Attachment 11501 Details for Bug 12389 – kernel's log

kernel's log

messages (text/plain), 13.68 KB, created by he jiang on 2007-09-11 02:05:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: he jiang

Created: 2007-09-11 02:05:32 UTC

Size: 13.68 KB

patch

obsolete

>Sep 11 15:25:16 x-945g kernel: hw state dump end
>Sep 11 15:25:16 x-945g kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>Sep 11 15:25:16 x-945g kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Sep 11 15:25:16 x-945g kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Sep 11 15:25:16 x-945g kernel: floppy0: no floppy controllers found
>Sep 11 15:25:16 x-945g kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Sep 11 15:25:16 x-945g kernel: loop: loaded (max 8 devices)
>Sep 11 15:25:16 x-945g kernel: Attansic L1 Ethernet Network Driver - version 2.0.7
>Sep 11 15:25:16 x-945g kernel: Copyright(c) 2005-2006 Attansic Corporation.
>Sep 11 15:25:16 x-945g kernel: tg3.c:v3.75 (March 23, 2007)
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>Sep 11 15:25:16 x-945g kernel: eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:0d:8c:47
>Sep 11 15:25:16 x-945g kernel: eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[1] TSOcap[1]
>Sep 11 15:25:16 x-945g kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Sep 11 15:25:16 x-945g kernel: Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
>Sep 11 15:25:16 x-945g kernel: netconsole: not configured, aborting
>Sep 11 15:25:16 x-945g kernel: input: Macintosh mouse button emulation as /class/input/input2
>Sep 11 15:25:16 x-945g kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Sep 11 15:25:16 x-945g kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Sep 11 15:25:16 x-945g kernel: ICH7: IDE controller at PCI slot 0000:00:1f.1
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>Sep 11 15:25:16 x-945g kernel: ICH7: chipset revision 1
>Sep 11 15:25:16 x-945g kernel: ICH7: not 100% native mode: will probe irqs later
>Sep 11 15:25:16 x-945g kernel:     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Sep 11 15:25:16 x-945g kernel: hda: TSSTcorpDVD-ROM TS-H352C, ATAPI CD/DVD-ROM drive
>Sep 11 15:25:16 x-945g kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Sep 11 15:25:16 x-945g kernel: hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Sep 11 15:25:16 x-945g kernel: Uniform CD-ROM driver Revision: 3.20
>Sep 11 15:25:16 x-945g kernel: megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>Sep 11 15:25:16 x-945g kernel: megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>Sep 11 15:25:16 x-945g kernel: megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
>Sep 11 15:25:16 x-945g kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>Sep 11 15:25:16 x-945g kernel: ata1: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12 bmdma 0x000000000001fea0 irq 20
>Sep 11 15:25:16 x-945g kernel: ata2: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32 bmdma 0x000000000001fea8 irq 20
>Sep 11 15:25:16 x-945g kernel: scsi0 : ata_piix
>Sep 11 15:25:16 x-945g kernel: scsi1 : ata_piix
>Sep 11 15:25:16 x-945g kernel: ATA: abnormal status 0x7F on port 0x000000000001fe27
>Sep 11 15:25:16 x-945g kernel: ATA: abnormal status 0x7F on port 0x000000000001fe27
>Sep 11 15:25:16 x-945g kernel: ata2.01: ATA-7: SAMSUNG HD040GJ/P, ZG100-34, max UDMA7
>Sep 11 15:25:16 x-945g kernel: ata2.01: 78125000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>Sep 11 15:25:16 x-945g kernel: ata2.01: configured for UDMA/133
>Sep 11 15:25:16 x-945g kernel: scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG HD040GJ/ ZG10 PQ: 0 ANSI: 5
>Sep 11 15:25:16 x-945g kernel: SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>Sep 11 15:25:16 x-945g kernel: sda: Write Protect is off
>Sep 11 15:25:16 x-945g kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 11 15:25:16 x-945g kernel: SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>Sep 11 15:25:16 x-945g kernel: sda: Write Protect is off
>Sep 11 15:25:16 x-945g kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 11 15:25:16 x-945g kernel:  sda: sda1 sda2 sda3 sda4 < sda5 >
>Sep 11 15:25:16 x-945g kernel: sd 1:0:1:0: Attached scsi disk sda
>Sep 11 15:25:16 x-945g kernel: sd 1:0:1:0: Attached scsi generic sg0 type 0
>Sep 11 15:25:16 x-945g kernel: Fusion MPT base driver 3.04.04
>Sep 11 15:25:16 x-945g kernel: Copyright (c) 1999-2007 LSI Logic Corporation
>Sep 11 15:25:16 x-945g kernel: Fusion MPT SPI Host driver 3.04.04
>Sep 11 15:25:16 x-945g kernel: Fusion MPT SAS Host driver 3.04.04
>Sep 11 15:25:16 x-945g kernel: ieee1394: raw1394: /dev/raw1394 device initialized
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>Sep 11 15:25:16 x-945g kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Sep 11 15:25:16 x-945g kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>Sep 11 15:25:16 x-945g kernel: ehci_hcd 0000:00:1d.7: debug port 1
>Sep 11 15:25:16 x-945g kernel: ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>Sep 11 15:25:16 x-945g kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Sep 11 15:25:16 x-945g kernel: usb usb1: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: hub 1-0:1.0: USB hub found
>Sep 11 15:25:16 x-945g kernel: hub 1-0:1.0: 8 ports detected
>Sep 11 15:25:16 x-945g kernel: USB Universal Host Controller Interface driver v3.0
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>Sep 11 15:25:16 x-945g kernel: usb usb2: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: hub 2-0:1.0: USB hub found
>Sep 11 15:25:16 x-945g kernel: hub 2-0:1.0: 2 ports detected
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>Sep 11 15:25:16 x-945g kernel: usb usb3: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: hub 3-0:1.0: USB hub found
>Sep 11 15:25:16 x-945g kernel: hub 3-0:1.0: 2 ports detected
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>Sep 11 15:25:16 x-945g kernel: usb usb4: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: hub 4-0:1.0: USB hub found
>Sep 11 15:25:16 x-945g kernel: hub 4-0:1.0: 2 ports detected
>Sep 11 15:25:16 x-945g kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>Sep 11 15:25:16 x-945g kernel: uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>Sep 11 15:25:16 x-945g kernel: usb usb5: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: hub 5-0:1.0: USB hub found
>Sep 11 15:25:16 x-945g kernel: hub 5-0:1.0: 2 ports detected
>Sep 11 15:25:16 x-945g kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
>Sep 11 15:25:16 x-945g kernel: usb 4-1: configuration #1 chosen from 1 choice
>Sep 11 15:25:16 x-945g kernel: usbcore: registered new interface driver usblp
>Sep 11 15:25:16 x-945g kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Sep 11 15:25:16 x-945g kernel: Initializing USB Mass Storage driver...
>Sep 11 15:25:16 x-945g kernel: usbcore: registered new interface driver usb-storage
>Sep 11 15:25:16 x-945g kernel: USB Mass Storage support registered.
>Sep 11 15:25:16 x-945g kernel: input: ATEN ATEN  CS-1716/08/04 as /class/input/input3
>Sep 11 15:25:16 x-945g kernel: input: USB HID v1.10 Keyboard [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-1
>Sep 11 15:25:16 x-945g kernel: input: ATEN ATEN  CS-1716/08/04 as /class/input/input4
>Sep 11 15:25:16 x-945g kernel: input: USB HID v1.10 Mouse [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-1
>Sep 11 15:25:16 x-945g kernel: usbcore: registered new interface driver usbhid
>Sep 11 15:25:16 x-945g kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Sep 11 15:25:16 x-945g kernel: usbcore: registered new interface driver gtco
>Sep 11 15:25:16 x-945g kernel: GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver berry_charge
>Sep 11 15:25:16 x-945g kernel: usbcore: registered new interface driver iowarrior
>Sep 11 15:25:16 x-945g kernel: PNP: No PS/2 controller found. Probing ports directly.
>Sep 11 15:25:16 x-945g kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Sep 11 15:25:16 x-945g kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Sep 11 15:25:16 x-945g kernel: mice: PS/2 mouse device common for all mice
>Sep 11 15:25:16 x-945g kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Sep 11 15:25:16 x-945g kernel: Intel 810 + AC97 Audio, version 1.01, 13:40:40 May 24 2007
>Sep 11 15:25:16 x-945g kernel: oprofile: using NMI interrupt.
>Sep 11 15:25:16 x-945g kernel: TCP cubic registered
>Sep 11 15:25:16 x-945g kernel: NET: Registered protocol family 1
>Sep 11 15:25:16 x-945g kernel: NET: Registered protocol family 10
>Sep 11 15:25:16 x-945g kernel: IPv6 over IPv4 tunneling driver
>Sep 11 15:25:16 x-945g kernel: NET: Registered protocol family 17
>Sep 11 15:25:16 x-945g kernel: Freeing unused kernel memory: 252k freed
>Sep 11 15:25:16 x-945g kernel: kjournald starting.  Commit interval 5 seconds
>Sep 11 15:25:16 x-945g kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Sep 11 15:25:16 x-945g kernel: ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
>Sep 11 15:25:16 x-945g kernel: EXT3 FS on sda2, internal journal
>Sep 11 15:25:16 x-945g kernel: kjournald starting.  Commit interval 5 seconds
>Sep 11 15:25:16 x-945g kernel: EXT3 FS on sda1, internal journal
>Sep 11 15:25:16 x-945g kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Sep 11 15:25:16 x-945g kernel: Adding 1582392k swap on /dev/sda3.  Priority:-1 extents:1 across:1582392k
>Sep 11 15:25:16 x-945g kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
>Sep 11 15:25:16 x-945g kernel: tg3: eth0: Link is up at 1000 Mbps, full duplex.
>Sep 11 15:25:16 x-945g kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Sep 11 15:25:16 x-945g kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Sep 11 15:25:16 x-945g smartd[3209]: smartd version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen 
>Sep 11 15:25:16 x-945g smartd[3209]: Home page is http://smartmontools.sourceforge.net/  
>Sep 11 15:25:16 x-945g smartd[3209]: Opened configuration file /etc/smartd.conf 
>Sep 11 15:25:16 x-945g smartd[3209]: Configuration file /etc/smartd.conf parsed. 
>Sep 11 15:25:16 x-945g smartd[3209]: Device: /dev/sda, opened 
>Sep 11 15:25:16 x-945g smartd[3209]: Device: /dev/sda, found in smartd database. 
>Sep 11 15:25:16 x-945g smartd[3209]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
>Sep 11 15:25:16 x-945g smartd[3209]: Monitoring 1 ATA and 0 SCSI devices 
>Sep 11 15:25:16 x-945g smartd[3211]: smartd has fork()ed into background mode. New PID=3211. 
>Sep 11 15:25:17 x-945g hpiod: 0.9.8 accepting connections at 50000... 
>Sep 11 15:25:18 x-945g hpiod: unable to ParDevice::Open hp:/par/ANY?device=/dev/parport0: No such device or address: io/hpiod/ppdevice.cpp 836 
>Sep 11 15:25:18 x-945g hpiod: unable to ParDevice::Open hp:/par/ANY?device=/dev/parport1: No such device or address: io/hpiod/ppdevice.cpp 836 
>Sep 11 15:25:18 x-945g hpiod: unable to ParDevice::Open hp:/par/ANY?device=/dev/parport2: No such device or address: io/hpiod/ppdevice.cpp 836 
>Sep 11 15:25:18 x-945g hpiod: unable to ParDevice::Open hp:/par/ANY?device=/dev/parport3: No such device or address: io/hpiod/ppdevice.cpp 836 
>Sep 11 15:25:19 x-945g gpm[3295]: *** info [startup.c(95)]: 
>Sep 11 15:25:19 x-945g gpm[3295]: Started gpm successfully. Entered daemon mode.
>Sep 11 15:25:20 x-945g avahi-daemon[3369]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>Sep 11 15:25:20 x-945g avahi-daemon[3369]: Successfully dropped root privileges.
>Sep 11 15:25:20 x-945g avahi-daemon[3369]: avahi-daemon 0.6.9 starting up.
>Sep 11 15:25:20 x-945g avahi-daemon[3369]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>Sep 11 15:25:20 x-945g avahi-daemon[3369]: dbus_bus_get(): Failed to connect to socket /usr/var/run/dbus/system_bus_socket: No such file or directory
>Sep 11 15:27:30 x-945g kernel: [drm] Initialized drm 1.1.0 20060810
>Sep 11 15:27:30 x-945g kernel: [drm] Initialized i915 1.9.0 20070209 on minor 0
>Sep 11 15:27:30 x-945g kernel: [drm] Used old pci detect: framebuffer loaded
>Sep 11 15:29:54 x-945g kernel: X[3520]: segfault at 0000000000000000 rip 00002b4b61875c2d rsp 00007fff49c63cf8 error 4
>Sep 11 16:02:09 x-945g kernel: mtrr: base(0xe0000000) is not aligned on a size(0x7b0000) boundary
>Sep 11 16:03:00 x-945g kernel: mtrr: base(0xe0000000) is not aligned on a size(0x7b0000) boundary
>Sep 11 17:20:54 x-945g kernel: X[6174]: segfault at 0000000000000000 rip 00002ac59c641c2d rsp 00007fff0ee95f28 error 4

Actions: View

Attachments on bug 12389: 11500 | 11501

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.