230951] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    6.231011] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    6.231072] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    6.231133] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    6.231865] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    6.231925] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    6.231984] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    6.232771] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    6.232830] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    6.232889] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    6.233629] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    6.233688] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    6.234714] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    6.234777] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[    6.235510] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    6.235588] [drm:intel_edp_backlight_on [i915]] 
>[    6.235649] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    6.235835] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 396
>[    6.236981] IPv6: ADDRCONF(NETDEV_UP): wlp61s0: link is not ready
>[    6.256585] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
>[    6.256694] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    6.256786] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[    6.268087] kauditd_printk_skb: 17 callbacks suppressed
>[    6.268090] audit: type=1130 audit(1559111769.459:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    6.268998] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 2, on? 0) for crtc 55
>[    6.269067] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1
>[    6.269229] [drm:intel_mst_pre_enable_dp [i915]] active links 0
>[    6.275194] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.275258] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.275332] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.275829] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.276340] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[    6.277004] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
>[    6.277178] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.277229] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.277642] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    6.277685] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    6.277727] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    6.277768] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    6.294625] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    6.294657] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[    6.312582] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    6.313350] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:89:DP-2] Link Training Passed at Link Rate = 540000, Lane count = 4
>[    6.313507] [drm:drm_dp_mst_allocate_vcpi [drm_kms_helper]] initing vcpi for pbn=524 slots=14
>[    6.314322] [drm:intel_enable_pipe [i915]] enabling pipe B
>[    6.314545] [drm:intel_mst_enable_dp [i915]] active links 1
>[    6.314833] [drm:drm_dp_update_payload_part2 [drm_kms_helper]] payload 0 1
>[    6.320259] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.320277] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.320331] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.320759] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.321206] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:103:DP-5], [ENCODER:91:DP-MST B]
>[    6.321224] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe B, 32 bytes ELD
>[    6.321243] [drm:hsw_audio_config_update [i915]] using automatic Maud, Naud
>[    6.321774] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.321790] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.331288] [drm:verify_connector_state.isra.86 [i915]] [CONNECTOR:71:eDP-1]
>[    6.331314] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
>[    6.331345] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 0
>[    6.331377] [drm:verify_connector_state.isra.86 [i915]] [CONNECTOR:103:DP-5]
>[    6.331399] [drm:intel_atomic_commit_tail [i915]] [CRTC:55:pipe B]
>[    6.331428] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 1
>[    6.331477] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    6.331481] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    6.331486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
>[    6.331505] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[    6.331523] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.331539] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    6.331555] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    6.331949] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    6.332554] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.332563] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    6.332570] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.332584] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
>[    6.332591] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    6.332594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1]
>[    6.332611] [drm:intel_dp_detect [i915]] [CONNECTOR:78:DP-1]
>[    6.332621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] disconnected
>[    6.332625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1]
>[    6.332640] [drm:intel_hdmi_detect [i915]] [CONNECTOR:84:HDMI-A-1]
>[    6.385309] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.388083] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.388153] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.388220] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    6.390927] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.390993] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    6.441712] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.441715] IPv6: ADDRCONF(NETDEV_UP): wlp61s0: link is not ready
>[    6.444468] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.444486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] disconnected
>[    6.444503] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2]
>[    6.444575] [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2]
>[    6.445112] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 01 01 83 02 00 04 00 00 00 04
>[    6.445950] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.446015] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    6.446078] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    6.446513] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 90-cc-24 dev-ID SYNAS" HW-rev 1.0 SW-rev 5.2 quirks 0x0000
>[    6.446904] [drm:intel_dp_detect [i915]] Sink is MST capable
>[    6.446920] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] disconnected
>[    6.446936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2]
>[    6.447000] [drm:intel_hdmi_detect [i915]] [CONNECTOR:94:HDMI-A-2]
>[    6.447367] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    6.447430] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    6.447696] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    6.447747] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.447818] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.447880] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    6.450599] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.450670] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    6.450939] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    6.451001] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    6.451249] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    6.451280] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.451294] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] disconnected
>[    6.451309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3]
>[    6.451322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3] disconnected
>[    6.451334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4]
>[    6.451345] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4] disconnected
>[    6.451356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5]
>[    6.456702] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.456775] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.456862] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.457381] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.458837] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.458899] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.508468] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.508546] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.508677] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.509213] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.511285] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.511349] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.515917] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.515993] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.516122] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.516653] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.518718] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.518782] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.520047] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.520124] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.520253] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.520784] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.523129] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.523194] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.524787] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.524860] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.524953] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.525467] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.529168] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.529245] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.529385] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.529924] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.531990] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.532053] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.533051] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.533123] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.533216] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.533728] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.535769] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.535830] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.538237] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.538314] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.538444] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.538975] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.540398] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support
>[    6.540433] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.540475] [drm:drm_add_edid_modes [drm]] ELD monitor EV2436W
>[    6.540505] [drm:drm_add_edid_modes [drm]] ELD size 32, SAD count 1
>[    6.540538] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.540886] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    6.540914] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1200 mode: VIRTUAL_Y
>[    6.540946] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    6.540974] [drm:drm_mode_prune_invalid [drm]] Not using 1600x1200 mode: VIRTUAL_Y
>[    6.541050] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.541126] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.541145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5] probed modes :
>[    6.541182] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    6.541209] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    6.541235] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    6.541261] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.541287] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.541312] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.541337] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    6.541362] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    6.541386] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.541412] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.541437] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.541461] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.541486] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.541510] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.541535] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.541559] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.541585] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    6.541601] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
>[    6.541616] [drm:drm_setup_crtcs [drm_kms_helper]] connector 78 enabled? no
>[    6.541629] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no
>[    6.541641] [drm:drm_setup_crtcs [drm_kms_helper]] connector 89 enabled? no
>[    6.541653] [drm:drm_setup_crtcs [drm_kms_helper]] connector 94 enabled? no
>[    6.541665] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
>[    6.541677] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? no
>[    6.541689] [drm:drm_setup_crtcs [drm_kms_helper]] connector 103 enabled? yes
>[    6.541762] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    6.541778] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
>[    6.541791] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
>[    6.541802] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    6.541814] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 103
>[    6.541825] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 103 0
>[    6.541837] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1680x1050
>[    6.541849] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    6.541871] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
>[    6.541883] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1680x1050 set on crtc 55 (0,0)
>[    6.543535] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.543607] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.543704] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.544228] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.547684] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.547762] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.547909] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.548438] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.569251] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    6.569267] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    6.569287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
>[    6.569375] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[    6.569455] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.569527] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    6.569597] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    6.570059] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    6.570770] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.570806] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    6.570835] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.570891] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
>[    6.570922] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    6.570936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1]
>[    6.571004] [drm:intel_dp_detect [i915]] [CONNECTOR:78:DP-1]
>[    6.571028] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] disconnected
>[    6.571042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1]
>[    6.571107] [drm:intel_hdmi_detect [i915]] [CONNECTOR:84:HDMI-A-1]
>[    6.622499] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.625251] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.625326] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.625396] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    6.628130] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.628195] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    6.679621] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.682357] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.682375] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] disconnected
>[    6.682393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2]
>[    6.682469] [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2]
>[    6.683003] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 01 01 83 02 00 04 00 00 00 04
>[    6.683842] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.683906] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    6.683969] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    6.684405] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 90-cc-24 dev-ID SYNAS" HW-rev 1.0 SW-rev 5.2 quirks 0x0000
>[    6.684785] [drm:intel_dp_detect [i915]] Sink is MST capable
>[    6.684801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] disconnected
>[    6.684816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2]
>[    6.684878] [drm:intel_hdmi_detect [i915]] [CONNECTOR:94:HDMI-A-2]
>[    6.685097] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    6.685158] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    6.685407] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    6.685456] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.685518] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.685580] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    6.688317] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.688380] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    6.688645] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    6.688706] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    6.688953] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    6.688985] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.688998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] disconnected
>[    6.689013] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3]
>[    6.689027] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3] disconnected
>[    6.689039] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4]
>[    6.689049] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4] disconnected
>[    6.689060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5]
>[    6.694522] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.694600] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.694688] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.695211] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.696663] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.696726] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.704256] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.704335] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.704474] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.705012] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.707077] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.707142] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.711632] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.711709] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.711851] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.712384] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.714451] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.714515] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.715932] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.716005] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.716081] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.716596] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.718940] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.719001] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.720569] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.720646] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.720790] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.721321] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.724747] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.724823] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.724954] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.725486] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.727579] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.727645] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.728875] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.728952] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.729082] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.729615] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.731682] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.731745] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.733775] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.733847] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.733944] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.734455] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.735866] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support
>[    6.735902] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.735943] [drm:drm_add_edid_modes [drm]] ELD monitor EV2436W
>[    6.735975] [drm:drm_add_edid_modes [drm]] ELD size 32, SAD count 1
>[    6.736007] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.736345] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    6.736374] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1200 mode: VIRTUAL_Y
>[    6.736406] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    6.736464] [drm:drm_mode_prune_invalid [drm]] Not using 1600x1200 mode: VIRTUAL_Y
>[    6.736539] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.736617] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.736648] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5] probed modes :
>[    6.736679] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    6.736709] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    6.736735] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    6.736761] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.736789] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.736814] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.736839] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    6.736864] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    6.736891] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.736916] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.736941] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.736966] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.736993] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.737018] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.737042] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.737067] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.737094] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    6.737111] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
>[    6.737126] [drm:drm_setup_crtcs [drm_kms_helper]] connector 78 enabled? no
>[    6.737140] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no
>[    6.737152] [drm:drm_setup_crtcs [drm_kms_helper]] connector 89 enabled? no
>[    6.737164] [drm:drm_setup_crtcs [drm_kms_helper]] connector 94 enabled? no
>[    6.737177] [drm:drm_setup_crtcs [drm_kms_helper]] connector 100 enabled? no
>[    6.737189] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? no
>[    6.737203] [drm:drm_setup_crtcs [drm_kms_helper]] connector 103 enabled? yes
>[    6.737275] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    6.737291] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
>[    6.737306] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
>[    6.737317] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    6.737329] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 103
>[    6.737340] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 103 0
>[    6.737353] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1680x1050
>[    6.737366] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    6.737388] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
>[    6.737400] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1680x1050 set on crtc 55 (0,0)
>[    6.739117] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.739194] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.739338] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.739870] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.743252] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.743329] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.743464] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.743996] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.839093] [drm:drm_mode_addfb2 [drm]] [FB:111]
>[    6.839800] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb
>[    6.839833] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.839875] [drm:drm_mode_addfb2 [drm]] [FB:111]
>[    6.839965] [drm:intel_framebuffer_init [i915]] unsupported pixel format: RG24 little-endian (0x34324752)
>[    6.839996] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.843852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
>[    6.843925] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[    6.843999] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.844066] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    6.844130] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    6.844600] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    6.845317] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.845353] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    6.845381] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.845437] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
>[    6.845467] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[    6.848004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1]
>[    6.848074] [drm:intel_dp_detect [i915]] [CONNECTOR:78:DP-1]
>[    6.848100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:78:DP-1] disconnected
>[    6.848148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2]
>[    6.848214] [drm:intel_dp_detect [i915]] [CONNECTOR:89:DP-2]
>[    6.848743] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 01 01 83 02 00 04 00 00 00 04
>[    6.849591] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.849654] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    6.849716] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    6.850157] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 90-cc-24 dev-ID SYNAS" HW-rev 1.0 SW-rev 5.2 quirks 0x0000
>[    6.850546] [drm:intel_dp_detect [i915]] Sink is MST capable
>[    6.850561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:89:DP-2] disconnected
>[    6.850610] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3]
>[    6.850624] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:DP-3] disconnected
>[    6.850658] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4]
>[    6.850669] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:DP-4] disconnected
>[    6.850701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5]
>[    6.856105] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.856177] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.856308] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.856839] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.858336] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.858405] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.865663] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.865740] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.865880] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.866417] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.868504] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.868568] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.873127] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.873204] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.873303] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.873823] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.875872] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.875934] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.877415] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.877492] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.877622] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.878153] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.880544] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.880609] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.882000] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.882072] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.882164] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.882675] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.886203] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.886271] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.886388] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.886967] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.889013] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.889074] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.890363] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.890440] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.890536] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.891052] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.893101] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.893162] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.895192] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.895264] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.895340] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.895850] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    6.897279] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support
>[    6.897315] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.897357] [drm:drm_add_edid_modes [drm]] ELD monitor EV2436W
>[    6.897389] [drm:drm_add_edid_modes [drm]] ELD size 32, SAD count 1
>[    6.897420] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.897774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-5] probed modes :
>[    6.897807] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    6.897839] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    6.897872] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    6.897934] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    6.897996] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.898025] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    6.898051] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    6.898076] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.898102] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.898130] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    6.898155] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    6.898181] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    6.898208] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.898233] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.898257] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.898282] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.898308] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    6.898333] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.898358] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.898385] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    6.898409] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    6.899919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1]
>[    6.899991] [drm:intel_hdmi_detect [i915]] [CONNECTOR:84:HDMI-A-1]
>[    6.900611] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.900687] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.900818] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.901350] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.904743] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    6.904820] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    6.904950] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    6.905483] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    6.952461] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.955216] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.955291] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.955361] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    6.958105] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.958177] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    7.009425] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    7.012162] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.012180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:HDMI-A-1] disconnected
>[    7.012311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2]
>[    7.012387] [drm:intel_hdmi_detect [i915]] [CONNECTOR:94:HDMI-A-2]
>[    7.012674] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.012742] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.013000] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.013054] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.013121] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    7.013187] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    7.015901] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.015969] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    7.016242] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.016306] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.016564] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.016599] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.016613] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:HDMI-A-2] disconnected
>[    7.067824] [drm:drm_mode_addfb2 [drm]] [FB:116]
>[    7.969075] [drm:drm_mode_addfb2 [drm]] [FB:128]
>[    7.969205] [drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
>[    7.969244] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
>[    7.985819] [drm:drm_mode_setcrtc [drm]] [CRTC:55:pipe B]
>[    7.985862] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:103:DP-5]
>[    7.985909] [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] vcpi slots released=14, avail=63
>[    7.986005] [drm:intel_atomic_check [i915]] [CONNECTOR:103:DP-5] checking for sink bpp constrains
>[    7.986078] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    7.986101] [drm:drm_dp_atomic_find_vcpi_slots [drm_kms_helper]] vcpi slots req=14, avail=63
>[    7.986114] [drm:drm_dp_atomic_find_vcpi_slots [drm_kms_helper]] vcpi slots avail=49
>[    7.986189] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    7.986259] [drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][modeset]
>[    7.986330] [drm:intel_dump_pipe_config [i915]] output_types: DP_MST (0x800)
>[    7.986398] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    7.986521] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1794230, gmch_n: 8388608, link_m: 299038, link_n: 1048576, tu: 14
>[    7.986591] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 0
>[    7.986664] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    7.986700] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
>[    7.986769] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    7.986802] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
>[    7.986878] [drm:intel_dump_pipe_config [i915]] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x0 flags: 0x9
>[    7.986947] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1200, pixel rate 154000
>[    7.987017] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    7.987084] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.987150] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    7.987220] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
>[    7.987286] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    7.987359] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] FB:97, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    7.987428] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1680+1050 dst 0x0+1680+1050
>[    7.987497] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
>[    7.987565] [drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
>[    7.987644] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz
>[    7.987712] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1
>[    7.987794] [drm:intel_find_shared_dpll [i915]] [CRTC:55:pipe B] allocated DPLL 1
>[    7.987864] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe B
>[    7.987990] [drm:intel_mst_disable_dp [i915]] active links 1
>[    7.988009] [drm:drm_dp_update_payload_part1 [drm_kms_helper]] 
>[    7.993767] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    7.993846] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    7.994004] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    7.994543] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    7.996130] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    7.996201] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    8.017083] [drm:drm_dp_update_payload_part1 [drm_kms_helper]] removing payload 0
>[    8.017166] [drm:hsw_audio_codec_disable [i915]] Disable audio codec on pipe B
>[    8.017241] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    8.017331] [drm:intel_disable_pipe [i915]] disabling pipe B
>[    8.033370] [drm:drm_dp_mst_put_payload_id.part.8 [drm_kms_helper]] putting payload 1
>[    8.039183] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    8.039216] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    8.039302] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    8.039758] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    8.040698] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[    8.040734] [drm:intel_encoders_post_disable.isra.71 [i915]] active links 0
>[    8.040767] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 2, on? 1) for crtc 55
>[    8.040800] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1
>[    8.040835] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
>[    8.040865] [drm:intel_atomic_commit_tail [i915]] [ENCODER:77:DDI B]
>[    8.040896] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DP-MST A]
>[    8.040926] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DP-MST B]
>[    8.040955] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP-MST C]
>[    8.040985] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DDI C]
>[    8.041013] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    8.041040] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    8.041067] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DP-MST A]
>[    8.041094] [drm:intel_atomic_commit_tail [i915]] [ENCODER:91:DP-MST B]
>[    8.041120] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST C]
>[    8.041147] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 0
>[    8.041174] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 1
>[    8.041201] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 2
>[    8.041227] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 3
>[    8.041256] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 2, on? 0) for crtc 55
>[    8.041283] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1
>[    8.041386] [drm:intel_mst_pre_enable_dp [i915]] active links 0
>[    8.045500] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    8.045532] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    8.045605] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    8.046056] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    8.046537] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[    8.047114] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    8.047147] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    8.047183] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
>[    8.047673] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    8.047706] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    8.047739] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    8.047771] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    8.051011] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    8.051049] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    8.051136] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    8.051597] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    8.064627] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    8.064658] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[    8.082606] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    8.082625] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    8.082644] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    8.100479] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    8.101285] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:89:DP-2] Link Training Passed at Link Rate = 540000, Lane count = 4
>[    8.101443] [drm:drm_dp_mst_allocate_vcpi [drm_kms_helper]] initing vcpi for pbn=551 slots=14
>[    8.102103] [drm:intel_enable_pipe [i915]] enabling pipe B
>[    8.102123] [drm:intel_mst_enable_dp [i915]] active links 1
>[    8.102722] [drm:drm_dp_update_payload_part2 [drm_kms_helper]] payload 0 1
>[    8.108399] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040, long 0x00000000
>[    8.108418] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short
>[    8.108476] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short
>[    8.108908] [drm:intel_dp_check_mst_status [i915]] got esi 01 10 00
>[    8.109362] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:103:DP-5], [ENCODER:91:DP-MST B]
>[    8.109380] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe B, 32 bytes ELD
>[    8.109400] [drm:hsw_audio_config_update [i915]] using automatic Maud, Naud
>[    8.109926] [drm:intel_dp_check_mst_status [i915]] got esi2 01 00 00
>[    8.109942] [drm:intel_dp_check_mst_status [i915]] got esi 01 00 00
>[    8.119089] [drm:verify_connector_state.isra.86 [i915]] [CONNECTOR:103:DP-5]
>[    8.119110] [drm:intel_atomic_commit_tail [i915]] [CRTC:55:pipe B]
>[    8.119137] [drm:verify_single_dpll_state.isra.47 [i915]] DPLL 1
>[    8.140493] audit: type=1130 audit(1559111771.329:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    8.146600] audit: type=1006 audit(1559111771.339:30): pid=526 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
>[    8.172688] audit: type=1130 audit(1559111771.359:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    8.286153] fuse init (API version 7.27)
>[    8.387142] [drm:drm_mode_addfb2 [drm]] [FB:133]
>[    8.590197] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    8.590205] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
>[    8.590274] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
>[    9.361180] audit: type=1131 audit(1559111772.549:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    9.866452] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[    9.866514] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   14.430653] audit: type=1006 audit(1559111777.619:33): pid=568 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
>[   14.442880] IPv6: ADDRCONF(NETDEV_UP): wlp61s0: link is not ready
>[   14.448414] audit: type=1130 audit(1559111777.639:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   14.454575] audit: type=1006 audit(1559111777.639:35): pid=579 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
>[   14.488261] audit: type=1130 audit(1559111777.679:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   14.496181] audit: type=1112 audit(1559111777.679:37): pid=568 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=zam363 addr=? terminal=/dev/tty7 res=success'
>[   15.273253] wlp61s0: authenticate with [MAC Redacted]
>[   15.283033] wlp61s0: send auth to [MAC Redacted] (try 1/3)
>[   15.288515] wlp61s0: authenticated
>[   15.296444] wlp61s0: associate with [MAC Redacted] (try 1/3)
>[   15.298097] wlp61s0: RX AssocResp from [MAC Redacted] (capab=0x111 status=0 aid=46)
>[   15.300672] wlp61s0: associated
>[   15.389795] wlp61s0: Limiting TX power to 14 dBm as advertised by [MAC Redacted]
>[   15.393838] IPv6: ADDRCONF(NETDEV_CHANGE): wlp61s0: link becomes ready
>[   15.995178] audit: type=1131 audit(1559111779.179:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   20.428775] thunderbolt 0000:06:00.0: stopping RX ring 0
>[   20.428787] thunderbolt 0000:06:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
>[   20.428808] thunderbolt 0000:06:00.0: stopping TX ring 0
>[   20.428817] thunderbolt 0000:06:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
>[   20.428828] thunderbolt 0000:06:00.0: control channel stopped

Actions: View

Attachments on bug 110782: 144368 | 144369 | 144424 | 144473 | 144474 | 144475 | 144494 | 144499 | 144504

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.