Attachment 139017 Details for Bug 106191 – dmesg with 4.16.3

dmesg with 4.16.3

messages-4.16.3 (text/plain), 82.60 KB, created by François Jacques on 2018-04-23 17:14:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: François Jacques

Created: 2018-04-23 17:14:07 UTC

Size: 82.60 KB

patch

obsolete

>[    0.000000] Linux version 4.16.3-gentoo-xw8600-fj (root@xw8600) (gcc version 5.4.0 (Funtoo Hardened 5.4.0-r1, pie-0.6.5)) #1 SMP PREEMPT Mon Apr 23 10:10:23 EDT 2018
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.3-gentoo-xw8600-fj root=/dev/sdc3 rootfstype=xfs intel_iommu=on lvm softraid root=/dev/sdc3 rootfstype=xfs
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffc283f] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cffc2840-0x00000000cfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.5 present.
>[    0.000000] DMI: Hewlett-Packard HP xw8600 Workstation/0A98h, BIOS 786F5 v01.46 09/20/2012
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-E7FFF write-protect
>[    0.000000]   E8000-EFFFF write-back
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0830000000 mask 3FF0000000 uncachable
>[    0.000000]   1 base 00D0000000 mask 3FF0000000 uncachable
>[    0.000000]   2 base 00E0000000 mask 3FE0000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xcffc2 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [        (ptrval)]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [        (ptrval)] 90000 size 24576
>[    0.000000] BRK [0x3596b000, 0x3596bfff] PGTABLE
>[    0.000000] BRK [0x3596c000, 0x3596cfff] PGTABLE
>[    0.000000] BRK [0x3596d000, 0x3596dfff] PGTABLE
>[    0.000000] BRK [0x3596e000, 0x3596efff] PGTABLE
>[    0.000000] BRK [0x3596f000, 0x3596ffff] PGTABLE
>[    0.000000] BRK [0x35970000, 0x35970fff] PGTABLE
>[    0.000000] BRK [0x35971000, 0x35971fff] PGTABLE
>[    0.000000] BRK [0x35972000, 0x35972fff] PGTABLE
>[    0.000000] BRK [0x35973000, 0x35973fff] PGTABLE
>[    0.000000] BRK [0x35974000, 0x35974fff] PGTABLE
>[    0.000000] BRK [0x35975000, 0x35975fff] PGTABLE
>[    0.000000] BRK [0x35976000, 0x35976fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x37bf9000-0x37df3fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000E9810 000024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 0x00000000CFFC52EC 00006C (v01 HPQOEM SLIC-WKS 20120920      00000000)
>[    0.000000] ACPI: FACP 0x00000000CFFC5494 0000F4 (v03 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20180105/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20180105/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20180105/tbfadt-708)
>[    0.000000] ACPI: DSDT 0x00000000CFFC5A7A 0026A4 (v01 HPQOEM DSDT     00000001 MSFT 0100000E)
>[    0.000000] ACPI: FACS 0x00000000CFFC5200 000040
>[    0.000000] ACPI: FACS 0x00000000CFFC5200 000040
>[    0.000000] ACPI: SSDT 0x00000000CFFC811E 006EDA (v01 HPQOEM PROJECT  00000001 MSFT 0100000E)
>[    0.000000] ACPI: APIC 0x00000000CFFC5588 0000D4 (v01 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: ASF! 0x00000000CFFC565C 00006A (v32 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: MCFG 0x00000000CFFC585E 00003C (v01 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: SLIC 0x00000000CFFC589A 000176 (v01 HPQOEM SLIC-WKS 00000001      00000000)
>[    0.000000] ACPI: HPET 0x00000000CFFC5A10 000038 (v01 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: TCPA 0x00000000CFFC5A48 000032 (v01 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: DMAR 0x00000000CFFC56C6 000120 (v01 HPQOEM SEABURG  00000001      00000000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000082fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000095fff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cffc1fff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000082fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082fffffff]
>[    0.000000] On node 0 totalpages: 8388439
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3989 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13248 pages used for memmap
>[    0.000000]   DMA32 zone: 847810 pages, LIFO batch:31
>[    0.000000]   Normal zone: 117760 pages used for memmap
>[    0.000000]   Normal zone: 7536640 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 107 pages
>[    0.000000] ACPI: PM-Timer IO Port: 0xf808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
>[    0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s139416 r8192 d32616 u262144
>[    0.000000] pcpu-alloc: s139416 r8192 d32616 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8257346
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.3-gentoo-xw8600-fj root=/dev/sdc3 rootfstype=xfs intel_iommu=on lvm softraid root=/dev/sdc3 rootfstype=xfs
>[    0.000000] DMAR: IOMMU enabled
>[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.000000] Memory: 32884604K/33553756K available (12300K kernel code, 1441K rwdata, 3176K rodata, 1200K init, 764K bss, 669152K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS: 4352, nr_irqs: 1304, preallocated irqs: 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180105
>[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.000000] DMAR: Host address width 36
>[    0.000000] DMAR: DRHD base: 0x000000fe710000 flags: 0x0
>[    0.000000] DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
>[    0.000000] DMAR: DRHD base: 0x000000fe712000 flags: 0x0
>[    0.000000] DMAR: dmar1: reg_base_addr fe712000 ver 1:0 cap 900800c2f0462 ecap e01
>[    0.000000] DMAR: DRHD base: 0x000000fe714000 flags: 0x0
>[    0.000000] DMAR: dmar2: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
>[    0.000000] DMAR: DRHD base: 0x000000fe719000 flags: 0x0
>[    0.000000] DMAR: dmar3: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
>[    0.000000] DMAR: DRHD base: 0x000000fe718000 flags: 0x1
>[    0.000000] DMAR: dmar4: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
>[    0.000000] DMAR: RMRR base: 0x000000cffd3000 end: 0x000000cffd3fff
>[    0.000000] DMAR: RMRR base: 0x000000cffd4000 end: 0x000000cffd4fff
>[    0.000000] DMAR: RMRR base: 0x000000cffd5000 end: 0x000000cffd5fff
>[    0.000000] DMAR: RMRR base: 0x000000cffd6000 end: 0x000000cffd6fff
>[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.006000] tsc: Fast TSC calibration using PIT
>[    0.007000] tsc: Detected 3000.198 MHz processor
>[    0.007000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3f00cd52f, max_idle_ns: 440795355325 ns
>[    0.007000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.39 BogoMIPS (lpj=3000198)
>[    0.007000] pid_max: default: 32768 minimum: 301
>[    0.007000] Security Framework initialized
>[    0.007000] SELinux:  Initializing.
>[    0.007000] SELinux:  Starting in permissive mode
>[    0.007000] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.007000] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.008280] CPU: Physical Processor ID: 0
>[    0.008329] CPU: Processor Core ID: 0
>[    0.008378] mce: CPU supports 6 MCE banks
>[    0.008433] CPU0: Thermal monitoring enabled (TM2)
>[    0.008484] process: using mwait in idle threads
>[    0.008537] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.008587] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>[    0.008638] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
>[    0.008831] Freeing SMP alternatives memory: 40K
>[    0.010000] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5450  @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
>[    0.013016] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
>[    0.013113] ... version:                2
>[    0.013161] ... bit width:              40
>[    0.013209] ... generic registers:      2
>[    0.013258] ... value mask:             000000ffffffffff
>[    0.013307] ... max period:             000000007fffffff
>[    0.013356] ... fixed-purpose events:   3
>[    0.013405] ... event mask:             0000000700000003
>[    0.015004] Hierarchical SRCU implementation.
>[    0.019250] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.021004] smp: Bringing up secondary CPUs ...
>[    0.029020] x86: Booting SMP configuration:
>[    0.029072] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.149064] smp: Brought up 1 node, 8 CPUs
>[    0.150114] smpboot: Max logical packages: 2
>[    0.150170] smpboot: Total of 8 processors activated (48001.56 BogoMIPS)
>[    0.153167] devtmpfs: initialized
>[    0.153317] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.153317] kworker/u16:0 (59) used greatest stack depth: 14312 bytes left
>[    0.153317] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.154111] xor: measuring software checksum speed
>[    0.164002]    prefetch64-sse: 17032.000 MB/sec
>[    0.174001]    generic_sse: 14432.000 MB/sec
>[    0.174051] xor: using function: prefetch64-sse (17032.000 MB/sec)
>[    0.174674] RTC time: 16:05:07, date: 04/23/18
>[    0.174852] NET: Registered protocol family 16
>[    0.175042] audit: initializing netlink subsys (disabled)
>[    0.175101] audit: type=2000 audit(1524499507.175:1): state=initialized audit_enabled=0 res=1
>[    0.175156] kworker/u16:0 (62) used greatest stack depth: 13800 bytes left
>[    0.176012] cpuidle: using governor ladder
>[    0.177009] cpuidle: using governor menu
>[    0.177124] ACPI: bus type PCI registered
>[    0.177241] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.177324] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.177389] PCI: Using configuration type 1 for base access
>[    0.181401] kworker/u16:2 (376) used greatest stack depth: 13792 bytes left
>[    0.182143] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.199016] raid6: sse2x1   gen()  4152 MB/s
>[    0.215973] raid6: sse2x1   xor()  5171 MB/s
>[    0.232979] raid6: sse2x2   gen()  4226 MB/s
>[    0.249973] raid6: sse2x2   xor()  6320 MB/s
>[    0.266969] raid6: sse2x4   gen()  8890 MB/s
>[    0.283968] raid6: sse2x4   xor()  6996 MB/s
>[    0.284002] raid6: using algorithm sse2x4 gen() 8890 MB/s
>[    0.284051] raid6: .... xor() 6996 MB/s, rmw enabled
>[    0.284101] raid6: using ssse3x2 recovery algorithm
>[    0.284247] ACPI: Added _OSI(Module Device)
>[    0.284298] ACPI: Added _OSI(Processor Device)
>[    0.284347] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.284396] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.286495] ACPI: Dynamic OEM Table Load:
>[    0.286551] ACPI: SSDT 0xFFFF914D4C099000 0008C4 (v01 HPQOEM CPU_TM2  00000001 MSFT 0100000E)
>[    0.287331] ACPI: Interpreter enabled
>[    0.287395] ACPI: (supports S0 S3 S5)
>[    0.287444] ACPI: Using IOAPIC for interrupt routing
>[    0.287515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.287739] ACPI: Enabled 8 GPEs in block 00 to 1F
>[    0.291956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.292007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.292124] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20180105/dsfield-213)
>[    0.292204] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20180105/psparse-550)
>[    0.292285] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
>[    0.292478] PCI host bridge to bus 0000:00
>[    0.292529] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.292602] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
>[    0.292675] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
>[    0.292747] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
>[    0.292820] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
>[    0.292893] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.292944] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.293004] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.293064] pci 0000:00:00.0: [8086:4003] type 00 class 0x060000
>[    0.293113] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>[    0.293207] pci 0000:00:01.0: [8086:4021] type 01 class 0x060400
>[    0.293250] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.293342] pci 0000:00:03.0: [8086:4023] type 01 class 0x060400
>[    0.293384] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>[    0.293463] pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
>[    0.293504] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>[    0.293589] pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
>[    0.293631] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>[    0.293711] pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
>[    0.293791] pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
>[    0.293870] pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
>[    0.293951] pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
>[    0.294044] pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
>[    0.294128] pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
>[    0.294211] pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
>[    0.294291] pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
>[    0.294375] pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
>[    0.294453] pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
>[    0.294546] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
>[    0.294578] pci 0000:00:1c.0: enabling Extended Tags
>[    0.294666] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.294752] pci 0000:00:1c.1: [8086:2692] type 01 class 0x060400
>[    0.294785] pci 0000:00:1c.1: enabling Extended Tags
>[    0.294872] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.294962] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
>[    0.295005] pci 0000:00:1d.0: reg 0x20: [io  0x3000-0x301f]
>[    0.295098] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
>[    0.295136] pci 0000:00:1d.1: reg 0x20: [io  0x3020-0x303f]
>[    0.295231] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
>[    0.295269] pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
>[    0.295359] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
>[    0.295397] pci 0000:00:1d.3: reg 0x20: [io  0x3060-0x307f]
>[    0.295496] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
>[    0.295515] pci 0000:00:1d.7: reg 0x10: [mem 0xf0604000-0xf06043ff]
>[    0.295585] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.295662] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.295777] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
>[    0.295925] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
>[    0.295940] pci 0000:00:1f.1: reg 0x10: [io  0x30d0-0x30d7]
>[    0.295947] pci 0000:00:1f.1: reg 0x14: [io  0x30f0-0x30f3]
>[    0.295955] pci 0000:00:1f.1: reg 0x18: [io  0x30d8-0x30df]
>[    0.295963] pci 0000:00:1f.1: reg 0x1c: [io  0x30f4-0x30f7]
>[    0.295971] pci 0000:00:1f.1: reg 0x20: [io  0x30c0-0x30cf]
>[    0.295987] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    0.296003] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    0.296054] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    0.296106] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    0.296233] pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
>[    0.296248] pci 0000:00:1f.2: reg 0x10: [io  0x30e0-0x30e7]
>[    0.296255] pci 0000:00:1f.2: reg 0x14: [io  0x30f8-0x30fb]
>[    0.296262] pci 0000:00:1f.2: reg 0x18: [io  0x30e8-0x30ef]
>[    0.296268] pci 0000:00:1f.2: reg 0x1c: [io  0x30fc-0x30ff]
>[    0.296274] pci 0000:00:1f.2: reg 0x20: [io  0x3080-0x309f]
>[    0.296281] pci 0000:00:1f.2: reg 0x24: [mem 0xf0604400-0xf06047ff]
>[    0.296310] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.296428] pci 0000:00:01.0: PCI bridge to [bus 80]
>[    0.296539] pci 0000:a0:00.0: [1912:0014] type 00 class 0x0c0330
>[    0.296575] pci 0000:a0:00.0: reg 0x10: [mem 0xf0700000-0xf0701fff 64bit]
>[    0.296709] pci 0000:a0:00.0: PME# supported from D0 D3hot D3cold
>[    0.299023] pci 0000:00:03.0: PCI bridge to [bus a0]
>[    0.299084] pci 0000:00:03.0:   bridge window [mem 0xf0700000-0xf07fffff]
>[    0.299132] pci 0000:60:00.0: [1002:6888] type 00 class 0x030000
>[    0.299149] pci 0000:60:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.299159] pci 0000:60:00.0: reg 0x18: [mem 0xf0000000-0xf001ffff 64bit]
>[    0.299165] pci 0000:60:00.0: reg 0x20: [io  0x1000-0x10ff]
>[    0.299175] pci 0000:60:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[    0.299181] pci 0000:60:00.0: enabling Extended Tags
>[    0.299261] pci 0000:60:00.0: supports D1 D2
>[    0.299323] pci 0000:60:00.1: [1002:aa50] type 00 class 0x040300
>[    0.299341] pci 0000:60:00.1: reg 0x10: [mem 0xf0020000-0xf0023fff 64bit]
>[    0.299369] pci 0000:60:00.1: enabling Extended Tags
>[    0.299450] pci 0000:60:00.1: supports D1 D2
>[    0.302014] pci 0000:00:05.0: PCI bridge to [bus 60]
>[    0.302069] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]
>[    0.302072] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff]
>[    0.302076] pci 0000:00:05.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.302352] pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
>[    0.304229] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
>[    0.304916] pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
>[    0.306733] pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
>[    0.307275] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.307505] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>[    0.307556] pci 0000:00:09.0:   bridge window [io  0x2000-0x2fff]
>[    0.307558] pci 0000:00:09.0:   bridge window [mem 0xf0100000-0xf02fffff]
>[    0.308320] pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
>[    0.310276] pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
>[    0.310687] pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.311003] pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
>[    0.312917] pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
>[    0.313366] pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.314137] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>[    0.314962] pci 0000:1e:00.0: PCI bridge to [bus 20]
>[    0.315819] pci 0000:1e:01.0: PCI bridge to [bus 40]
>[    0.317688] pci 0000:11:06.0: [1000:0054] type 00 class 0x010000
>[    0.318549] pci 0000:11:06.0: reg 0x10: [io  0x2000-0x20ff]
>[    0.319046] pci 0000:11:06.0: reg 0x14: [mem 0xf0110000-0xf0113fff 64bit]
>[    0.319549] pci 0000:11:06.0: reg 0x1c: [mem 0xf0100000-0xf010ffff 64bit]
>[    0.320183] pci 0000:11:06.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
>[    0.321870] pci 0000:11:06.0: supports D1 D2
>[    0.322550] pci 0000:11:09.0: [12b9:1008] type 00 class 0x070002
>[    0.323275] pci 0000:11:09.0: reg 0x10: [io  0x2400-0x2407]
>[    0.326137] pci 0000:11:09.0: supports D2
>[    0.326138] pci 0000:11:09.0: PME# supported from D0 D2 D3hot D3cold
>[    0.327366] pci 0000:10:00.3: PCI bridge to [bus 11]
>[    0.327458] pci 0000:10:00.3:   bridge window [io  0x2000-0x2fff]
>[    0.327503] pci 0000:10:00.3:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.327927] pci 0000:0e:00.0: [14e4:167b] type 00 class 0x020000
>[    0.328003] pci 0000:0e:00.0: reg 0x10: [mem 0xf0400000-0xf040ffff 64bit]
>[    0.328059] pci 0000:0e:00.0: enabling Extended Tags
>[    0.328189] pci 0000:0e:00.0: PME# supported from D3hot D3cold
>[    0.331022] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>[    0.331084] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.331146] pci 0000:0f:00.0: [14e4:167b] type 00 class 0x020000
>[    0.331180] pci 0000:0f:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
>[    0.331237] pci 0000:0f:00.0: enabling Extended Tags
>[    0.331366] pci 0000:0f:00.0: PME# supported from D3hot D3cold
>[    0.334021] pci 0000:00:1c.1: PCI bridge to [bus 0f]
>[    0.334083] pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
>[    0.334142] pci 0000:01:04.0: [1814:0601] type 00 class 0x028000
>[    0.334161] pci 0000:01:04.0: reg 0x10: [mem 0xf0500000-0xf050ffff]
>[    0.334281] pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
>[    0.334300] pci 0000:01:05.0: reg 0x10: [mem 0xf0514000-0xf05147ff]
>[    0.334309] pci 0000:01:05.0: reg 0x14: [mem 0xf0510000-0xf0513fff]
>[    0.334374] pci 0000:01:05.0: supports D1 D2
>[    0.334375] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
>[    0.334448] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>[    0.334503] pci 0000:00:1e.0:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.334507] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.334509] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
>[    0.334510] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
>[    0.334511] pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode)
>[    0.334513] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
>[    0.334514] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.334515] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.334539] pci_bus 0000:00: on NUMA node 0
>[    0.334939] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
>[    0.335045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>[    0.335144] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
>[    0.335242] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
>[    0.335341] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>[    0.335466] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
>[    0.335564] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
>[    0.335662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>[    0.335905] pci 0000:60:00.0: vgaarb: setting as boot VGA device
>[    0.335905] pci 0000:60:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.336007] pci 0000:60:00.0: vgaarb: bridge control possible
>[    0.336064] vgaarb: loaded
>[    0.336239] SCSI subsystem initialized
>[    0.336314] libata version 3.00 loaded.
>[    0.336314] ACPI: bus type USB registered
>[    0.336314] usbcore: registered new interface driver usbfs
>[    0.336314] usbcore: registered new interface driver hub
>[    0.336333] usbcore: registered new device driver usb
>[    0.336423] pps_core: LinuxPPS API ver. 1 registered
>[    0.336478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.337001] PTP clock support registered
>[    0.337045] EDAC MC: Ver: 3.0.0
>[    0.337702] Advanced Linux Sound Architecture Driver Initialized.
>[    0.338016] PCI: Using ACPI for IRQ routing
>[    0.375891] PCI: pci_cache_line_size set to 64 bytes
>[    0.376249] e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
>[    0.376250] e820: reserve RAM buffer [mem 0xcffc2840-0xcfffffff]
>[    0.376398] NetLabel: Initializing
>[    0.376448] NetLabel:  domain hash size = 128
>[    0.376497] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.376564] NetLabel:  unlabeled traffic allowed by default
>[    0.376633] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.376633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.376633] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.379048] clocksource: Switched to clocksource tsc-early
>[    0.398567] VFS: Disk quotas dquot_6.6.0
>[    0.398647] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.401651] pnp: PnP ACPI init
>[    0.401863] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.401904] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
>[    0.401933] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.402096] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
>[    0.402147] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (disabled)
>[    0.402183] pnp 00:05: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
>[    0.402287] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.402344] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.402425] system 00:07: [io  0x0400-0x041f] has been reserved
>[    0.402476] system 00:07: [io  0x0420-0x043f] has been reserved
>[    0.402527] system 00:07: [io  0x0440-0x045f] has been reserved
>[    0.402578] system 00:07: [io  0x0460-0x047f] has been reserved
>[    0.402628] system 00:07: [io  0x0480-0x048f] has been reserved
>[    0.402678] system 00:07: [io  0x0490-0x049f] has been reserved
>[    0.402729] system 00:07: [io  0xf800-0xf81f] has been reserved
>[    0.402781] system 00:07: [io  0xf820-0xf83f] has been reserved
>[    0.402837] system 00:07: [io  0xf840-0xf85f] has been reserved
>[    0.402892] system 00:07: [io  0xf860-0xf87f] has been reserved
>[    0.402942] system 00:07: [io  0xfa00-0xfa3f] has been reserved
>[    0.402993] system 00:07: [io  0xfc00-0xfc7f] has been reserved
>[    0.403043] system 00:07: [io  0xfc80-0xfcff] has been reserved
>[    0.403094] system 00:07: [io  0xfe00-0xfe7f] has been reserved
>[    0.403144] system 00:07: [io  0xfe80-0xfeff] has been reserved
>[    0.403199] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.403251] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.403303] system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
>[    0.403354] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.403405] system 00:08: [mem 0xfe700000-0xfe7003ff] has been reserved
>[    0.403456] system 00:08: [mem 0xfe600000-0xfe6fffff] has been reserved
>[    0.403507] system 00:08: [mem 0xfe000000-0xfe01ffff] has been reserved
>[    0.403562] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.403710] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref]
>[    0.403789] pnp 00:09: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref]
>[    0.403871] pnp 00:09: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref]
>[    0.403948] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref]
>[    0.404025] pnp 00:09: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref]
>[    0.404122] system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved
>[    0.404179] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.404243] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.404300] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.404308] pnp: PnP ACPI: found 11 devices
>[    0.408894] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.409515] pci 0000:00:01.0: PCI bridge to [bus 80]
>[    0.409571] pci 0000:00:03.0: PCI bridge to [bus a0]
>[    0.409622] pci 0000:00:03.0:   bridge window [mem 0xf0700000-0xf07fffff]
>[    0.409679] pci 0000:60:00.0: BAR 6: assigned [mem 0xf0040000-0xf005ffff pref]
>[    0.409753] pci 0000:00:05.0: PCI bridge to [bus 60]
>[    0.409803] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]
>[    0.409855] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff]
>[    0.409910] pci 0000:00:05.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.409985] pci 0000:1e:00.0: PCI bridge to [bus 20]
>[    0.410265] pci 0000:1e:01.0: PCI bridge to [bus 40]
>[    0.410539] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>[    0.410816] pci 0000:11:06.0: BAR 6: no space for [mem size 0x00200000 pref]
>[    0.410871] pci 0000:11:06.0: BAR 6: failed to assign [mem size 0x00200000 pref]
>[    0.410944] pci 0000:10:00.3: PCI bridge to [bus 11]
>[    0.410997] pci 0000:10:00.3:   bridge window [io  0x2000-0x2fff]
>[    0.411135] pci 0000:10:00.3:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.411812] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>[    0.411865] pci 0000:00:09.0:   bridge window [io  0x2000-0x2fff]
>[    0.411917] pci 0000:00:09.0:   bridge window [mem 0xf0100000-0xf02fffff]
>[    0.411971] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>[    0.412023] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.412079] pci 0000:00:1c.1: PCI bridge to [bus 0f]
>[    0.412131] pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
>[    0.412187] pci 0000:00:1e.0: PCI bridge to [bus 01]
>[    0.412238] pci 0000:00:1e.0:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.412295] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
>[    0.412297] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xdfffffff window]
>[    0.412298] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff window]
>[    0.412299] pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff window]
>[    0.412300] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
>[    0.412302] pci_bus 0000:00: resource 9 [io  0x0000-0x0cf7 window]
>[    0.412303] pci_bus 0000:00: resource 10 [io  0x0d00-0xffff window]
>[    0.412305] pci_bus 0000:a0: resource 1 [mem 0xf0700000-0xf07fffff]
>[    0.412306] pci_bus 0000:60: resource 0 [io  0x1000-0x1fff]
>[    0.412307] pci_bus 0000:60: resource 1 [mem 0xf0000000-0xf00fffff]
>[    0.412308] pci_bus 0000:60: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.412310] pci_bus 0000:10: resource 0 [io  0x2000-0x2fff]
>[    0.412311] pci_bus 0000:10: resource 1 [mem 0xf0100000-0xf02fffff]
>[    0.412312] pci_bus 0000:11: resource 0 [io  0x2000-0x2fff]
>[    0.412313] pci_bus 0000:11: resource 1 [mem 0xf0100000-0xf01fffff]
>[    0.412315] pci_bus 0000:0e: resource 1 [mem 0xf0400000-0xf04fffff]
>[    0.412316] pci_bus 0000:0f: resource 1 [mem 0xf0300000-0xf03fffff]
>[    0.412318] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
>[    0.412319] pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff window]
>[    0.412320] pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff window]
>[    0.412321] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff window]
>[    0.412323] pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff window]
>[    0.412324] pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff window]
>[    0.412325] pci_bus 0000:01: resource 9 [io  0x0000-0x0cf7 window]
>[    0.412326] pci_bus 0000:01: resource 10 [io  0x0d00-0xffff window]
>[    0.412386] NET: Registered protocol family 2
>[    0.412590] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.412789] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.413723] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.414196] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.414326] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>[    0.414591] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
>[    0.414940] NET: Registered protocol family 1
>[    0.415195] RPC: Registered named UNIX socket transport module.
>[    0.415250] RPC: Registered udp transport module.
>[    0.415306] RPC: Registered tcp transport module.
>[    0.415355] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.416864] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
>[    0.417154] pci 0000:60:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.417472] PCI: CLS 64 bytes, default 64
>[    0.417528] Unpacking initramfs...
>[    0.458577] Freeing initrd memory: 2028K
>[    0.458731] DMAR: No ATSR found
>[    0.458909] DMAR: dmar3: Using Register based invalidation
>[    0.458979] DMAR: dmar2: Using Register based invalidation
>[    0.459033] DMAR: dmar1: Using Register based invalidation
>[    0.459088] DMAR: dmar0: Using Register based invalidation
>[    0.459142] DMAR: dmar4: Using Register based invalidation
>[    0.459210] DMAR: Setting RMRR:
>[    0.459382] DMAR: Setting identity map for device 0000:00:1d.3 [0xcffd6000 - 0xcffd6fff]
>[    0.459631] DMAR: Setting identity map for device 0000:00:1d.2 [0xcffd5000 - 0xcffd5fff]
>[    0.459834] DMAR: Setting identity map for device 0000:00:1d.1 [0xcffd4000 - 0xcffd4fff]
>[    0.460056] DMAR: Setting identity map for device 0000:00:1d.0 [0xcffd3000 - 0xcffd3fff]
>[    0.460139] DMAR: Prepare 0-16MiB unity mapping for LPC
>[    0.460315] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
>[    0.460590] DMAR: Intel(R) Virtualization Technology for Directed I/O
>[    0.460824] iommu: Adding device 0000:00:00.0 to group 0
>[    0.460911] iommu: Adding device 0000:00:01.0 to group 1
>[    0.460981] iommu: Adding device 0000:00:03.0 to group 2
>[    0.461055] iommu: Adding device 0000:00:05.0 to group 3
>[    0.461125] iommu: Adding device 0000:00:09.0 to group 4
>[    0.461244] iommu: Adding device 0000:00:10.0 to group 5
>[    0.461313] iommu: Adding device 0000:00:10.1 to group 5
>[    0.461382] iommu: Adding device 0000:00:10.2 to group 5
>[    0.461450] iommu: Adding device 0000:00:10.3 to group 5
>[    0.461523] iommu: Adding device 0000:00:10.4 to group 5
>[    0.461593] iommu: Adding device 0000:00:11.0 to group 6
>[    0.461681] iommu: Adding device 0000:00:15.0 to group 7
>[    0.461760] iommu: Adding device 0000:00:15.1 to group 7
>[    0.461850] iommu: Adding device 0000:00:16.0 to group 8
>[    0.461925] iommu: Adding device 0000:00:16.1 to group 8
>[    0.462028] iommu: Adding device 0000:00:1c.0 to group 9
>[    0.462102] iommu: Adding device 0000:00:1c.1 to group 9
>[    0.462220] iommu: Adding device 0000:00:1d.0 to group 10
>[    0.462291] iommu: Adding device 0000:00:1d.1 to group 10
>[    0.462362] iommu: Adding device 0000:00:1d.2 to group 10
>[    0.462438] iommu: Adding device 0000:00:1d.3 to group 10
>[    0.462509] iommu: Adding device 0000:00:1d.7 to group 10
>[    0.462579] iommu: Adding device 0000:00:1e.0 to group 11
>[    0.462677] iommu: Adding device 0000:00:1f.0 to group 12
>[    0.462846] iommu: Adding device 0000:00:1f.1 to group 12
>[    0.462920] iommu: Adding device 0000:00:1f.2 to group 12
>[    0.462994] iommu: Adding device 0000:a0:00.0 to group 2
>[    0.463052] iommu: Adding device 0000:60:00.0 to group 3
>[    0.463110] iommu: Adding device 0000:60:00.1 to group 3
>[    0.463169] iommu: Adding device 0000:10:00.0 to group 4
>[    0.463227] iommu: Adding device 0000:10:00.3 to group 4
>[    0.463285] iommu: Adding device 0000:1e:00.0 to group 4
>[    0.463376] iommu: Adding device 0000:1e:01.0 to group 4
>[    0.463438] iommu: Adding device 0000:11:06.0 to group 4
>[    0.463495] iommu: Adding device 0000:11:09.0 to group 4
>[    0.463555] iommu: Adding device 0000:0e:00.0 to group 9
>[    0.463615] iommu: Adding device 0000:0f:00.0 to group 9
>[    0.463672] iommu: Adding device 0000:01:04.0 to group 11
>[    0.463729] iommu: Adding device 0000:01:05.0 to group 11
>[    0.468098] Scanning for low memory corruption every 60 seconds
>[    0.469033] Initialise system trusted keyrings
>[    0.469144] workingset: timestamp_bits=46 max_order=23 bucket_order=0
>[    0.473208] NFS: Registering the id_resolver key type
>[    0.473267] Key type id_resolver registered
>[    0.473319] Key type id_legacy registered
>[    0.473425] SGI XFS with ACLs, security attributes, realtime, no debug enabled
>[    0.474198] SELinux:  Registering netfilter hooks
>[    0.475700] async_tx: api initialized (async)
>[    0.475759] Key type asymmetric registered
>[    0.475811] Asymmetric key parser 'x509' registered
>[    0.475882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.476021] io scheduler noop registered
>[    0.476073] io scheduler deadline registered (default)
>[    0.476203] io scheduler cfq registered
>[    0.476256] io scheduler mq-deadline registered (default)
>[    0.476309] io scheduler kyber registered
>[    0.476369] io scheduler bfq registered
>[    0.482461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.503100] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.525587] 0000:11:09.0: ttyS1 at I/O 0x2400 (irq = 34, base_baud = 115200) is a 16550A
>[    0.526031] Non-volatile memory driver v1.3
>[    0.526124] Linux agpgart interface v0.103
>[    0.526273] intel_idle: does not run on family 6 model 23
>[    0.526384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.526494] ACPI: Power Button [PBTN]
>[    0.526603] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.526689] ACPI: Power Button [PWRF]
>[    0.531276] loop: module loaded
>[    0.531502] ahci 0000:00:1f.2: version 3.0
>[    0.531826] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>[    0.531906] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
>[    0.533099] scsi host0: ahci
>[    0.533424] scsi host1: ahci
>[    0.533683] scsi host2: ahci
>[    0.533960] scsi host3: ahci
>[    0.534242] scsi host4: ahci
>[    0.534492] scsi host5: ahci
>[    0.534674] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 19
>[    0.534759] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 19
>[    0.534835] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 19
>[    0.534912] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 19
>[    0.534997] ata5: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604700 irq 19
>[    0.535073] ata6: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604780 irq 19
>[    0.535222] ata_piix 0000:00:1f.1: version 2.13
>[    0.535999] scsi host6: ata_piix
>[    0.536200] scsi host7: ata_piix
>[    0.536310] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
>[    0.536369] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
>[    0.536557] tun: Universal TUN/TAP device driver, 1.6
>[    0.536585] ata8: port disabled--ignoring
>[    0.536691] tg3.c:v3.137 (May 11, 2014)
>[    0.624164] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC
>[    0.624245] tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>[    0.624323] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    0.624400] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[    0.713108] tg3 0000:0f:00.0 eth1: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC
>[    0.713196] tg3 0000:0f:00.0 eth1: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>[    0.713274] tg3 0000:0f:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    0.713351] tg3 0000:0f:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
>[    0.713585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.713651] ehci-pci: EHCI PCI platform driver
>[    0.713934] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    0.714061] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    0.714148] ehci-pci 0000:00:1d.7: debug port 1
>[    0.718248] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    0.718267] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf0604000
>[    0.725711] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.725841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.725896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.725972] usb usb1: Product: EHCI Host Controller
>[    0.726034] usb usb1: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj ehci_hcd
>[    0.726088] usb usb1: SerialNumber: 0000:00:1d.7
>[    0.726294] hub 1-0:1.0: USB hub found
>[    0.726356] hub 1-0:1.0: 8 ports detected
>[    0.726658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.726736] ohci-pci: OHCI PCI platform driver
>[    0.726808] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.727067] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.727716] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.727815] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
>[    0.727928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.727983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.728068] usb usb2: Product: UHCI Host Controller
>[    0.728120] usb usb2: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj uhci_hcd
>[    0.728174] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.728351] hub 2-0:1.0: USB hub found
>[    0.728411] hub 2-0:1.0: 2 ports detected
>[    0.728764] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.728873] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    0.728972] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
>[    0.729094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.729149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.729225] usb usb3: Product: UHCI Host Controller
>[    0.729277] usb usb3: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj uhci_hcd
>[    0.729331] usb usb3: SerialNumber: 0000:00:1d.1
>[    0.729510] hub 3-0:1.0: USB hub found
>[    0.729569] hub 3-0:1.0: 2 ports detected
>[    0.729945] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.730077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    0.730183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
>[    0.730293] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.730348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.730424] usb usb4: Product: UHCI Host Controller
>[    0.730476] usb usb4: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj uhci_hcd
>[    0.730530] usb usb4: SerialNumber: 0000:00:1d.2
>[    0.730712] hub 4-0:1.0: USB hub found
>[    0.730771] hub 4-0:1.0: 2 ports detected
>[    0.731131] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    0.731246] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    0.731358] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
>[    0.731470] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.731524] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.731600] usb usb5: Product: UHCI Host Controller
>[    0.731652] usb usb5: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj uhci_hcd
>[    0.731712] usb usb5: SerialNumber: 0000:00:1d.3
>[    0.731888] hub 5-0:1.0: USB hub found
>[    0.731948] hub 5-0:1.0: 2 ports detected
>[    0.732168] xhci_hcd 0000:a0:00.0: Resetting
>[    0.844946] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.845888] ata1.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
>[    0.845949] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    0.846020] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.846091] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.846709] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.846793] ata6: SATA link down (SStatus 0 SControl 300)
>[    0.846872] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.847067] ata3.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
>[    0.847122] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    0.847193] ata5.00: ATA-8: ST31000528AS, CC49, max UDMA/133
>[    0.847248] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[    0.848084] ata3.00: configured for UDMA/133
>[    0.848546] ata5.00: configured for UDMA/133
>[    0.850117] ata2.00: ATAPI: HL-DT-ST DVD-RAM GSA-H60L, R90A, max UDMA/100
>[    0.854633] ata2.00: configured for UDMA/100
>[    0.861546] ata4.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
>[    0.861601] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    0.864850] ata1.00: configured for UDMA/133
>[    0.865169] scsi 0:0:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
>[    0.865462] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.865471] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    0.865611] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    0.865675] sd 0:0:0:0: [sda] Write Protect is off
>[    0.865735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.865751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.875284] ata4.00: configured for UDMA/133
>[    0.896446]  sda: sda1 sda2 < sda5 > sda3
>[    0.897003] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.966117] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H60L R90A PQ: 0 ANSI: 5
>[    1.051015] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.113213] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.113291] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.113683] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.113778] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.114110] scsi 2:0:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
>[    1.114390] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    1.114449] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    1.114479] sd 2:0:0:0: [sdb] 4096-byte physical blocks
>[    1.114596] sd 2:0:0:0: [sdb] Write Protect is off
>[    1.114651] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    1.114667] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.114780] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
>[    1.115048] sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
>[    1.115079] sd 3:0:0:0: Attached scsi generic sg3 type 0
>[    1.115137] sd 3:0:0:0: [sdc] Write Protect is off
>[    1.115237] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    1.115251] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.115477] scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC49 PQ: 0 ANSI: 5
>[    1.115721] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    1.115757] sd 4:0:0:0: Attached scsi generic sg4 type 0
>[    1.115815] sd 4:0:0:0: [sdd] Write Protect is off
>[    1.115913] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    1.115929] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.118430]  sdc: sdc1 sdc2 sdc3
>[    1.118902] sd 3:0:0:0: [sdc] Attached SCSI disk
>[    1.136059]  sdd: sdd1
>[    1.136437] sd 4:0:0:0: [sdd] Attached SCSI disk
>[    1.138577]  sdb: sdb1 sdb2 < sdb5 > sdb3
>[    1.139189] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    1.180471] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
>[    1.180526] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    1.180580] usb 1-1: Product: USB2.0 Hub
>[    1.181009] hub 1-1:1.0: USB hub found
>[    1.181345] hub 1-1:1.0: 4 ports detected
>[    1.490011] usb 3-1: new full-speed USB device number 2 using uhci_hcd
>[    1.504014] tsc: Refined TSC clocksource calibration: 3000.106 MHz
>[    1.504079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3ea998311, max_idle_ns: 440795342554 ns
>[    1.504198] clocksource: Switched to clocksource tsc
>[    1.665026] usb 3-1: New USB device found, idVendor=0764, idProduct=0501
>[    1.665083] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    1.665138] usb 3-1: Product: CP1500AVRLCDa
>[    1.665189] usb 3-1: Manufacturer: CPS
>[    1.665240] usb 3-1: SerialNumber: CTHFU2003734
>[    1.760169] xhci_hcd 0000:a0:00.0: xHCI Host Controller
>[    1.760287] xhci_hcd 0000:a0:00.0: new USB bus registered, assigned bus number 6
>[    1.870714] xhci_hcd 0000:a0:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000410
>[    1.871114] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.871170] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.871246] usb usb6: Product: xHCI Host Controller
>[    1.871298] usb usb6: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj xhci-hcd
>[    1.871352] usb usb6: SerialNumber: 0000:a0:00.0
>[    1.871538] hub 6-0:1.0: USB hub found
>[    1.871604] hub 6-0:1.0: 4 ports detected
>[    1.871863] xhci_hcd 0000:a0:00.0: xHCI Host Controller
>[    1.871963] xhci_hcd 0000:a0:00.0: new USB bus registered, assigned bus number 7
>[    1.874144] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
>[    1.874247] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.874301] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.874377] usb usb7: Product: xHCI Host Controller
>[    1.874429] usb usb7: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj xhci-hcd
>[    1.874483] usb usb7: SerialNumber: 0000:a0:00.0
>[    1.874680] hub 7-0:1.0: USB hub found
>[    1.874745] hub 7-0:1.0: 4 ports detected
>[    1.875053] usbcore: registered new interface driver usblp
>[    1.875167] usbcore: registered new interface driver usb-storage
>[    1.875293] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>[    1.877975] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.878080] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.878256] mousedev: PS/2 mouse device common for all mice
>[    1.878577] rtc_cmos 00:00: RTC can wake from S4
>[    1.878772] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    1.878850] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.878954] i2c /dev entries driver
>[    1.879366] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    1.879564] device-mapper: raid: Loading target version 1.13.2
>[    1.879655] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.886839] hid-generic 0003:0764:0501.0001: hiddev96,hidraw0: USB HID v1.10 Device [CPS CP1500AVRLCDa] on usb-0000:00:1d.1-1/input0
>[    1.886956] usbcore: registered new interface driver usbhid
>[    1.887020] usbhid: USB HID core driver
>[    1.887805] u32 classifier
>[    1.887858]     Actions configured
>[    1.888794] IPVS: Registered protocols (TCP, UDP)
>[    1.888866] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
>[    1.889038] IPVS: ipvs loaded.
>[    1.889089] IPVS: [rr] scheduler registered.
>[    1.889316] Initializing XFRM netlink socket
>[    1.889608] NET: Registered protocol family 10
>[    1.890929] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:05.0/0000:60:00.1/sound/card0/input3
>[    1.891651] Segment Routing with IPv6
>[    1.891859] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>[    1.892150] NET: Registered protocol family 17
>[    1.892234] Key type dns_resolver registered
>[    1.892898] microcode: sig=0x10676, pf=0x40, revision=0x60f
>[    1.893069] microcode: Microcode Update Driver: v2.2.
>[    1.893085] sched_clock: Marking stable (1893057434, 0)->(2032147880, -139090446)
>[    1.893501] registered taskstats version 1
>[    1.893553] Loading compiled-in X.509 certificates
>[    1.893694] zswap: default zpool zbud not available
>[    1.893748] zswap: pool creation failed
>[    1.896044]   Magic number: 14:924:85
>[    1.896277] console [netcon0] enabled
>[    1.896328] netconsole: network logging started
>[    1.899816] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    1.900407] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    1.900462] ALSA device list:
>[    1.900510]   #0: HDA ATI HDMI at 0xf0020000 irq 44
>[    1.902069] Freeing unused kernel memory: 1200K
>[    1.902119] Write protecting the kernel read-only data: 18432k
>[    1.903071] Freeing unused kernel memory: 2004K
>[    1.905111] Freeing unused kernel memory: 920K
>[    1.905232] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[    1.905311] cfg80211: failed to load regulatory.db
>[    1.913024] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    2.136015] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
>[    2.194016] usb 6-1: new high-speed USB device number 2 using xhci_hcd
>[    2.216460] usb 1-1.1: New USB device found, idVendor=25a7, idProduct=2402
>[    2.216463] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.216465] usb 1-1.1: Product: DXT MOUSE
>[    2.216466] usb 1-1.1: Manufacturer: DXT
>[    2.218204] input: DXT DXT MOUSE as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:25A7:2402.0002/input/input6
>[    2.270254] hid-generic 0003:25A7:2402.0002: input,hidraw1: USB HID v1.01 Keyboard [DXT DXT MOUSE] on usb-0000:00:1d.7-1.1/input0
>[    2.273956] input: DXT DXT MOUSE as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/0003:25A7:2402.0003/input/input7
>[    2.323010] usb 6-1: New USB device found, idVendor=0424, idProduct=2137
>[    2.323012] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.323014] usb 6-1: Product: USB2137B
>[    2.323016] usb 6-1: Manufacturer: SMSC
>[    2.324165] hub 6-1:1.0: USB hub found
>[    2.324502] hub 6-1:1.0: 7 ports detected
>[    2.325198] hid-generic 0003:25A7:2402.0003: input,hiddev97,hidraw2: USB HID v1.01 Mouse [DXT DXT MOUSE] on usb-0000:00:1d.7-1.1/input1
>[    2.435521] usb 7-1: new SuperSpeed USB device number 2 using xhci_hcd
>[    2.450340] usb 7-1: New USB device found, idVendor=0424, idProduct=5537
>[    2.450343] usb 7-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[    2.450344] usb 7-1: Product: USB5537B
>[    2.450346] usb 7-1: Manufacturer: SMSC
>[    2.451620] hub 7-1:1.0: USB hub found
>[    2.451965] hub 7-1:1.0: 7 ports detected
>[    2.514010] usb 5-1: new full-speed USB device number 2 using uhci_hcd
>[    2.562010] usb 6-3: new low-speed USB device number 3 using xhci_hcd
>[    2.690621] mdadm (1387) used greatest stack depth: 13632 bytes left
>[    2.767941] usb 6-3: New USB device found, idVendor=046d, idProduct=c219
>[    2.767944] usb 6-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>[    2.767946] usb 6-3: Product: Logitech Cordless RumblePad 2
>[    2.767947] usb 6-3: Manufacturer: Logitech
>[    2.786016] usb 6-1.3: new high-speed USB device number 4 using xhci_hcd
>[    2.812264] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-3/6-3:1.0/0003:046D:C219.0004/input/input8
>[    2.812325] logitech 0003:046D:C219.0004: input,hidraw3: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:a0:00.0-3/input0
>[    2.812329] logitech: probe of 0003:046D:C219.0004 failed with error -1
>[    2.894708] usb 6-1.3: New USB device found, idVendor=045e, idProduct=0779
>[    2.894710] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.894712] usb 6-1.3: Product: MicrosoftÂ® LifeCam HD-3000
>[    2.894714] usb 6-1.3: Manufacturer: Microsoft
>[    2.895037] usb 5-1: New USB device found, idVendor=0a5c, idProduct=21e8
>[    2.895040] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.895042] usb 5-1: Product: BCM920702 Bluetooth 4.0
>[    2.895043] usb 5-1: Manufacturer: Broadcom Corp
>[    2.895045] usb 5-1: SerialNumber: 0002723E8CE8
>[    2.990013] usb 6-4: new low-speed USB device number 5 using xhci_hcd
>[    3.099599] md: md128 stopped.
>[    3.101961] md/raid1:md128: active with 2 out of 2 mirrors
>[    3.157415] md128: detected capacity change from 0 to 1000193458176
>[    3.200811] usb 6-4: New USB device found, idVendor=046d, idProduct=c219
>[    3.200814] usb 6-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>[    3.200816] usb 6-4: Product: Logitech Cordless RumblePad 2
>[    3.200817] usb 6-4: Manufacturer: Logitech
>[    3.215017] usb 6-1.5: new full-speed USB device number 6 using xhci_hcd
>[    3.219014] usb 1-8: new high-speed USB device number 6 using ehci-pci
>[    3.245141] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-4/6-4:1.0/0003:046D:C219.0005/input/input9
>[    3.245199] logitech 0003:046D:C219.0005: input,hidraw4: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:a0:00.0-4/input0
>[    3.245203] logitech: probe of 0003:046D:C219.0005 failed with error -1
>[    3.320832] usb 6-1.5: New USB device found, idVendor=04d8, idProduct=0b2a
>[    3.320834] usb 6-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.320836] usb 6-1.5: Product: U2717D_0B2A_15091601
>[    3.320838] usb 6-1.5: Manufacturer: Microchip Technology Inc.
>[    3.326862] hid-generic 0003:04D8:0B2A.0006: hiddev98,hidraw5: USB HID v1.11 Device [Microchip Technology Inc. U2717D_0B2A_15091601] on usb-0000:a0:00.0-1.5/input0
>[    3.349591] usb 1-8: config 1 interface 3 altsetting 0 bulk endpoint 0x7 has invalid maxpacket 8
>[    3.349593] usb 1-8: config 1 interface 3 altsetting 0 bulk endpoint 0x87 has invalid maxpacket 8
>[    3.350459] usb 1-8: New USB device found, idVendor=0763, idProduct=2080
>[    3.350461] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.350463] usb 1-8: Product: Fast Track Ultra
>[    3.350465] usb 1-8: Manufacturer: M-Audio
>[    3.560038] md: md127 stopped.
>[    3.564526] md/raid1:md127: active with 2 out of 2 mirrors
>[    3.619956] md127: detected capacity change from 0 to 999813767168
>[    3.624229] mdadm (1424) used greatest stack depth: 13424 bytes left
>[    3.644424]  sdc: sdc1 sdc2 sdc3
>[    3.646351]  sdd: sdd1
>[    4.141334] busybox (1540) used greatest stack depth: 13376 bytes left
>[    4.145861] busybox (1542) used greatest stack depth: 13352 bytes left
>[    4.621969] XFS (sdc3): Mounting V4 Filesystem
>[    4.647503] XFS (sdc3): Ending clean mount
>[    4.648604] busybox (1570) used greatest stack depth: 12960 bytes left
>[    4.747048] init-early.sh (1591) used greatest stack depth: 12696 bytes left
>[    6.901283] udevd[2266]: starting version 3.2.2
>[    6.957914] udevd (2266) used greatest stack depth: 12568 bytes left
>[    6.958399] udevd[2267]: starting eudev-3.2.2
>[    7.054811] i5k_amb i5k_amb.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    7.076921] [drm] radeon kernel modesetting enabled.
>[    7.080487] Fusion MPT base driver 3.04.20
>[    7.080496] Copyright (c) 1999-2008 LSI Corporation
>[    7.080961] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6888 0x1002:0x030C 0x00).
>[    7.081122] ATOM BIOS: CYPRESS
>[    7.081209] radeon 0000:60:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
>[    7.081212] radeon 0000:60:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
>[    7.081216] [drm] Detected VRAM RAM=2048M, BAR=256M
>[    7.081217] [drm] RAM width 256bits DDR
>[    7.082335] [TTM] Zone  kernel: Available graphics memory: 16478374 kiB
>[    7.082336] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    7.082338] [TTM] Initializing pool allocator
>[    7.082344] [TTM] Initializing DMA pool allocator
>[    7.082394] [drm] radeon: 2048M of VRAM memory ready
>[    7.082396] [drm] radeon: 1024M of GTT memory ready.
>[    7.082417] [drm] Loading CYPRESS Microcode
>[    7.082423] [drm] Internal thermal controller with fan control
>[    7.087293] Fusion MPT SAS Host driver 3.04.20
>[    7.089657] mptbase: ioc0: Initiating bringup
>[    7.101725] [drm] radeon: dpm initialized
>[    7.101949] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    7.103751] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[    7.107507] input: PC Speaker as /devices/platform/pcspkr/input/input10
>[    7.127876] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
>[    7.128037] radeon 0000:60:00.0: WB enabled
>[    7.128041] radeon 0000:60:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000c6d317f8
>[    7.128044] radeon 0000:60:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000002ce0b5d7
>[    7.128538] radeon 0000:60:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000e3d9d7b8
>[    7.128542] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    7.128543] [drm] Driver supports precise vblank timestamp query.
>[    7.128545] radeon 0000:60:00.0: radeon: MSI limited to 32-bit
>[    7.128631] radeon 0000:60:00.0: radeon: using MSI.
>[    7.128662] [drm] radeon: irq initialized.
>[    7.141085] firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    7.142225] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
>[    7.145383] [drm] ring test on 0 succeeded in 1 usecs
>[    7.145391] [drm] ring test on 3 succeeded in 2 usecs
>[    7.156531] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0002 detected
>[    7.160740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    7.202033] Linux video capture interface: v2.00
>[    7.227249] Bluetooth: Core ver 2.22
>[    7.227275] NET: Registered protocol family 31
>[    7.227276] Bluetooth: HCI device and connection manager initialized
>[    7.227283] Bluetooth: HCI socket layer initialized
>[    7.227286] Bluetooth: L2CAP socket layer initialized
>[    7.227295] Bluetooth: SCO socket layer initialized
>[    7.233310] usbcore: registered new interface driver btusb
>[    7.318017] ioc0: LSISAS1068 B1: Capabilities={Initiator}
>[    7.322528] [drm] ring test on 5 succeeded in 1 usecs
>[    7.322534] [drm] UVD initialized successfully.
>[    7.322825] [drm] ib test on ring 0 succeeded in 0 usecs
>[    7.322857] [drm] ib test on ring 3 succeeded in 0 usecs
>[    7.341910] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>[    7.344451] usbcore: registered new interface driver snd-usb-audio
>[    7.348432] input: MicrosoftÂ® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input11
>[    7.348693] usbcore: registered new interface driver uvcvideo
>[    7.348694] USB Video Class driver (1.1.1)
>[    7.356042] Bluetooth: hci0: BCM: chip id 63
>[    7.358054] Bluetooth: hci0: BCM: features 0x07
>[    7.390068] Bluetooth: hci0: xw8600
>[    7.392058] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0896
>[    7.648131] firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000020f40b, S400
>[    7.976036] [drm] ib test on ring 5 succeeded
>[    7.977364] [drm] Radeon Display Connectors
>[    7.977366] [drm] Connector 0:
>[    7.977367] [drm]   DP-1
>[    7.977368] [drm]   HPD3
>[    7.977370] [drm]   DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
>[    7.977371] [drm]   Encoders:
>[    7.977372] [drm]     DFP1: INTERNAL_UNIPHY2
>[    7.977373] [drm] Connector 1:
>[    7.977374] [drm]   DP-2
>[    7.977375] [drm]   HPD4
>[    7.977376] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
>[    7.977377] [drm]   Encoders:
>[    7.977377] [drm]     DFP2: INTERNAL_UNIPHY2
>[    7.977378] [drm] Connector 2:
>[    7.977379] [drm]   DP-3
>[    7.977380] [drm]   HPD1
>[    7.977381] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[    7.977382] [drm]   Encoders:
>[    7.977382] [drm]     DFP3: INTERNAL_UNIPHY1
>[    7.977383] [drm] Connector 3:
>[    7.977384] [drm]   DP-4
>[    7.977384] [drm]   HPD2
>[    7.977386] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    7.977387] [drm]   Encoders:
>[    7.977387] [drm]     DFP4: INTERNAL_UNIPHY1
>[    8.053075] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
>[    8.128964] [drm] fb mappable at 0xD034D000
>[    8.128965] [drm] vram apper at 0xD0000000
>[    8.128966] [drm] size 14745600
>[    8.128967] [drm] fb depth is 24
>[    8.128968] [drm]    pitch is 10240
>[    8.129065] fbcon: radeondrmfb (fb0) is primary device
>[    8.194051] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0896
>[    8.205828] Console: switching to colour frame buffer device 256x67
>[    8.210092] radeon 0000:60:00.0: fb0: radeondrmfb frame buffer device
>[    8.216081] [drm] Initialized radeon 2.50.0 20080528 for 0000:60:00.0 on minor 0
>[    8.225044] Bluetooth: hci0: Broadcom Bluetooth Device
>[   19.572268] scsi host8: ioc0: LSISAS1068 B1, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=45
>[   19.621180] openrc (1590) used greatest stack depth: 12328 bytes left
>[   19.914050] fuse init (API version 7.26)
>[   19.938201] VFIO - User Level meta-driver version: 0.3
>[   22.014812] Adding 2097148k swap on /dev/sdc2.  Priority:-2 extents:1 across:2097148k SSFS
>[   22.122854] XFS (sdd1): Mounting V5 Filesystem
>[   22.263412] XFS (sdd1): Ending clean mount
>[   22.326803] XFS (dm-0): Mounting V4 Filesystem
>[   22.597900] XFS (dm-0): Ending clean mount
>[   23.106645] dmesg (3269) used greatest stack depth: 12088 bytes left
>[   25.576901] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   25.622139] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   25.627443] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
>[   25.673121] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
>[   25.681147] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   27.215699] tg3 0000:0e:00.0 eth0: Link is up at 100 Mbps, full duplex
>[   27.215703] tg3 0000:0e:00.0 eth0: Flow control is on for TX and on for RX
>[   27.215724] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   27.476813] TCP: request_sock_TCP: Possible SYN flooding on port 34751. Sending cookies.  Check SNMP counters.
>[   29.022971] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
>[   29.023866] Bridge firewalling registered
>[   29.787691] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
>[   34.110707] virbr0: port 1(virbr0-nic) entered blocking state
>[   34.110712] virbr0: port 1(virbr0-nic) entered disabled state
>[   34.110822] device virbr0-nic entered promiscuous mode
>[   34.154976] virbr0: port 1(virbr0-nic) entered blocking state
>[   34.154980] virbr0: port 1(virbr0-nic) entered listening state
>[   34.283955] virbr0: port 1(virbr0-nic) entered disabled state
>[   34.334741] xhci_hcd 0000:a0:00.0: remove, state 4
>[   34.334754] usb usb7: USB disconnect, device number 1
>[   34.334756] usb 7-1: USB disconnect, device number 2
>[   34.335312] xhci_hcd 0000:a0:00.0: USB bus 7 deregistered
>[   34.335375] xhci_hcd 0000:a0:00.0: remove, state 1
>[   34.335383] usb usb6: USB disconnect, device number 1
>[   34.335386] usb 6-1: USB disconnect, device number 2
>[   34.335388] usb 6-1.3: USB disconnect, device number 4
>[   34.336272] usb 6-1.5: USB disconnect, device number 6
>[   34.340826] usb 6-3: USB disconnect, device number 3
>[   34.341151] usb 6-4: USB disconnect, device number 5
>[   34.464913] xhci_hcd 0000:a0:00.0: USB bus 6 deregistered
>[   34.465057] xhci_hcd 0000:a0:00.0: dma_pool_destroy buffer-128, 000000005353c693 busy
>[   34.475303] TCP: request_sock_TCP: Possible SYN flooding on port 51015. Sending cookies.  Check SNMP counters.
>[   34.499107] xhci_hcd 0000:a0:00.0: Resetting
>[   35.552239] xhci_hcd 0000:a0:00.0: xHCI Host Controller
>[   35.552383] xhci_hcd 0000:a0:00.0: new USB bus registered, assigned bus number 6
>[   35.662591] xhci_hcd 0000:a0:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000410
>[   35.662917] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>[   35.662919] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   35.662921] usb usb6: Product: xHCI Host Controller
>[   35.662922] usb usb6: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj xhci-hcd
>[   35.662923] usb usb6: SerialNumber: 0000:a0:00.0
>[   35.663081] hub 6-0:1.0: USB hub found
>[   35.663093] hub 6-0:1.0: 4 ports detected
>[   35.663302] xhci_hcd 0000:a0:00.0: xHCI Host Controller
>[   35.664099] xhci_hcd 0000:a0:00.0: new USB bus registered, assigned bus number 7
>[   35.666168] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
>[   35.666189] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
>[   35.666190] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   35.666192] usb usb7: Product: xHCI Host Controller
>[   35.666193] usb usb7: Manufacturer: Linux 4.16.3-gentoo-xw8600-fj xhci-hcd
>[   35.666194] usb usb7: SerialNumber: 0000:a0:00.0
>[   35.666366] hub 7-0:1.0: USB hub found
>[   35.666383] hub 7-0:1.0: 4 ports detected
>[   35.987542] usb 7-1: new SuperSpeed USB device number 2 using xhci_hcd
>[   36.002317] usb 7-1: New USB device found, idVendor=0424, idProduct=5537
>[   36.002321] usb 7-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[   36.002323] usb 7-1: Product: USB5537B
>[   36.002326] usb 7-1: Manufacturer: SMSC
>[   36.003736] hub 7-1:1.0: USB hub found
>[   36.004062] hub 7-1:1.0: 7 ports detected
>[   36.115021] usb 6-1: new high-speed USB device number 2 using xhci_hcd
>[   36.244992] usb 6-1: New USB device found, idVendor=0424, idProduct=2137
>[   36.244995] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   36.244998] usb 6-1: Product: USB2137B
>[   36.245008] usb 6-1: Manufacturer: SMSC
>[   36.246784] hub 6-1:1.0: USB hub found
>[   36.247115] hub 6-1:1.0: 7 ports detected
>[   36.366012] usb 6-3: new low-speed USB device number 3 using xhci_hcd
>[   36.569970] usb 6-3: New USB device found, idVendor=046d, idProduct=c219
>[   36.569974] usb 6-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>[   36.569977] usb 6-3: Product: Logitech Cordless RumblePad 2
>[   36.569979] usb 6-3: Manufacturer: Logitech
>[   36.589035] usb 6-1.3: new high-speed USB device number 4 using xhci_hcd
>[   36.614559] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-3/6-3:1.0/0003:046D:C219.0007/input/input12
>[   36.666171] logitech 0003:046D:C219.0007: input,hidraw5: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:a0:00.0-3/input0
>[   36.666187] logitech: probe of 0003:046D:C219.0007 failed with error -1
>[   36.698732] usb 6-1.3: New USB device found, idVendor=045e, idProduct=0779
>[   36.698736] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   36.698739] usb 6-1.3: Product: MicrosoftÂ® LifeCam HD-3000
>[   36.698741] usb 6-1.3: Manufacturer: Microsoft
>[   36.702617] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>[   36.708683] input: MicrosoftÂ® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input13
>[   36.794023] usb 6-4: new low-speed USB device number 5 using xhci_hcd
>[   37.004836] usb 6-4: New USB device found, idVendor=046d, idProduct=c219
>[   37.004840] usb 6-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>[   37.004842] usb 6-4: Product: Logitech Cordless RumblePad 2
>[   37.004843] usb 6-4: Manufacturer: Logitech
>[   37.019013] usb 6-1.5: new full-speed USB device number 6 using xhci_hcd
>[   37.049385] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-4/6-4:1.0/0003:046D:C219.0008/input/input14
>[   37.102214] logitech 0003:046D:C219.0008: input,hidraw6: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:a0:00.0-4/input0
>[   37.102228] logitech: probe of 0003:046D:C219.0008 failed with error -1
>[   37.126858] usb 6-1.5: New USB device found, idVendor=04d8, idProduct=0b2a
>[   37.126861] usb 6-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   37.126863] usb 6-1.5: Product: U2717D_0B2A_15091601
>[   37.126865] usb 6-1.5: Manufacturer: Microchip Technology Inc.
>[   37.133073] hid-generic 0003:04D8:0B2A.0009: hiddev98,hidraw7: USB HID v1.11 Device [Microchip Technology Inc. U2717D_0B2A_15091601] on usb-0000:a0:00.0-1.5/input0
>[   54.308174] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage
>[   54.308197] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
>[   55.333577] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage
>[   55.333593] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
>[   64.887557] random: crng init done
>[  720.984029] Bluetooth: RFCOMM TTY layer initialized
>[  720.984041] Bluetooth: RFCOMM socket layer initialized
>[  720.984052] Bluetooth: RFCOMM ver 1.11
>[  827.049332] pool (9943) used greatest stack depth: 12032 bytes left
>[  872.774043] usb 6-1: USB disconnect, device number 2
>[  872.774048] usb 6-1.3: USB disconnect, device number 4
>[  872.776723] usb 6-1.5: USB disconnect, device number 6
>[  872.812849] TCP: request_sock_TCP: Possible SYN flooding on port 46205. Sending cookies.  Check SNMP counters.
>[  872.960015] usb 7-1: USB disconnect, device number 2
>[  874.783068] perf: interrupt took too long (3147 > 3142), lowering kernel.perf_event_max_sample_rate to 63000
>[ 1274.579875] perf: interrupt took too long (3938 > 3933), lowering kernel.perf_event_max_sample_rate to 50000
>[ 1330.154487] usb 7-1: new SuperSpeed USB device number 3 using xhci_hcd
>[ 1330.169302] usb 7-1: New USB device found, idVendor=0424, idProduct=5537
>[ 1330.169304] usb 7-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[ 1330.169306] usb 7-1: Product: USB5537B
>[ 1330.169308] usb 7-1: Manufacturer: SMSC
>[ 1330.170724] hub 7-1:1.0: USB hub found
>[ 1330.171052] hub 7-1:1.0: 7 ports detected
>[ 1330.213130] TCP: request_sock_TCP: Possible SYN flooding on port 60773. Sending cookies.  Check SNMP counters.
>[ 1330.348953] usb 6-1: new high-speed USB device number 7 using xhci_hcd
>[ 1330.479958] usb 6-1: New USB device found, idVendor=0424, idProduct=2137
>[ 1330.479961] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1330.479962] usb 6-1: Product: USB2137B
>[ 1330.479963] usb 6-1: Manufacturer: SMSC
>[ 1330.481744] hub 6-1:1.0: USB hub found
>[ 1330.482083] hub 6-1:1.0: 7 ports detected
>[ 1330.771954] usb 6-1.3: new high-speed USB device number 8 using xhci_hcd
>[ 1330.880718] usb 6-1.3: New USB device found, idVendor=045e, idProduct=0779
>[ 1330.880720] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1330.880722] usb 6-1.3: Product: MicrosoftÂ® LifeCam HD-3000
>[ 1330.880723] usb 6-1.3: Manufacturer: Microsoft
>[ 1330.884606] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>[ 1330.890924] input: MicrosoftÂ® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input15
>[ 1331.107952] usb 6-1.5: new full-speed USB device number 9 using xhci_hcd
>[ 1331.213739] usb 6-1.5: New USB device found, idVendor=04d8, idProduct=0b2a
>[ 1331.213741] usb 6-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1331.213742] usb 6-1.5: Product: U2717D_0B2A_15091601
>[ 1331.213744] usb 6-1.5: Manufacturer: Microchip Technology Inc.
>[ 1331.219894] hid-generic 0003:04D8:0B2A.000A: hiddev98,hidraw7: USB HID v1.11 Device [Microchip Technology Inc. U2717D_0B2A_15091601] on usb-0000:a0:00.0-1.5/input0
>[ 1348.295301] usb 6-1: USB disconnect, device number 7
>[ 1348.295306] usb 6-1.3: USB disconnect, device number 8
>[ 1348.297544] usb 6-1.5: USB disconnect, device number 9
>[ 1348.330004] TCP: request_sock_TCP: Possible SYN flooding on port 34825. Sending cookies.  Check SNMP counters.
>[ 1348.479975] usb 7-1: USB disconnect, device number 3
>[ 1606.210456] usb 7-1: new SuperSpeed USB device number 4 using xhci_hcd
>[ 1606.225335] usb 7-1: New USB device found, idVendor=0424, idProduct=5537
>[ 1606.225338] usb 7-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[ 1606.225340] usb 7-1: Product: USB5537B
>[ 1606.225342] usb 7-1: Manufacturer: SMSC
>[ 1606.226766] hub 7-1:1.0: USB hub found
>[ 1606.227086] hub 7-1:1.0: 7 ports detected
>[ 1606.273492] TCP: request_sock_TCP: Possible SYN flooding on port 54405. Sending cookies.  Check SNMP counters.
>[ 1606.407947] usb 6-1: new high-speed USB device number 10 using xhci_hcd
>[ 1606.538867] usb 6-1: New USB device found, idVendor=0424, idProduct=2137
>[ 1606.538870] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1606.538872] usb 6-1: Product: USB2137B
>[ 1606.538874] usb 6-1: Manufacturer: SMSC
>[ 1606.540666] hub 6-1:1.0: USB hub found
>[ 1606.540993] hub 6-1:1.0: 7 ports detected
>[ 1606.827947] usb 6-1.3: new high-speed USB device number 11 using xhci_hcd
>[ 1606.936630] usb 6-1.3: New USB device found, idVendor=045e, idProduct=0779
>[ 1606.936635] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1606.936637] usb 6-1.3: Product: MicrosoftÂ® LifeCam HD-3000
>[ 1606.936639] usb 6-1.3: Manufacturer: Microsoft
>[ 1606.940511] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>[ 1606.946545] input: MicrosoftÂ® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input16
>[ 1607.163951] usb 6-1.5: new full-speed USB device number 12 using xhci_hcd
>[ 1607.270649] usb 6-1.5: New USB device found, idVendor=04d8, idProduct=0b2a
>[ 1607.270652] usb 6-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1607.270654] usb 6-1.5: Product: U2717D_0B2A_15091601
>[ 1607.270656] usb 6-1.5: Manufacturer: Microchip Technology Inc.
>[ 1607.276911] hid-generic 0003:04D8:0B2A.000B: hiddev98,hidraw7: USB HID v1.11 Device [Microchip Technology Inc. U2717D_0B2A_15091601] on usb-0000:a0:00.0-1.5/input0
>[ 1664.425005] kworker/dying (5) used greatest stack depth: 10848 bytes left
>[ 2537.689263] perf: interrupt took too long (4924 > 4922), lowering kernel.perf_event_max_sample_rate to 40000
>[ 2719.489119] usb 6-1: USB disconnect, device number 10
>[ 2719.489123] usb 6-1.3: USB disconnect, device number 11
>[ 2719.493332] usb 6-1.5: USB disconnect, device number 12
>[ 2719.528661] TCP: request_sock_TCP: Possible SYN flooding on port 47685. Sending cookies.  Check SNMP counters.
>[ 2719.663922] usb 7-1: USB disconnect, device number 4
>[ 4003.226347] usb 7-1: new SuperSpeed USB device number 5 using xhci_hcd
>[ 4003.241178] usb 7-1: New USB device found, idVendor=0424, idProduct=5537
>[ 4003.241180] usb 7-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[ 4003.241182] usb 7-1: Product: USB5537B
>[ 4003.241184] usb 7-1: Manufacturer: SMSC
>[ 4003.242607] hub 7-1:1.0: USB hub found
>[ 4003.242928] hub 7-1:1.0: 7 ports detected
>[ 4003.288814] TCP: request_sock_TCP: Possible SYN flooding on port 37321. Sending cookies.  Check SNMP counters.
>[ 4003.422831] usb 6-1: new high-speed USB device number 13 using xhci_hcd
>[ 4003.553840] usb 6-1: New USB device found, idVendor=0424, idProduct=2137
>[ 4003.553845] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 4003.553847] usb 6-1: Product: USB2137B
>[ 4003.553849] usb 6-1: Manufacturer: SMSC
>[ 4003.555635] hub 6-1:1.0: USB hub found
>[ 4003.555959] hub 6-1:1.0: 7 ports detected
>[ 4003.844838] usb 6-1.3: new high-speed USB device number 14 using xhci_hcd
>[ 4003.954597] usb 6-1.3: New USB device found, idVendor=045e, idProduct=0779
>[ 4003.954600] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 4003.954602] usb 6-1.3: Product: MicrosoftÂ® LifeCam HD-3000
>[ 4003.954603] usb 6-1.3: Manufacturer: Microsoft
>[ 4003.958597] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>[ 4003.964913] input: MicrosoftÂ® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:03.0/0000:a0:00.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input17
>[ 4004.182837] usb 6-1.5: new full-speed USB device number 15 using xhci_hcd
>[ 4004.288867] usb 6-1.5: New USB device found, idVendor=04d8, idProduct=0b2a
>[ 4004.288869] usb 6-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 4004.288871] usb 6-1.5: Product: U2717D_0B2A_15091601
>[ 4004.288873] usb 6-1.5: Manufacturer: Microchip Technology Inc.
>[ 4004.295167] hid-generic 0003:04D8:0B2A.000C: hiddev98,hidraw7: USB HID v1.11 Device [Microchip Technology Inc. U2717D_0B2A_15091601] on usb-0000:a0:00.0-1.5/input0
>[ 4022.321530] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage
>[ 4022.321544] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
>[ 4022.333475] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage
>[ 4022.333496] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed

Actions: View

Attachments on bug 106191: 139004 | 139005 | 139006 | 139007 | 139014 | 139017 | 139082 | 139083

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.