Attachment 11872 Details for Bug 12656 – My old (FC5) xorg.conf that supported single head and TV out.

My old (FC5) xorg.conf that supported single head and TV out.

xorg.conf.lcd-and-tv (text/plain), 14.98 KB, created by Michael J. Hammel on 2007-10-02 22:25:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael J. Hammel

Created: 2007-10-02 22:25:57 UTC

Size: 14.98 KB

patch

obsolete

># X.org server configuration - Hand Tuned by Michael J. Hammel
># **********************************************************************
># ServerLayout Sections
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
># To add the drawing tablets to any server layout:
>	# Drawing tablet: Aiptek
>	# InputDevice    "astylus"	"AlwaysCore"
>	# InputDevice    "acursor"	"AlwaysCore"
>	# InputDevice    "aeraser"	"AlwaysCore"
>	# Drawing tablet: Wacom
>	# InputDevice    "wstylus"	"AlwaysCore"
>	# InputDevice    "wcursor"	"AlwaysCore"
>	# InputDevice    "weraser"	"AlwaysCore"
># NOTE:  The first ServerLayout definition gets used - is there some way to
># dynamically switch between them, perhaps with GDM?
># The LFP and the CRT at the same time, but as one giant desktop.
># This works with MythTV - just go into Setup->Appearance and set the
># Xinerama screen to 1 (instead of 0).  That will put the MythTV on the
># CRT.  However, if you change workspaces on the LCD then the CRT changes with
># you.
># The default server layout where we just have the 1 LCD screen.
># The LFP and the TV at the same time.
># The LFP and the CRT at the same time but with different desktops.
># This doesn't seem to work real well because the panels under GNOME
># keep crashing if I try to edit them on the CRT (re: the second desktop).
># **********************************************************************
># Files
># **********************************************************************
># Server Extensions
># Composite is not available on older X releases.
># Render might not work either, but is more common.
># **********************************************************************
># Input Devices
># **********************************************************************
># Synaptics Input Device 
># **********************************************************************
># Aiptek Drawing Tablet
># **********************************************************************
># Wacom Drawing Tablet
># **********************************************************************
># Monitors
># Valid monitors are CRT, LFP, DFP, TV, CRT2, LFP2, DFP2, TV2 and NONE.
># **********************************************************************
># Devices - re: video cards
># There is only one, but we can use it to drive the following types of
># Monitors: CRT, LFP, DFP, TV, CRT2, LFP2, DFP2, TV2 and NONE.
># 
># This puts the same video out on both the LCD and VGA port
>#	Option "MonitorLayout" "LFP+CRT,NONE"
>#	Option "DevicePresence" "true"
># This should get the LCD and S-Video TV out sync'd and clone it to the
># the VGA output.  But the LCD probably needs to be reset to 1024x768 for this 
># to work right.
>#	Option "MonitorLayout" "LFP+TV,CRT"
>#	Option "MonitorLayout" "CRT,LFP+TV"
>#	Option "Clone" "true"
>#	Option "DevicePresence" "true"
># Only one of the following two options should be used.
># Enable the desktop to span both displays
>#	Option "Xinerama" "true"
># Cause the display to be identical on both screens
>#	Option "Clone" "true"
># This give thes the LCD and CRT different outputs, which allows me to set
># them up as Xinerama configurations with different screen sizes, etc.
>#	Option "MonitorLayout" "LFP,CRT"
>#	Option "DevicePresence" "true"
># Also see:
># http://www.internet-milano.it/antonio/cdc6034dw/xorg.conf.txt
># http://filebox.vt.edu/users/jlido/linux/xorg.conf.fancy
># http://lists.debian.org/debian-laptop/2005/09/msg00008.html
># man i810
># google: i810 monitorlayout
># X.org R6.9 or R7.0 has real i915 support included: see
># 	http://www.linux-laptop.net/hosted/fs215e-slackware.html
># This is the default configuration
># One video pipe for each of the LFP (ie LCD) and the CRT 
># One video pipe for each of the LFP (ie LCD) and the TV output 
># **********************************************************************
># Screens - These let us put different screens on different output devices.
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
># This is the default screen when we're just using the LCD display.
># **********************************************************************
>
># Two displays:  LCD and TV
>Section "ServerLayout"
>	Identifier     "LFPandTV"
>	Screen      0  "LFP with TV" 0 0
>	Screen      1  "TV Screen" RightOf "LFP with TV"
>	InputDevice    "Mouse0" "CorePointer"
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	Option	    "Xinerama" "true"
>	Option	    "Clone" "off"
>EndSection
>
># Single display - the LCD
>Section "ServerLayout"
>	Identifier     "Default Layout"
>	Screen      0  "LFP Screen" 0 0
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	InputDevice    "Synaptics" "CorePointer"
>	InputDevice    "Mouse0" "AlwaysCore"
>EndSection
>
># Two displays:  LCD and VGA @ 1024x768
>Section "ServerLayout"
>	Identifier     "BigDesktop"
>	Screen      0  "LFP with CRT" 0 0
>	Screen      1  "CRT Screen" RightOf "LFP with CRT"
>	InputDevice    "Mouse0" "CorePointer"
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	Option	    "Xinerama" "true"
>	Option	    "Clone" "on"
>EndSection
>
># Doesn't work w/GNOME: LCD and VGA but using two different desktops.
>Section "ServerLayout"
>	Identifier     "LFPandCRT"
>	Screen      0  "LFP with CRT" 0 0
>	Screen      1  "CRT Screen" RightOf "LFP with CRT"
>	InputDevice    "Mouse0" "CorePointer"
>	InputDevice    "Keyboard0" "CoreKeyboard"
>EndSection
># XFree86 4 configuration created by pyxf86config
>
>Section "ServerLayout"
>	Identifier     "Orig Default Layout"
>	Screen      0  "Screen0" 0 0
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	InputDevice    "Synaptics" "CorePointer"
>	InputDevice    "Mouse0" "AlwaysCore"
>EndSection
>
>Section "Files"
>
># RgbPath is the location of the RGB database.  Note, this is the name of the 
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, a font server independent of the X server is
># used to render fonts.
>
>	FontPath     "unix/:7100"
>EndSection
>
>Section "Module"
>	Load  "dbe"
>	Load  "extmod"
>	Load  "fbdevhw"
>	Load  "glx"
>	Load  "record"
>	Load  "freetype"
>	Load  "type1"
>	Load  "synaptics"
>	Load  "dri"
>EndSection
>
>
># **********************************************************************
># INPUT DEVICES
># **********************************************************************
>
>Section "InputDevice"
>
># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>#	Option	"Xleds"		"1 2 3"
># To disable the XKEYBOARD extension, uncomment XkbDisable.
>#	Option	"XkbDisable"
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#	Option	"XkbModel"	"pc102"
># If you have a US Microsoft Natural keyboard, you can use:
>#	Option	"XkbModel"	"microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#	Option	"XkbLayout"	"de"
># or:
>#	Option	"XkbLayout"	"de"
>#	Option	"XkbVariant"	"nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#	Option	"XkbOptions"	"ctrl:swapcaps"
># Or if you just want both to be control, use:
>#	Option	"XkbOptions"	"ctrl:nocaps"
>#
>	Identifier  "Keyboard0"
>	Driver      "kbd"
>	Option	    "XkbModel" "pc105"
>	Option	    "XkbLayout" "us"
>EndSection
>
># -------------------------------------
># USB Mouse
>
>Section "InputDevice"
>	Identifier  "Mouse0"
>	Driver      "mouse"
>	Option	    "Protocol" "IMPS/2"
>	Option	    "Device" "/dev/input/mice"
>	Option	    "ZAxisMapping" "4 5"
>	Option	    "Emulate3Buttons" "yes"
>EndSection
>
># -------------------------------------
># Synaptics mouse pad
>
>Section "InputDevice"
>	Identifier  "Synaptics"
>	Driver      "synaptics"
>	Option	    "Device" "/dev/input/mice"
>	Option	    "Protocol" "auto-dev"
>	Option	    "Emulate3Buttons" "yes"
>	Option	    "SHMConfig" "on"
>	Option	    "FingerHigh" "255"
>EndSection
>
># -------------------------------------
># Aiptek drawing tablet
>
>Section "InputDevice"
>	Identifier  "astylus"
>	Driver      "aiptek"
>	Option	    "Device" "/dev/input/aiptekTablet"
>	Option	    "Type" "stylus"
>	Option	    "Mode" "absolute"
>	Option	    "PressCurve" "0,5,95,100"
>	Option	    "KeepShape" "on"
>	Option	    "zMin" "0"
>	Option	    "zMax" "512"
>	Option	    "USB" "on"
>	Option	    "Cursor" "stylus"
>	Option	    "debuglevel" "0"
>EndSection
>
>Section "InputDevice"
>	Identifier  "acursor"
>	Driver      "aiptek"
>	Option	    "Device" "/dev/input/aiptekTablet"
>	Option	    "Type" "cursor"
>	Option	    "Mode" "absolute"
>	Option	    "PressCurve" "0,5,95,100"
>	Option	    "KeepShape" "on"
>	Option	    "zMin" "0"
>	Option	    "zMax" "512"
>	Option	    "USB" "on"
>	Option	    "Cursor" "puck"
>	Option	    "debuglevel" "0"
>EndSection
>
>Section "InputDevice"
>	Identifier  "aeraser"
>	Driver      "aiptek"
>	Option	    "Device" "/dev/input/aiptekTablet"
>	Option	    "Type" "eraser"
>	Option	    "Mode" "absolute"
>	Option	    "PressCurve" "0,5,95,100"
>	Option	    "KeepShape" "on"
>	Option	    "zMin" "0"
>	Option	    "zMax" "512"
>	Option	    "USB" "on"
>	Option	    "Cursor" "stylus"
>	Option	    "debuglevel" "0"
>EndSection
>
>
># -------------------------------------
># Wacom Drawing Tablet
>
>Section "InputDevice"
>	Identifier  "wstylus"
>	Driver      "wacom"
>	Option	    "Device" "/dev/input/wacom"   # USB ONLY
>	Option	    "Type" "stylus"
>	Option	    "USB" "on"                  # USB ONLY
>	Option	    "BottomX" "2540"
>	Option	    "BottomY" "2540"
>	Option	    "AlwaysCore" "on"
>	Option	    "Tilt" "on"
>	Option	    "KeepShape" "on"
>EndSection
>
>Section "InputDevice"
>	Identifier  "weraser"
>	Driver      "wacom"
>	Option	    "Device" "/dev/input/wacom"   # USB ONLY
>	Option	    "Type" "eraser"
>	Option	    "USB" "on"                  # USB ONLY
>	Option	    "BottomX" "2540"
>	Option	    "BottomY" "2540"
>	Option	    "AlwaysCore" "on"
>	Option	    "Tilt" "on"
>	Option	    "KeepShape" "on"
>EndSection
>
>Section "InputDevice"
>	Identifier  "wcursor"
>	Driver      "wacom"
>	Option	    "Device" "/dev/input/wacom"   # USB ONLY
>	Option	    "Type" "cursor"
>	Option	    "USB" "on"                  # USB ONLY
>	Option	    "BottomX" "2540"
>	Option	    "BottomY" "2540"
>	Option	    "AlwaysCore" "on"
>	Option	    "Tilt" "on"
>	Option	    "KeepShape" "on"
>EndSection
>
>
># **********************************************************************
># MONITORS
># **********************************************************************
>
># -------------------------------------
># Generic LCD Monitor setting
>
>Section "Monitor"
> ### Comment all HorizSync and VertSync values to use DDC:
>	Identifier   "Monitor0"
>	VendorName   "Monitor Vendor"
>	ModelName    "LCD Panel 1280x800"
> ### Comment all HorizSync and VertSync values to use DDC:
>	HorizSync    31.5 - 90.0
>	VertRefresh  60.0 - 60.0
>	Option	    "dpms"
>EndSection
>
># -------------------------------------
># Acer Aspire LCD Monitor setting
>
>Section "Monitor"
>	Identifier   "Acer Aspire LFP"
>	VendorName   "Acer"
>	ModelName    "LCD Panel 1280x800"
>	HorizSync    31.5 - 90.0
>	VertRefresh  60.0 - 60.0
>	ModeLine     "1280x800_70.00" 98.9 1280 1352 1488 1696 800 801 804 833 -hsync +vsync
>	Option	    "dpms"
>EndSection
>
># -------------------------------------
># TV Out
>
>Section "Monitor"
>	Identifier   "Television"
>	HorizSync    30.0 - 50.0
>	VertRefresh  59.9 - 59.9
>EndSection
>
># -------------------------------------
># CRT Out
>
>Section "Monitor"
>	Identifier   "CRT"
>#	HorizSync	30-95
>#	VertRefresh	50-100
>	Option	    "DPMS"
>EndSection
>
>
># **********************************************************************
># VIDEO DEVICES
># These define the video hardware configuration when using one 
># or more video monitors.
># **********************************************************************
>
>Section "Device"
>	Identifier  "Videocard0"
>	Driver      "i810"
>	VendorName  "Videocard vendor"
>	BoardName   "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
>EndSection
>
>Section "Device"
>	Identifier  "AcerLFP"
>	Driver      "i810"
>	VendorName  "Intel"
>	BoardName   "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
>EndSection
>
>Section "Device"
>	Identifier  "i915B"
>	Driver      "i810"
>	Option	    "MonitorLayout" "CRT,LFP"
>	BusID       "PCI:0:2:0"
>EndSection
>
>Section "Device"
>	Identifier  "i915A"
>	Driver      "i810"
>	Option	    "MonitorLayout" "CRT,LFP"
>	Option	    "DevicePresence" "true"
>	BusID       "PCI:0:2:0"
>	Screen      1
>EndSection
>
>Section "Device"
>	Identifier  "i810 TV-B"
>	Driver      "i810"
>	Option	    "MonitorLayout" "TV,LFP"
>	Option	    "DevicePresence" "true"
>	BusID       "PCI:0:2:0"
>EndSection
>
>Section "Device"
>	Identifier  "i810 TV-A"
>	Driver      "i810"
>	Option	    "MonitorLayout" "TV,LFP"
>	Option	    "DevicePresence" "true"
>	BusID       "PCI:0:2:0"
>	Screen      1
>EndSection
>
>
># **********************************************************************
># SCREENS
># These define the logical layout for the window manager to deal with.
># **********************************************************************
>
>Section "Screen"
>	Identifier "Screen0"
>	Device     "Videocard0"
>	Monitor    "Monitor0"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     16
>		Modes    "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes    "1280x800"
>	EndSubSection
>EndSection
>
>Section "Screen"
>	Identifier "LFP Screen"
>	Device     "AcerLFP"
>	Monitor    "Acer Aspire LFP"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     16
>		Modes    "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes    "1280x800" "1024x768" "800x600" "640x480"
>	EndSubSection
>EndSection
>
>Section "Screen"
>	Identifier "LFP with TV"
>	Device     "i810 TV-B"
>	Monitor    "Acer Aspire LFP"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes    "1280x800" "1024x768" "800x600" "640x480"
>	EndSubSection
>EndSection
>
>Section "Screen"
>	Identifier "LFP with CRT"
>	Device     "i915B"
>	Monitor    "Acer Aspire LFP"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		# Modes    "1280x800" "1024x768" "800x600" "640x480"
>		Modes    "1024x768" 
>	EndSubSection
>EndSection
>
>Section "Screen"
>	Identifier "TV Screen"
>	Device     "i810 TV-A"
>	Monitor    "Television"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes    "1024x768" "800x600" "640x480"
>	EndSubSection
>EndSection
>
>Section "Screen"
>	Identifier "CRT Screen"
>	Device     "i915A"
>	Monitor    "CRT"
>	DefaultDepth     24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes    "1024x768"
>	EndSubSection
>EndSection
>
>
># **********************************************************************
># EXTENSIONS
># **********************************************************************
>
>Section "DRI"
>	Group        0
>	Mode         0666
>EndSection
>
>Section "Extensions"
>   #Option  "Composite" "enable"
>	Option	"RENDER" "enable"
>EndSection
>

Actions: View

Attachments on bug 12656: 11872 | 11873

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.